On Saturday 04 November 2006 19:55, Magnus Hoglund wrote:
> Hi,
>
> I did'nt have these options with 0.8.0 !
> I have them with 0.4.1 however...

Ah, OK. But still, please don't use them in any version. I assume 
ivtv-0.4.0 still works without these options, while ivtv-0.4.1 doesn't?

Assuming that is the case, then I'd like to have two logs: one for 0.4.0 
and one for 0.4.1, and in both cases with the msp3400 module 
option 'debug=2'. I'll be interesting to compare the two.

Thanks,

        Hans

>
> /Magnus
>
> Hans Verkuil wrote:
> > On Saturday 04 November 2006 19:20, Magnus Hoglund wrote:
> >> Hans Verkuil wrote:
> >>> On Saturday 04 November 2006 17:19, Magnus Hoglund wrote:
> >>>> I'm right now compiling a new kernel and ivtv-0.4.0 to start
> >>>> the tests at which version my sound starts failing...
> >>
> >> This process was quick... The sound dissappeared with
> >> 2.6.14 and ivtv-0.4.1... I have sound with 0.4.0...
> >>
> >> Also tried 2.6.15 with 0.4.1 and sound was missing...
> >>
> >> I should mention that I have an "options msp3400 once=1
> >> standard=0x08" in my /etc/modules.d/ivtv...
> >
> > Aargh! Please remove these options and try again with
> > 2.6.18/ivtv-0.8.0!
> >
> >> It looks like the msp3400-module detects different chips in 0.4.0
> >> and 0.4.1... Is this the cause of my problems perhaps?
> >
> > Naw, that's a bug in the msp3400 from ivtv-0.4.0. It just prints
> > the wrong version.
> >
> >     Hans
> >
> >> Regards, Magnus
> >>
> >> dmesg output:
> >>
> >> 0.4.0
> >>
> >> ivtv:  ==================== START INIT IVTV ====================
> >> ivtv:  version 0.4.0 (tagged release) loading
> >> ivtv:  Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1
> >> ivtv:  In case of problems please include the debug info
> >> ivtv:  between the START INIT IVTV and END INIT IVTV lines when
> >> ivtv:  mailing the ivtv-devel mailinglist.
> >> ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based)
> >> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ
> >> 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> >> tveeprom: ivtv version
> >> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582
> >> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22)
> >> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom
> >> = 0x74, v4l2 = 0x00400e17)
> >> tveeprom: audio processor = MSP4418 (type = 19)
> >> tveeprom: decoder processor = SAA7115 (type = 13)
> >> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> >> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> >> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> >> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> >> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> >> msp34xx: ivtv version
> >> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D)
> >> mode, simpler (G) no-thread mode
> >> msp34xx: $Id$ compiled on: Nov  4 2006 18:56:53
> >> ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40]
> >> ivtv0: loading /lib/modules/ivtv-fw-enc.bin
> >> ivtv0: Encoder revision: 0x02050032
> >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
> >> (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
> >> buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80
> >> x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM
> >> audio stream: 455 x 4608 buffers (2048KB total)
> >> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv
> >> i2c driver #0
> >> ivtv0: Initialized WinTV PVR 250, card #0
> >> ivtv:  ====================  END INIT IVTV  ====================
> >>
> >> 0.4.1
> >>
> >> ivtv:  ==================== START INIT IVTV ====================
> >> ivtv:  version 0.4.1 (tagged release) loading
> >> ivtv:  Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1
> >> ivtv:  In case of problems please include the debug info between
> >> ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> >> ivtv:  any module options, when mailing the ivtv-users
> >> mailinglist. ivtv0: Autodetected WinTV PVR 250 card (cx23416
> >> based)
> >> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ
> >> 18 tveeprom: ivtv version
> >> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582
> >> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22)
> >> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom
> >> = 0x74, v4l2 = 0x00400e17)
> >> tveeprom: audio processor = MSP4418 (type = 19)
> >> tveeprom: decoder processor = SAA7115 (type = 13)
> >> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> >> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> >> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> >> saa7115 5-0021: ivtv driver
> >> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> >> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> >> msp3400 5-0040: ivtv driver
> >> msp3400 5-0040: chip=MSP4418G-A2 +nicam +simple +simpler +radio
> >> mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2,
> >> addr=40] msp3400 5-0040: msp34xxg daemon started
> >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> >> ivtv0: Encoder revision: 0x02050032
> >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers
> >> (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
> >> buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80
> >> x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM
> >> audio stream: 455 x 4608 buffers (2048KB total)
> >> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv
> >> i2c driver #0
> >> ivtv0: Initialized WinTV PVR 250, card #0
> >> ivtv:  ====================  END INIT IVTV  ====================
> >>
> >>
> >>
> >> _______________________________________________
> >> ivtv-users mailing list
> >> [email protected]
> >> http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to