Hi, I did'nt have these options with 0.8.0 ! I have them with 0.4.1 however...
/Magnus Hans Verkuil wrote: > On Saturday 04 November 2006 19:20, Magnus Hoglund wrote: >> Hans Verkuil wrote: >>> On Saturday 04 November 2006 17:19, Magnus Hoglund wrote: >>>> I'm right now compiling a new kernel and ivtv-0.4.0 to start >>>> the tests at which version my sound starts failing... >> This process was quick... The sound dissappeared with >> 2.6.14 and ivtv-0.4.1... I have sound with 0.4.0... >> >> Also tried 2.6.15 with 0.4.1 and sound was missing... >> >> I should mention that I have an "options msp3400 once=1 >> standard=0x08" in my /etc/modules.d/ivtv... > > Aargh! Please remove these options and try again with 2.6.18/ivtv-0.8.0! > >> It looks like the msp3400-module detects different chips in 0.4.0 and >> 0.4.1... Is this the cause of my problems perhaps? > > Naw, that's a bug in the msp3400 from ivtv-0.4.0. It just prints the > wrong version. > > Hans > >> Regards, Magnus >> >> dmesg output: >> >> 0.4.0 >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.4.0 (tagged release) loading >> ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 >> ivtv: In case of problems please include the debug info >> ivtv: between the START INIT IVTV and END INIT IVTV lines when >> ivtv: mailing the ivtv-devel mailinglist. >> ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) >> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 >> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> tveeprom: ivtv version >> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 >> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) >> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = >> 0x74, v4l2 = 0x00400e17) >> tveeprom: audio processor = MSP4418 (type = 19) >> tveeprom: decoder processor = SAA7115 (type = 13) >> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) >> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] >> msp34xx: ivtv version >> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, >> simpler (G) no-thread mode >> msp34xx: $Id$ compiled on: Nov 4 2006 18:56:53 >> ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40] >> ivtv0: loading /lib/modules/ivtv-fw-enc.bin >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers >> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 >> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >> 455 x 4608 buffers (2048KB total) >> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c >> driver #0 >> ivtv0: Initialized WinTV PVR 250, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> >> 0.4.1 >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.4.1 (tagged release) loading >> ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) >> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 >> tveeprom: ivtv version >> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 >> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) >> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = >> 0x74, v4l2 = 0x00400e17) >> tveeprom: audio processor = MSP4418 (type = 19) >> tveeprom: decoder processor = SAA7115 (type = 13) >> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >> saa7115 5-0021: ivtv driver >> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) >> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] >> msp3400 5-0040: ivtv driver >> msp3400 5-0040: chip=MSP4418G-A2 +nicam +simple +simpler +radio >> mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2, >> addr=40] msp3400 5-0040: msp34xxg daemon started >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers >> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 >> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >> 455 x 4608 buffers (2048KB total) >> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c >> driver #0 >> ivtv0: Initialized WinTV PVR 250, card #0 >> ivtv: ==================== END INIT IVTV ==================== >> >> >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
