Hi guys, Thanks for your help on this. I tried the following:
* enable RCIE interrupt (on receive usart): it works, so it means interrupt (global) are enabled * enable i2c interrupt on start/stop works too (but I don't use them usually, only for debug purpose) * switching back to i2c without start/stop interrupt, it doesn't work (this is case at the beginning) In the last case, interrupts are triggered when there's an address match. So this may mean there's a address problem. As they say: "i2c problems are usually a matter of addressing". I've set "0x5C" for both slave and master. I can't dig more right now, so to be continued. Seb -- Sébastien LELONG http://www.sirloon.net http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
