On 5 Sep 2007 at 17:23, auld.timer wrote: > I've read a lot of messages about unconnected nets and most say the > trace is probably not connected to the center of the pin. My problem > seems to be different. > > I have no ERC errors, but I get a message on the through hole > components that the pads at x,y and x,y are not connected. The x,y > coordinates are the same for both pads. I interpret this to mean that > the top and bottom pads for the same hole are not connected. ie. the > hole is not plated. Anybody know how to fix this? > > Also, I have a problem connecting to internal planes. I selected the > proper layers for the via's and then selected the proper working layer > and created/filled a zone. It looks like there are connections, but > it still shows a ratsnest to the ground and power connections and I > have unconnected nets. I have deleted and gone through that process > twice. > > All help would be greatly appreciated. I had that problem and found I had accidently put 2 pads at the same location. Try deleting the component or pad at that location and seeing if a 2nd pad is there. Delete it and re-place your component.
Dave - WB6DHW <http://wb6dhw.com>
