If anyone's looking for John , they can enquire at the Nissan Car Club, as
he's a member.
Brett
At 20:59 21/03/00 +0800, you wrote:
>john muscat (he's been mix & matching datto's for years)
>
>
>
>
>>Albs
>>who built it ???
>>thanks
>>Mick
>>
>>Albs wrote:
>>
>>> the guy who made my l20b head z24 block motor has been doing this
>>> conversion for a while with no real promlems (I surpose don't go overbored
>>> when you bore it out)
>>>
>>> >The 'other' Datsun list usually cites a casting fault in the Z24 block
that
>>> >makes it undesirable - causes it to crack. Jason Gray in the US has a
>>> >website worth checking out if you're looking for a big cc L4 motor :
>>> >
>>> >http://home.att.net/~jason510/
>>> >
>>> >DF
>>> >
>>> >At 23:22 16/03/00 +1030, you wrote:
>>> >>the preffered approach to getting a 2.4 in your datto is to use the L20b
>>> >>block, Z24 crank, etc etc cos it is easier to register an L20b engine
>>>block
>>> >>than a big Z24 block.
>>> >>> my next dilemma is how to get a 2.4lL in my car without spending big
>>> >>> dollars on boring and stroking a L20B block and i know that u can
put a
>>> >>> l20 head on a z24 block but i don't know the details involved in the
>>> >>> swap also is there down sides to this conversion because it is not
very
>>> >>> common.
>>> >
>>> >
>>>
>>
>
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
