Won't the ECU's rpm/load maps be out for the various load/rpms compared to
the orig. 6 cylinder motor ? The torque at differnet rpms would be totally
diferent from the 4cyl to 6 cyl. Is the advance done via the dizzy, or ECU
? Does it use a airflow or Manifold air pressure sensor ? If it was an
aiflow, it'd need to be re-calibrated for the lower overall air flow
reduction.
Wardy
----- Original Message -----
From: "Luke Clough" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, April 09, 2000 1:03 PM
Subject: Re: L Series EFI Manifold
> To control how much fuel it's using, vary the fuel pressure with the
pressure
> relief valve in the fuel return line.
> Only problem is mine is stuffed (can't vary it) and the fuel pressure is
too
> high, consquently I'm using too much juice when I put my foot down.
>
> Luke Clough
>
> Zac Campbell wrote:
>
> > cool peter, this sounds like a very viable option. I'm surprised many
others
> > haven't done this.
> >
> > do you know much about the adaptability of the computer? I imagine when
> > using only 4 injectors it may run a bit lean on an L20b? excuse me, I am
not
> > the most efi literate person in the world!!
> >
> > zac
> >
> > ----- Original Message -----
> > From: Peter Parry <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Saturday, April 08, 2000 8:04 PM
> > Subject: Re: L Series EFI Manifold
> >
> > > ZAC it opens 3 injectors at each firing pulse so you disable 1 from
each
> > group
> > > of three and you have 4 cylinders worth It is not a sequential system
> > which
> > > squirts in order. each cylinder gets two squirts of petrol for each
> > firing.so
> > > there is a charge of fuel waiting for the inlet valve to open this
also
> > helps
> > > keep valves cool. For more info have a look at the manual
> > > Peter
> > >
> > > Zac Campbell wrote:
> > >
> > > > but then wouldn't the computer send pulses to the 5 + 6 cylinders?
or do
> > you
> > > > set it up so that the first four cylinders it sends to on the 6cyl
> > version
> > > > would be cylinders 1 3 4 2 ?
> > > > or are you talking about a different computer with the L24EFI setup?
> > > >
> > > > zac
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
