Gooday Matt,
You are absolutely correct and I made a big blooper last night with these
manifolds. There are two Skyline FJ's and only one S12 version.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Matt
Sent: Tuesday, 22 May 2001 4:46
To: [EMAIL PROTECTED]
Subject: Re: FJ20DET Manifolds
james,
there all skyline manifolds , the first one from autospeed has been 'cleaned
up' looks like he's remove alot of polution stuff on there. i have a pic of
the gazelle manifold if you want to see what they look like.
cheers
matt
-----Original Message-----
From: jamesf <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, 21 May 2001 9:12
Subject: Re: FJ20DET Manifolds
>Ok.. I thought there was only the 2 types to choose from... but
>I have found 3 different ones so far.... all factory.. how many
>others are there?
>
>http://www.autospeed.com/A_0455/P_1/article.html
>
>http://www.ozdat.com/ozdatonline/featurecars/jakeFJ/jakefj6.html
>
>http://www.ozdat.com/ozdatonline/featurecars/HenriFJ/henri_dat3.htm
>
>Anybody know what each type is from?
>
>regards
>James
>
>
>
>Terry Rudd wrote:
>
>> James,
>>
>> Only the DR30 engine was available only with factory i/c although I've
seen
>> up to 9 psi run on these engines without an i/c fitted. The DR30 i/c is a
>> lunchbox but even so it's surprising effective up to around 9-10 psi. I
>> chose that engine as it had a much better potential for coping with
moderate
>> boost (up to 1 bar) when fitted with a Cordia or Supra i/c. It has a
better
>> turbo stock, problem is the stock exhaust manifold is further rearward
and
>> is a bit of a pain to fit on a 1600. The lower C/R engine is out of the
S12
>> but the bigger exhaust housing is off the DR30. I've seen the other way
>> round done on a 1600 quite a few times as it's an easier fit on a manual
>> body. The factory inlet manifold is basically the same on either turbo
>> engine afaik, there are a couple of varieties on the NA engines though.
>>
>> regards
>> Terry
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]On Behalf Of jamesf
>> Sent: Monday, 21 May 2001 7:16
>> To: [EMAIL PROTECTED]
>> Subject: Re: FJ20DET Manifolds
>>
>> That's the question... Skyline or Gazelle.... though Custom
>> inlet might be an option down the track a bit...
>> But right now I want to get the best base engine... and
>> I have found I can get either one... So which is the best?
>>
>> Also were both of those available in Intercooled or non
>> intercooled versions from the Factory? or was it just the
>> gazelle one??
>> ... Cause I want the non intercooled version for the
>> 7:5 to 1 comp ratio and the bigger Exhaust housing on the
>> turbo...
>>
>> Any ideas?
>>
>> Regards
>> James
>>
>> Zac Campbell wrote:
>>
>> > I think James is referring to the Skyline vs Gazelle manifolds?
>> >
>> > zac
>> >
>> > ----- Original Message -----
>> > From: andrew smith <[EMAIL PROTECTED]>
>> > To: <[EMAIL PROTECTED]>
>> > Sent: Monday, May 21, 2001 3:46 PM
>> > Subject: Re: FJ20DET Manifolds
>> >
>> > > James,
>> > > Shorter inlet runners produce horsepower higher on the rev scale.Paul
>> > > Staneks fj20 1200 coupe has a manufacuted manifold that uses very
short
>> > > runners with a large plennum.
>> > > Andrew Smith
>> > >
>> > > jamesf wrote:
>> > >
>> > > > Hi List
>> > > > Just wondering which of the FJ20DET inlet manifolds
>> > > > is the better...the long or the short?
>> > > > which has the highest HP potential??
>> > > > regards
>> > > > James
>> > > > --
>> > > >
>> ________________________________________________________________________
>> > > >
>> > > > James Fitness
>> > > > Director
>> > > > Data Scribe Australia Pty Ltd
>> > > > http://www.datascribe.com.au
>> > > > Computers and Supplies
>> > > >
>> > > > OZDAT Online
>> > > > http://www.ozdat.com/ozdatonline/index.htm
>> > > >
>> > >
>>
>> --
>> ________________________________________________________________________
>>
>> James Fitness
>> Director
>> Data Scribe Australia Pty Ltd
>> http://www.datascribe.com.au
>> Computers and Supplies
>>
>> OZDAT Online
>> http://www.ozdat.com/ozdatonline/index.htm
>>
>
>--
>________________________________________________________________________
>
>James Fitness
>Director
>Data Scribe Australia Pty Ltd
>http://www.datascribe.com.au
>Computers and Supplies
>
>OZDAT Online
>http://www.ozdat.com/ozdatonline/index.htm
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
