terry,
you learn something new everyday lol, :)
matt
-----Original Message-----
From: Terry Rudd <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, 22 May 2001 10:14
Subject: RE: FJ20DET Manifolds
>Gooday Matt,
>
>You are absolutely correct and I made a big blooper last night with these
>manifolds. There are two Skyline FJ's and only one S12 version.
>
>regards
>Terry
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of Matt
>Sent: Tuesday, 22 May 2001 4:46
>To: [EMAIL PROTECTED]
>Subject: Re: FJ20DET Manifolds
>
>
>james,
>there all skyline manifolds , the first one from autospeed has been
'cleaned
>up' looks like he's remove alot of polution stuff on there. i have a pic of
>the gazelle manifold if you want to see what they look like.
>cheers
>matt
>-----Original Message-----
>From: jamesf <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Monday, 21 May 2001 9:12
>Subject: Re: FJ20DET Manifolds
>
>
>>Ok.. I thought there was only the 2 types to choose from... but
>>I have found 3 different ones so far.... all factory.. how many
>>others are there?
>>
>>http://www.autospeed.com/A_0455/P_1/article.html
>>
>>http://www.ozdat.com/ozdatonline/featurecars/jakeFJ/jakefj6.html
>>
>>http://www.ozdat.com/ozdatonline/featurecars/HenriFJ/henri_dat3.htm
>>
>>Anybody know what each type is from?
>>
>>regards
>>James
>>
>>
>>
>>Terry Rudd wrote:
>>
>>> James,
>>>
>>> Only the DR30 engine was available only with factory i/c although I've
>seen
>>> up to 9 psi run on these engines without an i/c fitted. The DR30 i/c is
a
>>> lunchbox but even so it's surprising effective up to around 9-10 psi. I
>>> chose that engine as it had a much better potential for coping with
>moderate
>>> boost (up to 1 bar) when fitted with a Cordia or Supra i/c. It has a
>better
>>> turbo stock, problem is the stock exhaust manifold is further rearward
>and
>>> is a bit of a pain to fit on a 1600. The lower C/R engine is out of the
>S12
>>> but the bigger exhaust housing is off the DR30. I've seen the other way
>>> round done on a 1600 quite a few times as it's an easier fit on a manual
>>> body. The factory inlet manifold is basically the same on either turbo
>>> engine afaik, there are a couple of varieties on the NA engines though.
>>>
>>> regards
>>> Terry
>>>
>>> -----Original Message-----
>>> From: [EMAIL PROTECTED]
>>> [mailto:[EMAIL PROTECTED]]On Behalf Of jamesf
>>> Sent: Monday, 21 May 2001 7:16
>>> To: [EMAIL PROTECTED]
>>> Subject: Re: FJ20DET Manifolds
>>>
>>> That's the question... Skyline or Gazelle.... though Custom
>>> inlet might be an option down the track a bit...
>>> But right now I want to get the best base engine... and
>>> I have found I can get either one... So which is the best?
>>>
>>> Also were both of those available in Intercooled or non
>>> intercooled versions from the Factory? or was it just the
>>> gazelle one??
>>> ... Cause I want the non intercooled version for the
>>> 7:5 to 1 comp ratio and the bigger Exhaust housing on the
>>> turbo...
>>>
>>> Any ideas?
>>>
>>> Regards
>>> James
>>>
>>> Zac Campbell wrote:
>>>
>>> > I think James is referring to the Skyline vs Gazelle manifolds?
>>> >
>>> > zac
>>> >
>>> > ----- Original Message -----
>>> > From: andrew smith <[EMAIL PROTECTED]>
>>> > To: <[EMAIL PROTECTED]>
>>> > Sent: Monday, May 21, 2001 3:46 PM
>>> > Subject: Re: FJ20DET Manifolds
>>> >
>>> > > James,
>>> > > Shorter inlet runners produce horsepower higher on the rev
scale.Paul
>>> > > Staneks fj20 1200 coupe has a manufacuted manifold that uses very
>short
>>> > > runners with a large plennum.
>>> > > Andrew Smith
>>> > >
>>> > > jamesf wrote:
>>> > >
>>> > > > Hi List
>>> > > > Just wondering which of the FJ20DET inlet manifolds
>>> > > > is the better...the long or the short?
>>> > > > which has the highest HP potential??
>>> > > > regards
>>> > > > James
>>> > > > --
>>> > > >
>>> ________________________________________________________________________
>>> > > >
>>> > > > James Fitness
>>> > > > Director
>>> > > > Data Scribe Australia Pty Ltd
>>> > > > http://www.datascribe.com.au
>>> > > > Computers and Supplies
>>> > > >
>>> > > > OZDAT Online
>>> > > > http://www.ozdat.com/ozdatonline/index.htm
>>> > > >
>>> > >
>>>
>>> --
>>> ________________________________________________________________________
>>>
>>> James Fitness
>>> Director
>>> Data Scribe Australia Pty Ltd
>>> http://www.datascribe.com.au
>>> Computers and Supplies
>>>
>>> OZDAT Online
>>> http://www.ozdat.com/ozdatonline/index.htm
>>>
>>
>>--
>>________________________________________________________________________
>>
>>James Fitness
>>Director
>>Data Scribe Australia Pty Ltd
>>http://www.datascribe.com.au
>>Computers and Supplies
>>
>>OZDAT Online
>>http://www.ozdat.com/ozdatonline/index.htm
>>
>>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
