Re: god bless webers!!!!!

[mick ralph]

Damien That really is the sweetest sound... WOT and a big overlap cam and i start dreaming that i am mick schumacher... What size is ur engine? Is it stock or worked Cam? Not sure about vacuum lines cos i don't use a booster but webers are renowned for poor manifold vacuum. I'd go with Malcolms suggestion but have u seen the article on fitting tubes between all the runners on the manifold to reduce the 'pulsing'? I've never done it so i can't comment. Chokes? I never do more than pump the throttle twice and turn the key and it always fires up instantly. But I reckon Melb winter mornings might test it out. Where are u? You don't need a return line for webers but u do need a fuel pressure regulator if using other than stock fuel pump. With a worked 2L engine on 45's a stock pump would struggle to keep up adequate fuel supply. If U increase the delivery rate you then put bigger loads on the needle and seats in the carbs which could lead to flooding problems. I know a guy who was running worn N&S's in his L20B with 45's. He reckoned he could put up with the fuel dripping till he could get round to it. One day he parked the car with the left side up higher than the right side and the carbs did their normal thing except the fuel poured into the cylinders.. When he came back to start the car, the fuel 'hydrauliced' and bent 2 rods... The moral of the story is   make sure the N&S are in good nick  and fit a regulator to the fuel supply line. and don't park with the left side higher..  hehe K&N filters seem to be the best. Buy them once, and so long as u tighten the cover screw properly and don't lose the covers, ( i lost my 2nd one  the other day) they should only need regular cleaning  and some care,  to last a lifetime. I got mine from Revolution Rip Off for anout $120 each I love the webers and have found them to be the most reliable carbs almost ever! Sounds like u are hooked too!  cheers Mick       ----- Original Message ----- From: damien cm To: [EMAIL PROTECTED] Sent: Tuesday, January 29, 2002 11:12 AM Subject: god bless webers!!!!! Good morning all, On Australia day I purchased some twin 45mm sidedraught webers. They had every thing to suit a 1600, so I bolted them straight on. After a three hour drive (and $25 in fuel!) I decided that there is nothing that sounds tougher than twin webers at full song!!! I have a few Weber questions; There is a T-piece on each of the manifold runners. They all connect and go to brake booster. The crank case ventilation hose also connects to the other end of this set up. I this in the interest of performance, or the enviroment? I have the choke set up, but seems to be unnecasary. Will I need it in winter, or should I take it of? My 1600 has a fuel return line, should I hook it up to the Webers? Does anyone have any K&N filters they want to sell, or know where to get them cheap? Thanks very muchly, Damien Chat with friends online, try MSN Messenger: Click Here --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------