----------
From:
Jim Little
Reply To:
[EMAIL PROTECTED]
Sent: Wednesday, June 12, 2002 16:36 PM
To:
[EMAIL PROTECTED]
Subject:
Re:
(resprays)
the guy who i bought my 1600 from had
recntly stripped his car back to metal, prime painted etc..did the works.
The final paint job ws not great, the
paint did not look too good.
Anyway i recently talked to a spray
painter about getting a respray, he actually came out to my house to give
her a look over...second time he has done this for me. He said that the body
was good and straight etc and he would be happy to rub her back and give her
a few coats of 2pak. thing is the original paint work was acrylic and i
figured you would have to get a 2pak undercoat. I offered to do the prep
work to save some money and he said he would have to do the prep work to
make sure it was good enough to spray over. The work would obviously be
guaranteed so i am wondering if this is really posible. ie 2pak over acrylic
primer etc
cheers all
mark krawczuk <[EMAIL PROTECTED]> wrote:
hi, my brother works as a spray
painter ( thats all he does, no body work)
at bruce lellman crash here in renmark, he
said that it depends on what
type of undercoat u use ( i.e 2 pak or acrylic) and over what u
spray the
undercoat.
if you prime over bog repairs ideally you should finnish
rubbing yoiur
bog work
with 120 grit or finer to minimize any sanding scratch
coming
back up thru
the paint at a later date.
24 hours should be long enough for
the primer to cure, wether 2pak or
acrylic.
if you get any shrinkage coming thru or map
edging , its probally more
likelly to be from the prep work , more so than the drying
time.
you can also run
innto trouble if you prime over acrylic paint that
has not had the edge feathered
properly.
alot of
people tend to blame the undercoat or dryingtime than the
actual
prep
work.
something to think about .!
mark k
----- Original Message
-----
From: "nat P."
To:
Sent: Wednesday, June
12, 2002 1:24 PM
Subject: Is there a Beater OR PAINTER
> Is there a Panel Beater AND/OR a
spray painter on the
> list!!!
>
> I
need to know some info, I alway leave the primer to
> dry for a least 24 hours before
I spray the top coat!
> Do I have to wait this long?
> Cheers NAT
>
> http://www.sold.com.au - SOLD.com.au
> - Find yourself a bargain!
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please
Note:-
Send
(un)subscribe requests to [EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/me! [EMAIL PROTECTED]/
---------------------------------------------------------------------
_____
SOLD.com.au - Find yourself a
bargain!
--membersozdat-------------------------------------------------------
OZDAT Mailing List
Please Note:-
Send
(un)subscribe requests to [EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
