I have had a RX7 series 4 Crank angle censor adapted to fit the Z18 Dizzy housing with good success. I was able to run either twin or single spark and run it direct fire through the computer. This really helped when I did some mods and made the pig rev abit (cam, valve springs, porting, headers, throttle body, and t4/t3. Its a bit doughy now but revs quite happily to 7500+ (Self limited) and made 174Kw atw. If I had not have done the ignition it would have kept breaking down at about 6...
On the other hand you may remember Steve Taylor, used to be on the list. He utilized a series 2 bluebird dizzy regraphed although from memory it needed a different shaft (too long??). His car with fuel only comp, injectors, i/c, throttle body, FJ turbo and some headwork made 150kw atw. Farely warm for a Z.
Depends how much work you can do??
Hope this helps
Simon
From: "David Costello" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Subject: dizzy question
Date: Sat, 28 Dec 2002 22:59:57 +1000
just wondering what the best ignition setup for a warm Z18ET would be? I've heard mention of using a modified FJ20DET dizzy? what other options are there? How would I go about removing the dizzy all together and using coil packs? Is that the best way to go?
also if anyone has read the article on the Z18ET bluebird on autospeed (http://www.autospeed.com/A_0427/P_1/article.html) it says the hole for the standard dizzy was blocked off and an RX7 S4 dizzy was used instead...if the hole was blocked up, where did they put the RX7 dizzy?
Sorry if these questions sound kinda basic, I've never had any experience modifying ignition setups, always just had it done for me. But on my new car I wanna do everything that I possibly can myself.
Dave
_________________________________________________________________
The new MSN 8: smart spam protection and 3 months FREE*. http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=7474&SU= http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_smartspamprotection_3mf
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
