Simon,

Are you and the other Sydney boys heading up to the Nissan/Datsun
Nationals in QLD this year.

Cheers
Trev



On Mon, 2002-12-30 at 18:01, simon waterhouse wrote:
> David,
> 
> I have had a RX7 series 4 Crank angle censor adapted to fit the Z18 Dizzy 
> housing with good success. I was able to run either twin or single spark and 
> run it direct fire through the computer. This really helped when I did some 
> mods and made the pig rev abit (cam, valve springs, porting, headers, 
> throttle body, and t4/t3. Its a bit doughy now but revs quite happily to 
> 7500+ (Self limited) and made 174Kw atw. If I had not have done the ignition 
> it would have kept breaking down at about 6...
> 
> On the other hand you may remember Steve Taylor, used to be on the list. He 
> utilized a series 2 bluebird dizzy regraphed although from memory it needed 
> a different shaft (too long??). His car with fuel only comp, injectors, i/c, 
> throttle body, FJ turbo and some headwork made 150kw atw. Farely warm for a 
> Z.
> 
> Depends how much work you can do??
> 
> Hope this helps
> 
> Simon
> 
> 
> 
> 
> 
> 
> >From: "David Costello" <[EMAIL PROTECTED]>
> >Reply-To: [EMAIL PROTECTED]
> >To: <[EMAIL PROTECTED]>
> >Subject: dizzy question
> >Date: Sat, 28 Dec 2002 22:59:57 +1000
> >
> >just wondering what the best ignition setup for a warm Z18ET would be? I've 
> >heard mention of using a modified FJ20DET dizzy? what other options are 
> >there? How would I go about removing the dizzy all together and using coil 
> >packs? Is that the best way to go?
> >
> >also if anyone has read the article on the Z18ET bluebird on autospeed 
> >(http://www.autospeed.com/A_0427/P_1/article.html) it says the hole for the 
> >standard dizzy was blocked off and an RX7 S4 dizzy was used instead...if 
> >the hole was blocked up, where did they put the RX7 dizzy?
> >
> >Sorry if these questions sound kinda basic, I've never had any experience 
> >modifying ignition setups, always just had it done for me. But on my new 
> >car I wanna do everything that I possibly can myself.
> >
> >Dave
> >
> 
> 
> _________________________________________________________________
> The new MSN 8: smart spam protection and 3 months FREE*.  
> http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=7474&SU= 
> 
>http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_smartspamprotection_3mf
> 


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to