The sandwich plate itself sits at about the same height as the  
cooler. I've done a cold crank with my turbo oil line (3/16") open  
(first port on from the filter in the oiling system) and saw no  
visible drop or pause in oil flow. Gauge shows nearly instant oil  
pressure on startup... and the pump is shimmed. That was enough to  
satisfy my concerns with oil flow on startup. Nothing unusual in 2k  
miles with two oil changes, magnetic plug and compression.

I've run with and without the cooler. Temp drop with 75f ambient is  
~35f. Perhaps it could be more efficient, but that seems like a big  
drop for a 3" x 11" cooler.
http://www.racerpartswholesale.com/product/2554/TRU_Cool_Oil_Coolers

Ultimately I plan to install a mercedes cooler in the similar  
configuration as yours (Russ). Everything was ready to go in and then  
I realized that the filler neck on my rad needs to be removed for the  
cooler to fit. Doh! As usual, it's all just waiting on me.

open space next to rad:
http://i158.photobucket.com/albums/t86/m2cupcar/oilcoolerspot.jpg

cooler in position... almost:
http://i158.photobucket.com/albums/t86/m2cupcar/oilcoolermount2.jpg
http://i158.photobucket.com/albums/t86/m2cupcar/radfillerhump.jpg
http://i158.photobucket.com/albums/t86/m2cupcar/oilcoolermount1.jpg

Rob


On May 13, 2008, at 12:31 PM, Russ wrote:

> Interesting point... even when oil flows through it, there likely  
> will be a
> large air pocket still in the cooler, reducing efficiency.
>
> I have mine sitting sideways, fed from the bottom (in the STi), so  
> air is
> pushed up and out.
>
> www.grayforge.com/axis/IMG_0785.JPG
>
> Also in this image is the check valve for the Accusump.
>
> Russ
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to