thanks that info helps i will get this car going again. car was running fine to me. last drive i came off freeway to oil light and i ran the car near idle for almost a minute while getting off road. turned out im carrier had no bolts so it tried to pop out and knicked some of im shaft gear which was in pan. i always had to get car smogged but i had to get a cat fitted because it didnt have one.
i didnt check compression i guess taking effort to turn over by hand with ratchet isnt enough? car did run fine again after i fixed im shaft and before i yanked cams. i did not try the aftermarket chip i figured it would run like crap, guess its worth a try? is it possible somebody did work inside head for aftermarket cams to cause me problems? -- You received this message because you are subscribed to the Google Groups "MK2-16v" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/mk2-16v. To view this discussion on the web visit https://groups.google.com/d/msgid/mk2-16v/b99400ec-e5eb-41a6-b6bb-190010f82dda%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
