Date: Thu, 29 Jun 2000 06:56:30 +0700
From: "Ronald C.Dailey" <[EMAIL PROTECTED]>
Subject: Re: Timeout Expired
On 2000-06-29 [EMAIL PROTECTED] said:
>Date: Thu, 29 Jun 2000 03:25:54 -600
>Hello, everyone.
>I've used the latest XT version of Net-Tamer on a PC/XT successfully
>using a ZOOM 2400 bps modem and Uncle Dave's suggested string for
>it. However, when trying to upgrade to either a US Robotics Courier
>HST or a US Robotics Sportster 9600, no matter what I've tried, I
>continue to get "timeout expired" and "Error in authentication"
>messages. I've used the "DELAY 10, PPP" script to dial on with the
>ZOOM 2400 with no problem. Why can't I get these other modems to
>work? I know that this PC/XT can handle a faster modem, since I've
>heard others do it.
>What am I missing?
You need to know more about what protocols these USR modems support. If
both are HST only for 9600 or higher, then you may not be able to do
better than a 2400 connect to any ISP. HST was a proprietary USR
protocol. If the modems support V.32, than you might be able to get a
9600 connect, but some ISPs block anything below 14,400 V.32bis and some
won't allow any connect less than V.34. You say you did get a 2400
connect, however, so your ISP doesn't block lower connection rates.
Ronald Dailey
--
RCD
Net-Tamer V 1.12.0 - Registered
********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************
