Do you have a picture of this mess? I am now curious...
----- Original Message -----
From: Kyle Munz
To: [email protected]
Sent: Wednesday, October 01, 2008 10:45 AM
Subject: [Nighthawk Lovers] Re: Fuel Line size?
Taking them off isn't the part I'm reluctant to do. Its fighting those damn
Y-shaped intake tubes back on that I'm sweating.
-Kyle
On Wed, Oct 1, 2008 at 11:43 AM, Creative Residential Designs <[EMAIL
PROTECTED]> wrote:
You'll let used to it Kyle...the last time I took my carbs off it took me
20 minutes. HotrodMamma..
----- Original Message -----
From: Kyle Munz
To: [email protected]
Sent: Tuesday, September 30, 2008 10:54 PM
Subject: [Nighthawk Lovers] Re: Fuel Line size?
Greeeeeat, so I gotta take the carbs back off. Seriously, anyone near Phx
with a strong right hand? >:)
-Kyle
On Tue, Sep 30, 2008 at 11:04 PM, <[EMAIL PROTECTED]> wrote:
Seems like the wrong T fitting. I've rehabed 3 or 4 sets of these and
they all had the same 1/4" fitting, black in color
On 9/30/08, Kyle Munz <[EMAIL PROTECTED]> wrote:
All I can guess is that the previous had to replace that fitting at
one point and just grabbed whatever was handy. The bike came with its share of
Yamaha parts on it, so he wasn't picky about what he used.
-Kyle
On Tue, Sep 30, 2008 at 10:42 PM, <[EMAIL PROTECTED]> wrote:
I'm not sure why the two fittings would be different sizes. I have
a couple of the old and age hardened oem lines that are only about 6" long that
are the same size on both ends. I have a diagram in my Honda manual pg 4-12
showing the hose in the upper right also in the Clymer manual pg 178 fig 53.
Previous owners can be troublesome, mine was
On 9/30/08, Kyle Munz <[EMAIL PROTECTED]> wrote:
So I'm aright in assuming the nipple on the 'T' between the carbs
should be the same as the one on the fuel shut off valve right? I really need
someone in Phx to slap the previous owner for me...
-Kyle
On Tue, Sep 30, 2008 at 6:19 PM, <[EMAIL PROTECTED]> wrote:
Mine(replaced when I did carbs in spring) is 1/4". Originally
probably metric between 1/4 and 5/16. The breathers are the same. I have 2 sets
in the garage now and the fittings are the same as I have on tha bike now.
On 9/30/08, Kyle Munz <[EMAIL PROTECTED]> wrote:
While messing around on the bike I decided to clean up the
fuel line. The one it came with had what I assumed was a brass coupler in the
middle of it for some reason. I took it off, and it's not a coupler, it's
threaded on one end. Got to looking at it, and the white plastic 'T' between
the #2 and #3 carbs where the fuel line hooks up is bigger than 5/16". The
previous owner must have fancied this brass thingy as a reducer of some sort.
I've got plenty of 5/16" fuel hose, and could run a new one, but it won't hook
up to the carbs. Can anyone tell me if this is correct? Shouldn't it be 5/16"
all around or is this the plastic 'T' on my carbs the wrong one?
-Kyle
-83CB650SC
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---
