On 01/11/2007, Josephblack <[EMAIL PROTECTED]> wrote:
> On 01/11/2007, Timothy Normand Miller <[EMAIL PROTECTED]> wrote:
> > On 10/31/07, Michael Meeuwisse <[EMAIL PROTECTED]> wrote:
> >
> > [snip]
> > > A very big part of this information must be available *somewhere* snip
>
> With regard to hardware, we do have this page:
> http://wiki.opengraphics.org/tiki-index.php?page=OGD1+components+guide
>
> Now that we have a final board, we probably should update it and add
> the information there. Anyone can do so,snip>
> once again here are the links to the schematic and BOM
> http://www.traversaltech.com/doc/DC-001-0001.pdf
> http://spreadsheets.google.com/pub?key=ps980ejSIf-3DeoBkURvDZQ
>
snip> If you see a significant component as shown in the picture not named
> and listed below, add it. If you are not sure, snip Ask in the mailing list 
> if you
> need help or have noticed a correction for the illustration.
>
> jb

I have adding a few items from the Bill of Materials. Working on the
board diagram I have done/added to A, B, D, D,and E. This is
admittedly rather easy as most of the significant bits are the IC's,
and these are labelled as IC1, IC2 etc in the BOM.

I dont have the time to check the datasheets but I notice (E) the
Samsung SDRAM Is k4h561638F and the link we have is to K4H561638H.
Perhaps someone will be able to remember/give an opinion if they are
the same? (sorry cant rember and brain is offline)

Some further tasklets if you want to help/join in:
Anyone want to look up the recent post about a chip that Howard said
was similar to the tv chip and add the link to public datasheet of
that one?
Find a links to the datasheet for the parts we have detailed. Add the
link to the page!
Check the bill of materials and Add the details to F, G etc... (all
you need is good eyesight and we will help you out)

come on in, the water is warm<g>

jb
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)

Reply via email to