> Reply-to: <[EMAIL PROTECTED]> (PCI PowerMacs) > To: <[EMAIL PROTECTED]> (PCI PowerMacs) > Date: Wed, 24 Oct 2001 23:18:46 -0700 > Subject: Re: Printer Serial Port on 8600 is damaged > From: "Andrew W. Hill" <[EMAIL PROTECTED]>
> Theres a guy in Canada that could do it if it were just a loose solder > joint. his name is Jason Pero <[EMAIL PROTECTED]>. I can't personally > vouch for his work, but he's a great guy and he sure sounds like he > knows what he's doing. It might be cheaper than a whole motherboard. > Peace > Aqua Thanks Aqua, Kim, Anyway, if you decide to send off the logicboard w/ that bad port, I can replace the port w/ good one off one of duff boards I accumlated over the months. All I ask is favor in return mac part of your offer in return for a payment. Cheers, Jason > > On 2001.10.23, at 10:34, Kim Blutreich wrote: > > > Hi folks > > It seems that the printer port on my 8600/300 is damaged. This is not a > > software problem - the connector itself appears damaged. I can wiggle > > the Snip.. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
