Yea, the auto-router is broken.  All the optional menu items "Net...",
"Connection", "Component", and "Area" will route the whole board.
Of course after doing all that work, it comes back with a cross hair
and expects you to pick another thing to route.  Sigh...

At least the "Stop", and "Restart" work.

Jeff Stout


----- Original Message -----
From: "Ian Wilson" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Thursday, January 24, 2002 5:37 PM
Subject: Re: [PEDA] Auto router


> On 03:44 PM 24/01/2002 -0600, Ted Tontis said:
> ><..snip..> I try to auto
> >route area, and all I get is a bunch of garbage. Protel still try's to
route
> >over the keep out area, also Protel is not content with auto routing the
> >area I have selected  <..snip..>
>
>
> Route-Area has never worked for me either - it always bleeds out and
routes
> everything.  I am not sure that I have seen anything but Route-All
behavior
> even if you try to route a single connection - but I don't use the router
> enough to know if this is still the case.
>
> Ian
>


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to