On 01:58 PM 8/06/2002 -0700, Dennis Saputelli said:
>boy that's a great point pat
>
>i do them on doubles a lot but might have blown it on multi if it ever
>came up
>
>of course a board shop would never let that get out would they ? :)

Wanna bet?  On an early board I did (years ago) I forgot to pull the plane 
way from the plated rout - shorts galore.

Never forgotten it since.  Haven't used that manufacturer much since either.

Ian Wilson

><..snip..>
> > You didn't mention weather it was a multilayer board. If it is, I
> > just wanted to point out that Protel doesn't recognize the slot and
> > you will have to add clearances on plane layers and keepouts on
> > signal layers.
> >
> > P Lyons   Jayhawk Design
> >
>--
>___________________________________________________________________________
>www.integratedcontrolsinc.com            Integrated Controls, Inc.
>    tel: 415-647-0480                        2851 21st Street
>       fax: 415-647-3003                        San Francisco, CA 94110

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to