Ok, yea, I didn't try to compile anything in Protel with the WINCUPL's version of Atmel.DL.
Could you do me a favor and email me Atmel's Protel version of Atmel.dl? I don't want to download a 45Mb file, find a suitable Computer in which to install Protel, just to get a 300K file. Thanks, Jeff Stout ----- Original Message ----- From: "matt" <[EMAIL PROTECTED]> To: "Protel EDA Forum" <[EMAIL PROTECTED]> Sent: Wednesday, June 12, 2002 8:39 PM Subject: Re: [PEDA] Protel PLD/CUPL Question > The Wincupl Atmel.DL file is not working when I try to compile . The one > that works is another file, called also Atmel.DL , from the Atmel free > Protel download . It is in the library\pld folder and that one works all the > way to successful compile. I just copied the Atmel.dl file from the > Atmel/Protel trial installation to another machine which was runnign the > real Protel 99se sp6 , and presto, all atmel clpd's came up . > > After looking into these files I came to the conclusion that wincupl is > using a newer version of cupl than atmel/protel, so the atmel.dl file from > wincupl doesn't work with protel. The Atmel Protel and the real Protel are > the same (sp6) and therefore the libraries are probably interchangeable. > > Matt Tudor, MSEE > http://www.gigahertzelectronics.com > [snip] ************************************************************************ * Tracking #: A05FAE467776804193772C98E01E3B7B416198B7 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
