You must import the gerber files into Camtastic to view them. The following is found from the Protel help under gerber and digging through the links at the bottom:
Top Overlay .GTO Bottom Overlay .GBO Top Layer .GTL Bottom Layer .GBL Mid Layer 1, etc. .G1, .G2, etc Power Plane 1, etc. .GP1, GP2, etc Mechanical Layer 1, etc. .GM1, .GM2, etc Top Solder Mask .GTS Bottom Solder Mask .GBS Top Paste Mask .GTP Bottom Paste Mask .GBP Drill Drawing .GDD Drill Drawing; Top to Mid 1, Mid2 to Mid 3, etc. .GD1, GD2, GD3, etc. Drill Guide .GDG Drill Guide; Top to Mid 1, Mid 2 to Mid 3, etc .GG1, GG2, GG3, etc. Pad Master, Top .GPT Pad Master, Bottom .GPB Keep Out Layer .GKO Gerber Panels .P01, .P02, etc. My regards, Steve Smith, C.I.D. Product Engineer Staco Energy Products Co. 301 Gaddis Boulevard. Dayton, OH 45403 Telephone: (937) 253-1191 Ext. 158 Fax: (937) 253-1723 E-mail: [EMAIL PROTECTED] Web Site: www.stacoenergy.com & www.stacopower.com > -----Original Message----- > From: Ray Mitchell [mailto:[EMAIL PROTECTED] > Sent: Wednesday, April 21, 2004 12:20 PM > To: [EMAIL PROTECTED] > Subject: [PEDA] Viewing Gerber Files > > > In 99SE how do I view the Gerber Files I've produced? > Clicking on them > merely displays their text content rather than a graphic > view. Also, where > can I find a legend that describes which Gerber file > extensions correspond > to which layers/planes in the original PCB layout? > > Thanks, > Ray > > Ray Mitchell > Engineer, Code 2732 > SPAWAR Systems Center > San Diego, CA. 92152 > (619)553-5344 > [EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
