On Wed, Jun 8, 2011 at 1:58 PM, Steve Palincsar <palin...@his.com> wrote: > On Wed, 2011-06-08 at 13:52 -0400, Seth Vidal wrote: >> >> Is this possible with the build-your-own cassettes that harris sells? >> >> http://www.sheldonbrown.com/harris/k7.html#sprockets > > > Those are cassette sprockets. I doubt they fit a freewheel body - ANY > freewheel body, never mind any specific freewheel body you might happen > to have. If you will recall, there wasn't just one SunTour Cog Board - > the sprockets for the different Sun Tour freewheel bodies themselves > were different. And that's just Sun Tour. What about Shimano, Regina, > and so on? >
Sorry, Iwas not suggesting them for freewheels. I was enamored of the idea of building-my-own cassette and only replacing the cogs which are being used the most. hence, my question. sorry for invading the thread. -sv -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.