In reading the reviews, the book/CD set got the most praise. However,
from the reviews, it sounds like it needs to be updated.
Lloyd Hayes
Email: [EMAIL PROTECTED]
URL: http://TalkingStaff.bravehost.com
E-FAX Number: (208) 248-6590
Web Journal: http://lloyd_hayes.bravejournal.com/
[EMAIL PROTECTED
Hi,
Is it possible to create a new proc entry under /proc ?
If yes, then how to do that ?
Please tell me the relevant documents for this .
--
Regards,
N Ravi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
--- [EMAIL PROTECTED] escribió: >
> Hi
>
> I'm trying to install FreeBSD 4.10 on an older
> computer with a 852 MB hard disk.
> According to the handbook, 250 MB should suffice for
> text mode only.
> However, both the "User" and (retried) "Minimal"
> distributions left me with no space in /usr
>
Hi,
You just sent an email to my [EMAIL PROTECTED] account, which
is now being managed by my Mailblocks spam-free email service. (If you didnt
recently send a message to me, please see the Note below*.)
Because this is the first time you have sent to this email account, please
confirm yoursel
Hi folks, have a few problems about 2 ports, one is editor/AbiWord2, the
other is security/nss, I compiled them from ports on FBSD4.8 and I got:
--for aibword---
ie_imp_MsWord_97.cpp: In method `int
IE_Imp_MsWord_97::_beginPara(_wvParseStruct *, unsigned int, void *,
int)':
ie_imp_MsWord_97.cpp:250
I use freebsd 4.8 stable as a server it runs many services or used to,
Apache, bincimap, postfix, just to name a few. It seems to run natd and
route packets ok to the internal network that it is attached too.
However I does not seem to be functioning properly as a web server or
email server.
I use freebsd 4.8 stable as a server it runs many services or used to,
Apache, bincimap, postfix, just to name a few. It seems to run natd and
route packets ok to the internal network that it is attached too.
However I does not seem to be functioning properly as a web server or
email server.
On Sat, 19 Jun 2004 22:55:27 -0400, David Snyder <[EMAIL PROTECTED]> wrote:
>
> I installed a minimal FreeBSD 5.2.1
>
> Then installed Openldap21-server from ports with
> # make install clean
>
> Then installed a script
> cp /usr/ports/net/openldap21-server /usr/local/etc/rc.d/slapd.sh
>
> conf
On Sun, 20 Jun 2004, Matthew Dillon wrote:
> Hmm. Well, you can try calling madvise(... MADV_WILLNEED), that's what
> it is for.
>
> It is usually a bad idea to try to populate the page table with all
> resident pages associated with the a memory mapping, because mmap()
>
Hmm. Well, you can try calling madvise(... MADV_WILLNEED), that's what
it is for.
It is usually a bad idea to try to populate the page table with all
resident pages associated with the a memory mapping, because mmap()
is often used to map huge files... hundreds of megabytes
On Sunday 20 June 2004 05:21, Alex wrote:
> Hello to all,
>
> Plese say me how to correctly start httpd and mysqld with system
> sturtup... Where i need register it? (maybe in rc.conf or inet.d ?)
> And what i need to write in that file?
> Thanks!
You didn't mention what version of FreeBSD you're
Greetings and salutations;
I am having a puzzling issue with natd under FreeBSD
5.2, in which it will translate icmp and udp packets
just fine, but tcp connections from the inside network
to the outside world cannot be established. I can
lookup hostnames, ping etc. from the internal client
box, bu
On 20 Jun 2004 at 15:50, Jim Trigg wrote:
> --On Sunday, June 20, 2004 12:10 AM -0700 Dan Langille <[EMAIL PROTECTED]>
> wrote:
>
> > These are the articles posted during this period:
> >
> > 15-Jun : IBM ThinkPad T41
> > Installing and configuring FreeBSD and XFree86
> > http://freebs
On Sun, Jun 20, 2004 at 03:56:43PM -0400, Chuck Swiger wrote:
> Lewis Thompson wrote:
> [ ... ]
> >>Does the script set $PATH to include the location where python is? If
> >>you don't list /usr/local/bin explicitly, this may be the problem...
> >
> >No, PATH doesn't get set but if I run it as /us
On Sunday 20 June 2004 02:35 pm, you wrote:
=
= :I this how things are supposed to be, or will mmap() become more
= :efficient eventually? Thanks!
= :
= : -mi
= It's hard to say. mmap() could certainly be made more efficient, e.g.
= by faulting in more pages at a time to reduce the ac
[EMAIL PROTECTED] writes:
> I'm trying to install FreeBSD 4.10 on an older computer with a 852
> MB hard disk.
> According to the handbook, 250 MB should suffice for text mode only.
> However, both the "User" and (retried) "Minimal" distributions left
> me with no space in /usr
> I used th
Mr. Schmoe
I am sure I sent this but never saw it post to the list; so I try again.
http://sixshooter.v6.thrupoint.net/jeroen/faq.html
cheers,
reed
Joe Schmoe wrote:
Quick question - when I run `mount` or view /etc/fstab in fbsd 5.x, I just see "ufs"
as the filesystem type. How can I get some kin
Alison Lloyd wrote:
Hiya
I'm trying to get a FreeBSD box set up as a router between my cable
internet connection and my home LAN. I'm using a Compaq Professional
Workstation 5000 (yes, the Pentium Pro thingy), which I've installed an
extra NIC into. The output from uname -a is:
FreeBSD gorgonzola
On Wed, Jun 16, 2004 at 01:32:58AM +0100, Robert Downes wrote:
> JJB wrote:
>
> >Fundamentally his keep-state rules work and yours don't.
> >
> I have used his script exactly, modifying only for the differences in my
> ISP's addresses. Everything works as before, and still the check-state
> rule
The problem is I'm not a system developper either, and I only had the
iso images for installation, so I will have to find a way to apply the
patch.
You'll need the kernel sources installed. Then apply the patch and then
re-compile the kernel. Basically you just need to add on line of code in
Hiya
I'm trying to get a FreeBSD box set up as a router between my cable
internet connection and my home LAN. I'm using a Compaq Professional
Workstation 5000 (yes, the Pentium Pro thingy), which I've installed an
extra NIC into. The output from uname -a is:
FreeBSD gorgonzola 4.9-RELEASE FreeB
On Thu, Jun 17, 2004 at 04:52:24PM -0500, Eric Crist wrote:
> On Thursday 17 June 2004 10:41, Nagilum wrote:
> > Hi Eric,
> >
> > The base version of openssh is updated frequently (especially if any
> > vulnerabilities are discovered), so why bother with the port?
> >
> > Kind regards,
> > Alex.
>
On Fri, Jun 18, 2004 at 02:48:56PM +0900, Rob wrote:
>
> Hi,
>
> After I purchased a brandnew harddisk, I decided to also try out 5-current
> as the new OS on this disk.
>
> Installing system went all fine and smooth (5.2.1 install, then cvsupped to
> current), and compiled/installed new world a
Alex wrote:
Hello to all,
Plese say me how to correctly start httpd and mysqld with system
sturtup... Where i need register it? (maybe in rc.conf or inet.d ?)
And what i need to write in that file?
Thanks!
If you have an init script installed in /usr/local/etc/rc.d, it should
be starting automa
Brett Wiggins wrote:
hello,
I am having some problems with startkde and kdm. When I run
startkde i get the following outpit;
xset: unable to open dispaly ""
xsetroot: unable to open display ''
startkde: starting up...
ksplash cannot connect to X server
kdeinit: Aborting. $DISPLAY is not set
Hello to all,
Plese say me how to correctly start httpd and mysqld with system
sturtup... Where i need register it? (maybe in rc.conf or inet.d ?)
And what i need to write in that file?
Thanks!
--
Best regards,
Alexandr mailto:[EMAIL PROTECTED]
___
On Sun, Jun 20, 2004 at 03:41:53PM -0400, Jerry McAllister wrote:
> >
> > Hi
> >
> > I'm trying to install FreeBSD 4.10 on an older computer with a 852 MB hard
> > disk.
> > According to the handbook, 250 MB should suffice for text mode only.
> > However, both the "User" and (retried) "Minimal"
Phil Schulz a écrit :
http://www.asus.com/prog/spec.asp?m=Pundit&langs=01
-> Chipset SIS 651/962
-> Lan Broadcom BCM4401
Try to apply the attached patch to /sys/dev/ata/ata-dma.c
Neither do I have a mainboard w/ the same chipset as yours nor do I have
any PC running RELENG_4 atm. But I had to ap
hello,
I am having some problems with startkde and kdm. When I run
startkde i get the following outpit;
xset: unable to open dispaly ""
xsetroot: unable to open display ''
startkde: starting up...
ksplash cannot connect to X server
kdeinit: Aborting. $DISPLAY is not set
Warning: con
Kris Kennaway <[EMAIL PROTECTED]> wrote:
On Wed, Jun 20, 2001 at 11:44:22AM +0300, Alex wrote:
[...]
You're living in the past, man!
Heh! Amusing turn of phrase, this.
--
-Chuck
PS: In case the phrase he used doesn't translate, out of pity for
interpreting foreign languages
Lewis Thompson <[EMAIL PROTECTED]> wrote:
> On Sun, Jun 20, 2004 at 03:01:54PM -0400, Chuck Swiger wrote:
> > Lewis Thompson wrote:
> > >I'm trying to create a port for a Python application that I want to
> > >start from local/etc/rc.d. The command is this:
> > >
> > >/usr/bin/su freevo -c "/usr/l
Hi,
Try this configuration
/ 128MB
swap 32MB
/var 32MB
/tmp 32MB
/usr the rest of the disk...
I think tou will be albe to run the X too
Hi
I'm trying to install FreeBSD 4.10 on an older computer with a 852 MB
hard disk.
According to the handbook, 250 MB shou
Lewis Thompson wrote:
[ ... ]
Does the script set $PATH to include the location where python is? If you
don't list /usr/local/bin explicitly, this may be the problem...
No, PATH doesn't get set but if I run it as /usr/local/bin/freevo.sh start
from a login shell (i.e. after the system has booted)
--On Sunday, June 20, 2004 12:10 AM -0700 Dan Langille <[EMAIL PROTECTED]>
wrote:
These are the articles posted during this period:
15-Jun : IBM ThinkPad T41
Installing and configuring FreeBSD and XFree86
http://freebsddiary.org/ibm-thinkpad-t41.php?2
'Tain't there, McGee...
Jim Trigg
-
>
> Hi
>
> I'm trying to install FreeBSD 4.10 on an older computer with a 852 MB hard
> disk.
> According to the handbook, 250 MB should suffice for text mode only.
> However, both the "User" and (retried) "Minimal" distributions left me
> with no space in /usr
> I used the default partitioning
Hi
I'm trying to install FreeBSD 4.10 on an older computer with a 852 MB hard disk.
According to the handbook, 250 MB should suffice for text mode only.
However, both the "User" and (retried) "Minimal" distributions left me with no space
in /usr
I used the default partitioning (entire disk) and
On Wed, Jun 20, 2001 at 11:44:22AM +0300, Alex wrote:
> [...]
You're living in the past, man!
Kris
pgpxCFCYafmXX.pgp
Description: PGP signature
On Sun, Jun 20, 2004 at 03:01:54PM -0400, Chuck Swiger wrote:
> Lewis Thompson wrote:
> >I'm trying to create a port for a Python application that I want to
> >start from local/etc/rc.d. The command is this:
> >
> >/usr/bin/su freevo -c "/usr/local/bin/freevo -fs start" > /dev/null 2>&1
> >
> > U
On Sunday 20 June 2004 02:48 pm, Graham Bentley wrote:
> freebsd# /usr/local/bin/mysqladmin -u root -h freebsd.mydomain.com password
> mypassword
>
> /usr/local/bin/mysqladmin: connect to server at 'freebsd.mydomain.com'
> failed error: 'Host 'freebsd.mydomain.com' is not allowed to connect to
> th
Lewis Thompson wrote:
I'm trying to create a port for a Python application that I want to
start from local/etc/rc.d. The command is this:
/usr/bin/su freevo -c "/usr/local/bin/freevo -fs start" > /dev/null 2>&1
Unfortunately when I boot up I get a message about Python not being
configured/availa
Hi All
Can any MySQL gurus out there point me in the direction of enlightenment.
Just installed MySQL for a Wiki DB and get the following when trying to add
the root password as instructed by the installer.
freebsd# /usr/local/bin/mysqld_safe &
[1] 684
freebsd# Starting mysqld daemon with data
:Hello!
:
:I'm writing a message-digest utility, which operates on file and
:can use either stdio:
:
: while (not eof) {
: char buffer[BUFSIZE];
: size = read( buffer ...);
: process(buffer, size);
: }
:
:or mmap:
:
: buffer = mmap(...
I was currently getting help from a person for getting my wireless pc card
working on my laptop when we both came to the conclusion that my kernel
source had either not been installed, or was hiding very well. I wasn't able
to get a hold of the original install cd so I used a 5.0 release from a
Hi,
I'm trying to create a port for a Python application that I want to
start from local/etc/rc.d. The command is this:
/usr/bin/su freevo -c "/usr/local/bin/freevo -fs start" > /dev/null 2>&1
Unfortunately when I boot up I get a message about Python not being
configured/available at this tim
my desktop machine using (I think) 4.9-Release. It started when I had
to change the motherboard. The new one came w/ an SiS chipset that
wasn't supported by FreeBSD. I solved the problem by adding a line to
/sys/dev/ata/ata-dma.c. It worked for a few weeks w/o any problems
until I switched to
On Sunday 20 June 2004 11:41 am, Dan Nelson wrote:
= In the last episode (Jun 20), Mikhail Teterin said:
= > I expected the second way to be faster, as it is supposed to avoid
= > one memory copying (no user-space buffer). But in reality, on a
= > CPU-bound (rather than IO-bound) machine, using mma
Hi,
Phil Schulz a écrit :
I didn't see the beginning of the thread.
http://lists.freebsd.org/mailman/htdig/freebsd-questions/2004-June/049482.html
But I had a similar problem on
my desktop machine using (I think) 4.9-Release. It started when I had to
change the motherboard. The new one came w/ an
..or see: http://www.freebsd.org/cgi/ports.cgi?query=torrent&stype=all
There are a few different options for torrent clients.
On June 18, 2004 22:38, Julian M. Mason wrote:
> ...is bittorrent really not in ports?
>
> my usual
> # cd /usr/ports ; make search name="bittorrent"
> and
> # whereis bi
Hi,
Robert Downes a écrit :
Bernard Dugas wrote:
Thanks very much, Robert, it was the udma option : but this is quite
inefficient if I can't use UDMA with FreeBSD ?
FreeBSD will drop down to PIO mode, probably mode 4.
According to Scott Mueller's book, PIO mode 4 offers up to 16.67 MB/sec,
wherea
On Sun, 20 Jun 2004, David Fleck wrote:
Sorry for this monumentally stupid-sounding question, but how do you tell
if the dnsbl feature is *working* or not? I've got 2 set in my local .mc
files:
FEATURE(dnsbl, `bl.spamcop.net', `"550 Mail from " $&{client_addr} " rejected, see
http://spamcop.net/b
In the last episode (Jun 20), Mikhail Teterin said:
> I expected the second way to be faster, as it is supposed to avoid
> one memory copying (no user-space buffer). But in reality, on a
> CPU-bound (rather than IO-bound) machine, using mmap() is
> considerably slower. Here are the tcsh's time resu
Im trying to set it up, and Im not getting any "real" output from camcontrol
devlist. Im following instructions from
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM.
dmesg only shows the devices as atapi devices, and not scsi.
Does anyone have an idea where Im
On Sunday 20 June 2004 06:36, Gerard Seibert wrote:
> I am using PGP version 8.03 < http://www.pgp.com/ >on my WinXP machines. My
> data is uploaded to a keyserver. PGP Corporation does not, as far as I can
> determine, market a FreeBSD or Linux version of this software.
>
> My question would be wh
Hi all,
I've recently converted our company server from 5.2 release
to 4.10 stable. I'm in the process of ironing out last
little issues i'm having. This problem has to do with my
mail setup. I'm running postfix MTA and courier-imap
server.
My maillog file is filled with messages like the followi
On Sun, Jun 20, 2004 at 08:24:16AM -0500, David Fleck wrote:
> On Fri, 14 May 2004, Warren Block wrote:
> > On Fri, 14 May 2004, Gary Kline wrote:
> > > Can anyone point me to the website that told how to set up
> > > sendmail's FEATURE to use blacklists? There were at least
> > > fourr blac
On Fri, 14 May 2004, Warren Block wrote:
> On Fri, 14 May 2004, Gary Kline wrote:
> > Can anyone point me to the website that told how to set up
> > sendmail's FEATURE to use blacklists? There were at least
> > fourr blacklist sites. I've grep'd thru my ~/Mail directory,
> > can't
On Sat, 2004-06-19 at 09:13, stan wrote:
> I had a vendor give me a USB memory stick as a promotional giveaway
> yesterday. Kind of amazing theat they have gotten cheap enough for this.
>
> In any case, I pluged it into my laptop with STABLE on it (cvsuped last
> weekend). It recognized the device
Ahoi,
> What about win modems?? where I can find drivers or
> kernel modules. Linux drivers doesn't work correctly.
> My modem-Lucent Win Modem (Genius GM56PCI-L), chipset-Lucent1646
try this:
Port: ltmdm-1.4_5
Path: /usr/ports/comms/ltmdm
Info: Driver for the Lucent LT Winmodem chipset
C
HI FreeBSD team! What about win modems?? where I can find drivers or
kernel modules. Linux drivers doesn't work correctly.
My modem-Lucent Win Modem (Genius GM56PCI-L), chipset-Lucent1646
Thanks!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.or
[snipped]
> > Since I really can't from looking at my bookshelf, can anyone recommend
> > a book with a few good chapters on general unix concepts to get a
> > completely green user familiar and comfortable with "the way things are
> > done"? Comming from $OTHER_OS to unix can be daunting but onc
On stardate Sun, 20 Jun 2004, the wise Kent Stewart entered:
On Sunday 20 June 2004 03:54 am, Marco Beishuizen wrote:
I'm trying to install gFTP from the ports. When I do a make install,
it constantly wants to install gtk20 instead of gtk12. Gtk20 isn't
installed on my machine due to errors during
On Sun, Jun 20, 2004 at 07:36:17AM -0400, Gerard Seibert wrote:
> I am using PGP version 8.03 < http://www.pgp.com/ >on my WinXP machines. My
> data is uploaded to a keyserver. PGP Corporation does not, as far as I can
> determine, market a FreeBSD or Linux version of this software.
No -- but they
On Sun, Jun 20, 2004 at 12:45:57PM +1000, Jason Oakley wrote:
> I set up automount, but that's not working.
>
> usb1: on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
>
>
> I also get this after a rebo
I am using PGP version 8.03 < http://www.pgp.com/ >on my WinXP machines. My
data is uploaded to a keyserver. PGP Corporation does not, as far as I can
determine, market a FreeBSD or Linux version of this software.
My question would be what version of PGP available for FreeBSD would be most
compati
On Sun, 2004-06-20 at 05:23, [EMAIL PROTECTED] wrote:
> On Sat, Jun 19, 2004 at 11:26:13PM -0400, Bruce wrote:
> > Hello all,
> >
> > Currently, I am running Gnome 2.6 and I am just wondering what cd
> > burning software is really good from the ports collection?
> >
> > I want to burn cd's from
On stardate Sun, 20 Jun 2004, the wise Geert Hendrickx entered:
The Makefile in ports/ftp/gftp has the option WITH_GTK2, which should of
course be unset if you want to compile with gtk12 (that seems to be the
default). Maybe you have some saved options in /var/db/ports/gftp/ ?
Then remove that fil
On Sat, 2004-06-19 at 20:33, Tom McLaughlin wrote:
> On Sat, 2004-06-19 at 14:23, Lloyd Hayes wrote:
> > I finally decided that I needed to get more information on FreeBSD. I
> > got it up and running, then I did something else and I start getting
> > errors again
> >
> > So I just ordered 3
On stardate Sun, 20 Jun 2004, the wise Jan Muenther entered:
I'm trying to install gFTP from the ports. When I do a make install, it
constantly wants to install gtk20 instead of gtk12. Gtk20 isn't installed
on my machine due to errors during the build, but gtk12 is installed.
According to the gFTP
I'm trying to install gFTP from the ports. When I do a make install, it
constantly wants to install gtk20 instead of gtk12. Gtk20 isn't installed
on my machine due to errors during the build, but gtk12 is installed.
According to the gFTP website it shouldn't be a problem to install gFTP
with gt
> I'm trying to install gFTP from the ports. When I do a make install, it
> constantly wants to install gtk20 instead of gtk12. Gtk20 isn't installed
> on my machine due to errors during the build, but gtk12 is installed.
>
> According to the gFTP website it shouldn't be a problem to install gFT
On Sunday 20 June 2004 03:54 am, Marco Beishuizen wrote:
> I'm trying to install gFTP from the ports. When I do a make install,
> it constantly wants to install gtk20 instead of gtk12. Gtk20 isn't
> installed on my machine due to errors during the build, but gtk12 is
> installed.
>
> According to t
The Makefile in ports/ftp/gftp has the option WITH_GTK2, which should of
course be unset if you want to compile with gtk12 (that seems to be the
default). Maybe you have some saved options in /var/db/ports/gftp/ ?
Then remove that file and try again.
GH
On Sun, Jun 20, 2004 at 12:54:13PM +0200
Bruce wrote:
> Hello all,
>
> Currently, I am running Gnome 2.6 and I am just wondering what cd
> burning software is really good from the ports collection?
>
> I want to burn cd's from iso files or copy music cd's to cd's.
>
> Or make data cd's.
If you want something with gui, have a look at
On Sun, Jun 20, 2004 at 01:25:07AM -0700, Kris Kennaway wrote:
> On Sat, Jun 19, 2004 at 05:43:17PM -0700, Lukasz Koszanski wrote:
> > make install
> > ===> Installing for jdk-1.4.2p6_4
> > ===> jdk-1.4.2p6_4 depends on executable: javavm -
> > found
> > ===> jdk-1.4.2p6_4 depends on file:
>
Hello,
I want use linux-realplay with esound, but when i try it i have some error.
I search about it in google, and find that i must have libesd.so.0, but
i have only libesd.so.2. I create symlink to libesd.so.0 from libesd.so.2.
And now when i try use realplay i have coredump realplay.
My system
I have been attempting to get my pcmcia wireless card running on my laptop, I
have identified the driver to install (wi), but am quite clueless on how to
do so.
What exactly are you doing and what problems are you facing?
When you insert the card, you should see some messages on the console.
On Sat, Jun 19, 2004 at 04:29:05PM -0700, Joe Schmoe wrote:
> Second, where can I find documentation on ufs2 and snapshotting, etc. ? There is no
> 'ufs2' manpage, and the mksnap_ffs man page is about 20 lines long ... where can I
> find more documentation ?
Try:
http://www.mckusick.com/F
On Sat, Jun 19, 2004 at 05:43:17PM -0700, Lukasz Koszanski wrote:
> make install
> ===> Installing for jdk-1.4.2p6_4
> ===> jdk-1.4.2p6_4 depends on executable: javavm -
> found
> ===> jdk-1.4.2p6_4 depends on file:
> /usr/X11R6/lib/X11/fonts/URW/fonts.dir - found
> This is basically what hap
Bill Moran wrote:
Graham Bentley <[EMAIL PROTECTED]> wrote:
[...]
I also wondered if there is a project based on FreeBSD that
achieves similar goals to SME Server (ie all in one LAN server
with Web config) or similar to Trustix (ie minimal config with
series of scripts to configure server services.
On Sunday 20 June 2004 01:29, Joe Schmoe wrote:
> Quick question - when I run `mount` or view /etc/fstab in fbsd 5.x, I just
> see "ufs" as the filesystem type. How can I get some kind of output that
> assures me that those volumes are indeed UFS2 volumes ? How do I verify
> that ?
# dumpfs /de
Hello!
I'm writing a message-digest utility, which operates on file and
can use either stdio:
while (not eof) {
char buffer[BUFSIZE];
size = read( buffer ...);
process(buffer, size);
}
or mmap:
buffer = mmap(... file_si
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to [EMAIL PROTECTED] with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the mailing list
arc
82 matches
Mail list logo
