I've got four identical HP/Compaq DL360 G3 1u servers. Each has the
latest available firmware:
Proliant P31 (03/03/2005) BIOS
HP SmartArray 5i RAID onboard controller (v2.62)
(2) HPNC7781 (Broadcom BCM5703) (ASIC rev. 0x1002) 10/100/1000 onboard
network card
iLO v1.80 (Jul/12/2005)
and each
[EMAIL PROTECTED] wrote:
>> My conclusion, if you need something stable, don't use the onboard
>> raid, get a RAID card even the cheap ones will do better job!!
>
> Hi,
>
> Thanks for the confirmation the onboard controller is not the
> way to go... What reliable and good raid controller would y
On Tuesday 20 June 2006 20:48, Derrick Ryalls wrote:
> Greetings,
>
> i was wondering if anyone had a good tool recommendation for
> creating DVD movies with FreeBSD. Since I have a child growing up,
> it is appealing to me to make a copy of their favorite DVD and burn
> it so they can handle the
On Tuesday 20 June 2006 19:48, Derrick Ryalls wrote:
> Greetings,
>
> i was wondering if anyone had a good tool recommendation for creating
> DVD movies with FreeBSD. Since I have a child growing up, it is
> appealing to me to make a copy of their favorite DVD and burn it so
> they can handle the
[EMAIL PROTECTED] wrote:
>> 1) With the Promise controller, after simulating a disk problem
>> (shutdown - disk disconnection - reboot - shutdown - disk
>> reconnection - reboot), I wasn't able to rebuild the array at all,
>> either with "atacontrol rebuild ar0" or from the bios. I suspect a
>> sp
Michael P. Soulier schrieb:
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I still
see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
If you install FreeBSD 6.1 then you
At Tue, 20 Jun 2006 it looks like Ted Mittelstaedt composed:
>
> It's easy to build that program by hand on FreeBSD.
>
> TEd
Thanks Ted.
--
Bill Schoolcraft || http://wiliweld.com
<>
"To be unhappy over what one lacks is to
waste what one already possesses.
--On June 20, 2006 10:51:46 PM -0500 Denny White <[EMAIL PROTECTED]>
wrote:
Okay, might be off base here, so someone correct me if
I'm wrong. Don't you also have to remove the following
# ifdef SMP
# ifndef COMPILING_LINT
# error DEVICE_POLLING is not compatible with SMP
# endif
# endif
from /
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
--On June 20, 2006 10:23:52 PM -0300 Sergio Lenzi <[EMAIL PROTECTED]> wrote:
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and
on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I
still
see only
On 6/20/06, Danial Thom <[EMAIL PROTECTED]> wrote:
User manuals and how-tos don't generally get
copyright notices, because there is nothing
creative about it. Someone could write exactly
the same thing (just about), and you'd have
little claim to it because its just a procedural
description. Wh
Scott Long wrote:
Eric Anderson wrote:
Ensel Sharon wrote:
On Mon, 19 Jun 2006, Jahilliya wrote:
Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, s
Hello,
Has anyone out there successfully done an online expansion of a RAID
array in FreeBSD? How is it done and with what hardware did it work?
From what I can gather, it's not possible. Aside from the fact that
fdisk(8) says "Editing an existing slice will most likely result in the
loss of
Hi, I edited the libmap.conf but now it coredumps when I ran azureus
i am running jdk1.5.0-p3 on freebsd 6.1/amd64
I attach the error log (don't know if mailing list accept attachment)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.o
On 6/20/06, Mark Kane <[EMAIL PROTECTED]> wrote:
On Tue, Jun 20, 2006, at 17:48:39 -0700, Derrick Ryalls wrote:
> Greetings,
>
> i was wondering if anyone had a good tool recommendation for creating
> DVD movies with FreeBSD. Since I have a child growing up, it is
> appealing to me to make a cop
--On June 20, 2006 10:23:52 PM -0300 Sergio Lenzi <[EMAIL PROTECTED]> wrote:
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and
on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I
still
see only one CPU. Also, sysctl -a | grep cpu only shows a
On 6/20/06, Travis H. <[EMAIL PROTECTED]> wrote:
It was there last time... what happened?
My mistake. In fooling around with it I had set the state to
something invalid, and I thought that loader.conf went in /etc, not
/boot. I used "rm" on everything, saved, created via a config file,
and no
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and
on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I
still
see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
You must set :
machdep.hyperthreading_allowed=1
in /boot/loader
On Tue, Jun 20, 2006, at 17:48:39 -0700, Derrick Ryalls wrote:
> Greetings,
>
> i was wondering if anyone had a good tool recommendation for creating
> DVD movies with FreeBSD. Since I have a child growing up, it is
> appealing to me to make a copy of their favorite DVD and burn it so
> they can
On 20/06/06 Andy Reitz said:
> I believe that ia64 refers to the Itanium port of FreeBSD, and I'm not
> sure of the i386 version will install on Itanium. Are you referring to the
> AMD64/EMT-64 port of FreeBSD?
It's a 64-bit P4. My i386 5.4 install works fine.
Mike
--
Michael P. Soulier <[EMA
Prepare the disks:
Done:
# disklabel /dev/ad4s1
# /dev/ad4s1:
8 partitions:
#size offsetfstype [fsize bsize bps/cpg]
a: 398283401 16unused0 0
c: 3982834170unused0 0 # "raw" part,
don't edit
# disklabel /dev/ad4s1
# /dev/ad
On Mon, 19 Jun 2006 22:35:15 -0700
Michael Collette <[EMAIL PROTECTED]> wrote:
> Bit of a dilemma here with my primary desktop machine suddenly up and
> dieing on me. I'm now in the market to slap together a new PC
>
> I've started with looking at picking up an AMD64 based system. After
> Goo
--- Jim Stapleton <[EMAIL PROTECTED]> wrote:
> Mr. Hoffman, I'm surprised this hasn't been
> said, and I'm probably
> overstepping my bounds by saying this, but I've
> been following this
> topic, and I have trouble seeing it as anything
> but trolling. The
> freeBSD groups have always been exce
Greetings,
i was wondering if anyone had a good tool recommendation for creating
DVD movies with FreeBSD. Since I have a child growing up, it is
appealing to me to make a copy of their favorite DVD and burn it so
they can handle the copy, not the original (legal to make backup
copies). I also w
Andy Reitz wrote:
In 64-bit mode, that does appear to be the case. However, it sounds like
you could purchase an AMD64-based processor, and have everythign work fine
in 32-bit mode. Then later down the road, as the software evolves, you
could upgrade FreeBSD to be 64-bit and be set.
Just a thoug
It's easy to build that program by hand on FreeBSD.
TEd
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Bill
>Schoolcraft
>Sent: Monday, June 19, 2006 11:18 AM
>To: freebsd-questions@freebsd.org
>Subject: "linksysmon" Linksys Router logging util?
>
>
>He
On Tuesday 20 June 2006 19:01, Andy Reitz wrote:
> On Tue, 20 Jun 2006, Michael P. Soulier wrote:
> > Hello,
> >
> > Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and on
> > Linux it shows up with two cpus. When I do a top on the box in FreeBSD I
> > still see only one CPU. Als
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Elliot Finley
>Sent: Monday, June 19, 2006 9:12 AM
>To: Alex Zbyslaw
>Cc: freebsd-questions@freebsd.org
>Subject: Re: monitoring raid arrays
>
>
>
>- Original Message -
>From: "Alex Zbyslaw" <[EMAIL
On Tue, 20 Jun 2006, Michael Collette wrote:
> Any and all feedback is appreciated. For as nice as the AMD64 processor
> may be, sounds like things are a ways off before the software has fully
> caught up.
In 64-bit mode, that does appear to be the case. However, it sounds like
you could purchas
--- Brett <[EMAIL PROTECTED]> wrote:
> On 6/19/06, Christopher Weldon
> <[EMAIL PROTECTED]> wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > Brett wrote:
> > > Obviously, you have never spent days trying
> out a relatively
> > > undocumented procedure, finally getting it
> ri
Mr. Hoffman, I'm surprised this hasn't been said, and I'm probably
overstepping my bounds by saying this, but I've been following this
topic, and I have trouble seeing it as anything but trolling. The
freeBSD groups have always been excessively helpful and friendly, and
you've done alot to insult
Mark Kane wrote:
> Hi. I'm using an Athlon64 3000+ (and the amd64 version of FreeBSD) as my
main workstation. I also have another workstation with the same CPU
running the i386 version. Here's my opinions:
Flash - The 32 bit Linux binary of Flash 7 works in linux-firefox or
linux-opera fine in
Not the promise.
Ted
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Philippe Lang
>Sent: Monday, June 19, 2006 1:18 AM
>To: freebsd-questions
>Subject: ICH5R, ICH7R or Promise PDC20378 RAID?
>
>
>Hi,
>
>I've got two boxes that would be perfect for a sma
--- "Michael P. Soulier"
<[EMAIL PROTECTED]> wrote:
> Hello,
>
> I recently got an ia64 box at work, and I threw
> my i386 freebsd 5.4 on it.
> Now, is there a way to rebuild world with
> 64-bit support from there?
>
> Thanks,
> Mike
Everything I've tested runs slower in 64-bit mode
(mainly b
On Tue, 20 Jun 2006, Michael P. Soulier wrote:
> Hello,
>
> Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and on
> Linux it shows up with two cpus. When I do a top on the box in FreeBSD I still
> see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
Hi Mike,
I
On Tue, 20 Jun 2006, Michael P. Soulier wrote:
> Hello,
>
> I recently got an ia64 box at work, and I threw my i386 freebsd 5.4 on it.
> Now, is there a way to rebuild world with 64-bit support from there?
Hi Mike,
I believe that ia64 refers to the Itanium port of FreeBSD, and I'm not
sure of th
On Monday 19 June 2006 14:36, Sergey Matveychuk wrote:
> [EMAIL PROTECTED] wrote:
> > Hi,
> >
> > I'm in the middle of configuring a repeatable jail installation with some
> > ports - in a nutshell, I want to install from locally built packages, but
> > if not available locally I want to build the
Lowell Gilbert wrote:
"Mayo, Richard A RDECOM CERDEC STCD SRI" <[EMAIL PROTECTED]>
writes:
I installed FreeBSD on a couple of computers without installing any source
code. Now (naturally), I want to get a hold of the kernel source so I can
re-compile and enable support for PIM and Multicast
David,
I am a published author many times over with more commercial
copyrights on material than I believe you will ever have, and I
know much of copyright law, as any author does.
I am requesting that you kindly blow this out your ass.
In any infringement case it is the responsibility of
I would like to install CVS server on my FreeBSD 6.1 x386 machine.
Which ports should I install?
I installed "cvsd" and "cvsdadm". Is that all I need to install and
configure?
I read at (http://ch.tudelft.nl/~arthur/cvsd/) that cvsd is a wrapper
program for cvs in pserver mode. So does that
mea
Hello,
Is SMP enabled in the GENERIC kernel? I have a hyperthreading box, and on
Linux it shows up with two cpus. When I do a top on the box in FreeBSD I still
see only one CPU. Also, sysctl -a | grep cpu only shows a dev.cpu.0.
Mike
--
Michael P. Soulier <[EMAIL PROTECTED]>
"Any intelligent f
Hello,
I recently got an ia64 box at work, and I threw my i386 freebsd 5.4 on it.
Now, is there a way to rebuild world with 64-bit support from there?
Thanks,
Mike
--
Michael P. Soulier <[EMAIL PROTECTED]>
"Any intelligent fool can make things bigger and more complex... It
takes a touch of geni
Hey people,
I had a power failure today (there goes my uptime) that lasted longer than my
UPS, and when the box came back up, my PPPoE connection did not.
# Enable PPPoE
ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"
ppp_profile="storm"
Is this not correct? Should this not cause ppp to be start
On Tuesday 20 June 2006 15:15, B. Cook wrote:
> I also have another box with dansguardian and squid.. and dansguardian
> depends on squid but because d comes before s, dansguardian starts
> first, fails then squid starts.. and I've tried to use rcorder to fix
> that problem and can't seem to make
Hi,
I am currently unable to rebuild Sendmail with LDAP support.
Unfortunately I am not sure what broke it; it could be my
upgrade from OpenLDAP 2.2.30 to 2.3.24 or my upgrade from OpenSSL 0.9.8a
to 0.9.8b. Foolishly, I did both at the same time without testing after
each one. I do know it is no
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was having the problem before upgrading from 5.4 to 5.5,
and now, after the upgrade, the problem persists. Now and
then, I can find a cd that'll mount, but most won't. Have
tried the ones that won't mount on this obsd box with atapi
instead of sc
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was having the problem before upgrading from 5.4 to 5.5,
and now, after the upgrade, the problem persists. Now and
then, I can find a cd that'll mount, but most won't. Have
tried the ones that won't mount on this obsd box with atapi
instead of scsi
Mark <[EMAIL PROTECTED]> writes:
> When doing a "make buildkernel" and "make installkernel" on FreeBSD
> 4.11-RELEASE (on a Vmware box), I noticed the Makefile in /usr/src/etc,
> for one, tries to reset permissions on files taken from a series of *.dist
> files. I find such initiative a bit too fo
On 6/20/06, Nikolas Britton <[EMAIL PROTECTED]> wrote:
Can make fetchindex fetch old (say 06/12/2006 00:00:00UTC) index
files? or will I need to run make index?
Never mind, it was faster to make index then wait for a reply.
--
BSD Podcasts @:
http://bsdtalk.blogspot.com/
http://freebsdfora
On Tuesday 20 June 2006 15:15, B. Cook wrote:
> Hello all,
>
> I'm looking at what I think is the right answer.. but can't make sense
> of it..
>
> basically I have a couple of mailservers that run exim and dnscache, all
> being called out of daemontools.
>
> but I can't seem to figure out how to m
I got Squid installed with squidGaurd. It appears to be working as I have
denied port 80 from the internal interface using IPFW and if the proxy is
not used internet no worky.. ;-)
I'm having troubles now figuring out how to get a good list of site to block
and where to put them. I have read somet
Hello,
I recompiled my kernel today (to 6.1 p2) and today postfix exited with
this error message in the log:
Jun 20 08:56:54 designaproduct postfix/postfix-script: fatal: Postfix
integrity check failed!
Otherwise it is working fine (there are no problems with postfix, except
that it exi
> 1) With the Promise controller, after simulating a disk
> problem (shutdown - disk disconnection - reboot - shutdown -
> disk reconnection - reboot), I wasn't able to rebuild the
> array at all, either with "atacontrol rebuild ar0" or from
> the bios. I suspect a spare disk is necessary for
Can make fetchindex fetch old (say 06/12/2006 00:00:00UTC) index
files? or will I need to run make index?
--
BSD Podcasts @:
http://bsdtalk.blogspot.com/
http://freebsdforall.blogspot.com/
___
freebsd-questions@freebsd.org mailing list
http://lists.fre
[EMAIL PROTECTED] wrote:
> On Mon, Jun 19, 2006 at 10:18:05AM +0200, Philippe Lang wrote:
>> Hi,
>>
>> I've got two boxes that would be perfect for a small server. The
>> motherboards are:
>>
>> - ASUS P4C800-E Deluxe, with ICH5R and Promise PDC20378
>> - ASUS P5WD2, with ICH7R
>>
>> I intend
This happened on a FreeBSD 6.0 machine.
Installed a SCSI drive on the machine -- drive had been used
for testing previously and had an ext2 FS on it. I was able
to use the sysinstall fdisk utility to remove the ext2fs
partition and create a FreeBSD slice that utilized the entire
disk.
Then I loa
On Tue, 20 Jun 2006 17:00:48 +0200, Lowell Gilbert
<[EMAIL PROTECTED]> wrote:
"Tsu-Fan Cheng" <[EMAIL PROTECTED]> writes:
happy fathers day! I have Azureus running both on windows and on
freebsd/amd64. and I found it was very different, on windows azureus is
very
quick in downloading fil
"Tsu-Fan Cheng" <[EMAIL PROTECTED]> writes:
> happy fathers day! I have Azureus running both on windows and on
> freebsd/amd64. and I found it was very different, on windows azureus is very
> quick in downloading files, but not on freebsd, it is very slow and usually
> no download. I forward the
The problem ended up being I had the incorrect netmask.
They are using here 255.255.0.0 instead of 255.255.255.0
Lowell Gilbert wrote:
Forrest Aldrich <[EMAIL PROTECTED]> writes:
I have a freshly-built (cvsup'd today) FreeBSD_6.1 system which fails
to set the default router upon boot.
I
Forrest Aldrich <[EMAIL PROTECTED]> writes:
> I have a freshly-built (cvsup'd today) FreeBSD_6.1 system which fails
> to set the default router upon boot.
>
> I have tried two routers, both on the same /24 segment... "network
> unreachable". These were set using the "defaultrouter=xxx.xx.xxx.xx"
Michael Pope <[EMAIL PROTECTED]> writes:
> I'm having a problem with aclocal and Automake when I'm running
> configgen.sh for inkscape on FreeBSD 5.4.
>
> Here is the error:
>
> ===> Running aclocal...
> aclocal: couldn't open directory
> /usr/local/gnu-autotools/share/aclocal': No such file or di
On Tue, 20 Jun 2006 17:11:33 +0400
Boris Samorodov <[EMAIL PROTECTED]> wrote:
> On Tue, 20 Jun 2006 14:54:09 +0200 Alexander Leidinger wrote:
> > Quoting Boris Samorodov <[EMAIL PROTECTED]> (from Tue, 20 Jun 2006 15:07:48
> > +0400):
> > > On Tue, 20 Jun 2006 13:33:48 +0300 Ion-Mihai Tetcu wrote:
On Tue, 20 Jun 2006 14:54:09 +0200 Alexander Leidinger wrote:
> Quoting Boris Samorodov <[EMAIL PROTECTED]> (from Tue, 20 Jun 2006 15:07:48
> +0400):
> > On Tue, 20 Jun 2006 13:33:48 +0300 Ion-Mihai Tetcu wrote:
> >
> >> On Tue, 20 Jun 2006 13:33:06 +0300
> >> Ion-Mihai "IOnut" Tetcu <[EMAIL PROTE
Quoting Boris Samorodov <[EMAIL PROTECTED]> (from Tue, 20 Jun 2006 15:07:48
+0400):
On Tue, 20 Jun 2006 13:33:48 +0300 Ion-Mihai Tetcu wrote:
On Tue, 20 Jun 2006 13:33:06 +0300
Ion-Mihai "IOnut" Tetcu <[EMAIL PROTECTED]> wrote:
> On Tue, 20 Jun 2006 14:09:31 +0400
> Boris Samorodov <[EMAIL
I'm having trouble upgrading my 5.4-STABLE box. /usr/ports/UPDATING
says:
-
20060616:
AFFECTS users of emulation/linux_base-*
AUTHOR: [EMAIL PROTECTED]
We now use Fedora Core 4 as the linux base port, and the
corresponding
xorg libs for the linux X11
Hello all,
I'm looking at what I think is the right answer.. but can't make sense
of it..
basically I have a couple of mailservers that run exim and dnscache, all
being called out of daemontools.
but I can't seem to figure out how to make svscan start first..
# PROVIDE: svscan
# REQUIRE: L
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jim Pazarena
> Sent: Tuesday, June 20, 2006 8:33 AM
> To: freebsd-questions@freebsd.org
> Subject: openwebmail
>
>
>
> does anyone have any recent how-to pages on setting
> up openwebmail on FreeBSD
Jim Pazarena wrote:
does anyone have any recent how-to pages on setting
up openwebmail on FreeBSD?
a google shows lots of Linux stuff, most referring back to
Openwebmail website, but FreeBSD setup is virtually non-existent.
___
freebsd-questions@freebs
El día Tuesday, June 20, 2006 a las 03:17:08PM +0200, Jean-Baptiste Quenot
escribió:
> > I have exactly this port version because I fetched it as tar from
> > the FreeBSD server:
> >
> > $ fgrep Makefile,v Makefile
> > # $FreeBSD: ports/net/ekiga/Makefile,v 1.60 2006/04/23 10:34:03 erwin Exp $
>
El día Tuesday, June 20, 2006 a las 02:59:04PM +0200, Jean-Baptiste Quenot
escribió:
> * [EMAIL PROTECTED]:
> >
> > I've successful ported Ekiga to my FreeBSD notebook from the
> > sources (version ekiga-2.0.2); maybe it is interesting for the
> > port-maintainer as well, because the port is mar
* [EMAIL PROTECTED]:
> El día Tuesday, June 20, 2006 a las 02:59:04PM +0200, Jean-Baptiste Quenot
> escribió:
>
> > * [EMAIL PROTECTED]:
> > >
> > > rebelion# make
> > > ===> ekiga-2.0.1_2 is marked as broken: Unknown component gnomedocutils.
> >
> > No, ekiga is not currently broken. The las
ive noticed that sendmail in the ports collection will download and build a
8.13.7, but after a cvsup-buildworld, sendmail is still (albiet now patched)
at 8.13.6. any ideas as to when the 8.13.7 will be included into the
STABLE/RELENG trees?
just curious,
jonathan
Hi Guys,
sorry for top-posting, but I don't really know where to add this:
I still have problems with acroread7, even after the update to
linux_base-fc-4_2 and linux-xorg-libs-6.8.2_4:
/usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/bin/acroread: error
while loading shared libraries: /usr/lib/
* [EMAIL PROTECTED]:
>
> I've successful ported Ekiga to my FreeBSD notebook from the
> sources (version ekiga-2.0.2); maybe it is interesting for the
> port-maintainer as well, because the port is marked as broken:
>
> rebelion# make
> ===> ekiga-2.0.1_2 is marked as broken: Unknown component g
On Tue, 20 Jun 2006 13:33:48 +0300 Ion-Mihai Tetcu wrote:
> On Tue, 20 Jun 2006 13:33:06 +0300
> Ion-Mihai "IOnut" Tetcu <[EMAIL PROTECTED]> wrote:
> > On Tue, 20 Jun 2006 14:09:31 +0400
> > Boris Samorodov <[EMAIL PROTECTED]> wrote:
> >
> > > On Tue, 20 Jun 2006 12:23:19 +0300 Ion-Mihai "IOnut"
On Tue, 20 Jun 2006 13:33:06 +0300
Ion-Mihai "IOnut" Tetcu <[EMAIL PROTECTED]> wrote:
> On Tue, 20 Jun 2006 14:09:31 +0400
> Boris Samorodov <[EMAIL PROTECTED]> wrote:
>
> > On Tue, 20 Jun 2006 12:23:19 +0300 Ion-Mihai "IOnut" Tetcu wrote:
> >
> > > /me whispers 'cvs diff -uN' and misc/tinderbox
On Tue, 20 Jun 2006 13:33:06 +0300 Ion-Mihai "IOnut" Tetcu wrote:
> On Tue, 20 Jun 2006 14:09:31 +0400
> Boris Samorodov <[EMAIL PROTECTED]> wrote:
> > On Tue, 20 Jun 2006 12:23:19 +0300 Ion-Mihai "IOnut" Tetcu wrote:
> >
> > > /me whispers 'cvs diff -uN' and misc/tinderbox :)
> >
> > > Or send
Hello.
> Ensel Sharon wrote:
>> I did all my due diligence, I contacted freebsd-fs and _made sure_ that
>> even though the 2820sa is not listed by name in the HCL, that I could take
>> a 6.1-RELEASE cd and install freebsd on a 2820sa.
>>
>> I was _assured_ that these cards are supported in 6.1-RE
Is there any way to monitor hardware on Dell PowerEdge 2850.
Hot-Swap PowerSupply(most critical), CPU Temperature, RAID status and other?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubs
Hello,
I've successful ported Ekiga to my FreeBSD notebook from the
sources (version ekiga-2.0.2); maybe it is interesting for the
port-maintainer as well, because the port is marked as broken:
rebelion# make
===> ekiga-2.0.1_2 is marked as broken: Unknown component gnomedocutils.
rebelion#
t
On Tue, 20 Jun 2006 14:09:31 +0400
Boris Samorodov <[EMAIL PROTECTED]> wrote:
> On Tue, 20 Jun 2006 12:23:19 +0300 Ion-Mihai "IOnut" Tetcu wrote:
>
> > /me whispers 'cvs diff -uN' and misc/tinderbox :)
>
> > Or send it over andI'll run a test on one of my tindyes.
>
> Here it is.
Looks OK:
htt
On Tue, 20 Jun 2006 13:14:43 +0300 Adi Pircalabu wrote:
> On Tue, 20 Jun 2006 14:09:31 +0400 Boris Samorodov wrote:
> > diff -u -r1.4 pkg-plist
> > --- pkg-plist 2 Jun 2006 20:50:32 - 1.4
> > +++ pkg-plist 19 Jun 2006 10:39:14 -
> > @@ -598,6 +598,10 @@
> > usr/lib/libst
On Tue, 20 Jun 2006 14:09:31 +0400 Boris Samorodov wrote:
> diff -u -r1.4 pkg-plist
> --- pkg-plist 2 Jun 2006 20:50:32 - 1.4
> +++ pkg-plist 19 Jun 2006 10:39:14 -
> @@ -598,6 +598,10 @@
> usr/lib/libstdc++.so.5.0.7
> usr/lib/libstdc++.so.6
> usr/lib/libstdc++.so.6.0.7
> +usr/lib
On Tue, 20 Jun 2006 12:23:19 +0300 Ion-Mihai "IOnut" Tetcu wrote:
> /me whispers 'cvs diff -uN' and misc/tinderbox :)
> Or send it over andI'll run a test on one of my tindyes.
Here it is.
WBR
--
Boris B. Samorodov, Research Engineer
InPharmTech Co, http://www.ipt.ru
Telephone & Internet
Hi Guy's and Girls,
Thanks for the advice. I tried umodem, bur the driver could not put the
device into asinc and failed. Exit 6.
As I had little time left I had to reload that other OS.
It appears the device make in the USA is one of those that you can set the
power level softly, not allowed
... and is there anything we can do as a community to prevent it?
I've been a FreeBSD users since '94, and proud of it ... and have
vehemently defended, all the way, my decision to use it vs 'the dark side'
...
Although my above subject is a more "general call", my big beef right now
is wit
On Mon, 19 Jun 2006 20:42:54 +0400
Boris Samorodov <[EMAIL PROTECTED]> wrote:
> On Mon, 19 Jun 2006 19:15:42 +0300 Adi Pircalabu wrote:
> > (Really cc-ed to [EMAIL PROTECTED] and Boris Samodorov a.k.a
> > [EMAIL PROTECTED])
> > On Mon, 19 Jun 2006 18:41:10 +0300 Adi Pircalabu wrote:
> > > On Sun,
On Jun 20, 2006, at 2:04 AM, Olivier Nicole wrote:
Can I have the two? NFS and Samba?
There is no reason you can't.
I run NFS between Unix machines and Samba with MS world.
But there could be strange results if on Xp machines connects to the
same file using both NFS and Samba at same time.
> Can I have the two? NFS and Samba?
There is no reason you can't.
I run NFS between Unix machines and Samba with MS world.
But there could be strange results if on Xp machines connects to the
same file using both NFS and Samba at same time.
Olivier
_
HI all and thanks for your answers
My main goal is to have a system in which the local network can get access
to the file repository, and also thay can get access from their homes to
them (only get a file from server, work on it, and post it to the server).
For this reason I thougth in NFS only a
Some days ago we had a strange reboot of one of our production servers.
After closing the nfs-connection to our FreeBSD machine the
FreeBSD machine produced a core dump and booted. Though we are
not quite sure if the disconnection was the actual cause of the core
dump we know
at least that both th
>>
>> I am mounting a NFS server (FreeBSD 6.1 "amd64") for a MS Windows Network
>> for a customer and I see that I can not see the NFS server from windows
>> boxes.
>>
>> Must I install Samba for that? or anything in the MS Windows boxes?
>> I thougth that Windows understand NFS but seems to be n
Does anybody know how to convert a shared object
compiled in Linux foo-linux.so to a shared object
compiled for FreeBSD freebsd-foo.so? I mean
a freebsd-foo.so to which I can link with objects
compiled by a native FreeBSD compiler. Or
equivalently how to create a FreeBSD foo.so from
a linux fo
On 6/19/06, John Baldwin <[EMAIL PROTECTED]> wrote:
On Sunday 18 June 2006 19:49, David Hoffman wrote:
> * *It appears the page at
> http://www.houfug.org/help/install_freebsd.htmconstitutes a serious
> breach of copyright. The article, which was
> originally written and posted to the Internet
93 matches
Mail list logo