[DX-CHAT] QRT Internet
Discontinuing internet service this date. Unable to keep compter up due to health. Still op a little CW, and QSL direct or bureau. VY 73 and GUD DX all. Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-NEWS] QRT Internet
Discontinuing internet service this date. Unable to keep compter up due to health. Still op a little CW, and QSL direct or bureau. VY 73 and GUD DX all. Larry, K4WLS -- Archives http://www.mail-archive.com/[EMAIL PROTECTED] THE DXR is sponsored by the North Jersey DX Association. Please visit our website: http://www.njdxa.org/index.php scroll to bottom for subscribe/unsubscribe options --
Re: [DX-CHAT] BS7H
Operating Procedures - Exactly correct Jerry !! I didn't think there was anyone around besides me that could remember that one !! At least one !! OK - Enuf Said Here, 73, Larry From: J. Allen Call [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [DX-CHAT] BS7H Whatever happened to good old operating procedures. You cannot work the guy if you are talking at the same time. You need to listen and learn what his operating procedures are. I have worked many DX stations with 100 watts and a dipole. I have heard many a station contact the DX station and give them a 59 and then turn around and ask them to repeat his call sign, or what was my signal report, etc. I have spent many hours in trying to work the elusive DX and patience and perseverance have paid off. I have worked them all. Don't have a 5 el or the best XCVR made or used DX cluster spots. It's all about timing. J W7KSG A good lesson for all you guys that depend on the following to get you a new one: DX Cluster Spots, The Best XCVR Made, A 5 Element Yagi Up 90', and a Linear Amp This One Requires: A Knowledge of Propagation Lady Luck Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] BS7H
A good lesson for all you guys that depend on the following to get you a new one: DX Cluster Spots, The Best XCVR Made, A 5 Element Yagi Up 90', and a Linear Amp This One Requires: A Knowledge of Propagation Lady Luck If you wanted a Give Away Extra, now you got it !!! ENJOY all the Lids, CB'ers, and QRM you invited in !! I got BS-7H back in '95 with a H.B. Vertical and 90W. Just for fun, bet I can do it again. :-) Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] DX who QSL or not
- Original Message - From: Charles Harpole [EMAIL PROTECTED] Sent: Monday, March 05, 2007 11:21 PM Subject: Re: [DX-CHAT] DX who QSL or not When I receive cash in a qsl request, I thank the sender silently and accept this donation to my effort to return qsls. Personally, I feel honor bound to reply to those with cash and those without. BUT, I do not think this idea should automatically apply to other people. My point is that one can not have it both ways that is, one can not send money as a gift* and at the same time expect that the presence of money REQUIRES a response. To think it requires a return, means you are ordering a qsl ... as any mail order from any vendor of a product... which is basically the act of purchase. How can it be otherwise--- if one sends $$$ with the expection of a return? I still maintain that to avoid the idea of a purchase, the cash sent must be a donation... a free gift with no strings attached, and can not be otherwise, rationally. A bribe is payment to do something not legal and thus this word does not apply in this matter because these are not matters of law breaking. *even if the cash is only meant to cover the sender's expenses, that seems to me to be like the free products businesses offer to send to you if only you will pay for the postage and handling. sounds same to me. Thanks for your ideas, too.. 73 Charles Harpole [EMAIL PROTECTED] -- I use nested envelopes for QSL requests, plain white for state-side and international air mail for overseas. I always fill out the return envelope with the recipients full address in the upper left-hand corner and my address in large print in the middle. For overseas, always remember to include USA below your address on the return envelope. For state-side I affix a first class stamp, and for overseas the correct denomination of stamps (air-mail) for the particular country involved. This is on my return envelope. For envelopes sent to mgrs of DX stations in a contest, I always send $2.00 in greenbacks with a sticky pad attached saying to help with QSL card costs. For envelopes sent to DX stations, in addition to my pre-addressed and pre-stamped return envelope, I either enclose 2 IRC's with note for your QSL needs, or $ 2.00 in greenbacks and a note to help with your QSL costs. I avoid sending cash to those countries that have strict mail customs rules, or where mail theft is a problem. 425 DX News, QRZ DX, The Daily/Weekly DX, etc is a source of this info. Since getting back on the air in 1994, my QSL return rate has been 100 % using this method. There have been times that I have had to send another such QSL request and a note saying I sent you you a card on such a date and did you get it. An example of this was an XV5 and a TU2. The replies in all these instances was Sorry, I didn't get your card. International mail does get lost or stolen. A C9 or TR8 with a good signal to the west coast can work a slew of W5, W6, and W7 stns. Most likely, he needs none of these cards, but he will sure get a lot of requests for his card. Remember, he has to pay for the cost of these cards, take the time to answer the cards, and exchange the IRC's for stamps. I always try to make it very easy for the DX stn to answer my QSL requests, and that is why I use pre-addressed and pre-stamped return envelopes. My ideas ! 73/DX, Larry - K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] DX who QSL or not (RX9TX)
From: Art RX9TX [EMAIL PROTECTED] Sent: Friday, March 02, 2007 1:45 AM Subject: Re: [DX-CHAT] DX who QSL or not Hello dx-chat, CH I firmly believe that no one OWES me a card. Yes they do. When someone makes a QSO, he does it for his own thrill, joy, pleasure, interest, ego, whatever. And QSO confirmation is a part of that process, so when he makes YOU to pay for HIS part of QSO confirmation (QSL-exchange, in our case), that is NOT fair. A QSL card has always been and will continue to be the final courtesy of a QSO. Larry - K4WLS ttp://rx9tx.qrz.ru Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] [dx-list] KH8SI
- Original Message - From: Tony Martin W4FOA [EMAIL PROTECTED] Subject: Re: [DX-CHAT] [dx-list] KH8SI Charlie, I heard you work them on 30 this morning...congrats. There has been a lot of criticism about the KH8SI team but I am sure they are doing their best under the present conditions. Yes, I've heard them working hundreds of JA's but after just listening to the 30 meter pileup this morning I have a better understanding of why. The op (no idea who it was) was working one JA after the other, with full calls each exchange...very, very seldom did he have to say JA4K?? or the like. I heard him two or three times trying to work a USA station...the one that stands out in my mind was when he said W2? 2 or 3 times then he asked K9? 2 or 3 times...the pileup continued at full bore with no one cooperating. He started back with JA stations after several unsuccessful attempts to work NA, again working full calls from JA. I've not heard them with a decent signal on any band so I'm guessing their antenna systems are not the best, which coupled with poor conditions makes it tough. It was interesting to note this morning that the FO/KM9D was S9 while the KH8 was barely S4-5..on 30 meters. If we don't work them on this trip, I would bet that someone with a well planned DXpedition will soon be visiting Swaines and it will be quickly removed from many of our need lists. Good luck to alllets just give them the benefit of the doubt. 73 Tony, W4FOA -- Tony, KH8SI was S3 this AM (31JUL06 0400 UTC ) with QSB. His sig started steadily increasing on my HB Vert until around 0600 UTC when the OP stated QRT USA then went QRT. During this period the Op continually did the following scenario: K8 ?? 599 BK TU UP K4S ?? BK TU The Op didn't get the entire call yet gave a 599 and the Op came back NOT with call of the stn wkd but only a TU. So who did he work ?? I got perfect timing from two replies of KH8SI with: K4 ?? 559 BK and, K4S ?? 599 BK but all the Op sent back was 559 TU, and 599 TU. That is not a confirmed QSO with me. Did he work me ?? Don't really know so cannot log it !! Jeez !! 73, Larry - K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] 3Y0X - 40M CW 15 Feb 06
0200 - 0530 UTC: WOW what a difference !!! QRG: ~ 7.021 MHz Good CONDX and skip long. Some stns calling on his QRG, but not as many as before. The key-down intentional QRM on QRG was only present after ~ 0400 UTC and was of short duration just a few times. Signal peaked to 599 here at 0205 UTC and stayed S9 for ~ 30 Mins. About - S2 of slow QSB. 3Y0X was monitoring his QRG and sending at ~ 28 WPM. Quite a few times he sent AS AS QRM QRM HI, went QRT for a few Mins then sent CQ CQ DE 3Y0X UP. Great !!! The QSO rate was much better than on eve of 14 Feb UTC. 3Y0X Op had pretty good ears. For me he had to !! Worked at 0239 UTC after CLG for ~ 30 Mins. My QRG was in the clear (as far as I could hear) and 1.2 KHz above 3Y0X QRG. Many TKS to the BIG OP in SKY. Was running 90W to H.B. 1/4 wave vertical. 3Y0X was S8 HRE. Gave me a 559, well he was giving all 559 or 599 :-) I kept my QRG 800 HZ to 2.6 KHz just above his QRG which was on the lower end of the throng. The throng was following his last QSO freq which was ~ 1 Khz to 20 KHz above his QRG. I waited for 3Y0X to come to me on lower end of throng. My W6ELProp has been right on the money. I did, however, change my reference signal level to .10 uV versus the Default of .50 uV to account for the sensitivity of the RCVR in my IC-765. I did this by adding 10 db in the Additive Signal Constant section of the setup. I also added 6 db for bands they are using the StepIR's and 9 db for their linears. I also changed the W6ELProp setup for a Minimun Radiation Angle of 5 Deg being optomistic for my verticals rather than the Default setting of 1 Deg - jeez an ant must be up 5 wavelengths to achieve any significant radiation at this angle. Doing this gives me a wider band opening window. If you would like to know how to customize W6ELProp for your stn power and ants, and the ants and power being used by a DXpedition, go to the www.mdxa.org home page and click on the Customize W6ELProp link. VY 73 and GL on 40M - you will need it like me, Larry - K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] K7C
Tony, From what I got from the DX Blurbs, the server is about 99.99 % maxed out with the log pages and and the DXA Page. For some reason the 30 and 75M entries are not all getting in. They are working on a fix both here an yon.73, Larry - Original Message - From: Tony Martin W4FOA [EMAIL PROTECTED] To: Larry, K4WLS [EMAIL PROTECTED] Sent: Thursday, September 29, 2005 2:12 PM Subject: Re: [DX-CHAT] K7C Just curious Larry, where did you get this info? It is interesting that some QSO's are entered within a few minutes while others are a day or two old and not thereseems a bit odd, doesn't it? I am particularly interested in the 30 meter and 75 SSB entries that appear to be missing... Thanks for the info. Tony, W4FOA - Original Message - From: Larry, K4WLS [EMAIL PROTECTED] To: Gerry Maira [EMAIL PROTECTED]; dx-chat@njdxa.org Sent: Thursday, September 29, 2005 1:55 PM Subject: Re: [DX-CHAT] K7C There is currently some probem in the uploading of logs, but sooner or later it will all get down. Seems the guys are having too much fun operating and resting a bit to load logs. Usually a 24 - 30 Hr delay time and word is that will shrink to nothing shortly, when they start calling Eu..just kidding Rag OB !!! Larry, K4WLS - Original Message - From: Gerry Maira [EMAIL PROTECTED] To: dx-chat@njdxa.org Sent: Wednesday, September 28, 2005 1:28 PM Subject: Re: [DX-CHAT] K7C I worked them yesterday at 20:31z on 20 cw and this morning at 12:18z on 30 cw. I heard my call clearly both times but neither qso is showing up in the online log, which appears to be getting updated regularly. Is anyone else having this problem? Or, did anyone work them on the bands/mode that I did at about the same time and make it into the log? Thanks, Gerry KA2MGE Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: K7C
Rag. These guys know what they are doing. They know that Kure is highly needed in Eu: #1 They have sarted off the right way by hacking down a lot of the USA and JA QRM which would be really loud when they do call Eu. They know about prop, and that only a few Eu stns were being heard and worked this AM ~ 0600 UTC. So with prop so bad to Eu, why not hack down a little more of the potential JA/USA QRM. #2 They have been controlling the pile-up very well so far, and I guarantee you when they do call Eu, they will be emphatic and put out the word no JA or NA. When this happens there should very little harping (QRM/jamming) from the USA or JA crowd since they got the first shots. #3 It's not over until the . lady sings !!! 73/GL/hang in there, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] K7C
Larry, I can surely emphasize with you, as I never did get through to them on 40M Mon AM with my 90 W and Inv Vee up 25 ft even though I was camped out of their freq. Seemed like a few simplex QSO's escalated into a few thousand linears and yagis covering 8 KHz in a matter of seconds. I never have been one to give up easily so I was back it this morning, and I did get them on simplex using a few tricks in my bag. Course, I been running low power and simple wires/verticals to work DX for 45 years. Please go to http://www.mdxa.org (Magnolia DX Association). Click on the DX Tips link and feel free to read the dozens of DX Tips I have written to share my experience and bag of tricks with people like you and me. Hang in there, perserverence and dermination almost always overcome all obstacles, even low power, mediocre antennas. I have also found that praying seems to help quite a bit as well. GL Son, 73, Larry K4WLS From: Larry Van Horn, N5FPW [EMAIL PROTECTED] To: dx-chat@njdxa.org Sent: Tuesday, September 27, 2005 12:05 PM Subject: Re: [DX-CHAT] K7C Glad we have a place to editorialize just a bit cause this is been eating at me for the 32 years I have been a ham. Now I can get it off my chest. Before I start I am NOT picking on any individual here by name. These are aimed at the DX community in general. Soapbox mode on! So congrads Rod and to the rest of you who have worked Kure and especially if you got them on more than one band and mode. Master Rod wrote: But guys you just can't believe how strong they are here on the southern Oregon coast. And you can't believe how incredibly weak they have been here in the mountains of SW NC. For me that is probably a function that I do NOT have a top of the line setup (high power and an antenna farm the NSA would be proud of). And while it is nice they are going to try and service the EU, it is sad that those of us not equipped with high power and huge antenna farms can't get through the wall of JAs and Big Gun US/EU hams who have already have Kure in their logbooks. The bunch at Kure said, It's up to the DXer to make the QSO by making the most of his or her own skills, wits, and stamina. That is hilarious. They missed the most important part: equipment and lots of money to buy it. The DXpedition said they would base their operating philosophy around a survey taken in a DX magazine. When these sort of DX surveys are taken, they are talking to the big guns on the Honor Roll and others looking to get on the Honor Roll. They do not address the thousands who are the casual DXers that have never even worked Kure Island before. I dare say some hams don't even know where Kure is at. ;-) So when you look at the US ham population and say, they do not need to give us as much time to the US, think about the number of little pistols they are leaving out here in the US. Those of us on the east coast that do not have big setups and high power. We are probably in as much of a disadvantage as some of our EU friends. There are a lot of us who have not had a shot and probably will not have a shot at Kure no matter what happens, because it just isn't in the cards. But from what I have seen and heard over the last four days it is sad so many will not break through any wall, US, JA or EU because so many are trying to fill out and complete their every mode and band sheet. There is nothing more disgusting to me than some big shot DXer bragging on the list or on the air that he worked them on every band and mode, while so many didn't even get sniff on one band or mode. From their website: We are still struggling with a huge amount of physical tasks--antenna commissioning, station protection, moving water and gasoline, working for the resident naturalist, etc. We are very tired, there is limited ability at this moment to respond to individual requests for bands, modes, skeds, etc. Incredible. You elite want them to cater to your individual request to set up a sked or asking them to get on your band so you can fill out a hole? I'm glad some of you have worked them on bands and modes you haven't gotten them on before. And to those of you who worked Kure again on a band or mode you have worked them in the past, I have just one thing to say. Nothing more illustrates my point than this statement from their own website: We expect to make more than 80,000 total radio contacts with 35,000 different persons during the expedition. You do the math, 45,000 contacts to get another band or mode for someone who has probably already worked the country. Their are a lot of us guys out here that would like to work them for the first time on any band or mode. I'm not interested in the DX Challenge, in fact, I could care less. A 5BDXCC award would be nice someday, but I won't go bankrupt to get it. The Navy in 23 years taught me patience and that has allowed me to slowly increase my country
[DX-CHAT] Off-Line
I will be off-line from tomorrow (Wed) until next Tueseday due to house remodeling. RR says no mail should bounce, but it has in the past when I have been off-line for such a long time due to computer probs. Steve - this applies to DX-News as well !! TKS, Larry [EMAIL PROTECTED] Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Yaseu FT-890AT
Anybody know what year (or approx) Yaseu starting building these rigs. Have found a nice looking one for a song with 500 Hz CW filter. Not familar with this rig - any comments appreciated !! Thanks, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Kindness Appreciated
Last night on 40M CW, an unidentified stn sent me a QLF. I replied QLF ?? He said, try sending with your left foot. I sent QRA ?? but got no reply. If you hear me on 20 or 40 CW please know I have been in the hosp 2X in last 5 wks and am recovering well from a mild stroke to the right side. My fist, however, is still quite skakey !! I only work CW, so working SSB would be a good thought, but I do not have a Mic and surely could not wire and solder a DIN plug ATT.MNI TKS, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, dx-chat@njdxa.org This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Lord Howe - VK9LA/VK9LW
Recvd mail from Bill, VK4FW, yesterday. QSL cards for this recent ODXG Op recvd from printers last week and QSL cards are beginning to be mailed out. Merry Christmas, Happy New Year, and Good DX !! Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] VE9DX Cluster Sites
Have not used VE9DX Cluster Sites in long time. Found the URL had changed. Here is new one if you interested. Might be old info to most of you, but will pass along: http://ve9dx.weblink.nbtel.net/telnet/sites.html 73, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] VE9DX Cluster Sites
Thanks the info Jim - nothing like a spare !! Have a good weekend. Hey Ron, WN3VAW, how you doing ?? Back on the air (even a little) yet ?? 73, Larry From: Jim Reisert AD1C [EMAIL PROTECTED] Subject: [:dx-chat:] Re: VE9DX Cluster Sites NG3K has a good list too: http://www.cpcug.org/user/wfeidt/Misc/cluster.html 73 - Jim AD1C = Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] A Great Feeling !!
Sure is a great feeling when you are on the bands working DX.. and a DX station calls you, knows your name, and says.. Thanks Larry for your QSL card The QSL - The Final Courtesy of a QSO Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] June 6, 2004
In loving memory of the U.S. Army 3rd Infantry Division, the U.S. Army Rangers, the 101st Airborne, and the 33,000 + American soldiers who gave their life on the beaches of Normandy and the farmlands of France on this day 60 years ago that an entire continent might be free. God Bless America and the families who gave up a son, father, or husband for freedom on this day. In the words of Winston Churchill.Never have have so few gave so much for so many Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] The Greatest DX
God Bless America and all those who serve Her in the armed forces of this country. May God, or whatever Name you perceive Him to be, bless the other nations of the world, and those who serve their country in the armed forces of their country. Pray for peace in Iraq, the rapid institution of a democratic government administered by the people of Iraq, so that our troops can come home just as We and the Iraqii people want them to do. Pray for world peace, brotherly love, and human kindness, one man toward another, and one sister toward another. Pray that there come a day when conflicts can be be resolved without looking down the barrell of a gun. We, the people of all nations, we are all truly brothers and sistors. Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Lest We Forget
Lest we forget those who have gone before us, and those who will come after us. Lest we forget those that serve now. Lest we forget those that paid the supreme sacrifice. No matter what army, what navy, or what air force that you served in, you served your country. No matter what war, or what conflict, even in peace time, you served your country. This is the day that we remember. Memorial Day 2004 Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] UA4WHX Pacific QSL Status
Last word I got from Vlad, UA4WHX, said he would start sending out cards from his Pacific Op around the first of May. The latest update below sounds like he right on schedule.73/DX, Larry, K4WLS - Original Message - From: Vladimir M. Bykov ua4whx@ To: Larry, K4WLS [EMAIL PROTECTED] Sent: Monday, May 10, 2004 6:26 AM Subject: Re: Greetings !! Hi Larry! How are you? The first cards are out. 10 days ago, started sending them. Takes time. That time that was mostly Europe and single QSL requests. Those with a few QSLs will be out a little later. They will have them all. But not before we get them ready, hi. ...And they (QSLs) will always come as a surprise. The way the operation did. Wait and see. Little choice anyway, hi. 73, Vlad -- To post a message the subject must begin with [:dx-news:] (all lower case) and sent to [EMAIL PROTECTED] Archives http://www.mail-archive.com/[EMAIL PROTECTED] -- Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Mail - Posts ???
Ron, WN3VAW, are you receiving my personal e-mails ?? Made a post to DX-Chat this afternoon, but I did not receive a back-copy, so don't know if it went out or not. Had the same problem with DX-News. Are there still some glitches out there ?? 73, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] T33C On-Line Logs
If your QSO does not show up after the on-line log update, exit the web site, bring it back up, and check on-line logs again. My 40M QSO did not show up after checking twice. I exited the web site, brought it back up, checked on-line logs, and it now shows up (). Must be a glitch somewhere. 40M was only band I needed them on (Whew !) GL, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: How Would You Respond
From: Ward Willats [EMAIL PROTECTED] Subject: Re: [DX-CHAT] Ref: How Would You Respond --- Ward, You brought up a great point about being careful to be on our best behavior. This is certainly applicable to the Extra bands but all as well. If we all tried very, very hard to be on our BEST BEHAVIOR, i.e. pretent Big Brother, the FCC is listening in, and knows all our call signs, just think: (1) We would always ask QRL ?? a few times before plopping down and calling CQ. (2) When we heard a DX station working a string of stations, we would always tune up to see if there are stations calling him up frequency to see if he was working split. There would be no stas calling the DX on his QRG when he working split, no QRM to others, and no need for Traffic Cops who cause additional QRM with the Ups. (3)With no QRM on the DX QRG, the Real Crusty Extras would not be sending Lids on the DX QRG, or laying down a carrier to express their disgust. (4)If there are no Real Crusty Extras sending Lids on the DX QRG, there would be no other helpful souls trying the stop the Real Crusty Extras, and no dogfights on the DX QRG. (5)If you had a new rig and wanted a check of your audio on SSB, you could send a polite Break Please to two strong stations engaged in a QSO without a Get F-d in return. If your audio was bad, they would say OM, your audio is very distorted instead of Throw it in the Sh-t Can. (6)Well..one could go on and on...but wouldn't it be very, very pleasurable operating if we all tried very hard to be on our very best behavior...I think the key here is to always be very mindful of what we are doing, and to always be considerate of other Hams...think before you hit the key or mic switch.and always keep in mind how you would like to be treated by others on the bands. (7)Think we just went back to that Golden Rule again :-) 73, K4WLS [Snip, Snip] and below 7025 was out of the question. Even today, I'm on my best behavior down in the extra segment and try like crazy not to embarrass myself when chasing the odd DX or what-not down there. So I think it is perfectly fine to expect a reasonable level of competency when someone keys in that segment. I also think grossly incorrect QSL information is inexcusable and a 4 WPM character speed is undecipherable! True, there may be some handicap there, but general cluelessness is the more likely case. That said, I would not have known what AS means either -- it is a traffic prosign and I just don't hear it on the air in regular QSO. (On the plus side, I know it now!) The FCC only tests on DN, AR, SK and BT. I'm also not sure I would have understood T9 either (depends on context), though I may well have figured it out -- I would not expect _you_ to be telling _me_ about your own tone without more explanation than can reasonably be done at 4 WPM. de, thks, gn, ge, tu, cut numbers, Q-codes -- these your hear a lot and figure out quickly. (Well, cut numbers besides T threw me the first time I contested, but...) So yes, on these two more obscure behaviors and idioms I think a little ole crusty Extra is, in fact, showing. Least that's the view from these fresh eyes, FWIW. 73 -- Ward / KG6HAF P.S. No one ever answered Steve Glibert's, G3OAG, query on 3/26 about whether QSL cards for WAS have to indicate 2-way (2X) or not to be good for the award. Since I just QSO'd my last state today for WAS CW, and I have a creative card to two without this specified, I'm interested in the answer to this too. Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Issue Resolved
Thanks to the help of Urb, W2DEC, and Doug, W4OX, the issue of the copied material from the MDXA web site has been resolved. A sea lawyer I may be be, but this copyright was all new to me !! Years ago when [DX-News] was [NJDXA] and rather informal like [DX-Chat] now is, I passed on many DX Tips to fellow DX'ers. Sure, I put my name to them, but I wasn't concerned that they were republished (and a few were I later found out), or I got credit for them. When I write a knowledge or technical based DX article which is published on my DX club's web site, however, things take on a different light. I am more intent on protecting the integrity of my DX club's web site than protecting, per say, what I have written. The article may legally belong to me, but when my DX club sees fit to publish on our web site anything that I have written, personally, I have given the article to them. Also, I would like to say thanks to the President of the other orgainization who was very undertanding and very timely in removing the copied material. When Hams help each other, and DX'ers help each other, putting pride and personal convictions aside, things almost always work out for the best. Also, thanks [DX-Chat], Ron, and NJDXA for providing this means of communications and the unlimited resources it provides for help to all DX'ers. Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] Unethical Practice
Ref: Post by K4VUD Charles, Please read my Post again. Not once did I broach the issues of plaegerism (I can't even spell it) or copyright. I did stress the issues of ethical practice, honesty, and principles. Unfortunately, most of the American people today do not understand what these words actually entail. Many of the ones that do like to water them down. 73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] The Anatomy of List Nets
The Anatomy of List Nets Very few people take for face value what you write. Instead, they had rather read between the lines. There are usually on average about 3 people who want to disprove what you have said, just for the sake of disproving it. There are usually on average another 3 people who like to psychoanalyze what you have said. These people have no documented credentials in psychology. There are always a few idiots who have no clue as to what you have said, but want to get their two cents in anyway. Those that disagree with what you have said always send their comments to the list net. Those that agree with what you have said always send you a private mail. Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] W6EL E-Mail Address
Anyone have the e-mail address for Sheldon Shallon, W6EL ? I need to correspond with him concerning an article I have written about W6EL Prop. I used the e-mail address [EMAIL PROTECTED] which is listed in the Winter 2004 RAC, but my mail was returned as recipient mail disabled. Thanks, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Symantec - Once More - Please no More !!
About 3 weeks ago I posted all the toll free phone numbers for Symantec Technical Support, and stated that I was not a representative or expert on Symantec software. I am still getting many mails asking for assistance with unusual names and no call sign. All mail has the Subj: [DX-Chat] Norton System Works/Symantec. I do not know if this has turned in to a prank or not. Here is the info again, and I am sorry but I will answer no more personal mails on this. Symantec Tech Support: 1-800-927-3995 Anti-Virus Subscriptions: 1-800-441-7234 Symantec Product Sales: 1-800-351-1791 You can fix many problems yourself, and even receive detailed easy to follow instructions for removing viruses at: http://www.service.symantec.com/fixitJust follow the links for your particular situation/problem. Please print this out for future reference. Please no more mail, as I will just hit the Delete key. Sorry, but I would not be able to do any more than give you these phone numbers anyway. If you put my mail address on another list net, would you please put these phone numbers as well. TKS, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Symantec Info
This is not a commercial, and I am not a proponent or solicitor of Symantec products. I offer this info only as a help to my fellow DX'ers who might need help. Also I am no expert on these products. I have received some mail for help, and the following is my best advice: For sales, problems with product purchases, please call Symantec Sales toll free: 1-800-351-1791 For installation assistance and problems with Norton System Works or Norton Anti-Virus, please call Symantec Technical Support toll free at 1-800-927-3995. You could be charged $ 29.95 for this service, but all the times I have called (about 20) about a problem with a product, I have never been charged any money. For help with removal of a virus, call toll free at 1-877-832-2811. You could be charged $ 69.95 for this service. For Symantec Firewall Technical Support, call toll-free at 1-877-832-2810. You could be charged $ 29.95 for this service. I have never been charged any money for help on a firewall product I was using. Many of the problems that you experience with Symantec products and for the removal of viruses, you can do yourself by going to: http://www.service.symantec.com/fixit . Just follow the links for your particular problem. I post this only because many folks may not know these phone numbers or the availiability of technical info for do it yourself solutions on the Symantec web site. 73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: RFI Prevention Techniques (Little Correction)
Sorry folks, due to congestive heart failure, I am having a very slow recovery from a bad case of the flu, and a foggy head to boot: A .01 uF capacitor across the hot and neutral sides of your power strips for 2 wire AC distribition systems should be good for all RFI frequencies. Since Xc = 1/(6.28 x f x C) , as f increases, Xc will decrease. If Xc is 2.5 Ohms at 7 Mhz, it will be 1.25 Ohms at 14 Mhz, and .625 Ohms at 28 Mhz, etc. Judging by the mail I received on this post, I should have added this: For each AC receptacle on your your power strip, the short straight slit is Hot, the long straight slit is Neutral, and the round or sometimes half-round socket (forming the top of a triangle) is the Ground - this the socket that you connect the banana plug to on the wire going going to station ground. P.S. On all new quipment you buy, check to make sure that ground side of the AC plug is actually connected to chassis ground using a DVM. I bought an Astron 50A Power Supply few years back. A DVM check of the resistance from the ground side of the AC plug to chassis ground showed an open. Problem was a thick coat of paint preventing the lock washer on termianl lug connectrion from making good contact to the metal chassis. The wire to this terminal lug was connected to the ground side of the AC line in. A floating or ungrounded equipment chassis acts like an antenna to RF. GL - 73, Larry 73, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Some RFI Prevention Tips
Here are some simple RFI prevention techniques that I have learned here at home with the rigs and computer, so thought I would pass them along in hopes they might help someone. I live in an old house with a 2 wire AC distribution system (Hot and Neuteral). My 40M Inv Vee is only 10 ft away and broadside to the back of the house. My 40M CW was raspy, as RF was getting into the AC distribution system. I was using power strips with EMI and Surge Protection circuits, but they were effectively disabled. Here is why: The EMI circuit consisted of two small inductors, one in series with the hot and neuteral inside the power bar, and there were two .001 uF capacitors from the hot and the neuteral lines to ground inside the power bar, but No Ground. My station ground was a 10 ft copper clad ground rod just outside the window. I used some # 14 stranded wire and soldered banana plugs to the end. I used this to connect my station ground to the ground side of an unused receptacle on all my power bars. Now my 40M CW signal is clean as a whistle. I share a computer with the family which is in the den just across the hall from the shack. The computer and printer are plugged into a power bar also, but no ground. Everytime I keyed the rig on 40M, I rattled the printer. Running a ground wire to the power bar for the computer was out, so I did a little math. The Xc of a .01 uF capacitor at 7 MHz was 2.27 Ohms. At 60 Hz, the Xc of the capacitor is 265 KOhms. I connected the .01 uF capacitor (a 2 KV silver mica) across the hot and neuteral side of the power bar by soldering the leads to an old 2 prong AC plug and used shrink tubing for insulation. I plugged the .01 uF in the power bar, and now no more printer rattle on 40M. I had previosly tried several different torroids on the printer AC line, but no go. If you have a 2 wire AC distribution system in your home and are plagued with RFI to your computer or rigs, connect your station RF ground (ground rod system) to your power strips using a banana plug, plugged in to the ground connector of an unused receptacle. If this is not feasible (as in the case of my computer) a .01 uF capacitor across the hot and neuteral should be good for RFI at 30M and lower frequencies. For RFI at 20M and above, use a .001 uF capacitor to get the Xc down low. For 120Vrms, the peak voltage on the positive and negative alternation is 170 Volts, so use a capacitor with a voltage rating of at least about twice this (500 VDC should be good). The surge protection circuit in most power strips consists of two MOV's, one from the hot side to ground, and another from the neuteral side to ground. With no ground connection, however, they are doing no good. So, in my situation with the computer, I soldered the two leads of an MOV to a two prong AC plug, and plugged it in the power strip so that it is across the hot and neuteral. For a two wire AC distribution system, the neuteral is connected to ground (by a ground rod) at the service entrance, but after many feet of run, the neuteral line acts like a good antenna. 73/GL, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Symantec/Norton System Works Problems
Some YL sent me a mail this AM regarding some probs with Norton System Works. I had about 95 mails and lost it - I was having computer probs also. If you have a prob related to Norton System Works or a Symantec product, here is a way to save time (the average wait on Tech Support lines is 20 mins these days), and some money. Go to: http://www.service.symantec.com/fixitLeft click on the yellow block to the left of your product (i.e. Norton System Works) and follow the appropriate link(s) for solutions to your problem. Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Firewall
About 10 days ago I asked for an easy to set-up and use shareware/ freeware firewall. I received 15 mails in reply, and 13 recommended Zone Alarm. I downloaded the installation file for the free version of Zone Alarm. Last night I got up enough courage to install and set-up. Well, the program basically sets up most things itself during installation. Since I am running Norton SystemWorks, I read the help files about how to include other files/programs requiring internet access, so I manually added Live Update and Symantec NetDetect. Still yet to see if a virus def automatic live update makes it through OK :-) :-) The Help Files are great and very easy to understand. I have been running a computer for 4 years with no firewall, so I did not really think I had a problem with hackers - boy was I wrong. After running computer for 4 hours last night and 2 hours this morning I have had 92 intrusion alerts. 81 of these were pings (internet noise - low threat), but 11 were high threat alerts where my ports were trying to be accessed or scannned. Sure made a believer out of me for the need for a firewall. Thanks all for your help - Larry K4WLS P.S. Would someone please fix the bands. I have been through 4 solar cycles, and this is the worst decline and the worst long time bad prop I have seen on the bands in 45 years !! Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Big Symantec Prob - Mail Washer
If you running Norton SystemWorks, and after downloading the Virus Defs of 7 or 8 Jan, your computer running excessively slow, it takes forever to open the NSW Main Program, or you cannot manually connect to Live Update, you got hit with the Verisign Trust Certificate problem. Hold times for Symatec Support lines have been around an hour yesterday and today. Yesterday I kept a speaker phone on for 50 mins. As far as I know this was only a prob for I.E. 6 - Symantec still investigating. Correct Fix: go to www.service.symantec.com/fixit You will automatically be transferred to the correct page. Click on the blue text link, under the text If after dowloading the Virus Defs of 7 or 8 Jan.. From the link you can install the most up to date Verisign Trust Certificates. The install program will by default put the Trust Certificates in correct place. Bookmark the original Symantec page you got from the URL above. Symantec still investigating, and will add more info to page as they get. Easy Fix: Go to I.E. Properties Advanced Tab Security Uncheck the block that says Check for Publishers Revocation Certificate. Also the block under that if checked (this block is not a default block), but the Check for Publishers Revocation Certificate is a Security default setting. If you did the Easy Fix first, you can go back, re-check the block Check for Publishers Revocation Certificate after doing the install of the updated Verisign Trust Certificates. -- If you are using the Mail Washer program to routinely bounce Spam mail, please note that it is your mail address that is sent as the originator of the bounce mail, and not the address of your IP. When you do this, you are letting the originator of the Spam know that your mail address is good. After using Mail Washer to bounce Spam mail, my Spam mail showed a significant increase. If you got questions, especially about the Symantec problem, you can send me a personal mail. Can't do clusters or check for MGRS if got a computer prob, just to make this post legit :-) :-) LarryK4WLS Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/GOLIST/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: Symantec Big Problem
If you go to www.service.symantec.com/fixit and do not readily find If you downloaded the Virus Defs of 7 and 8 Jan... or clicking on the blue text link underneath does not bring up the program for installing the Updated Verisign Trust Ceertificates (looks like Symantec has already changed the page).. Scroll further down the page and click the + link next to Norton SystemWorks, and see if that will bring up the link for installing the Updated Verisign Trust Certificates. Although Symantec did not mention this, if you are unable to DLL and install the Updated Verisign Trust Certificates, try the I.E. Quick Fix first - your old Trust Certificates may be preventing you from accessing the program for installing the Updated Trust Certificates, or it might prevent you from downloaded and installing the Updated Trust Certificates. Yest morning, I was unable to open the NSW main program, I could not right click on a file for Properties, and my machine was running extremely slow - thought my HD had lapsed to the DOS Compatibility Mode. Refreshed Drivers for all hardware. Still same - thought I had picked up new virus that Symantec had not put out Virus Def for. Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Firewall
About 2 wks ago, I asked for an easy to use/set-up Spyware Detection Program, something that was freeware/shareware and I could DLL from internet. You guys came through with LAVASOF Ad-Aware Vers 6.0 (free), and it is great. Now I am looking for easy to use/set-up Firewall. Something that will live with Norton SystemsWork and will not prevent the automatic update of virus derfinitions. Last year I ordered a Norton Firewall. I read through the manual, and the set-up sounded like the pre-flight check list for a 727. I should know, had P/P including instrument, twin-engine (also turbo-prop and jet), and helo ratings for 30 Yrs until Thyroid Eye Disease would not allow me to pass Flight Physical. Ham Radio and flying - nothing better !! Now being an O.F. prefer simpler side of life. Thanks DX Chatters, you guys/gals are great, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: Spyware Detection Software
Many thanks all. The Lavasoft Ad-aware Vers. 6.181 is easy to use and thorough. I found to 2 spy files right off the bat, and it also included my PC Health Data Collection files as possible bogies. I added the PC Health files to the Ignore List (good feature). Great little FREE program. Thanks again, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ham's Night Before Christmas (Oldie but Goodie)
A Ham's Night Before Christmas ~~ (Yet another corruption of Clement Clarke Moore's classic Christmas tale, this time distorted by Gary Pearce KN4AQ, and the Raleigh Amateur Radio Society, Raleigh, NC, December 2, 1996.) Twas the night before Christmas, And all through two-meters, Not a signal was keying up Any repeaters. The antennas reached up, From the tower quite high, To catch the weak signals That bounced from the sky. The children, Tech-Pluses, Took their HT's to bed, And dreamed of the day They'd be Extras, instead. Mom put on her headphones, I plugged in the key, And we tuned 40 meters For that rare ZK3. When the meter was pegged by a signal with power. It smoked a small diode, and, I swear, shook the tower. Mom yanked off her phones, And with all she could muster Logged a spot of the signal On the DX PacketCluster, While I ran to the window And peered up at the sky, To see what could generate RF that high. It was way in the distance, But the moon made it gleam - A flying sleigh, with an Eight element beam, And a little old driver who looked slightly mean. So I though for a moment, That it might be Wayne Green. But no, it was Santa The Santa of Hams. On a mission, this Christmas To clean up the bands. He circled the tower, Then stopped in his track, And he slid down the coax Right into the shack. While Mom and I hid Behind stacks of CQ, This Santa of hamming Knew just what to do. He cleared off the shack desk Of paper and parts, And filled out all my late QSLs For a start. He ran copper braid, Took a steel rod and pounded It into the earth, till The station was grounded. He tightened loose fittings, Resoldered connections, Cranked down modulation, Installed lightning protection. He neutralized tubes In my linear amp... (Never worked right before -- Now it works like a champ). A new, low-pass filter Cleaned up the TV, He corrected the settings In my TNC. He repaired the computer That would not compute, And he backed up the hard drive And got it to boot. Then, he reached really deep In the bag that he brought, And he pulled out a big box, A new rig? I thought! A new Kenwood? An Icom? A Yaesu, for me?! (If he thought I'd been bad it might be QRP!) Yes! The Ultimate Station! How could I deserve this? Could it be all those hours that I worked Public Service? He hooked it all up And in record time, quickly Worked 100 countries, All down on 160. I should have been happy, It was my call he sent, But the cards and the postage Will cost two month's rent! He made final adjustments, And left a card by the key: To Gary, from Santa Claus. Seventy-Three. Then he grabbed his HT, Looked me straight in the eye, Punched a code on the pad, And was gone - no good bye. I ran back to the station, And the pile-up was big, But a card from St. Nick Would be worth my new rig. Oh, too late, for his final came over the air. It was copied all over. It was heard everywhere. The Ham's Santa exclaimed What a ham might expect, Merry Christmas to all, And to all, good DX. Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ode to the CW Contest
Ode to the CQ WW CW Contest Every year the CW seems to get faster and faster. Every year the competition seems to get fiercer and fiercer. Every year I seem to work fewer and fewer new ones. Every year my stints at the Op Table seem to get shorter and shorter. Every year I seem to get up on Sat and Sun mornings later and later. Every year I seem to be getting older and older. :-) :-)Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Thanksgiving Greeting
Happy Thanksgiving Urb, Steve, and Ron And to all you DX'ers world-wide, happiness, peace, and best wishes to you and your family. May you work a bunch of new ones this weekend, and get TO4E/TO4WW if you need !! VY 73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] TO4E - 12M CW
There was a fairly good opening this morning beginning around 0715 E.S.T. (1215 UTC) from TO4E to USA as far North as PA, and as far West as TX along the sunrise gray-line. This was on 12M CW. As the Winter solstice is approaching, the Earth is getting closer to the Sun which means the ionosphere is rapidly inonizing just after sunrise. This allows propagation on the higher bands. If you have a few minutes of daylight before having to leave for work, you might check 12M in the mornings, also 15 and 10M for TO4E. GL/73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] other reasons to oppose BPL
From: Charles Harpole [EMAIL PROTECTED] Also, check me but I think that if BPL RF can get out to disturb hams, isn't it true that ham sigs can GET INTO the data streams of BPL and unintentionally QRM the BPL ? -- Charles, This is very true. It us call the Reciprocal Effect. 73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] A Little Nostagia
If you would like to bring back a little nostalgia and re-live your Novice days, turn down your keyer speed and come on down to 30M. 30M seems to be a very popular band for the new hams dipping their feet in the CW waters for the first time and those honing their CW skills. Most of these Ops have an excellent signal and they really appreciate a QSO, especially from the older, more experienced hams. Remember your Novice days when everyone always traded QSL cards ? Well, just offer your card by saying, QSL via QRZ.Com, and I will send my card right back. Sit back and watch your mail box fill up. In the past two months, I have accumulated a stack of about sixty cards, and I am not far from WAS. Also, you get some very nice, appreciative comments on the incoming cards. Also 7040 KHz on 40M seems to another favorite spot for newcomers to the CW sport. Jump in, have some fun, and help further the CW cause !! 73, Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Cluster Report Format
Think this a good idea. Let's you know who is doing what with what. I shall start doing !! FYI: Found BQ9P on 14017.9 this AM at 1050 UTC Clg CQ USA with 579 sig on my vert. K=0, and A=8. His sig hung in there until about 1330 UTC when it was 519 here in NC with some auroral flutter. Maybe show up again Sat AM. Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Only Mother Nature Knows
Last few days, I been tinkering with W6EL Prop trying to get it to spew forth some LP Prop from VK9/X to NC. Skewed the solar indices up an down, inside and out. Added gain to my vertical, lowered the radiation angle. Decreased the path loss, still no LP Sunday PM around 2330 UTC, VK9XN Long Paths to the East Coast and Mid-West...Ha !! Speaking of Mother Nature - trouble in 3C - probably had something to do with a woman. Don't get me wrong ladies. Women themself are usually no problem. It's the men who usually cause the problems. General Patton had a whole Army of men, and he knew all about bad problems with women and men. President Truman, you know, was very insecure about his presidency. He was always worried that after the war, some retired General would beat him out of a term. I have often wondered if Patton's car accident leaving Great Britain was just a fluke, or Truman had his brakes tinkered with. Truman was especially worried about the General with the corn-cob pipe who was in charge of the post WWII military to civilian transitionary government in Japan. This General who had no political ambitions still holds the record for the largest ever ticker-tape parade in NYC. This General also knew about bad problems. Well.maybe we shall soon find out what happened that was very bad in 3C. Truman also found out about a General he wan't even worried about, some guy by the name of Isenhower. Only Mother Nature Knows Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Country Names
Wellpersonally I prefer Rhodesia over Zimbawe, and Burma over Mynamar, but I am an O.F and I grew up with these names as a young SWL and DX'er. With the end of the Colonization Period and independence, many countries have chosen more traditional names in the native dialogue. I am sure that we would all prefer United States of America rather than keep the old name of New Britainia. The New Hebridies sounds much more romantic than Vanatau - I can't even spell it off the bat without looking it up, much less pronounce it correctly. If you try to pronounce it in English from the correct spelling using what you think the correct syllables are, 99.9 % of us will mis-pronounce it. Whatever we think, is just whatever we think. We are all entitled to an opinion, right or wrong. These countries, however, have gained their independence like we did, so they are certainly entitled to a name of their choice. I am sure the people of these countries could care less whether we like it or not. and like it or not, it is Hatfield, Zimbawe. Oddly enough the large towns in these countries have, for the most part, retained their original names. Of course Ho Chi Minh City is a definite exception, but I think the former South Vietnam is definite exception altogethor. (Strictly an opinion). Guess I better QRT - beginning to mix politics with DX'ing - not good ! 73 and Gud DX (whatever you want to call it), Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] New Q Signal - QRT
H.many times good intentions end up with just that, good intentions. To my knowledge, we amateurs world-wide can adopt any operating practice we like as long as: 1. That practice is withinin the guidelines of the laws and regulations governing the issuance and use of our license. 2. That practice is in keeping with the spirit, fraternalism, and international good-will of amateur radio. Since ?? and QRL?? don't seem to be too badly broken on the bands, most of you have said, Why fix them ? Thanks all for your imput !! With all the changes in the world in the past 100 years, isn't it great to know that the original form of RF communications, CW, is still very much alive and thriving well. Thanks and Good DX All,Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] New Q Signal Need
Would someone at ARRL who is in a leadership position take the following for action, pass it through the hallowed halls, under that curved piece of wood, and promulgate in the right direction. Oh, Wayne Mills, what say OM ? We CW Ops have needed an appropriate Q Signal for years for Is the frequency in use ? QRL ? - Are you (your station) busy (sending/receiving traffic) ? does not fit. QRZ ? - Who (what station) is calling me ? does not fit. I though about QFU: F - Freuency, U - use. That does fit, but well we CW Ops know that at times (especially in unruly pile-ups), we hear all too many FU's. So...What about QFB ? - Is the Frequency Busy (in use) ? What say CW Ops - can anyone come up with a better one ? On SSB, Is the frequency is use ? - that's easy. We CW guys need something more fitting than QRL or QRZ ! Larry - K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Autumn is Here /Solar and Gephysical Forecast
Last Mon when the prop condx were better than normal, I noticed that the Autumnal 20M LP has returned. From NC, 20M LP was open to the S. Pac around 1230 UTC. Matter of of fact, caught H44VV on his first CQ. From 1300 UTC to 1400 UTC, 20M was open to the Indian Ocean with FR5FG worked, and heard a VQ9 running a big pile-up. The VQ9 was really loud here. 40M LP is prob also around, but the ionsopheric storms due to coronal mass streaming are keeping the paths closed. Here is a good NOAA web page that gives the Current Solar and Geophysical (ionospheric) Conditions. It also gives a 3 day forecast of solar and geophysical conditions which I have found to be pretty accurate. Many of you prob already have it, but maybe some of you do not. http://www.sec.noaa.gov/forecast.html There are also some other good links, such as Current Space Weather which can be found from the NOAA home page: http://www.noaa.gov The links are there including the latest WWV forecast, but you really have to sniff them out. 73 and DX, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Some Thoughts on DX Pile--Up/QSO Coutesy
Early this past Mon morn, H44VV (UA4HWX) had a nice simplex pile-up going on 7.0046 KHz. H44VV was using proper QSO exchange procedure in that in his ending QSO XMSN, he was giving the call sign of the station he had just worked and his own call sign. A big problem, however, was that most stations trying to work H44VV were not waiting for him end his QSO exchange. Instead, they hammered their calls while H44VV was still transmitting. Do stations doing this not realize that if H44VV is still transmitting, he cannot hear their initial calls ? Also, do they not realize they are many time preventing the station that H44VV just worked from confirming his QSO ? Also, do they not realize that they are blocking the call sign of H44VV, preventing other stations from getting a proper call sign ID ?? It was very evident that the stations who were prematurely calling H44VV were running high power and/or high gain antennas. Oh yes, I got through to H44VV with my 100W and little Inverted Vee, but I had to use a little trick up my sleeve. I just wonder how many other Little Pistols didn't make it, however, because of this premature calling. Why is it common practice these days for stations working DX to never give the call sign of the DX station they worked ?? Are they trying to save time giving the opportunity for other stations to work the DX, or are they purposely omitting the call sign sign of the DX in order to not help another station work the DX ? I do belive that FCC Regs still require the ID of your station and the ID of the station you are in contact with at least once during a QSO. Just some thoughts folks.. 73 and DX, LarryK4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
Re: [DX-CHAT] Yemen - and the Implications
John, NT5C wrote: H. I guess I'm the one of the few optimists left in this hobby. Amateur radio does indeed face a big problem: BPL. However, in other respects it's doing just fine. More talented and interesting people are coming in since we lowered the CW barricades, and CW itself seems to be doing very well now that it's an art to be enjoyed not a hurdle to be surmounted (witness the all-CW DXpeditions at V63SXW, V63TXF and VK9XAB). Also, I'm told that numbers in the CW contests are holding steady from the USA and going up from Europe. And if you're bored because you've worked everything on the high bands, start again on 40/80/160M - or if that's too easy, on 40M SSB, or SSTV, or PSK31. Conditions on 40 are really warming up, and I anticipate a great fall. Heck, there's even a REAL Democrat to support in the presidential race! What's all this pessimism? - No pessimism here, I am an experienced optomist :-) :-) And gutters I have the long stretches of aluminum gutters on the front and the rear of house connected by wires. I feed the center of one wire with 300 Ohm ladder line. Makes a great 40 or 80M antenna with high angle of radiation to get that cross section of America. :-) :-) Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] The New DX-News
For the past few days I have been reading the mail on the new DX-News. I must say it has done my ole heart good, and brought back fond memories of years gone by when [DX-News] was [NJDXR]. On Saturday nights, for those of us that didn't make it out to one of those Iron Chef places, [NJDXR] became for a few hours one large range 80M round-table DX discussion net. Now thanks to the insight of Urb, Steve, and others we have this list net solely for that purpose. For the past three years, Urb, Steve, and Ron have stuck with me through thick and thin, and more often than not it was thin. One of these days I hope to meet Urb LeJeune in person, as I personally know he is a one in a million guy. Here in NC there is a Marine Corps base called Camp LeJeune. LeJeune is a name that you do not run across very often. I happened to ask Urb one evening in a mail if there was a connection between his last name and Camp LeJeune. Turns out there is direction connection. Maybe Urb will post the URL so you can read about the namesake of Camp LeJeune. Urb is a pretty modest guy, but maybe he will. Bottom line is I am not blowing smoke or nose-gating anyone, I would just like to thank Urb, Steve, and Ron for being a true freind to me through thick and thin, and for all us DXers, keeping the news and chat coming. By the way, Steve is The Chandelier Man. Once in awhile you will hear him rattling the chandeliers saying, This discussion is moved to DX-Chat. :-) :-) Anyway, a great big thanks to DX-Chat, DX-News, Urb, Steve, and Ron. Still trying to locate one of those Band Fixers ! 73 and don't give up on the DX - there is still some out there ! Larry, K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: Dinosaur Cradle
Subject: Re: [DX-CHAT] [DX-NEWS] jt1co To those of you who may have his card - what is a dinosaur cradle? :) 73, Zack W9SZ Hello Jack OB, Yes, all my direct cards from Bat were sent Via Japan. Archeology digs in Mongolia have came up with the skelical remains and volcanic magma imprints of dinosaur life that carbon date to be the oldest found. So, Mongolia is considered to be the dinosaur cradle of the earth, i.e. where they first came from , first evolved, or were first created (depending on you philosophy of creation). 73, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] T31MY
Hi Folks - Anyone beside me NOT got a T31MY QSL via OM2SA for the T31MY Jan Op ??? TKS DX-Chat, Larry Ron: Cool Background on Admin Post !!! Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: T31MY
Here is what I have been able to find out: OM2SA had mailed out approx 3,000 cards as of the middle of June. Still over 43,000 to process as of that time, and more trickling in. Hmmm...I have plenty of patience in a pile-up - maybe it's because I only running 100W/Vert/Wires. Maybe I was a bit under-patient on T31MY - it is the ONLY outstanding confirmation needed on 40 M CW. Everything worked on all other bands confirmed. Or.maybe it is because I am acutely aware of the many QSL card Black Holes out there. Thanks for replies - now I much more calm, and will prob get by w/o the Zanax tonight :-) :-)Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Old Age Tin Ears - SV9BN
Thanks all - that was really SU9BN, a good catch if you needed. A SV9 that wasn't SV9/X would have been a better catch for me. Looks like this old die hard CW man gonna have to switch to Simple Slop Bucket - persish the thought !! Thanks all for keeping me straight !! 73, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: Lone Sta DX Op 7P8/3D2A
MNI TKS all the mail. I had Dave's call wrong. It is 7P8DA and not 7P8SV. I tried a long shot this morn to see if 20M would be open from 7P8 to NC just after sunrise in 7P8, and also to see if one of the 7P8 guys was on 20M. Well Lady Luck was there. Worked 7P8IZ, Igor - W0IZ, on 14.005 Mhz at 0615 UTC (0215 local). Prop was sure shakey to East Coast. He was 539 - 559 with lots QSB. Igor was calling CQ more than working stas at this time. I called 1 KHz up and he came back to my first call and gave me 559. I told him to tell Dave hello for me. The Europeans were copying Igor, but none could get through. Now that's a switch. Igor's signal steadily improved to S7 over the next 45 mins and he started getting a pile-up of mid-west and west coast USA stas. After about 45 mins, Igor fastly went into the noise level. Still trying for Dave, 7P8DA, on the low bands. Again TKS all for the mail and info. 73, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Lone Star DX Op - 7P8SV et al
Any you folks hooked up with Dave, 7P8SV (K4SV), in Lesotho yet ?? If so would you pse send me a personal mail and let me know band/mode/time/ur QTH. My W6EL Prop shows limited openings on 40 and 30M for QTH in NC. Slow moving cold front in mid-west been keeping S.E. inundated with nasty thundersorms last 3 eves, so op time limited and when no storms nasty QRN. Also have not heard a sta from AF on any bands in months. Only thing I have heard to East in Southern Hemisphere on 30M has been 3B8FG. Course now I only running a good vertical and no tower/yagi !! This constant solar wind from a favorably positioned [favorable position ??? :-) :-) ] coronal hole keeping the Bz component of magnetosphere irritated with resulting ionospheric disturbances is really getting to be a drag !!! I don't need 7P8 on any bands, but would like to hook up with good friend Dave, 7P8SV. Please reply direct: [EMAIL PROTECTED] Thanks much for your time/BW, Larry K4WLS Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: QTH Lat/Long
Many thanks all the input folks - this was interesting. Using the TopoZone web site provided by Jack, I got right down to the neighborhood and street in Belmont, NC where I live. The map showed Belmont Jr. High instead of Belmont High School so the map was as recent as 23 years. Clicking the mouse on the exact location of my house on my street gave me: 35.239 N, and 81.047 W I do live in an old section of town where the streets and geography have not changed in at least 63 years. If you live in a new sub-section or housing area, TopoZone may not work for you, since TopZone is based on the latest USCGS maps. Using the ZipInfo web site provided by Urb, I just entered my Zip Code of 28012 and got: 35.234 N, and 81.041W I do live close to the post office. If your QTH is within reasonable distance to your post office, the ZipInfo web site is much easier and faster to use. In my case the difference is negligble and sure won't make any difference in my sunrise/sunset times for my GeoClock program or propagation predictions by W6EL. Many thanks again all - you guys/gals are great !!Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Lat/Long for QTH
Anybody know a web site that I can the exact Lat. and Long. for my QTH ?? TKS, Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Ref: QTH Lat/Long
Many thanks Jack, TopoZone gave me the correct Lat/Long. The Lat/Long list in RAC, QRZ.COM, etc was not exactly correct. Needed it for W6EL Prop and my GeoClock Gray-Line Program. TKS AGN (WO's come through) :-) :-) Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
[DX-CHAT] Test Post
Testing spamblocker server. Sorry inconveience !!! Larry Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
