[Elecraft] Price reduction

[Richard Gilley]

Hi all,
Decided to reduce my asking price to $2600.00, including ship and 
Insurance, CONUS.  Same payment method.
Thank you
R Gilley
AD1G

Selling my KPA500 #3792 and KAT500 #2879.  Both units clean and in top 
condition, casual CW, no DATA or SSB, not used much due to antenna 
restrictions.  Includes interconnect cables for K3/K3S, power cables, KUSB 
interface, KPA500 power ca for 240 Vac. Prefer to sell as a unit, but open for 
discussion.
Asking $2900. Including shipping and insurance CONUS.  Payment via PayPal or 
certified check.

Contact via richgilley...@gmail.com 

Thank you
R Gilley
AD1G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA500 and KA500 for sale

[Richard Gilley]

Selling my KPA500 #3792 and KAT500 #2879.  Both units clean and in top 
condition, casual CW, no DATA or SSB, not used much due to antenna 
restrictions.  Includes interconnect cables for K3/K3S, power cables, KUSB 
interface, KPA500 power ca for 240 Vac. Prefer to sell as a unit, but open for 
discussion.
Asking $2900. Including shipping and insurance CONUS.  Payment via PayPal or 
certified check.

Contact via richgilley...@gmail.com 

Thank you
R Gilley
AD1G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] User's Dilemma

[Richard Corfield]

I thought ML serviced Elecraft in the UK. Sad that that's gone. My
experience with my KX3 was to send it to America. This was pre-Brexit, so...

It was sent to America for repair of a rotary encoder and addition of the
2m module back in 2019. This was a paperwork nightmare as I had to export
it as goods for repair, and it had to come back with the right paperwork to
connect it to my export in order that I don't pay import duties and taxes
on over £1000 worth of radio! I had to find the original receipt from the
original owner so that Elecraft on returning it could be sure to prove that
tax had been paid on the radio in the UK. The paperwork I filled in is
designed for goods export for sale, and I ended up writing on it in large
letters something like TEMPORARY EXPORT FOR REPAIR.

It came back I think without the 2m module installed (my emails to UPS are
about it having a significant part missing), though it looks like I may
have paid VAT on that (I can find a VAT bill for £85 which implies an item
cost of £425 which would be the repair, parts, 2m module and shipping

It was sent to repair in Italy for uniting with the 2m module and
calibration. We were in the EU at the time so this was easy. I imagine the
experience now we are out of the EU would be like the experience I had
sending to America.

In retrospect I've not used the 2m module that much. I'll have to get out
for more UKAC contests with it, but family is keeping me very busy at the
moment. I think the filter module would be a good purchase for my use of
the radio for CW.

The rotary encoder failed again, and I repaired it myself this time. It was
easier to risk my repair skills on a >£1000 radio than go through that
shipping/customs polava again. The original repair with Elecraft did allow
for the radio to be thoroughly checked over and any other needed updates to
be made, which was good.

 - Richard

On Fri, 15 Dec 2023 at 07:56, Doug Turnbull  wrote:

> Dear OMs,
>  The problem is that radio prices would almost certainly need to go up
> to give the dealer a margin after his/her own expenses.
>
>An independent service facility would be nice but is there adequate
> business in this?Not so sure we in EI could easily use a UK service
> facility.   I prefer to ship to California than Italy.  The cost of
> shipping to Italy may not be so wildly different than the cost of
> California freight.  Have a friend who lost a SPE 2K FA in shipping to Rome
> and received no compensation.
>
>  It is a problem for sure. I have always dealt directly with the
> factory and have been fortunate.A conundrum for sure.   Enjoy your
> Elecraft.   Be careful and pray.
>
> 73 Doug EI2CN
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S Split Operation

[Richard]

Thanks to the many helping hands out there this is what seems to work with no 
second receiver:

1. Lock VFO A on DX’s calling frequency

2. Tap A>B to copy DX’s frequency to VFO B

3. Tap DISP to see VFO B frequency below

4. Hold SPLIT to separate RX and TX

5. Tune VFO B “five-up” or as DX requests

6. Make stunning new DX contact

Thanks again one and all.

Cheers!

Richard Kunc
Secret Mountain Laboratory
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S Split Operation

[Richard]

OK, good idea.

1. I tune the DX station normally.
2. I tap A>B to copy A frequency to B.
3. I press and hold SPLIT to separate RX and TX.
4. While holding REV I tune about “five up” or wherever the DX is listening.
5. I release REV and I see the DX’s frequency again.

QUESTION: When I transmit there’s no visual indication on which frequency I’m 
transmitting. Should there be?

Cheers.
Richard
W4KBX


> On Nov 5, 2023, at 10:11 PM, Rich  wrote:
> 
> It is quite simple just long press the A>B button and you will be in SPLIT 
> mode.
> 
> Tell us what you are doing that is not working
> 
> Rich
> 
> PS - I believe Crossband Split is not possible w/o a SUBRX, but not within 
> the same band.
> 
> On 11/5/2023 21:59 PM, marvwhee...@nwlink.com wrote:
>> Richard:
>> 
>> It is not necessary to have the 2nd rcvr to work split. I have used my for 3 
>> yrs without a 2nd rcvr and work split frequently.]
>> 
>> Marv
>> KG7V
>> 
>> -Original Message-
>> From: elecraft-boun...@mailman.qth.net  On 
>> Behalf Of Richard
>> Sent: Sunday, November 5, 2023 6:12 PM
>> To: Elecraft Reflector 
>> Subject: [Elecraft] K3S Split Operation
>> 
>> I am having trouble understanding both the manual and N6FN’s Mini-manual 
>> when it comes to Split operation. I follow the “directions” over and over 
>> but nothing happens.
>> 
>> Does the fact that my K3S does not have a sub receiver mean that I can’t 
>> work split?
>> 
>> If I’m wrong about that I would really appreciate a step-by-step How-To 
>> lesson in working split.
>> 
>> Thanks.
>> 
>> Cheers,
>> Richard Kunc
>> W4KBX
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html Message 
>> delivered to marvwhee...@nwlink.com
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rwnewbo...@comcast.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to flat...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S Split Operation

[Richard]

I am having trouble understanding both the manual and N6FN’s Mini-manual when 
it comes to Split operation. I follow the “directions” over and over but 
nothing happens.

Does the fact that my K3S does not have a sub receiver mean that I can’t work 
split?

If I’m wrong about that I would really appreciate a step-by-step How-To lesson 
in working split.

Thanks.

Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] One More Time

[Richard]

Because I’ve seen several Q post here about the IC-7300 I’m going to try my 
question again.

Is there a simple way to enter “custom” frequencies in the Band Stacking 
Registers? For examples 14,000, 14,150, and 14,300.

I’ve scoured both manuals to no avail.

Thanks.

Richard Kunc
W4KBX
flat...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Headsets Again

[Richard]

What do we know about the Audio Technica ATH-GL3?

https://www.audio-technica.com/en-us/ath-gl3

Richard Kunc
flat...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Headset Hubbub

[Richard]

I ordered a Yamaha CM-500 from Amazon but it came through some other company 
after waiting eight days and there were problems.

1. The original factory packaging was gone.
2. It came wound in bubble wrap, then stuffed into a cardboard box that had 
been cut down from a larger box and taped together.
3. There was no manual.
4. The mic was dead.

I’m betting it was a DOA return item that was then sent out to me thinking I 
wouldn’t notice or I’d think returning it was too much trouble.

On top of that, they’ve been out of manufacture for quite some time so all that 
the stores have are the dregs.

So now I open again for other suggested headsets in the $100 range. The CM500 
was a gaming headset so that could be a source. This is going to be a gift for 
a friend who badly needs something.

Any more ideas?

Cheers.

Richard Kunc
W4KBX

flat...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] IC-7300 Question

[Richard]

Sometimes I run my K3s with a KPA500 and KAT500, other times I run an IC-7300 
with the “500 Twins.” Both work fine.

I have a nagging question about the 7300, though. If you have your 7300 pretty 
much figured out, please get in touch via my email address:

flat...@comcast.net

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Yamaha CM500 Headset

[Richard]

I just received my Yamaha CM500 headset and I have a question.

Can the mic boom be swiveled around counterclockwise so the mic can be on my 
right side?

Didn’t want to try before asking.

Please reply to my email address:

flat...@comcast.net

Many thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Birthday Suggestions

[Richard]

I have a very good friend who has done a million nice things for me over the 
years. He is currently making do with a Heil Pro-Micro one-sided headset that 
badly needs replacement. The black foam mic “wind arrester” has disintegrated 
and rains nasty black dust whenever you touch it.

He just purchased a nice Icom IC-7410, and he has a birthday coming up. I’d 
like to give him a good two-ear headset. Does the 7410 have a mic gain problem 
with regard to dynamic mics?

Regardless, I’d appreciate some first-hand experience suggestions for a good 
comfortable ragchew-friendly headset with a maximum price of $150. The only two 
sources I’d like to avoid are China and Heil. 

Looking forward to your ideas.

Cheers!

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft SSB Nets

[Richard]

I would like to know the callsigns and/or locations of the three SSB net 
controls for antenna aiming proposes.

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] A Good Headset For A K3

[Richard Thorne]

I've tried the following:

- Heil
- Yamaha CM-500
- RadioSport

Then I found the Inrad W1 http://vibroplex.com/contents/en-us/d9181.html

Hands down the best, in my opinion.  It's over the ears, doesn't clamp 
on, not heavy and is stout.


Rich - N5ZC

On 8/6/2023 11:37 AM, Eric Fitzgerald wrote:

Hello Elecrafters,

I've been struggling with a failing Kenwood MC-60 desk mic for portable 
operation and I would like recommendations for a good, robust headset 
that plugs into the front panel jack.


Thanks in advance for that,

73 Eric KG6MZS

PS; I tried to search the Mailman archives for this and couldn't find 
the search field.  Did it change recently?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rtho...@rthorne.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KAT 500 Antenna Selection Problems

[Richard Ferch]

I am using a KAT500 with an IC-7610, switching among three antennas. I have
similar problems, as follows:

On each band, I use only one of the antennas; on several bands there is
only one antenna with a reasonable match within the KAT500's capability. I
am relying on the KAT500's frequency sensing to switch antennas and tuner
settings, with the KAT500 in Manual mode.

When I switch between bands that use the same antenna, there seems to be no
problem. The KAT500 detects the new band with one or two transmitted dits
and switches tuner settings to match the remembered setting for the new
frequency.

When changing bands that involve an antenna change, to switch antennas I
have to transmit at least briefly, even if I only want to receive on the
new band. However, when I switch between bands that use different antennas,
some combinations do not seem to work, i.e. the KAT500 does not change
antennas or tuner settings when the transmitter transmits on the new band.
My workaround is to make two band changes in rapid succession. In some
cases I have to switch to another intermediary band that uses the same
antenna as the first band and transmit a dit or two on that band to cause
the KAT500 to switch to the intermediary band, followed by another switch
to the desired second band, while in other cases switching to an
intermediary band that uses the same antenna as the second band works,
followed by a second switch to the intended band.

What appears to me to be happening is that when the match between the
previous tuner settings and the new antenna on the new band is very poor,
the KAT500's frequency-sensing circuit sometimes seems to be unable to
determine the new frequency, and it doesn't switch antennas. Using a
different band as an intermediary, one where the match is not quite as bad,
appears to allow the KAT500 to detect the frequency correctly and make the
switch.

A better solution than my two band change workaround would be to write some
software to read UDP radio info messages from rig control software (in my
case, either N1MM+ or DXLab Suite Commander) and issue BN commands to the
KAT500 through its serial port connection. Regardless of whether the band
change was initiated from the software or from the radio's front panel,
this ought to cause the KAT500 to change antennas and tuner settings
without requiring any transmitting. I haven't tried this yet.

 73,
Rich VE3KI

W2ECK wrote:

In the KAT 500 Utility – Configuration- Antennas- Band- 17M;

 I have Antenna 3 checked as Enabled and Antenna 3 as Preferred. No other
antennas are selected for 17 m. This configuration has been  applied and
saved. Setup is Flex 6600, KAT500, KPA500 & win 10 pc.

The problem I am having is: with radio on 17 M, when I run a "tune"
sequence, the KAT does not switch to Ant 3, in fact it will not let me
manually switch to ant 3. I occasionally have the same issue with the tuner
not switching on other bands, to the selected antenna as set up in the
utility.

Any suggestions on what may be causing this ?


73 Paul

w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] WSJTX ON A MAC

[Richard Gilley]

Thank you all for the quick reply and suggestions.  Good work as all is well.

The CONFIG.PTT was set to other than OFF-OFF, made the change in settings 
ERR-PTT no longer an issue.

Following up on the Notes Guide and will make those changed also as I was 
getting the “Unable to creat shared memories ….” On a MAC M1.

Again thank you all for your kind replies.

R Gilley
AD1G

> On Jul 27, 2023, at 8:10 AM, Richard Ferch  wrote:
> 
> ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
> (or DTR-something), and something in the computer is activating RTS (or
> DTR) at the time the radio is powered up.
> 
> If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY
> to OFF-OFF (or OFF-DTR if you want to use DTR for CW keying), and in your
> radio control software (WSJT-X and any other programs you use for radio
> control) use CAT for PTT control.
> 
> 73,
> Rich VE3KI
> 
> AD1G wrote:
>> ...  I have receive and Tx ok but I also have  ERR PTT displayed. ...
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richgilley...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] WSJTX ON A MAC

[Richard Ferch]

ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
(or DTR-something), and something in the computer is activating RTS (or
DTR) at the time the radio is powered up.

If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY
to OFF-OFF (or OFF-DTR if you want to use DTR for CW keying), and in your
radio control software (WSJT-X and any other programs you use for radio
control) use CAT for PTT control.

73,
Rich VE3KI

AD1G wrote:
> ...  I have receive and Tx ok but I also have  ERR PTT displayed. ...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] WSJTX ON A MAC

[Richard Gilley]

Hi all,

I loaded WSJTX on a IMAC and ran into this issue on my K3:  I have receive and 
Tx ok but I also have  ERR PTT displayed.  Pressing any key does not clear this 
error and I have no access to power adjust as an example.  CAT does go green 
but still the error.
I have gone over my WSJTX settings and settings on the K3 as listed in the 
manual, and I think I have the audio set correctly in the MAC.

I can run WSJTX on a PC with the K3 without any issue.

I have a feeling that not many folks use Mac but it is what I would prefer to 
use.

Thank you all for reading about my problem and that there is solution.

Best regards
R Gilley
AD1G

   
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Is KX3 going obsolete

[Richard Isaacs via Elecraft]

Yes, and if business trends are true…short line, discontinuing products, not 
being able to keep up with new products, shortage of parts, that equals a 
perfect opportunity for a Chinese company to come in and buy them with a new 
name of ELECLAFT.

> On Jul 17, 2023, at 1:37 PM, Fred Jensen  wrote:
> 
> Things become obsolete when replacement parts and/or service are no longer 
> available.  It tends to happen suddenly, often accompanied by the release of 
> smoke.
> 
> 73,
> 
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
> 
> Stephen Dubin via Elecraft wrote on 7/17/2023 8:21 AM:
>>  I don't think an radio is obsolete unless/until it doesn't meet emission 
>> standards. I have IC735 that I still enjoy operating when I want a hit of 
>> QRO!
>> VY 73 de W3UECSteve DubinNight gathers and now my watch begins. It shall not 
>> end until I reach Top of the Honor Roll- W2IRT
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k6dg...@gmail.com
> 
> 
> 
> -- 
> This email has been checked for viruses by AVG antivirus software.
> www.avg.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to goldporsche...@aol.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Use of "delay" in K3 CAT Command Strings

[Richard Ferch]

First, you need to remember that the programmer's manual for the elecraft
radios does not tell you anything about the syntax of N1MM+ macro commands.
For that you need to consult the N1MM+ documentation.

Second, the ; at the end of each command is not punctuation, it is an
integral and necessary part of each radio command.

The commas in the description in the programmer's manual, on the other
hand, are just punctuation for the reader, to separate the actions the
reader must take. They are not part of the command sequence, and they are
not part of the N1MM+ command syntax either.

One thing you might try would be to use the \ separator in your N1MM+ macro
commands after the first SWTn; command, as in
{CAT1ASC MN032;SWT12;\MP005;SWT14;}
According to the N1MM+ documentation, that will cause the two groups of
radio commands before and after the \ to be sent to the radio in separate
polls, which might be enough separation in time to resolve the issue (no
guarantees, but the fact that it often works without a delay suggests that
you won't need much).

73,
Rich VE3KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3s Receive EQ

[Richard]

I love my K3s, warts and all, but I want a way to tailor incoming audio for 
better readability in special cases. Yes, I know about the built-in function, 
but that's hardly comfortable for quick, on-the-fly adjustments.

Can you recommend/suggest an outboard equalizer, ideally 8 bands, that can be 
used to tune the headphone audio only?

1. This unit would be entirely external to the K3s, so its output level would 
have to be sufficient to drive headphones. 

2. This unit would ideally be 9" by 9" maximum and 8" by 5" minimum, dictated 
by the available placement space in my station. There’s lots of wiggle room 
here.

3. 12 volts DC is available to power it.

4. An in/out (inline/bypassed) switch is essential.

Links to look at would be great.

Fingers crossed … VISA paid up and ready to rock and roll.

Cheers

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Using KIO3B for digital and AFSK RTTY

[Richard Ferch]

W0VTT wrote:

"You can also do radio control through the same USB port, but if you want
to do both at the same time you need a port sharing program like LP Bridge."

The second half of this sentence is incorrect. You can do radio control on
the USB port at the same time as you are using the USB audio codec in the
radio without the need for any port sharing program. The USB audio codec is
functionally independent of the COM port.

The need for a port sharing program like LP Bridge arises only when you are
using the same COM port from more than one program at a time. In contrast,
unlike the COM port which cannot be shared between programs, you can use
the audio codec from multiple programs simultaneously (e.g. multiple RTTY
decoders decoding the same audio signal in parallel).

73,
Rich VE3KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] P3 question

[Richard Hill]

I'm new to my recently set up, 10 year old, P3.  Not one of the hotshots
here, grin.

I see a green center line on my P3 at the moment with an additional green A
line and a magenta B line.  When I turn the big knob on the K3, both A and
B lines move away from the green center line as the new center of the view
changes.  The center line remains constant.

Is that what you are seeing?

Rich
NU6T

On Tue, May 2, 2023 at 2:08 PM ROBERT GARCEAU  wrote:

> I must have something set incorrectly.When I turn the VFO A knob MRK B
> moves as I turn the main knob.
> Bob, W1EQ
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
>


-- 
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KXV3A Install-Have not been able to seat pins in J66

[Richard Hill]

It worked. Thanks.

On Sat, Apr 29, 2023, 2:02 PM W3FPR  wrote:

> Rich,
>
> Try this -- bend the pins in just a little bit and try it that way.  You
> don't have to bend them very much and they will straighten out when you
> get the job done.
>
> 73,
> Don W3FPR
>
> On 4/25/2023 10:49 PM, Richard Hill wrote:
> >I'm installing a new but old KXV3A board into the J66 block.  The
> > instructions say the pins should just clear the top of J66 when the BNC
> > connectors are up against the top of the back panel opening.  I am not
> > seeing a way to orient the board such that the pins clear the block.  The
> > pins seem to be just a bit too long.  This board was purchased back in
> > 2011.  It is revision A.
> >
> > I'll call Elecraft in the morning, but thought I'd try the brain trust
> here
> > to see if I can complete this project tonight.  No hurry, grin.  It feels
> > like I should be able to do this, but I'm just not seeing it.  I'm
> tempted
> > to cut the ends of the pins about 1 mm, but will wait till I talk to
> > Elecraft.  I have an updated board on order, but thought I'd just put the
> > old board in and see if I can get my P3 running.
> >
> > Thanks for any thoughts!
> >
> >
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KXV3A Install-Have not been able to seat pins in J66

[Richard Hill]

  I'm installing a new but old KXV3A board into the J66 block.  The
instructions say the pins should just clear the top of J66 when the BNC
connectors are up against the top of the back panel opening.  I am not
seeing a way to orient the board such that the pins clear the block.  The
pins seem to be just a bit too long.  This board was purchased back in
2011.  It is revision A.

I'll call Elecraft in the morning, but thought I'd try the brain trust here
to see if I can complete this project tonight.  No hurry, grin.  It feels
like I should be able to do this, but I'm just not seeing it.  I'm tempted
to cut the ends of the pins about 1 mm, but will wait till I talk to
Elecraft.  I have an updated board on order, but thought I'd just put the
old board in and see if I can get my P3 running.

Thanks for any thoughts!

(This is a second post, it seemed the first did not go through).

73

Rich
NU6T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S Line in not working.

[Richard Ferch]

A potential explanation: the LINE IN level may have defaulted to zero.

The LINE IN level is adjusted using the MIC gain control, but only when MIC
SEL is set to LINE. So, you need to set MIC SEL to LINE (which turns
MIC+LIN off), adjust the MIC gain control to give the desired non-zero LINE
IN level reading, then if you really want to use MIC+LIN on, set MIC SEL
back to your chosen mic setting and set MIC+LIN to ON.

For FT8, it would make more sense to set MIC+LIN to OFF and MIC SEL to
LINE. The MIC SEL and MIC+LIN settings are remembered separately in SSB and
DATA modes, so by using DATA A mode for FT8 you can avoid the need to
change settings back and forth as you change operating modes.

73,
Rich VE3KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 & K3S Options Last Time Buy Update (12/02/2022)

[Richard Hill]

I also received my KSYNAUPGD_KSYN3A board kit and my KIO3BUPKT_KIO3B board
kit.
I still have a KXV3 upgrade kit on order.

Rich
NU6T

On Fri, Apr 14, 2023 at 7:35 AM Steve Zabarnick  wrote:

> After just about two years from my original order, I finally received the
> upgraded K3 synthesis board (KSYN3AUPGD). Installation will take place this
> weekend and I'm hoping for the best.
>
> Steve N9SZ
>
>
> On Thu, Feb 2, 2023 at 9:47 AM Steve Zabarnick 
> wrote:
>
> > It has been over 8 weeks since Eric announced that most of the long
> > delayed K3 options would be available in 6 to 8 weeks, and "should ship
> > close to these dates ranges if there are no new
> > parts issues or surprise manufacturing delays."
> >
> > I have been patiently waiting for the upgraded synthesizer for my K3 and
> > made a 50% payment two years ago.
> >
> > Any update on this? It would be nice to have some info on whether these
> > upgrades are being delayed once again or about to ship as promised.
> >
> > Steve N9SZ
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com



-- 
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Way Off Topic — Sorry

[Richard]

Are you familiar with general hospital protocol with regard to patient 
discharge procedure?

If you can help, please email me at my home address in the Cc line above.

flat...@comcast.net <mailto:flat...@comcast.net>

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3, KAT500, KPA500 stacking

[Richard Hill]

I've read in the manuals that the KPA500 can be stacked on top of the
KAT500.  I understand that the KPA500 needs about 2 inches clearance above
the amp to keep it cool in high demand situations like contesting.

I'm not finding anything about stacking the power combo (KAT500 + KPA500)
on top of the K3.  I was looking for:

1.  any cautions about clearance above the K3 and
2.  whether the K3 is happy with a power combo sitting on top of it.

What practical advice is out there?

Thanks.
NU6T
-- 
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Mysterious T

[Richard]

On my K3S screen, near the lower right-hand corner there’s a capital T all by 
itself. 

It only shows up when in CW mode. I can’t  find any reference to it in the 
manual, and I’d like to understand it.

What can you tell me about it?

I can email you a picture if it might help. Use my home address.

Cheers!

Richard Kunc
W4KBX

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] 20-meter Net Control

[Richard]

Who will be net control today on 20 meters?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] MH3 Mic recieved

[Richard Hill]

Will do, thanks! No worry here, Wayne.  Will be able to give it a try
tomorrow.

Rich
NU6T

On Thu, Jan 26, 2023, 1:23 PM Wayne Burdick  wrote:

> Hi Richard,
>
> Again, apologies to you and others for the long delay. Our supplier had
> their own supply chain problems, thanks to the pandemic, and they had to go
> through two sets of prototypes to get everything dialed in.
>
> Let us know how the mic works.
>
> 73,
> Wayne
> N6KR
>
>
>
> > On Jan 26, 2023, at 11:19 AM, Richard Hill  wrote:
> >
> > FYI: My long ago ordered MH3 mic arrived today. Feels good, but I have
> not
> > used it yet.
> >
> > Thought some would like to know that they are shipping.
> >
> > Rich
> > NU6T
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] MH3 Mic recieved

[Richard Hill]

FYI: My long ago ordered MH3 mic arrived today. Feels good, but I have not
used it yet.

Thought some would like to know that they are shipping.

Rich
NU6T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA1500 For Sale

[Richard Cash]

The KPA1500 has been sold. Thanks
Rich W4WU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA1500 For Sale

[Richard Cash]

I have a KPA1500 in excellent condition for sale $5500 and I’ll split shipping. 
It’s just back from Elecraft for updates and upgrades with new finals. Operator 
error, no fault of amp. Looks like new and performs to specs per Elecraft tech. 
I have several photos for serious buyers. Non-smoking home and shack. Light 
use, no contesting, etc. 
Thanks and 73.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Power to the Tuner

[Richard]

I normally run a K3S, a KPA500, and a KAT500, and the combination is dynamite.

Recently, I bought an IC-7300 as a backup radio, and I’ve been busy integrating 
it into my station in such way that makes it quick and easy to switch from the 
K3S to the 7300. Related to that integration I have a question about powering 
the KAT500.

Normally, the KAT500 takes its DC power from the K3S. The easiest way to power 
the KAT500 when using it with the 7300 is the have to K3S powered up but not 
connected to any of the antennas. All of its other radio-to-tuner cables remain 
connected as usual.

Is there any way this arrangement can hurt either radio, especially the K3S? 
It’s already been back to the factory once.

If that’s safe for the radios, my IC-7300/KAT500 setup tuner power options are:

Continue powering the tuner from the K3S. —— My choice.
Temporarily unplug the K3S DC power cable from the KAT500 and plug in a 
separate 12-volt supply. This semi-acrobatic feat, performed by touch alone, 
must be done every time I switch either way.

I’d prefer to let the K3S power the tuner, but is that safe?

Cheers!

Richard Kunc
W4KBX

flat...@comcast.net <mailto:flat...@comcast.net>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Power to the Tuner

[Richard]

I normally run a K3S, a KPA500, and a KAT500, and the combination is dynamite.

Recently, I bought an IC-7300 as a backup radio, and I’ve been busy integrating 
it into my station in such way that makes it quick and easy to switch from the 
K3S to the 7300. Related to that integration I have a question about powering 
the KAT500.

Normally, the KAT500 takes its DC power from the K3S. The easiest way to power 
the KAT500 when using it with the 7300 is the have to K3S powered up but not 
connected to any of the antennas. All of its other radio-to-tuner cables remain 
connected as usual.

Is there any way this arrangement can hurt either radio, especially the K3S? 
It’s already been back to the factory once.

If that’s safe for the radios, my IC-7300/KAT500 setup tuner power options are:

Continue powering the tuner from the K3S. —— My choice.
Temporarily unplug the K3S DC power cable from the KAT500 and plug in a 
separate 12-volt supply. This semi-acrobatic feat, performed by touch alone, 
must be done every time I switch either way.

I’d prefer to let the K3S power the tuner, but is that safe?

Cheers!

Richard Kunc
W4KBX

flat...@comcast.net <mailto:flat...@comcast.net>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Looking for a KPA500

[Richard]

Does anyone have a KPA500 for sale?

Please respond to flat...@comcast.net <mailto:flat...@comcast.net>

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft SSB Nets

[Richard]

Please, I would like to know the callsigns and locations of the three SSB net 
controls for antenna aiming proposes.

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft SSB Nets

[Richard]

I would like to know the callsigns and locations of the three SSB net controls 
for antenna aiming proposes.

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Hello?

[Richard]

Where’s the 40-meter SSB net today?

Do I have the time wrong? 3pm EST Sunday at 7280?

Where can I get a schedule of all the SSB nets? Tried the website and Google —— 
nothing.

Cheers!

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Internal 2-meter Transverter

[Richard]

Do you have K144XV internal transverter and K144RFLK RF lock boards you would 
sell? I am very interested.

Also, if you have PDFs of the installation and/or user manuals for them, please 
email them to me at my home address:

flat...@comcast.net <mailto:flat...@comcast.net>

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Two-meter Radio Needed

[Richard]

I have and enjoy the Elecraft “500 Family” (K3S, KPA500, KAT500) immensely. 
However, for 2 meters I’ve been depending upon a 20-year-old Icom IC-706MkIIG 
that’s already had some surgery. Lately, it’s been hinting at retirement, so I 
need to find a replacement.

If you have available either of these, please let me know.

Icom IC-7100
Ten-Tec 526 “6N2” 
Anything similar. I’m open to suggestion.

Please use my home email:   flat...@comcast.net <mailto:flat...@comcst.net>

Thanks.

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Good Natured Contesting Advice

[Richard Hill]

OK, here is a bit of view from the little pistol side.  I made 135 contacts
from a low EFHW antenna and 99W.  I'm not loud.  I'm a CW novice.  I hear
OK and send OK at 23 wpm.  I practice and can hear simple exchanges up to
about 30 wpm.  I struggle with callsigns and complex words and phrases.  I
search and pounce by listening 2, 3, 4 or more times till I'm confident I
have an exchange.  Then I let N1MM+ and WinKey USB send my call and when
appropriate send my exchange.  I had a number of loud strong stations call
over me, some while I sent my exchange, and some running ops abandoned me
and took the loud station.  OK. Wipe that one.  Try again here or
elsewhere, turn the big knob.  Part of the game.  9⁸

Sometimes I was asked for a repeat with a question mark.  I sent all
again.  Sometimes I heard noise or QRM/QRN and nothing specific and so I
sent my entire exchange.  If I hear a specific item, I sent that by hand.
When I screwed up my hand sending I let N1MM+ send (not necessary often).

One loud op sent "Dupe" so I checked and I had nothing similar in N1MM+.  I
moved on, but the next time I searched that band I got another DUPE.  I
sent NIL and got DUPE.  We did that 2 or more times as I rotated through
the bands until I memorized his call.  The advice I hear in my clubs and
here is work first worry later.  But dupe checking works both ways, NIL
means not in log and for whatever reason no dupe and he maùy lose penalty
points and likely saved little time.

None of this is an excuse to play in a big contest when you are not ready
to play reasonably well.  A contester's goal is to send and recieve as
accurately and quickly as possible to accumulate the most points possible,
understanding that too fast is slow, and too slow is not winning.

I listened to a straight key op sending CQ SS at some 10 wpm high in the
band on Saturday.  I chose not to call because I'm terrible at slow code
and it would not have been fun.  If it had been later on Sunday I might
have called.  I wondered how many takers the op got?  SS CW does not seem a
good place for slow straight key, but it may have been an older op with a
30s-40s check.  Dunno.  Nothing wrong for trying, but expectations should
be low.

Nu6t
Rich





On Thu, Nov 10, 2022, 3:28 AM Nate Bargmann  wrote:

> * On 2022 09 Nov 22:20 -0600, Jim Brown wrote:
> > When answering a CQ, send ONLY your call, and never repeat anything that
> the
> > other station copied correctly. For example, if he sent your call
> correctly
> > when he responded to you, don't repeat your call when sending your
> exchange.
> > And when you're the caller, never send the other station's call unless
> > there's confusion about who's working who. :) As Bob, K6XX, says when
> he's
> > teaching new contesters, "I know MY call, the only one I need is YOURS!
>
> I have a couple of thoughts on this advice, Jim.
>
> First, I agree wholeheartedly about ONLY sending your call.  Field Day
> is one of the most frustrating events as it is rife with bad
> habits--pretty much limited to phone.  I have tried to train others not
> to do those bad habits and guess what, apparently it is too difficult to
> accept being different (I've been different all my life so I am
> comfortable here) and they do all the bad habit things they're hearing.
> The last couple of times I just gave up and stuck to the CW band!
>
> We had one op that always would send the exchange whenever the other
> station had only asked for a repeat of our call.  I tried and tried to
> get him to stop doing that as it just made the QSO much longer than
> necessary as the flow of the exchanges got all goofed up.  In his mind
> this was apparently proper procedure...
>
> However, I would caution against the answering station NEVER sending his
> call again as it is a requirement for a complete SS exchange.  Yes, over
> the years I copied a lot of ops that only sent #, Prec, Check, Section
> and omitted their call which in retrospect I should have probably
> rejected.  But the rules state the call is to be sent between the Prec
> and Check (years back I recall a software author from outside the US
> stating that the call in the exchange was redundant and when it was
> pointed out that the SS rules state it is required as part of the
> exchange his retort was that the rules were wrong!)
>
> 73, Nate, N0NB
>
> --
> "The optimist proclaims that we live in the best of all
> possible worlds.  The pessimist fears this is true."
> Web: https://www.n0nb.us
> Projects: https://github.com/N0NB
> GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
>

Re: [Elecraft] QRP and Contesting

[Richard Hill]

The point of the SST and MST contests is to provide newer cw ops with a
contest training environment where the exchange is simple and new ops can
practice sending and receiving and other basic operations like dupe
checking in a friendly and mostly unhurried environment.  Diving into SS CW
when you are not prepared and then calling a good op who is capable of over
1000 contacts elitist seems a bit childish, like a driver with a new
license calling Indy 500 drivers elitist.

Rich
NU6T

On Tue, Nov 8, 2022 at 3:53 PM Edward Tanton  wrote:

> I am also in the 'by hand' group. I greatly enjoy the "process": a paper
> dupe sheet, picking the next QSO, and entering the log information. For
> various reasons I MAY partially fill out a QSL card. No, you don't win
> categories, but my head & heart love itSent from my T-Mobile 4G LTE Device
>  Original message From: Wayne Burdick 
> Date: 11/8/22  6:41 PM  (GMT-05:00) To: Andrew Moore <
> andrew.n...@gmail.com> Cc: Elecraft Reflector 
> Subject: Re: [Elecraft] QRP and Contesting Andrew Moore <
> andrew.n...@gmail.com> wrote:> For many of us...the joy of contesting> is
> keying by hand and taking notes on paper...I'm in this group. Casual
> contest operation, usually QRP, mostly CW, and almost always logging by
> hand.I greatly appreciate all of the very serious ops out there who
> approach this with a high level of skill and give everyone -- regardless of
> ability -- that next QSO.WayneN6KR(Disclaimer: I'm not in the "still
> learning CW" camp
> :)__Elecraft
> mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp:
> http://mailman.qth.net/mmfaq.htmPost: mailto:elecr...@mailman.qth.netThis
> list hosted by: http://www.qsl.netPlease help support this email li
>  st: http://www.qsl.net/donate.htmlMessage delivered to n...@comcast.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
>


-- 
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Y-Box For Sale

[Richard Lawn]

I no longer have an Elecraft radio so this Y-Box by N6TV is no longer of
any use. I also have a couple of cables for it. It was set up for me to
config. TX INH to HI=inh GND TX OK to allow RF output. I used it for EME
operation. I have the original configuration diagram by N6TV and I believe
he would return it to the normal wiring state for the cost of postage.

https://www.kkn.net/~n6tv/Y-BOX/

I'm asking $100 shipped anywhere in US.

73
Rick, W2JAZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S Noise Reduction

[Richard]

Thanks to all who chimed in about this. I will be trying everyone’s advice.

I still think it’s sad that all I have to do to significantly block noise in 
SSB on my old IC-706MkIIG and my IC-7300 is touch one button: most of the noise 
is gone and the level of the audio itself hasn’t dropped so you could notice.

I’d told this shortcoming as been addressed and corrected in the K4.

Cheers,

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S Noise Reduction

[Richard]

Is there ANY way to make the NR feature work worth a damn? In general, when I 
turn it on, the audio level drops to almost nothing, and none of the Adjustment 
setting do much of anything.

My other two radios, an old Icom and a new Icom, both have very effective NR 
features.

Is this a design heartbreak, or is my radio looking at ANOTHER trip to the 
factory?

Firmware # UC 05.67

Cheers.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] VFO Tuning Choices

[Richard]

Never mind!  I found it in the manual after all. The Adobe Reader “Find” box 
doesn’t recognize all caps. 

> On Nov 5, 2022, at 3:40 AM, Richard  wrote:
> 
> What’s the functional difference between  FINE/COARSE and RATE? The 
> difference between FINE and COARSE is obvious, but how do they differ from 
> RATE? When do you use which, and how? Couldn’t find even a mention in the 
> manual.
> 
> Richard Kunc
> W4KBX
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to flat...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] VFO Tuning Choices

[Richard]

What’s the functional difference between  FINE/COARSE and RATE? The difference 
between FINE and COARSE is obvious, but how do they differ from RATE? When do 
you use which, and how? Couldn’t find even a mention in the manual.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Recommendation for Microphone for K3s?

[Richard Thorne]

I would recommend this, headset wise. 
http://www.vibroplex.com/contents/en-us/d9181.html


Much better construction than the CM-500 and the Heil Pro Set in my 
opinion.  It does not clamp your head like a RadioSport.


I've tried them all and the W1 is my recommendation.

Rich - N5ZC

On 11/2/2022 12:23 PM, Wes wrote:
My birthday was last week and my lady asked me whether there was any ham 
gear I would like.  Since it would be a little pain using the new CM500 
I bought earlier, with my Kenwood radios, I looked at the RadioSport.


I'm afraid they are simply too expensive, even if someone else is 
paying.  Over 100 bucks for a cable... I don't think so.  I'll adapt the 
CM500.


Wes  N7WS


On 11/2/2022 9:34 AM, Lou Laderman via Elecraft wrote:
I’ve read a lot of comments about Heil and the Yamaha boomset. Nobody 
has yet suggested RadioSport boomsets (Arlan Communications, 
http://www.arlancommunications.com/products/amateurradio/radiosport/rs60cf.asp). I have several pairs. Although definitely on the high end of the market, they are superbly built and extremely comfortable, with both dynamic and electret condenser mic options. Some complain they’re too heavy, but I find them to be great for me.


73, Lou

Lou Laderman W0FK



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rtho...@rthorne.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Fuse Data?

[Richard]

For a K3S, what should the current rating be of the in-line DC power cord fuses?

Has anyone come up with in-line DC power cord circuit breakers?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA1500 Amplifiers are now shipping from Stock

[Richard Hill]

I understood that ordered microphone parts were substandard when delivered
and new parts had to be sourced, delaying production.

Would you have preferred they delayed shipping the shack in a box until the
mics were available?

NU6T

On Fri, Oct 7, 2022, 12:12 PM David Gilbert  wrote:

>
> I believe his point includes the lack of any communication updates. I've
> suggested before that a single clerk could post regular updates here on
> any backorder situations.  Even if they just stated the same thing,
> people would know where they stood instead of wondering if they had
> simply been forgotten (as some folks actually have been).
>
> Other companies I've been associated with and have worked for understand
> this much better.
>
> Dave   AB7E
>
>
>
> On 10/7/2022 11:46 AM, Jim Brown wrote:
> > The missed point here is that the ability to buy parts to build stuff
> > has been ongoing for more than three years!
> >
> > 73, Jim K9YC
> >
> > On 10/7/2022 11:36 AM, Mike Smith VE9AA wrote:
> >> You may be missing the point.  Some of us have ordered and already
> >> paid for
> >> the KX2-shack-in-a-box which*INCLUDES*  an MH3 microphone.
> >>
> >> In my case, in a month or so it'll be about 1 year since I've paid
> >> for this.
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ab7e...@gmail.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] AX-1 -- with and without counterpoise

[Richard Hill]

One could also consider, "HF Vertical Performance-Test Methods and Results"
by N0AX and K7LXC, 2000.  Available from Champion Radio Products or DX
Engineering.

They set this up as a reasonably reproducible test method to allow at least
somewhat comparable results accepting the inevitable variations from
location to location.

Setting up tests that include one or more of their test antennas and one or
more of the HF Pack antennas and various configurations of AX1 and AX2
antenna systems could result in comparisons that reflect some standard for
comparison and some level of relative understanding.

Especially if done on that standard pedestrian mobile test track.  Hi.

NU6T


On Sun, Sep 25, 2022, 2:38 PM SCOTT MCDONALD via Elecraft <
elecraft@mailman.qth.net> wrote:

> Dave, if you’d like to see a reasonably controlled test of radiators, you
> might want to take a look at the 2002 HF Pack Vertical Antenna Shootout
> Results.  The antennas range from full size to a resistor with a short whip.
>
> https://www.qsl.net/hfpack/antennas/shootoutvertical2002.html#vertical
>
> For sure, the counterpoise was a resonant horizontal quarter wave, not a
> drag wire, and not counterpoiseless (sic), but the results were otherwise
> controlled nicely for direction using quality gear by people fairly
> knowledgeable about portable and pedestrian mobile ops.  If you look at the
> numbers you can even (kinda) infer the radiation resistance goes up with
> the square of the radiator length thing, as one would expect.
>
> And while there is no AX-1 tested, there is one antenna very much like it
> in the mix, about the same length, same dimension loading coil, etc. (not
> judging here Wayne, feel free to rebut).  And it’s about 5dB down from a
> full size quarter wave under controlled conditions, not a surprising result.
>
> About the only thing missing seems to be some practical use data (per
> Julia) comparing a drag wire counterpoise as actually used in the field
> with the Shootout’s single horizontal counterpoise, if someone hasn’t
> already done that. Given the interest at the time  I’d guess that answer
> might exist in HF Pack lore too - maybe someone here knows?
>
> Scott ka9p
>
> Make something good happen!
>
> > On Sep 25, 2022, at 3:26 PM, David Gilbert  wrote:
> >
> > 
> >
> > Personally, I only care about a pure comparison test in as controlled
> circumstances as possible.  Any practical test like you describe will have
> so many variables that it won't be useful for anything other than as an
> anecdote.  "Ground" is going to be wildly different depending upon
> location.  Propagation is highly variable for distant reports, and if you
> instead use a nearby setup for reception, it will make a difference which
> direction is it relative to the trailing counterpoise.
> >
> > Besides, lots of people have already proven they can make contacts with
> the scenario you describe, but nobody has a clue how efficient that might
> be or not be.
> >
> > 73,
> > Dave   AB7E
> >
> >
> >
> >> On 9/25/2022 12:30 PM, Julia Tuttle wrote:
> >> Hi Dave,
> >>
> >> I think that's a proper comparison in a physics sense, but I don't
> think it fully represents how the AX1 is deployed in practice.
> >>
> >> I would run both an ideal scenario -- the one you described -- amd a
> practical scenario -- something like a KX3 + internal batteries on a picnic
> table, AX1 on the bipod, and the counterpoise trailing down to and across
> the ground.
> >>
> >> 73,
> >>
> >> Julie
> >>
> >> On Sun, Sep 25, 2022, 15:19 David Gilbert  wrote:
> >>
> >>
> >>To be a proper comparison, the AX1 needs to be out it the clear away
> >>from anything else, preferable at a height that allows the
> >>counterpoise
> >>to be hanging straight down with the end maybe a foot or two off the
> >>ground.  Measurements should be with the AX1 at the same height above
> >>the ground without and without the counterpoise. Ideally a KX2 or
> >>similar rig should used, be battery powered (with very short leads if
> >>external), no coax, and no body contact to the source of RF.  Signal
> >>reports should be in microvolts ... the number of contacts isn't
> >>really
> >>useful and neither is SNR if the readings are taken over a lengthy
> >>period of time.
> >>
> >>If I can get my hands on an AX1, I plan to either climb a tree or
> >>set up
> >>a tall fiberglass step ladder for the AX1 as far away line of
> >>sight from
> >>my home as practical.  I'd use my KX2 for the signal source, using
> >>the
> >>Tune function to put out RF without touching the KX2. Near my home
> >>I'd
> >>set up the portable vertical antenna I described in an earlier
> >>post, and
> >>feed that to my K3 set to read microvolts.  I'd operate the AX1 (with
> >>and without counterpoise wire) and any other antenna for
> >>comparison, and
> >>have a friend record the microvolts from the K3 as a blind test.
> >>

Re: [Elecraft] AX-1 -- with and without counterpoise

[Richard Hill]

It would be interesting to see the results of a fully double blind
scientifically reproducible test done with traceable engineering quality
test equipment on a closed pedestrian mobile track.

NU6T

On Sun, Sep 25, 2022, 12:19 PM David Gilbert  wrote:

>
> To be a proper comparison, the AX1 needs to be out it the clear away
> from anything else, preferable at a height that allows the counterpoise
> to be hanging straight down with the end maybe a foot or two off the
> ground.  Measurements should be with the AX1 at the same height above
> the ground without and without the counterpoise. Ideally a KX2 or
> similar rig should used, be battery powered (with very short leads if
> external), no coax, and no body contact to the source of RF.  Signal
> reports should be in microvolts ... the number of contacts isn't really
> useful and neither is SNR if the readings are taken over a lengthy
> period of time.
>
> If I can get my hands on an AX1, I plan to either climb a tree or set up
> a tall fiberglass step ladder for the AX1 as far away line of sight from
> my home as practical.  I'd use my KX2 for the signal source, using the
> Tune function to put out RF without touching the KX2.  Near my home I'd
> set up the portable vertical antenna I described in an earlier post, and
> feed that to my K3 set to read microvolts.  I'd operate the AX1 (with
> and without counterpoise wire) and any other antenna for comparison, and
> have a friend record the microvolts from the K3 as a blind test.
>
> I would use the tuner in the KX2 to simulate actual use, but that would
> of course introduce a variable for possibly different amounts of loss in
> the tuner depending upon the load.  I don't see a good way to avoid that.
>
> 73,
> Dave   AB7E
>
>
>
> On 9/25/2022 7:06 AM, Ron Gruner wrote:
> > I've just run two tests of my WSPR/AX-1 set-up with and without a
> > counterpoise. Each test ran 24 hours over the last couple of days. Here
> are
> > the results:
> >
> >  COUNTERPOISE?
> >YES   NO
> >---  ---
> > Total Contacts152  129
> > Maximum Distance (km)  15,720   17,276
> > Median Distance 2,1371,823
> > Median SpotQ  446  398
> >
> > Where SpotQ = Kilometers / [(2 Watts x (SNR in DB + 36))/36) ]
> >
> > The WSPR circuit's ground and SMA connectors are apparently providing
> > enough of a counterpoise to propagate a respectable signal.
> >
> > Here's a close-up of the rig with no counterpoise:
> > https://gruner.com/k4rhg/wspr_ax-1_nocounterpoise.png
> >
> > 73,
> > Ron Gruner
> > K4RHG
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ab7e...@gmail.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3+ For Sale

[Richard Lawn]

I have a K3+ (serial # 593) in excellent condition for sale with a number
of the upgrades including the following:
KXV3B-F
KBPF3A
KFL3B-FM-IR-F
KTCX03-l-F
KI03BUPKT-F
About the only thing not upgraded was the synthesizer.
This is the 100 watt version and it has the auto tuner. It's in excellent
shape and was tweaked at the factory in 2017.
Also includes manuals, original mic, and an LP-Pan2 if desired. The only
thing I don't seem to have is the original box.
$1500 shipped to anywhere in continental US
$1650 with the LP-Pan2
Photos available on request.
I will accept a bank check, personal check (with time to clear) and paypal
with the 3% added to the sale price.
73
Rick, W2JAZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Systematic error in spots as heard by K3

[Richard Ferch]

k3wyc said:

> ... The spotted frequency should be the suppressed carrier frequency ...

I don't think so. Most modern CW rigs that I am aware of, including the K3,
display the actual transmitted frequency on the dial, not the SSB
suppressed carrier frequency.

That is why the spotted frequency should not depend on the choice of
sidetone if the rig is tuned to the signal correctly. If the displayed
frequency on the dial was the suppressed carrier frequency, then spotted
frequencies would depend on the sidetone, but that is fortunately not the
case with most modern radios. The microprocessor in the radio takes care of
the offset calculation.

If someone has a rig without adjustable sidetone and they prefer to listen
to a different tone than their rig's sidetone, they need to be aware that
when they listen this way they will be transmitting on a different
frequency than the signal they are receiving, and also that frequencies
they spot will be incorrect.

If spots seem to be consistently to one side or the other of your sidetone,
though, my first thought would be that there could be a frequency
calibration error in your rig. An easy way to check would be to tune to the
WWV carrier with the rig in CW mode. With the dial on exactly 10.000 MHz,
the carrier tone you hear in the receiver should be the same as your
sidetone. In SSB, on the other hand, the WWV carrier should not be audible
(it should be at 0 Hz) with the dial on exactly 10.000 MHz.

73,
Rich VE3KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Off-topic Request

[Richard]

If you might be able to help me with a reel to reel tape recorder that recently 
quit, please get in touch via my home e-mail.

Thanks.

Richard Kunc
W4KBX
Elecrafter since 2017.

flat...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Directional Coupler

[Richard Lim via Elecraft]

Hi folks, I recently acquired a P3 with the Sensor module Rev B board and am 
looking for a directional coupler 0-200w. Does anyone have one that they are 
willing to part with? Please email me directly KQ9L.QRP  gmail com. 
Thank you.
Rich
KQ9L

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Electricity

[Richard]

Is or was anyone here an actual working electrician? If yes, then I have a 
question for you that should be dealt with off the reflector. Please holler via 
my e-mail address if you think you might be able to help.

Thanks, and Cheers!

Richard Kunc
W4KBX
flat...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [OT] Note from a skeptic

[Richard Hill]

There is a good chance your battery came with, or should have, advice to
charge the battery every six months or less to keep it alive.

I know we hate to read instructions...but in this case it is an expensive
avoidance.

Had my education.

Nu6t

On Wed, Jun 29, 2022, 1:15 PM Drew AF2Z  wrote:

> Batteries have their place but in general I hate the things. Anyone who
> has had to maintain a battery systems does. Now I have them scattered
> all around the house in various states of charge or dying...
>
> Oh sure, they're great for one or two portable devices that you use
> frequently. But here I am again, back in the battery maintenance role
> and not even getting paid for it... Yeah, in general I hate batteries.
> Having a battery-based energy distribution system is just plain nuts.
>
> 73,
> Drew
> AF2Z
>
>
>
> On 06/29/22 14:57, Al Lorona wrote:
> > Late last week, I pulled my two-year-old LiFePO4 battery out for Field
> Day prep and found that it had failed. Efforts to reset the battery
> management system didn't succeed. I got to use this battery on exactly two
> Field Days, which means it cost me almost $200 per Field Day! Sad, very,
> very sad.
> >
> > The dealer is honoring the warranty and a new battery is on the way, but
> I've become a LiFePO4 skeptic. I don't care for battery management system
> electronics that can fail where I can't get to them: sealed up inside the
> battery case.
> >
> > If stuff like this starts happening to everybody's electric car... oh
> boy, look out!
> >
> >
> > Al  W6LX/4
> >
> >
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to pu...@af2z.net
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA500 For Sale

[Richard Cash]

I have a KPA500 for sale in like new condition. $1900 shipped in CONUS. Zelle 
for payment or pick up with cash. Photos available.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Logging Education

[Richard]

To all those who responded (or my still respond) to my inquiry about Mac 
logging software — thanks. Very helpful stuff.

Cheers!
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Mac Logging Software

[Richard]

I’m looking for a simple basic logging program for the Mac, preferably one that 
I can tailor to my needs, one that would be good for SSB contacts.

Any recommendations?

Thanks.

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] CW, Here I come!

[Richard]

For code practice, I tried plugging a straight key into the “KEY” jack on the 
back of my K3s. I hear a tone when I operate the straight key but the volume is 
low and I can’t change the tone.

How about some sequential help on this?

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Antenna Quandary

[Richard Eversole]

Wa

Half wave




On Wed, May 11, 2022, 20:09 Hank via Elecraft 
wrote:

> I wish I knew as much about half wave dipoles as I think I do.
>
> Hank
> K4HYJ
>
> > On May 11, 2022, at 10:52 PM, Edward Mccann  wrote:
> >
> > Concur.
> >
> > Slack reasonable cut.
> >
> > No dumb questions, just dumb answers, from time to time.
> >
> > But I’m amazed at the restraint shown by many who are avoiding the tithe
> of arms-appointed expert, especially when we have a passel of Big Swinging
> Dudes on the line.
> >
> > The query might have been a bit more foucssed, or tailored to the K
> line. But maybe Santa Cruz has a proprietary dipole in the back room I
> missed.
> >
> > 73,
> >
> > Ed McCann
> > AG6CX
> >
> > Sent from my iPhone
> >
> > On May 11, 2022, at 7:37 PM, Gwen Patton  wrote:
> >
> > *"On the other hand, cutting the guy some slack is ok too. This is a
> tough
> > room but the only dumb question is the one you don’t ask."*
> >
> > I dunno... "Is the Pink Panther a lion" is up there in essential
> dumbitude.
> >
> > https://youtu.be/J0UVlPmhY0A
> >
> > 73,
> > Gwen, NG3P
> >
> >> On Wed, May 11, 2022, 10:20 PM Lou Laderman via Elecraft <
> >> elecraft@mailman.qth.net> wrote:
> >>
> >> On the other hand, cutting the guy some slack is ok too. This is a tough
> >> room but the only dumb question is the one you don’t ask.
> >>
> >> 73, Lou W0FK
> >>
> >> Lou Laderman
> >> Sent from my mobile device
> >>
> >> On May 11, 2022, at 9:09 PM, Edward Mccann  wrote:
> >>
> >> Entirely possible this is a late April Fool’s query, or a freshman
> >> fraternity prank designed to bring out the blowhards who will profess
> >> knowledge of most things.
> >>
> >> When and if the  query is expanded to source commentary from those
> >> “super-well versed” in the behavior of the OCFD,  from under the rock
> will
> >> come more than you ever bargained for.
> >>
> >> 73,
> >>
> >> Ed McCann
> >> AG6CX
> >>
> >> Sent from my iPhone
> >>
> >> On May 11, 2022, at 6:39 PM, Andy Durbin  wrote:
> >>
> >> "Anybody out there super-well versed in the behavior of the half-wave
> >> dipole?"
> >>
> >> There are only two possible answers:
> >>
> >> Yes
> >> No
> >>
> >> I speculate that, given the expertise of this group, "Yes" is the right
> >> answer.  However, I have no clue how the answer to your question will be
> >> useful to you.
> >>
> >> I suppose the resulting answers may be more informative than "why didn't
> >> my package carrier meet my expectations?".
> >>
> >> Andy, k3wyc
> >>
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to edwmcc...@gmail.com
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to llader...@icloud.com
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to ard...@gmail.com
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to edwmcc...@gmail.com
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to h...@optilink.us
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6...@arrl.net
__
Elecraft mailing 

[Elecraft] Antenna Quandary

[Richard]

I’m trying to send this to the reflector at large, but it keeps attaching 
John’s name. Sorry, John. This will be my third try.

Anybody out there super-well versed in the behavior of the half-wave dipole?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Antenna Quandary

[Richard]

Anybody out there super-well versed in the behavior of the half-wave dipole?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Antenna Quandary

[Richard]

Anybody out there super-well versed in the behavior of the half-wave dipole?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Sherwood Receiver Tests

[Richard Donner]

Hi
 I am no expert but as far as I can tell any of the top  radios with
narrow  dynamic range above 92 db would be fine in most environments.  The
k4d was measured at  101.
A few years ago that dynamic range would have been considered fantastic.
I notice that the k3s is at 106.  Who is going to notice that difference.
The ergonomics on the k4d is much better once you get used to it.
Everything you need to know while operating is plainly visible.  For
example
I find I like having a real time UTC clock and date  kept accurately
automatically.  It is also nice to see the code speed and power levels
readily visible.
etc
Richard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft Service: we hear you

[Richard Hill]

Thank you!

On Thu, Apr 21, 2022 at 4:31 PM Wayne Burdick  wrote:

> >
> > On Apr 21, 2022, at 3:24 PM, Richard Hill  wrote:
> >
> > I thought the last call was to get on a list so they knew how much to
> order when suitable parts were found, and ultimately acquired, so they
> could build and ship to know purchasers…and perhaps more.
>
> Yes. We completed that process. Some of the "last call" modules are in
> fabrication or will be soon, while others are waiting for parts to become
> available.
>
> We're building some extras of each module.
>
> Wayne
> N6KR
>
>
>
> --
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft Service: we hear you

[Richard Hill]

I thought the last call was to get on a list so they knew how much to order
when suitable parts were found, and ultimately acquired, so they could
build and ship to know purchasers…and perhaps more.

NU6T

On Thu, Apr 21, 2022 at 3:11 PM Julia Tuttle  wrote:

> Wait, so what is the deal with K3 modules? I thought there was a "last
> call" for orders a while back. Are y'all finding second sources or
> re-engineering modules to make those available again?
>
> On Thu, Apr 21, 2022 at 5:49 PM Wayne Burdick  wrote:
>
> > In response to this voluminous thread:
> >
> > First, I'd like to thank everyone who has purchased and enjoyed using our
> > radios. It's heartwarming to hear of your continued support.
> >
> > Many of you have already articulated the present challenges we and other
> > electronic companies face. It comes down to two things: the design
> lifetime
> > of modern, miniature components like ICs and connectors; and a fickle
> > supply chain--one that imploded because of events of the past two years.
> >
> > I can promise that we'll do everything possible to keep ahead of these
> > issues. As evidence I could point to:
> >
> > - the K2, still in production after 20 years
> >
> > - the KX3, still in production after 10 years
> >
> > - the K3 (going on 14 years; even though we're no longer selling it,
> we're
> > acquiring the components to build additional modules and continue
> providing
> > support)
> >
> > This is in stark contrast to the practice of some of our competitors,
> > replacing radios with new ones that are largely tweaks on the old, on a
> > new-car/new-smartphone cycle of every few years.
> >
> > Throughout the lifetime of each of our products, we've offered new
> > accessories, new internal option modules, and numerous free firmware
> > updates. This gradual evolution of each product line is consistent with
> our
> > roots as a kit company, engaging what amounts to a nation of Elmers in a
> > community of growth and camaraderie.
> >
> > Thanks, again, for being the best customers a little company ever had.
> >
> > 73,
> > Wayne
> > N6KR
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ju...@juliatuttle.net
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
>
-- 
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Elecraft Service

[Richard Isaacs via Elecraft]

Well, that’s a great question but angled to a non answerable solution.
My take, and remember I live in New York, when companies put out a new model, 
some run to try the new flavour of the day. Now that the bloom is off the rose 
so to speak, we look back and see or ask ourselves being the times we live 
in…do we really need the new unit to begin with. My grandmother, or Bubbi for 
those in the know, always told be the devil you know is better than devil you 
don’t. That’s why I have always used Geico and it works for me. My K3 is a fit 
for me, like a denture, custom fit as Elecraft is an Ala carte kind of company 
as one size doesn’t fit all. I have the Panadapter to go with it and an MH4, a 
K2, and a KX# with Panadapter. No amp as I don’t speak to people on other 
planets…100 watts is just fine.
New rollouts are sketchy and costly, constant changes, recalls, and beta 
versions. Parts…I thought it was law to keep parts in production for 7 years, 
and…since the line is lean to begin with, why not stockpile, not everyone has 
the money to upgrade. I have had Icom and Yaesu, but purchased Elecraft as I 
could and wanted too. Old stuff…I have a massive collection of vinyl…4k+, my 
equipment MacIntosh 4100, Klipschorns, LaScalas, Cornwalls, Heresys, SOTA 
Saphire TT…old stuff by today’s comparison. Would I sell any of it???…NO. It 
can be repaired and I love the sound, custom fit like dentures. 
I am 74 years of age as well with no known warranty, thus I am enjoying and 
focusing on what I own.
I know, I’m rambling but I’m sure you get the point.

W3RKI aka Rick who is still out having fun…Concerts…tomorrow my friend George 
Winston, and Monday Jack Casady and Jorma Kaulonen. Life is go

> On Apr 21, 2022, at 2:48 PM, Rick Bates, NK7I  wrote:
> 
> One simple question (with no implied or stated answer):
> 
> What would make a K3 a poor choice now, compared to other (used) brands?
> 
> It still works better than many (most) other brands, the only real risks are 
> lack of parts when repairs are needed, as with any other brand and no more 
> updates (which only a FEW brands offer at all, if ever).
> 
> With the jump to the K4, some K3 are available for sale and STILL sold within 
> minutes to hours of posting.
> 
> The question is simple; the answer is personal and complex.
> 
> 73,
> Rick NK7I
> K3, P3, KPA500, K4, KPA1500 (and Kenwood, Icom, others)
> 
> 
> 
> On 4/21/2022 10:33 AM, Bill Davis via Elecraft wrote:
>>  This is my first post since I became an Elecraft owner back in 2009. I made 
>> the move to Elecraft after visiting with Gene Zimmerman the then QST VHF 
>> editor at the Elk Grove IL Central States VHF convention. Gene was a friend 
>> and was "over the moon" with his K3 and I had been looking for several 
>> months. I liked that it was American made, plugin boards that should assist 
>> in making the radio more maintainable and the history of the company. Then 
>> there was the performance! K3 SR #3460 arrived shortly after that followed 
>> some years later by K3s SR#10644.
>>   I have been a ham for 63years and was very late joining into the solid 
>> state world when it came to my ham gear. I had a TS-700 from Kenwood that 
>> was solid as a brick! That rig is 46years old and still works like the first 
>> day it was purchased back in 1976. I bought my first Icom in 1991 followed 
>> over the years by 3 other Icoms rigs. Every single Icom I ever had , had 
>> issues. Always fixable except for a mysterious 2m SSB distortion issue in a 
>> IC-746Pro that haunted me from the first 2m SSB QSO I had with it to when I 
>> gave up on it 9yrs later.
>>   I was convinced that Elecraft was "THE ANSWER". How naïve I was. I 
>> expected a longer run for the K3 in years and the same with the K3s. 
>> Software upgradeable, never obsolete, a "new" radio every update! But 
>> technology marched on and "everyone" wanted the latest bells and whistles 
>> even if the bottom line performance improvements were minimal.
>>How can we be to a point where a $4,000 radio should be considered a toss 
>> and replace? Do the K3 and K3s really contain components that are truly 
>> unobtainable? If that is the case, why would we expect the K4 to be any more 
>> maintainable? Did Icom, Kenwood and the rest stockpile more of the non-run 
>> of the mill components where they could be more maintained for a longer 
>> period of time?
>>IF SOMEWHERE the parts are out there, it looks to me like an independent 
>> shop repairing Elecraft gear could fly. It sounds like depending upon 
>> Elecraft to keep us on the air is close to a thing of the past. Looking at 
>> my Elecraft "investments", much smaller than many, that is a very hard pill 
>> to swallow.
>> 73  Bill K0AWU (Weak signal VHF and above for 63 years)
>> __
>> Elecraft mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>> Help:http://mailman.qth.net/mmfaq.htm
>> 

[Elecraft] General Coverage Board for K3s

[Richard]

Have you a KBPF3A General Coverage Board you’d sell?

Cheers,

Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KPA 500

[Richard]

It’s also worth mentioning that if the radio and the amp are hard wired 
together, changing the band using the buttons on the front of the amp 
automatically changes the band on the radio.

Richard
W4KBX

> With the  band switching cable between the radio and amp, the amp follows the 
> receiver frequency/band.  Thus it is not necessary key the radio or to 
> transmit anything.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need help with kat500 utility

[Richard Donner]

Hi
 I believe for some intermittent time the tuner did not move the caps to
the antenna side.  It is working now though.
All these boxes we have are computer controlled.  I
Thanks all


On Wed, Feb 23, 2022 at 4:27 PM Richard Donner 
wrote:

> Hi
> Well I checked the  antenna and it is just as before the problem.
>   Is the capacitor setting normally checked by default?
> This setting was not chosen automatically.
>
>   After I  enabled the capacitor setting the tuner tuned immediately to a
> low SWR on the low end of the band.
> I noticed that now it is automatically chosen.
> This has been a nice study time to figure how this tuner works.  It seems
> fine now.
> Thanks for  the help  all seems well.
>
> On another note , my k3 has reached its 15  birthday year
> Thanks all
> Richard
>
>
> On Wed, Feb 23, 2022 at 1:48 PM Richard Donner 
> wrote:
>
>> I  have some question about the operate tab in the kat500 utility.
>> In the "others"  what should be checked off?
>> "caps on the Ant side"
>> "amp key interrupt"
>> "attenuator"
>>   Not sure what these things do.
>>
>> I had been using my kat500 for years and all of a sudden low SWR
>> matches  could not be found on one of my antennas.   It was odd because
>> everything was fine yesterday.
>> I found by checking "caps on the Ant side"  Ii could get a match in
>> manual mode.
>>  I wonder if that had been checked and all of a sudden it stopped being
>> checked?
>>
>> Also I wonder if the"amp key interrupt "  was ever set properly.
>> How should it be set with a KPA500 amplifier all cabled up.
>> I did not see a simple explanation what these kat500 setting are for.
>>
>> Any help would be appreciated.  I think I am going for a walk
>> Thanks   Richard wa6kyr
>>
>>
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Need help with kat500 utility

[Richard Donner]

Hi
Well I checked the  antenna and it is just as before the problem.
  Is the capacitor setting normally checked by default?
This setting was not chosen automatically.

  After I  enabled the capacitor setting the tuner tuned immediately to a
low SWR on the low end of the band.
I noticed that now it is automatically chosen.
This has been a nice study time to figure how this tuner works.  It seems
fine now.
Thanks for  the help  all seems well.

On another note , my k3 has reached its 15  birthday year
Thanks all
Richard


On Wed, Feb 23, 2022 at 1:48 PM Richard Donner 
wrote:

> I  have some question about the operate tab in the kat500 utility.
> In the "others"  what should be checked off?
> "caps on the Ant side"
> "amp key interrupt"
> "attenuator"
>   Not sure what these things do.
>
> I had been using my kat500 for years and all of a sudden low SWR  matches
> could not be found on one of my antennas.   It was odd because everything
> was fine yesterday.
> I found by checking "caps on the Ant side"  Ii could get a match in manual
> mode.
>  I wonder if that had been checked and all of a sudden it stopped being
> checked?
>
> Also I wonder if the"amp key interrupt "  was ever set properly.
> How should it be set with a KPA500 amplifier all cabled up.
> I did not see a simple explanation what these kat500 setting are for.
>
> Any help would be appreciated.  I think I am going for a walk
> Thanks   Richard wa6kyr
>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Need help with kat500 utility

[Richard Donner]

I  have some question about the operate tab in the kat500 utility.
In the "others"  what should be checked off?
"caps on the Ant side"
"amp key interrupt"
"attenuator"
  Not sure what these things do.

I had been using my kat500 for years and all of a sudden low SWR  matches
could not be found on one of my antennas.   It was odd because everything
was fine yesterday.
I found by checking "caps on the Ant side"  Ii could get a match in manual
mode.
 I wonder if that had been checked and all of a sudden it stopped being
checked?

Also I wonder if the"amp key interrupt "  was ever set properly.
How should it be set with a KPA500 amplifier all cabled up.
I did not see a simple explanation what these kat500 setting are for.

Any help would be appreciated.  I think I am going for a walk
Thanks   Richard wa6kyr
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S to K3/0 mini Connection

[Richard Cutter]

Hello Everyone.   I would like to directly connect my K3S to a K3/0 mini, 
basement shack to upstairs living room.  All the information seems to use the 
RemoteRig and internet to do the linking.  Has anyone hardwired K3S to K3/O ??? 
 Any help would be appreciated..
Tnx,  Rick WA3MKT

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KAT500 Memories

[Richard]

Can KAT500 frequency memories set by me be deleted either individually or per 
band?

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] 80-meter Antenna Fun

[Richard]

I’m in the process of tuning a just-finished 80-meter “triangular loop.” So 
far, the early signs are encouraging.

I will use this for SSB exclusively. Being “new” to 80, I don’t yet know the 
territory.

The antenna has a narrow 2:1 bandwidth, and my main interest is DX.

What would be a good center frequency for 80-meter SSB DX?

Thanks.

Richard — W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] WTB. Elecraft K3/0-Mini

[Richard Cutter]

Looking for a K3/0-Mini….   Tnx Rick WA3MKT




Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Slug Needed!

[Richard]

No, not that kind, the wattmeter kind.

I need a 100-watt 2-30 MHz slug for my CD 81000-A wattmeter which uses the same 
slugs as does the Bird 43.

MUST be 100 watts.

What’cha got?

PLEASE reply directly: flat...@comcast.net <mailto:flat...@comcast.net>

Cheers!

Richard Kunc ~ W4KBX 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K Line: Signal loss in a QSO

[Richard Ferch]

You may or may not consider this logical, but: The description of the
transmitter gain calibration procedure in the manual does not call up any
special calibration menu. It just says transmit a carrier at exactly 5.0
watts or exactly 50 watts. Apparently the firmware uses these power level
settings as a trigger to do a gain calibration.

Not wanting to do unexpected gain calibrations while operating, I have
always set my power to 4.9 watts when I want to operate QRP, and to 49
watts if I want to operate at 50 watts.

I am fairly sure I saw a post here by one of the elecraft techs about this
not so very long ago.

73,
Rich VE3KI


N7WS wrote:

It is not in the manual, but has appeared here many times, without logical
explanation.

Wes   N7WS

On 1/16/2022 6:52 AM, j...@kk9a.com wrote:
> I have not heard this either. Is this in the manual? 5 watts would be a
> tough output to avoid if you enjoy QRP.
>
> John KK9A
>
> KE8G wrote:
>
> Hmm, I've never heard that 5 or 50 watts of power shouldn't be run.
>
> 73 de KE8G - Jim
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KX2 for sale

[Richard Gilley]

HI, 
Selling my KX2 #02335 purchased Dec 2017, Lightly used and includes:

KXPD2 -paddle
KXBT2 -LI Battery
KXBC2 -Charger
KXAT2 -Ant Tuner
AX1/W40 meter coil
Tripod Adapter
Case (not CS40 or CS60)
32’ Counterpoise wire
Manual
Asking $1100. Inc. shipping and Insurance within the 48.

Photos available at richgilley...@gmail.com 

Thank you
R Gilley
AD1G


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Kat500 Firmwar

[Richard Gilley]

Thank you for your response.

Looks like I can down load 1.21.10.9, after download and Extraction I have the 
message Extraction completed successfully but the header still has 1.19..9.6.

I do have access to the KAT, so will leave it at that for now, too much time 
waisted.

Thank you again and to all those that responded

> On Dec 20, 2021, at 8:16 PM, Bob McGraw  wrote:
> 
> Richard et al:
> 
> Just checked my KAT500 and it had V1.75 installed.  Then with the KAT500 
> Utility, version 1.21.9.15, I did download the firmware from the Elecraft 
> site and install V2.05 into my KAT500.   I saw no issues.  Running a Windows 
> 10 Pro 64 bit computer.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 12/20/2021 6:18 PM, elecraft-requ...@mailman.qth.net wrote:
>> Message: 23
>> Date: Mon, 20 Dec 2021 19:18:48 -0500
>> From: Richard Gilley
>> To:elecraft@mailman.qth.net
>> Subject: [Elecraft] Kat500 Firmware
>> Message-ID:<1b3a4757-fc90-4c7c-a560-807c9de63...@gmail.com>
>> Content-Type: text/plain;charset=utf-8
>> 
>> Hi,
>>  Having difficulty loading latest version of the Kat500 utility.  The 
>> version I have is 01.75, the utility indicates that 2.05 is available.  
>> However the new version does not load but the message ? Input hex file is 
>> corrupt, check sum is not zero?
>> 
>> I have the same issue attempting to load a Mac and Linux.
>> 
>> Perhaps 2.05 is not available?  Or is there a fix I am not aware of, or 
>> perhaps it is not necessary to upgrade?
>> 
>> Thank you for your interest. Help would be appreciated.
>> 
>> Best
>> AD1G
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richgilley...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Kat500 Firmware

[Richard Gilley]

Hi,
Having difficulty loading latest version of the Kat500 utility.  The 
version I have is 01.75, the utility indicates that 2.05 is available.  However 
the new version does not load but the message “ Input hex file is corrupt, 
check sum is not zero”

I have the same issue attempting to load a Mac and Linux.

Perhaps 2.05 is not available?  Or is there a fix I am not aware of, or perhaps 
it is not necessary to upgrade?

Thank you for your interest. Help would be appreciated.

Best 
AD1G  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KpA1500 output

[Richard Goodin via Elecraft]

Hi all,
Had a falt on amp (swr) pushed reset corrected swr and now get no output. Seams 
like reset not working. Any suggestions?

Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Rx-In/Out used for exteranl SDR Device?

[Richard Ferch]

To use the RxAnt In/Out BNC connectors in the KXV3, you need to select the
RX Ant from the front panel RX Ant switch. This means you need a jumper
between RX Ant Out and RX Ant In to feed the RX in the K3, with a tee or
splitter to feed signal to the SDR. If you do not select RX Ant, the only
signal that appears at the RX Ant Out connector is due to imperfect
isolation in the RX Ant relay.

73,
Rich VE3KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Legal Limit With FT8

[Richard]

It might have been derogatory if I had named the other guy as you asked me to 
do; the information I shared is absolutely true. What's your problem?

Richard

> On Nov 26, 2021, at 4:52 PM, Bob McGraw  wrote:
> 
> Richard:
> 
> May I suggest you refrain from posting derogatory or incorrect information on 
> any ham radio site. It is in the best interest of all of us.
> 
> 73
> 
> Bob, K4TAX
> 
> 
> On 11/26/2021 3:38 PM, Richard wrote:
>>> I'd like to know more about the high power station running FT-8 which is 
>>> allegedly causing you issues. Who is he (call), where's he located, what 
>>> band(s) are affected, when does this occur?

>> This was about two years ago, nothing is current. Anyway, I wouldn't give 
>> you that information; I'm not registering a complaint. Let sleeping dogs lie.
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Forty Meter SSB

[Richard]

Is there any area within the 40-meter SSB segment where DX tends to congregate 
or appear? I ask this for antenna tuning purposes.

Cheers,

Richard — W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] 4Sale - P3 and KX3

[Richard Lawn]

I have the following items for sale:

*P3 with VGA card* in excellent condition, no scratches and used in a
non-smoking environment. No issues and I just took it out of service with
my early model K3. I decided I didn’t need it since I got an LPpan2 that
serves my purposes. $950 shipped and insured with manual anywhere in
continental US. I do not have the original box though it will be packed
very well.


*KX3 *in excellent condition with the following extras:

ATU

MH3 Mic

HardRock50 interface cables and breakout board

KXBC3 Battery Charger & Real Time Clock

Roofing Filter

Printed, spiral bound manual

Palm Radio key

Another small plug in paddle

2 power cords

ProAudio Heat Sink

KX3 USB cable

This will be shipped and insured in the original box anywhere in the
continental US for $1200.


Contact me off the list for photos or questions.

73

Rick, W2JAZ

rjlawn at gmail dot com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Legal Limit With FT8

[Richard]

There's a major jerk who lives within about 20 miles of me who runs BIG power 
with FT8. When he's on the air, he blots out my K3S so his is the only signal 
on the waterfall, the only signal the decoder sees. When his BIG POWER is on 
the air, I can't be. And he's made it clear that he doesn't care what he does 
to anyone else's enjoyment. Power for power's sake is contagious.

On the other hand, I've made several 10,000 to 11,000 mile Australian contacts 
with 15 watts and a hex beam at 30 feet.

Richard
W4KBX


> On Nov 11, 2021, at 2:17 AM, Jim Brown  <mailto:j...@audiosystemsgroup.com>> wrote:
> 
> On 11/10/2021 10:36 PM, Rick Tavan wrote:
>> I must be missing something.
> 
> Hi Rick,
> 
> FT8 and similar modes are weak signal modes, and for difficult paths, it's 
> all about signal to noise, not signal to QRM. For several seasons, I've been 
> running legal limit to fill in DXCC to eastern EU on 160M. During the summer, 
> many of us run legal limit and lots of aluminum on 6M for weak and brief 
> multi-hop Es openings to fill in missing grids in search of the Fred Fish 
> award. We also run power for meteor scatter, and most who do moonbounce run 
> legal limit.
> 
> The fundamental GOOD reason for power is RX noise on the other end of the 
> QSO. I regularly give signal reports 10-15 dB better than I receive, simply 
> because most hams are bathed in electronic noise from their own homes and 
> those of their neighbors. Noise levels have increased drastically over the 
> years. When I first moved to W6 in 2006, I could work EU on CW. Not a lot, 
> but at least 3-4 QSOs per year, sometimes more. In the last six years, I've 
> HEARD 6 CW signals from EU, and only two heard me. And my 160M antenna farm 
> is better today than it was then.
> 
> 73, Jim K9YC
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html 
> <http://www.qsl.net/donate.html>
> Message delivered to flat...@comcast.net <mailto:flat...@comcast.net> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Legal Limit With FT8

[Richard]

I had a discussion about this sort of madness with Joe Taylor, creator of FT8 
and WSJT-X. Here's what he had to say about it:

"Hi Richard,

"Yes, it's annoying when people engage in a QRO arms race to make more QSOs or 
make them more quickly with FT8. Using high power is one thing when conditions 
demand it, as with some 160 m DX paths, for example. It's quite another thing 
when high power is not required to make the QSO, but only to help you get 
through first.

"However, it has always been thus, and there's not much anyone can do about it. 
As a general rule it's often useful to move up above 2500 Hz or so, audio 
frequency. Or even to set your dial frequency 1 kHz higher than the default for 
a band.

"We are also thinking about suggesting a "QRP FT8 sub-band" in which power 
should be limited to 10 W (say).

    "-- 73, Joe, K1JT"

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] PX3 #2867 for sale

[richard gilley]

PX3 for sale, perfect condition asking $480.00, includes:

PX3CBL
Power Cable
KXUSB
Manual
Shipping CONUS included, USPS Priority Mail.  Insurance add $25.00.
PayPal preferred or check, will ship when cleared.  Photo upon request contact
off line at richgilley...@gmail.com 

Thank you
R Gilley
AD1G


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Scanning With a K3s

[Richard]

The manual says:

"Set VFO A to the starting frequency, and VFO B to the ending frequency."

This becomes tedious if I want to scan the entire 10-meter SSB segment; 
cranking VFO B to 29.700 takes forever.

Is there a way I can use FREQ ENT to put 29.700 in VFO A, then transfer or copy 
that to VFO B, then put 28.300 in VFO A? Can I use FREQ ENT to do the latter?

Thanks.

Richard Kunc – W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] TVI and More

[Richard]

A close neighbor was hearing through her add-on computer speakers what was 
probably me on 20 meter SSB. She said she couldn't make out any words, but it 
sounded like a garbled voice. After determining that it was indeed I she was 
hearing, I clamped a few ferrites on the two cheap speaker cables and the 
problem was solved. I hadn't had any interference problems since 1955!

I think I read here on this reflector that there is some sort of filter that I 
can add to my transmission coax that will prevent this sort of thing. Can 
anyone tell me about this approach to TVI?

Oh, and my neighbor, who has an Alexa thing in every room in her house, all 
ganged together with WiFi, also said her Alexa was shutting off suddenly, then 
coming back on several seconds later. Could this Alexa-I? I wouldn't even know 
where to start on that one, especially since she has all that WiFi raging all 
through her house.

All help will be gratefully received.

Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Unique QSO

[Richard]

How about this? K3s, 100w, Hex Beam, Central Florida to Australia, 20 meter 
SSB, LONG PATH, 15,727 miles; he was 5x3, I was 5x5.

Richard
W4KBX


> On Sep 13, 2021, at 3:03 PM, barry halterman  wrote:
> 
> Reminds me of the time, way, way back going up on MT. Diablo with a two
> meter lunch box and a simple J pole antenna. Man, what a blast that was!
> 
> On Mon, Sep 13, 2021, 2:38 PM Hank via Elecraft 
> wrote:
> 
>> Great story!!!
>> 
>> I remember in 2019 making a cool contact like that. I was running the KX3
>> at 10 watts with the AX1 sitting in a hiking chair on top of Pigeon Mtn in
>> NW Ga and made a 20m USB contact with a gentleman in Mexico running a b new
>> to him K3s at 100 watts into a wire dipole.
>> 
>> That was one exciting POTA contact!
>> 
>> Hank
>> K4HYJ
>> 
>>> On Sep 13, 2021, at 2:19 PM, Wayne Burdick  wrote:
>>> 
>>> I was out hiking with my son yesterday at Las Trampas Wilderness (about
>> 25 miles east of San Francisco). We took a break at the highest point to
>> taken in a 360 degree view of the Bay Area.
>>> 
>>> After lunch, I pulled out the KX2, attached a 4' whip, and immediately
>> found Bill, W6H (AKA W8TE) calling CQ on 20 m SSB from New Mexico. I tried
>> a couple of calls using the KX2's built-in mic, but wasn't quite getting
>> his attention through the QRM. So I attached the KXPD2 keyer paddle and
>> called in CW mode. Bill came back to me right away.
>>> 
>>> First K4 to KX2 cross-mode QSO? (Not quite a "200 Meters and Down"
>> achievement, but gratifying just the same.)
>>> 
>>> Wayne
>>> N6KR
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to h...@optilink.us
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kthre...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to flat...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Looking for LP-PAN2

[Richard Lawn]

I might be interested in buying one if anyone has one they aren’t using, as
long as I can find the Yaesu crystal.

Rick, W2JAZ
-- 
Sent from Gmail Mobile
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Tried something else...

[Richard Isaacs via Elecraft]

I unhooked the antenna from the switch box and plugged it directly into the 
K3…tapped ATU…same lines.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com