[LIB] Overclocking a L100CT
Date: Tue, 21 Nov 2006 21:51:36 EST From: [EMAIL PROTECTED] Subject: Overclocking a L100CT The time has come to attempt the overclock on my L100CT. I'm reluctant to go to 266 MHZ, would prefer 233. Xin's site shows one method, and David's (www.silverace.com/libretto) shows another - I think, it's not clear to me. Has anyone done the 233 MHZ overclock that would be willing to share their hopefully successful experience? Lee
[LIB] Overclocking, Frying Eggs, and Gaming on a 110CT
Date: Fri, 10 Nov 2006 11:59:09 -0800 From: John Martin [EMAIL PROTECTED] Subject: Overclocking, Frying Eggs, and Gaming on a 110CT Hello Libretto Users... Have you ever considered over-clocking and put it off? I have for years... and now I wonder why. I just over-clocked my 100CT and 110CT to 266. Took less than 15 minutes each. I have opened Librettos many times for testing and just looking however, so experience was probably worth 15minutes each. I do have many hours of experience board soldering, but nothing this small. But it really wasn't difficult by any means. I have slight tremors and still managed to do it with good hand propping. If you can safely open your Libretto (100CT/110CT) and solder electronics, you can do this! : ) You might need a magnifying glass though. (I did) It is pretty small. One suggestion I didn't notice on the various sites about soldering on these tiny boards... make some sort of sheild from cardboard or plastic of just anything. So that if any solder happened to drip or spatter etc, it can't hurt the rest of the board. I just made about a 1.5cm diameter hole in a piece of thin dense cardboard (as I always do) to protect the other areas of the board from accidental spatter or any number of things waiting to happen. To determine the correct jumpers, I used the pictures from this page of XIN's site which is listed on the Adorable Libretto site. This worked for both of my computers. This is a great site for sure. : ) http://www.fixup.net/tips/ My Libretto 100CT and 110CT are running BIOS 7 and 8, 64Meg of ram, Win98SE. Two processor killing drains that I disable during gaming are Norton Anti-virus and BlackICE Firewall. So far I can't tell much difference on most programs, though I have not benchmarked them before or after. I notice the speed much more in DOS than in Windows. Duke Nukem, Shadow Warrior, Dark Forces, Witchaven, and Quake I (all DOS) are noticeably smoother. In Windows, I am using Quake II as the benchmark in you might say. Windows games that I can see a difference on immediately are Ultimate DooM for Win95 (was REALLY bad previously, but playable now), Ultimate PaintBrawl 2, Blood II, X-Men: The Ravages of Apocalypse, and Age of Empires II. Those are all I have tried so far. If you use your Libretto for heavy gaming, one thing I have noticed is lowering the sound quality in Windows based games (Quake II, Sin, and others that don't come to mind), significantly effects overall game-play. I do not know the reason for this efficiency issue, hardware/software related. Heat buildup: I don't know about this. Both of my Libretto's have always been like little ovens. I don't know if I would even notice more heat unless something starts to melt. One thing I notice is that the hard drive is scorching hot on Libretto's. If you take the covers off your Hard Drive Bay, you could pop that little drive out and cook on it, or iron your clothes with it. I am trying to get a machine shop make an aluminum Hard Drive Bay cover to see if I can't get some of that heat out of there that way. If they can make them reasonably inexpensive (doubt it) I will try to sell some. Just seems like a LOT of heat you could get out of these little computers to extend their lives. I think I am about 10 years late with this idea however. : ) Closing notes: I seriously doubt this procedure is worth it on a 110CT (233mhz) unless you are running unusually heavy software loads and want to squeeze every ounce out the hardware you can. That 33mhz just really isn't that much in the scope of things, especially if there is significant truth to all the horror stories of heat related issues. Processor speed isn't everything. If you have a 5400rpm drive, try going to a 7500rpm hard drive if you want to see serious overall performance increases in environments like Windows that use the hard drive constantly. On the 100CT (166mhz) the speed increase is noticeable and worth it to go to 233 or in this case 266 if you want to risk it. I could always see a difference between my 100CT and 110CT. Anyway, that is my experience with over-clocking so far. Just making the games better, not cooking breakfast with them. If either of them burn my eggs, smoke or have undesirable characteristics, I will let you know. John Martin application/ms-tnef
[LIB] Overclocking a factory P120 50CT
Date: Thu, 22 Dec 2005 11:07:12 -0500 From: Caleb Johnson [EMAIL PROTECTED] Subject: Overclocking a factory P120 50CT Hey all, Quick question - with a late cycle L50ct that has the underclocked P120, do you still cut pin 15 on the W45C54A IC as part of the process? I'm a bit unclear on the instructions. Clearly I have to connect the top two solder points next to the processor in order to get to 133MHZ, and the bottom two to jump to 166, but I can't tell if the instructions are saying to skip the pin cut with the P120 or not. Thanks! Caleb
[LIB] Overclocking 100CT
Date: Thu, 3 Feb 2005 14:59:09 -0500 From: Tony Oresteen [EMAIL PROTECTED] Subject: Overclocking 100CT FWIW a couple of weeks ago I overclocked my Libretto 100CT to 266 MHZ. It worked fine without any external devices. When I tried copying a complete cd-rom, the 100CT would crash I noticed that it was very hot. The CD-ROM PCMCIA card was also extremley hot. Sometine the 100CT would not boot until it cooled down for awhile. I decided to slow the 100CT down a bit and set the speed to 233 MHZ on Tuesday. Since then I've coppied a lot of cd-roms and the unit is stable with the CD-ROM attached. The PCMCIA card doesn't seem to be as hot (it is warm thought!). It has 64MB RAM. Tony Oresteen Montverde, FL
RE: [LIB] Overclocking 100CT
Date: Thu, 3 Feb 2005 12:49:49 -0800 From: [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking 100CT Tony, did you use the procedure outlined in the archives of this bulletin board? I have those procedures and was contemplating doing the procedure, but never got around to it. What was involved when you had to slow it down? Any problems / suggestions after your experience? Thanks, Dick Sullivan -Original Message- From: Tony Oresteen [mailto:[EMAIL PROTECTED] Sent: Thursday, February 03, 2005 3:06 PM To: Libretto Subject: [LIB] Overclocking 100CT Date: Thu, 3 Feb 2005 14:59:09 -0500 From: Tony Oresteen [EMAIL PROTECTED] Subject: Overclocking 100CT FWIW a couple of weeks ago I overclocked my Libretto 100CT to 266 MHZ. It worked fine without any external devices. When I tried copying a complete cd-rom, the 100CT would crash I noticed that it was very hot. The CD-ROM PCMCIA card was also extremley hot. Sometine the 100CT would not boot until it cooled down for awhile. I decided to slow the 100CT down a bit and set the speed to 233 MHZ on Tuesday. Since then I've coppied a lot of cd-roms and the unit is stable with the CD-ROM attached. The PCMCIA card doesn't seem to be as hot (it is warm thought!). It has 64MB RAM. Tony Oresteen Montverde, FL
Re: [LIB] Overclocking 100CT
Date: Thu, 3 Feb 2005 16:34:48 -0500 From: Tony Oresteen [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100CT Dick, I used Xin's procedure here: http://www.fixup.net/tips/l100266.htm It took me about 33 minutes to overclock from 166 to 266. Going from 266 to 233 took about 50 minutes. I used a Radio Shack 15 watt soldering iron and a magnifying glass. To drop the speed to 233 I had to remove solder from the board. I used Radio Shack solder braid (solder wick) to undo one jumper I had soldered, and one that was factory soldered. It is a PAIN to get the motherboard area. Getting the back off was simple enough. Getting the PCMCIA unit off the motherboard required that you disconnect the LCD screen and rotate the MB so you can get at the last 2 screws holding the PCMCIA unit on the mother board. I accidentally knocked my 32mb RAM card out of it's socket so I had to remove the keyboard to get at the memory slot. That's why it took me longer to down speed as I had never replaced the memory in a 100CT so I had to figure it out. My advice is to overclock to 233 MHz. Take your time and you should be ok. If you have never soldered before get someone else to do it for you. Tony Oresteen Montverde, FL - Original Message - From: [EMAIL PROTECTED] To: Libretto libretto@basiclink.com Sent: Thursday, February 03, 2005 3:50 PM Subject: RE: [LIB] Overclocking 100CT Date: Thu, 3 Feb 2005 12:49:49 -0800 From: [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking 100CT Tony, did you use the procedure outlined in the archives of this bulletin board? I have those procedures and was contemplating doing the procedure, but never got around to it. What was involved when you had to slow it down? Any problems / suggestions after your experience? Thanks, Dick Sullivan
RE: [LIB] Overclocking 100CT
Date: Thu, 3 Feb 2005 15:20:38 -0800 From: [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking 100CT Tony, this was exactly what I needed, thanks. Yes, I have soldered before, so that is not a problem. It almost looks like you could put in a mini 3 position dip switch and then just change the settings if it gets too hot. This assumes those are not resistors in Xin's photos. From Xin's pictures, it appears the switches would be set as follows (reading from left to right): 266 MHz - OPEN CLOSE CLOSE 233 MHz - CLOSE OPEN OPEN 200 MHz - CLOSE OPEN CLOSE 166 MHz - OPEN CLOSE OPEN There was some discussion on adding wires to connect the USB from the motherboard and bring the wires out to a USB connector (see post on 1/14/05 from Phil Nienhuis Subject: Re: USB [Was: Re: [LIB] slow]). Some modification to tell the motherboard the EPR was connected would also have to be made for this to work, but this would be a welcome addition to the Libby. David Chien had described his addition of the mouse pins on the side of his Libby, using the hole for the reset button to bring the wires out. Using this technique and the miniature USB connector, I could envision a small USB port on the side of the Libby. Attach a dongle to convert it to a standard USB connector and we are set. Looking at the hardware manual, pin 68 of the docking connector is used to detect the docking station, pins 91 - 94 are the USB port. At this point, what I really need is a schematic so I can see what voltage level to put on pin 68 and which pin (91 or 92) is the plus supply and which is the minus. Also, whether any buffer chips are needed. Anyone have a link to the L100CT schematic? What about a schematic of the docking station? Dick Sullivan I used Xin's procedure here: http://www.fixup.net/tips/l100266.htm It took me about 33 minutes to overclock from 166 to 266. Going from 266 to 233 took about 50 minutes.
Re: [LIB] Overclocking 100CT
Date: Thu, 3 Feb 2005 18:53:02 -0500 From: Anthony Oresteen [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100CT The description of the switches is correct. Mine has been set to 166, 233, and 266. I never tried 200. I don't have a schematic, sorry. A DIP switch sounds interesting. Space is very tight so I don't know where you would put it. I'm thinking about running the mouse port out the side as well. Tony Oresteen KG4SPA 407-469-2818 home 407-256-4215 cell Montverde, FL - Original Message - 266 MHz - OPEN CLOSE CLOSE 233 MHz - CLOSE OPEN OPEN 200 MHz - CLOSE OPEN CLOSE 166 MHz - OPEN CLOSE OPEN
Re: [LIB] Overclocking L100?
Date: Tue, 15 Jun 2004 12:07:09 -0700 (PDT) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L100? Can anyone point me to the instructions for overclocking a Libretto L100 to 233MHz? I can't seem to find them online. see my site, overclocking section, overclocking article. Also, is it still true that the RAM is limited to 64MB? No workarounds? that's it. no workarounds. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking L100?
Date: Sun, 13 Jun 2004 10:07:14 -0700 From: John Liu [EMAIL PROTECTED] Subject: Overclocking L100? Can anyone point me to the instructions for overclocking a Libretto L100 to 233MHz? I can't seem to find them online. Also, is it still true that the RAM is limited to 64MB? No workarounds? Thank you. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking L100?
Date: Sun, 13 Jun 2004 10:07:14 -0700 From: John Liu [EMAIL PROTECTED] Subject: Overclocking L100? Can anyone point me to the instructions for overclocking a Libretto L100 to 233MHz? I can't seem to find them online. Also, is it still true that the RAM is limited to 64MB? No workarounds? Thank you. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking L100?
Date: Mon, 14 Jun 2004 22:16:46 -0700 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L100? Hi John, David's page at http://www.silverace.com/libretto/ has info on overclocking the L100 ... bear in mind that if you live in hot climates, you'll want to be careful of overheating. The RAM does seem to be limited to 64MB and since the board is proprietary, there don't seem to be practical workarounds. Of course, someone might be able to make up a new board and reprogram the BIOS to recognise it but given the age of the Libretto, one does have to wonder how viable it is. Cheers! - Raymond P.S. Did anyone else get this message twice? Quoting John Liu [EMAIL PROTECTED]: Date: Sun, 13 Jun 2004 10:07:14 -0700 From: John Liu [EMAIL PROTECTED] Subject: Overclocking L100? Can anyone point me to the instructions for overclocking a Libretto L100 to 233MHz? I can't seem to find them online. Also, is it still true that the RAM is limited to 64MB? No workarounds? Thank you. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] Cooling and Overclocking
Date: Wed, 29 Oct 2003 08:24:42 - From: Fisher, Dave (IBM) [EMAIL PROTECTED] Subject: RE: [LIB] Cooling and Overclocking Date: Wed, 29 Oct 2003 10:05:47 +0800 From: Raymond Subject: Re: [LIB] Cooling and Overclocking When I had my L50 clocked to 120 (it wasn't one of those with an underclocked 120), when I ran anything that would have the HDD and/or CPU running flat out, I'd make sure I didn't have anything in the PCMCIA slot if at all possible and I'd flip the keyboard up (I never bothered putting that keyboard screw back in after the second time I took it apart) so the heat plate could get some air. If it were looking like it was still having problems or if it had to have something in the PCMCIA slot, I'd stand it on end so air could flow past both the top and bottom of the laptop (standing on end also helps get the convection currents going) ... When I used to run an OC'ed Lib50 @ 100Mhz I found the port replicator invaluable as it lifted the Lib off the desk just enough to aid cooling... I just used to use that and the software cooler RAIN and found it was enough... ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Cooling and Overclocking
Date: Sat, 25 Oct 2003 08:00:17 -0400 From: Larry Fieman [EMAIL PROTECTED] Subject: Re: [LIB] Cooling and Overclocking I'm embarking on my first overclocking adventure. An L50 (32MB, 40G), hopefully with an underclocked P120, is headed towards 100Mhz/ switchable to 133Mhz at 66Mhz bus speed. I've read some about software coolers, but nothing about hardware for cooling for Librettos. Any hardware cooling tricks to consider when overclocking an L50? Thanks, Larry ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Cooling and Overclocking
Date: Wed, 29 Oct 2003 10:05:47 +0800 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] Cooling and Overclocking At 06:51 PM 28/10/2003 -0700, you wrote: Date: Sat, 25 Oct 2003 08:00:17 -0400 From: Larry Fieman [EMAIL PROTECTED] Subject: Re: [LIB] Cooling and Overclocking I'm embarking on my first overclocking adventure. An L50 (32MB, 40G), hopefully with an underclocked P120, is headed towards 100Mhz/ switchable to 133Mhz at 66Mhz bus speed. I've read some about software coolers, but nothing about hardware for cooling for Librettos. Any hardware cooling tricks to consider when overclocking an L50? When I had my L50 clocked to 120 (it wasn't one of those with an underclocked 120), when I ran anything that would have the HDD and/or CPU running flat out, I'd make sure I didn't have anything in the PCMCIA slot if at all possible and I'd flip the keyboard up (I never bothered putting that keyboard screw back in after the second time I took it apart) so the heat plate could get some air. If it were looking like it was still having problems or if it had to have something in the PCMCIA slot, I'd stand it on end so air could flow past both the top and bottom of the laptop (standing on end also helps get the convection currents going) ... Obviously these are not practical solutions if you're actually trying to type on the thing but then again, I found generally it overheated when it was compiling, encoding MP3s, defragging, ghosting, network copying, etc. and didn't overheat all that often when I was using it interactively (surfing, typing, etc.) unless I was trying to multitask something in the background (something I learned not to do during summer!) ... I've found the same for my L100 (which has it slightly easier ... it doesn't have that single screw holding down the keyboard) - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Cooling and Overclocking
Date: Tue, 28 Oct 2003 22:21:05 -0500 From: Larry Fieman [EMAIL PROTECTED] Subject: Re: [LIB] Cooling and Overclocking Any hardware cooling tricks to consider when overclocking an L50? When I had my L50 clocked to 120 (it wasn't one of those with an underclocked 120), when I ran anything that would have the HDD and/or CPU running flat out, I'd make sure I didn't have anything in the PCMCIA slot if at all possible and I'd flip the keyboard up (I never bothered putting that keyboard screw back in .. Thanks Ray, Larry ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Cooling and Overclocking
Date: Tue, 28 Oct 2003 20:49:00 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Cooling and Overclocking 166/133Mhz is the first I'd try nowadays; 100Mhz only if you don't want to solider and simply cut one pin off the IC I note on my website's overclocking section. You'll know right away if the Lib will run overclocked (and since you are trying to go faster, might as well see if fastest will work like Xin's L50 did - see his website at fixup.net). Anyways, the key here is to leave things so you can reverse the process in case the CPU just can't handle the faster speed. Sometimes, you just get a CPU that doesn't make it. The next most important thing is to make sure you've got the CPU heatsink on right and have a super-thin layer of thermal grease in between. There's a handful of overclockers who reported to me that just reinstalling the heatsink properly with some thermal compound fixed their entire overheating/crashing problem after overclocking. Besides that? Good luck! At least on the L110, about 90% of the attempts to go to 266Mhz were successful out of the 40+ reports I've received from people who have tried. --- On my L50/J, it went right to 100Mhz w/o a problem. I wasn't into doing surface mount solidering, so I figured the nail clipper thing was the easiest to do on my $2k baby. (yep, imported that pricey babe just when it was released years ago) See archives for my nail clipper notes on the L50/J or my overclocking article on my site to see which pin to cut. Finally, get the L50 out on a nice big table, covered with white paper so you can find screws that jump away. Take you're time, and it should take about 30 minutes or so to disassemble it to where you can get to the components - assuming you've never done it and are taking a long gander at everything on the way in. Take pictures to make sure you know how to put it back together again. Have fun! =) = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Exclusive Video Premiere - Britney Spears http://launch.yahoo.com/promos/britneyspears/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] infrared port and overclocking?
Date: Fri, 21 Mar 2003 08:30:29 + From: Bradley Gibbs [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? Fantasy. IR has a theoretical max of 4Mbps Original Message Follows From: Chris Hogan -- Telepay [EMAIL PROTECTED] Reply-To: Libretto [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? Date: Thu, 20 Mar 2003 15:02:39 -0800 Date: Thu, 20 Mar 2003 22:56:59 - From: Chris Hogan -- Telepay [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? Thanks Ray, I haven't butchered the IR port yet :) as my Nokia 8210 quite nicely (and in the case of the Nokia, surf the web through it) under Win2k That must count as sadism, surely, at 9600? I too have an 8210 but was considering an 8310 to get GPRS, however someone told me today that it would be pointless as the IR speed is no faster than 9600. Fact or fantasy? The France trip is off now but I'm still keen to have a reasonably fast no cable solution. Chris ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** _ Surf together with new Shared Browsing http://join.msn.com/?page=features/browsepgmarket=en-gbXAPID=74DI=1059 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] infrared port and overclocking?
Date: Thu, 20 Mar 2003 10:36:43 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? It's a known hiccup. See Libretto Mailing List archives. Others who have overclocked their Librettos have occassionally encountered trouble with the IR working correctlyl. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] infrared port and overclocking?
Date: Thu, 20 Mar 2003 22:56:59 - From: Chris Hogan -- Telepay [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? Thanks Ray, I haven't butchered the IR port yet :) as my Nokia 8210 quite nicely (and in the case of the Nokia, surf the web through it) under Win2k That must count as sadism, surely, at 9600? I too have an 8210 but was considering an 8310 to get GPRS, however someone told me today that it would be pointless as the IR speed is no faster than 9600. Fact or fantasy? The France trip is off now but I'm still keen to have a reasonably fast no cable solution. Chris ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] infrared port and overclocking?
Date: Tue, 18 Mar 2003 16:11:39 - From: Chris Hogan -- Telepay [EMAIL PROTECTED] Subject: infrared port and overclocking? Everything seemed to work at 266 except the Infrared port. Aaaargh!! Just in time -- I was about to o'clock my 100 to 266 but IR is essential for mobile comms through the Nokia for me. I have an Orange/Nokia data card (28.8k with HSCD but not in France, where I may be going for the summer, can only get 9600) so I was going to experiment with an 8310 and GPRS via IR. I'm using Win98SE but would consider going W2k if the overclock works out ok. Has anyone else experienced IR problems with overclocked systems? I don't recall hearing about it before on the list. Any IR snags with W2k maybe? TIA as ever, Chris ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] infrared port and overclocking?
Date: Thu, 20 Mar 2003 17:27:46 +1100 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] infrared port and overclocking? At 04:59 PM 19/03/2003 -0800, you wrote: Date: Tue, 18 Mar 2003 16:11:39 - From: Chris Hogan -- Telepay [EMAIL PROTECTED] Subject: infrared port and overclocking? Everything seemed to work at 266 except the Infrared port. Aaaargh!! Just in time -- I was about to o'clock my 100 to 266 but IR is essential for mobile comms through the Nokia for me. I have an Orange/Nokia data card (28.8k with HSCD but not in France, where I may be going for the summer, can only get 9600) so I was going to experiment with an 8310 and GPRS via IR. I'm using Win98SE but would consider going W2k if the overclock works out ok. Has anyone else experienced IR problems with overclocked systems? I don't recall hearing about it before on the list. Any IR snags with W2k maybe? I've had a few snags with IR and my L100 clocked to 233 and running Win2k, mainly intermittent problems trying to sync my PDA ... I think it may be more to do with the fact that I've removed the IR window to get the cables out to my external PS/2 ports and hence there being a lot of stray light around ... once it starts transferring though it generally makes it OK. I've been able to beam to various models of Palm PDA, other laptops as well as my Nokia 8210 quite nicely (and in the case of the Nokia, surf the web through it) under Win2k ... the drivers are a bit of a pain to set up at times though (and I've yet to be able to get my Canon BJC-80 working under 2k and IrDA due to the changed infrared printing system) ... - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] RE: L100 overclocking
Date: Thu, 13 Mar 2003 23:12:14 +1100 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] RE: L100 overclocking - add some more heatsink grease to the heatpipe connected to the CPU Heatsink pipe? I'm not quite sure what that is, unless it's just the heatsink. It's a pile, apparently filled with fluid, that runs along the top of the heat plate. You can see it if you flip the keyboard up and lift the top edge of the thin shield, it starts on top of the CPU and ends just short of the microphone connector on the left. It's supposed to transmit heat very well ... it's a feature very common on newer laptops (often there are two of them leading from the area above the CPU to where the cooling fins or fan sit) so I guess they work ... Be careful about adding more heatsink grease though, sure if there isn't enough already then adding more is good but don't add too much, it's only to fill in the 'roughness' of the metal at a microscopic level, not bridge a gap that shouldn't exist in the first place. I haven't pulled a MB in sometime, and then only in my L50 L70, not the L100. The L50 and 70 didn't have them. And I really hadn't even thought about checking with the manual on the procedure until you mentioned this. I wonder if there might any special considerations to be aware of before I proceed. *shrug* I just tore into it and thought about the other things later ... heh - make sure that the upper PCMCIA port is open if there is extended disk activity (like for editing video) - make sure that all screws are tight for better heat transfer, especially undek the ketboard - blow air on the L100 with a fan or if too hot, right into the PCMCIA slot with an aquarium aerator. I am planning to use a shell of a PCMCIA card to make some adapter for that. I'd add to that, if you're doing anything intensive (encoding stuff, rendering stuff, compiling stuff, etc.) flip the libby on it's left end and flip the keyboard up (so it looks like a back-to-front F from above with the screen forming the top bar and the keyboard the middle one). That way you get air flowing easily past both the hard drive and the heat plate by convection. Okay... then in Texas, you're dealing with the heat from the ambient air temperature that the system will be exposed to just as I will be here in Florida. Had you clocked up to 266? I wonder if there would be sufficiently less less heat generated at 233 to make a better option at some point. I only clocked to 233 for precisely this reason (my L100 needs to be able to work in ambient temperatures of 30ºC at least) ... Has anyone done the modification to 233? It looks like it may actually entail de-soldering a component? Xin's website doesn't get into just what's involved. That component is a 0-ohm resistor, just flick it out with a soldering iron then link the 3 pads with a short bit of wire (I used a strand out of a piece of multistrand hookup wire). I do notice that David's diagram (which I used to find out how to clock my L100) differs somewhat from the one at fixup.net ... I can see how both could work though (presumably Xin's method relies on some internal pull-up resistor to deal with the middle contact whereas David's one pulls it up explicitly) ... - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | Need help? Visit #Windows98 on DALNet! | | ICQ: 31756092 | Libretto IRC channel #Libretto on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking L100 w/conductive pen
Date: Tue, 11 Mar 2003 08:00:44 -0300 From: Leonardo Armesto [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L100 w/conductive pen yes, it was me.!!! I didn't found the pen yopu describe, but i did it with a special paint very very carefully like i was painting a Mona Lisa : ) Cheers. - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:36 AM Subject: Re: [LIB] Overclocking L100 w/conductive pen Date: Tue, 11 Mar 2003 07:31:22 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L100 w/conductive pen Argentina! I remember your post about this from last summer or fall I think Leonardo. That was the first I'd read about the pen. I suppose I could have done a lot more work in the future if I'd bought a soldering iron and solder to replace what I've got stored a half a continent away... but this just seemed like too much fun! This was a Chemtronics pen made just north of me. Matt (Shel) PS: I've got an epal from AR who's dad is really happy about the financial problems down there. His income comes in US dollars! :-D From: Leonardo Armesto [EMAIL PROTECTED] I did it, and it works great..! - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:56 AM Subject: [LIB] Overclocking L100 w/conductive pen Date: Tue, 11 Mar 2003 03:51:33 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Overclocking L100 w/conductive pen Does anyone have any tips on using this conductive pen to connect the solder point? It seems all to easy and obvious I guess. Maybe clean any coating off the solder if it exists, and then just paint a trail between the two points. Da?! _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] RE: L100 overclocking
Date: Tue, 11 Mar 2003 08:10:43 -0600 From: [EMAIL PROTECTED] Subject: RE: L100 overclocking Few things I learned in Texas: - add some more heatsink grease to the heatpipe connected to the CPU - make sure that the upper PCMCIA port is open if there is extended disk activity (like for editing video) - make sure that all screws are tight for better heat transfer, especially undek the ketboard - blow air on the L100 with a fan or if too hot, right into the PCMCIA slot with an aquarium aerator. I am planning to use a shell of a PCMCIA card to make some adapter for that. Konrad ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] RE: L100 overclocking
Date: Tue, 11 Mar 2003 20:46:59 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] RE: L100 overclocking Hi Konrad, From: [EMAIL PROTECTED] Few things I learned in Texas: - add some more heatsink grease to the heatpipe connected to the CPU Heatsink pipe? I'm not quite sure what that is, unless it's just the heatsink. I haven't pulled a MB in sometime, and then only in my L50 L70, not the L100. And I really hadn't even thought about checking with the manual on the procedure until you mentioned this. I wonder if there might any special considerations to be aware of before I proceed. - make sure that the upper PCMCIA port is open if there is extended disk activity (like for editing video) - make sure that all screws are tight for better heat transfer, especially undek the ketboard - blow air on the L100 with a fan or if too hot, right into the PCMCIA slot with an aquarium aerator. I am planning to use a shell of a PCMCIA card to make some adapter for that. Okay... then in Texas, you're dealing with the heat from the ambient air temperature that the system will be exposed to just as I will be here in Florida. Had you clocked up to 266? I wonder if there would be sufficiently less less heat generated at 233 to make a better option at some point. Has anyone done the modification to 233? It looks like it may actually entail de-soldering a component? Xin's website doesn't get into just what's involved. David's site just says: Attach BF1 (pin 185) and BF2 (pin 184) to Vcc (positive voltage/Vcc). But the photo on Xin's site shows 2 Xs which I assume means breaking 2 connections, and connecting another set of solder points. I guess I'll find out when I'm in there. But I'd better hit Radio Shack and pick up some heastsink grease before I start. Thanks Konrad. Matt _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking L100 w/conductive pen
Date: Tue, 11 Mar 2003 03:51:33 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Overclocking L100 w/conductive pen Does anyone have any tips on using this conductive pen to connect the solder point? It seems all to easy and obvious I guess. Maybe clean any coating off the solder if it exists, and then just paint a trail between the two points. Da?! _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking L100 w/conductive pen
Date: Tue, 11 Mar 2003 07:31:22 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L100 w/conductive pen Argentina! I remember your post about this from last summer or fall I think Leonardo. That was the first I'd read about the pen. I suppose I could have done a lot more work in the future if I'd bought a soldering iron and solder to replace what I've got stored a half a continent away... but this just seemed like too much fun! This was a Chemtronics pen made just north of me. Matt (Shel) PS: I've got an epal from AR who's dad is really happy about the financial problems down there. His income comes in US dollars! :-D From: Leonardo Armesto [EMAIL PROTECTED] I did it, and it works great..! - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:56 AM Subject: [LIB] Overclocking L100 w/conductive pen Date: Tue, 11 Mar 2003 03:51:33 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Overclocking L100 w/conductive pen Does anyone have any tips on using this conductive pen to connect the solder point? It seems all to easy and obvious I guess. Maybe clean any coating off the solder if it exists, and then just paint a trail between the two points. Da?! _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking 100ct - the easy way
Date: Thu, 27 Feb 2003 09:16:24 -0600 From: Sherrill Martin [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100ct - the easy way 6 Date: Tue, 25 Feb 2003 05:30:44 -0500 From: Lines, Nick [EMAIL PROTECTED] Subject: [LIB] Overclocking 100ct - the easy way Folks, Thought this might be helpful for people put off by the prospect of tiny solder jobs on their 100ct mobo - I know that I was! Maplins in the UK are now selling conductive pens from Circuitworks, which deposit conductive ink. I actually bought mine from RS Electronics, as maplins didn't sell them at the time I first wanted one. I overclocked my 100 last night in around 5 minutes and all works brilliantly, with nothing hot going anywhere near my mobo. The difference is noticable in day to day use. One thing: make sure you get the fine tip pen. You can check whether everything's successful or not using the WCPUID - I can post a link (when I find it) if useful. I used Xin's diagram to overclock, which involves connecting two pads which are under the PCMCIA slots then Robert is your father's brother. Cheers, Nick. The same pen is available in the US at Altex Electronics. I used the Micro Tip version to successfully OC my 100ct to 266. Only time it has shut down was doing a complete virus scan with the Libby resting on a pillow. Duh! I also have a 40g drive which may contribute more heat. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking 100ct - the easy way
Date: Thu, 27 Feb 2003 10:24:22 EST From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100ct - the easy way In a message dated 2/27/03 8:18:35 AM Mountain Standard Time, [EMAIL PROTECTED] writes: Folks, Thought this might be helpful for people put off by the prospect of tiny solder jobs on their 100ct mobo - I know that I was! Maplins in the UK are now selling conductive pens from Circuitworks, which deposit conductive ink. I actually bought mine from RS Electronics, as maplins didn't sell them at the time I first wanted one. I overclocked my 100 last night in around 5 minutes and all works brilliantly, with nothing hot going anywhere near my mobo. The difference is noticable in day to day use. One thing: make sure you get the fine tip pen. You can check whether everything's successful or not using the WCPUID - I can post a link (when I find it) if useful. I used Xin's diagram to overclock, which involves connecting two pads which are under the PCMCIA slots then Robert is your father's brother. Cheers, Nick. The same pen is available in the US at Altex Electronics. I used the Micro Tip version to successfully OC my 100ct to 266. Only time it has shut down was doing a complete virus scan with the Libby resting on a pillow. Duh! I also have a 40g drive which may contribute more heat. This sounds good to those of us (me) to whom soldering means plumbing :-). My question is, how readily would this method of overclocking be undone? Is the painted trace easily removed once applied? Lee ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking 100ct - the easy way
Date: Thu, 27 Feb 2003 10:52:28 -0500 From: Lines, Nick [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100ct - the easy way But I've been wondering just how one would go about o/cing the L100 to 233. From Xin's page, it looks like you'd have to break a connect between the two center pairs of solder points, Yep, that looks right. Put me right off! Hence I went for 266 ;-) as that's easily un-doable if I had problems. Not having been in there, I'm not sure what it would involve. The lump is around 2mm in size. I don't know if it's a resistor or diode or whatever. You would have to desolder it IMHO, rather than just cut it or try to hack it off. I don't have the skills or steadiness of hand to attempt that. in the Florida heat, I'm wondering if this Libby is going to put up with clocking to 266. Yeah yeah rub it in why don't ya? I think many people are running this throughout the world. It *is* a risk, and only you can decide if the improved performance is worth that risk. If you're careful, it would be easy to undo the connection by just scraping off the connection that you've made. At least, that was my first backup plan. The second backup plan was to use the replacement mobo out of my spare 100ct with the slightly knackered screen :-D Cheers, Nick. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking 100ct - the easy way
Date: Tue, 25 Feb 2003 05:30:44 -0500 From: Lines, Nick [EMAIL PROTECTED] Subject: [LIB] Overclocking 100ct - the easy way Folks, Thought this might be helpful for people put off by the prospect of tiny solder jobs on their 100ct mobo - I know that I was! Maplins in the UK are now selling conductive pens from Circuitworks, which deposit conductive ink. I actually bought mine from RS Electronics, as maplins didn't sell them at the time I first wanted one. I overclocked my 100 last night in around 5 minutes and all works brilliantly, with nothing hot going anywhere near my mobo. The difference is noticable in day to day use. One thing: make sure you get the fine tip pen. You can check whether everything's successful or not using the WCPUID - I can post a link (when I find it) if useful. I used Xin's diagram to overclock, which involves connecting two pads which are under the PCMCIA slots then Robert is your father's brother. Cheers, Nick. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking 100ct - the easy way
Date: Thu, 27 Feb 2003 07:47:26 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking 100ct - the easy way Hey Nick, Last year guy from SA, either Brazil or Argentina I think, posted a message about this. Sounds sweet! But I've been wondering just how one would go about o/cing the L100 to 233. From Xin's page, it looks like you'd have to break a connect between the two center pairs of solder points, and connect the 2 on the left side inthe phono. Not having been in there, I'm not sure what it would involve. But in the Florida heat, I'm wondering if this Libby is going to put up with clocking to 266. Matt From: Lines, Nick [EMAIL PROTECTED] Folks, Thought this might be helpful for people put off by the prospect of tiny solder jobs on their 100ct mobo - I know that I was! Maplins in the UK are now selling conductive pens from Circuitworks, which deposit conductive ink. I actually bought mine from RS Electronics, as maplins didn't sell them at the time I first wanted one. I overclocked my 100 last night in around 5 minutes and all works brilliantly, with nothing hot going anywhere near my mobo. The difference is noticable in day to day use. One thing: make sure you get the fine tip pen. You can check whether everything's successful or not using the WCPUID - I can post a link (when I find it) if useful. I used Xin's diagram to overclock, which involves connecting two pads which are under the PCMCIA slots then Robert is your father's brother. Cheers, Nick. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sun, 15 Dec 2002 10:16:28 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? The results differ due to where how you decide to ground certain pins, and I think there may be a motherboard revision difference as well. In any case, the 30+ people who tried the oc using my picture - 90% or so were successful, the other 10%'s CPUs just couldn't run well at 266Mhz and had to underclock to 200/233 or back to the original speed. Remember, not all CPUs will overclock successfully. Anyways, that means the rest of the bunch are running fine with their OC'd Librettos, and so if you're Libretto MB matches my pics on silverace.com, then you've got a ~90% chance of doing it. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sun, 15 Dec 2002 15:21:31 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Hi again, Now I have my libretto overclocked to 266Mhz and with 32 MB of ram, I was wondering if I could install Windows XP in it. Could you help me with this dilema.? THANKS A LOT. PS: I read an article that says that if i modified 2 files of the windows xp CD ( txtsetup.sif RequiredMemory=33030144 and dosnet.inf MinimumMemory=33030144) The install of windows XP will be succesfull... - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Saturday, December 14, 2002 5:55 PM Subject: Re: [LIB] 100CT Overclocking ? Date: Sat, 14 Dec 2002 20:51:54 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Xin just posted a few pix with red stripes and Xs though, and no text to explain much. Overclocking to 266 is pretty simple, as it's just a matter of shorting the two solder points on the far right of the 3 pairs of points in the picture. But the procedure to o/c to 233 involves a bit more, and the process does seem to differ from the info on one site to the next. Matt From: Richard T. Waters [EMAIL PROTECTED] I would suggest you review: http://www.fixup.net/tips/l100266.htm Raúl L. Armesto wrote: Date: Sat, 14 Dec 2002 00:07:49 -0300 Hi Folks, I will try to overclock my libretto 100CT in this few days, I found 2 web pages describing the procedure of solding the circuit, but this procedures are diferent on this web pages. 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm 2- http://www.silverace.com/libretto/L100oc.jpg If anyone did this before, PLEASE, Could you tell me in which web page is the RIGHT procedure ? THANKS A LOT. Leonardo Armesto. _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Mon, 16 Dec 2002 04:57:23 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Pintura conductora de plata para reparaciones de placas electrónicas. Bueno! ¿Es aquí en Estados Unidos también, si? ---{M}--- From: Raúl L. Armesto [EMAIL PROTECTED] yes, like this: http://www.servex.com.ar/productos/soldex.html - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Sunday, December 15, 2002 4:13 AM Subject: Re: [LIB] 100CT Overclocking ? Date: Sun, 15 Dec 2002 07:08:49 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] NOTE: To bridged the 2 points in the circuit I used a special paint made of silver. Eh? ...[m] _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Mon, 16 Dec 2002 02:24:44 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Por supuesto.! En Estados Unidos también! Saludos. - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Monday, December 16, 2002 1:59 AM Subject: Re: [LIB] 100CT Overclocking ? Date: Mon, 16 Dec 2002 04:57:23 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Pintura conductora de plata para reparaciones de placas electrónicas. Bueno! ¿Es aquí en Estados Unidos también, si? ---{M}--- From: Raúl L. Armesto [EMAIL PROTECTED] yes, like this: http://www.servex.com.ar/productos/soldex.html - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Sunday, December 15, 2002 4:13 AM Subject: Re: [LIB] 100CT Overclocking ? Date: Sun, 15 Dec 2002 07:08:49 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] NOTE: To bridged the 2 points in the circuit I used a special paint made of silver. Eh? ...[m] _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sat, 14 Dec 2002 20:51:54 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? Xin just posted a few pix with red stripes and Xs though, and no text to explain much. Overclocking to 266 is pretty simple, as it's just a matter of shorting the two solder points on the far right of the 3 pairs of points in the picture. But the procedure to o/c to 233 involves a bit more, and the process does seem to differ from the info on one site to the next. Matt From: Richard T. Waters [EMAIL PROTECTED] I would suggest you review: http://www.fixup.net/tips/l100266.htm Raúl L. Armesto wrote: Date: Sat, 14 Dec 2002 00:07:49 -0300 Hi Folks, I will try to overclock my libretto 100CT in this few days, I found 2 web pages describing the procedure of solding the circuit, but this procedures are diferent on this web pages. 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm 2- http://www.silverace.com/libretto/L100oc.jpg If anyone did this before, PLEASE, Could you tell me in which web page is the RIGHT procedure ? THANKS A LOT. Leonardo Armesto. _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] 100CT Overclocking ?
Date: Sat, 14 Dec 2002 20:56:15 - From: Steven Knight [EMAIL PROTECTED] Subject: RE: [LIB] 100CT Overclocking ? I thinking of doing this to my Lib100 too. but have heard that their is some downsides like more heat, less battery life.. from someoner that has already performed this, could you give your views .. thanks -Original Message- From: Richard T. Waters [mailto:[EMAIL PROTECTED]] Sent: 14 December 2002 15:49 To: Libretto Subject: Re: [LIB] 100CT Overclocking ? Date: Sat, 14 Dec 2002 10:45:19 -0500 From: Richard T. Waters [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? I would suggest you review: http://www.fixup.net/tips/l100266.htm Raúl L. Armesto wrote: Date: Sat, 14 Dec 2002 00:07:49 -0300 From: =so-8859-1?Q?Raúl_L._Armesto?[EMAIL PROTECTED] Subject: 100CT Overclocking ? Hi Folks, I will try to overclock my libretto 100CT in this few days, I found 2 web pages describing the procedure of solding the circuit, but this procedures are diferent on this web pages. 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm 2- http://www.silverace.com/libretto/L100oc.jpg If anyone did this before, PLEASE, Could you tell me in which web page is the RIGHT procedure ? THANKS A LOT. Leonardo Armesto. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sat, 14 Dec 2002 18:24:05 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? I dit it The libretto 100ct goes to 266Mhz easily!! and (after 2 hours in use) I never felt more heat. I never knew wich is the full charge o the batery but it runs for 2 hours just fine. NOTE: To bridged the 2 points in the circuit I used a special paint made of silver. HELP COMMENTS ARE WELCOME. Bye. - Original Message - From: Steven Knight [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Saturday, December 14, 2002 5:59 PM Subject: RE: [LIB] 100CT Overclocking ? Date: Sat, 14 Dec 2002 20:56:15 - From: Steven Knight [EMAIL PROTECTED] Subject: RE: [LIB] 100CT Overclocking ? I thinking of doing this to my Lib100 too. but have heard that their is some downsides like more heat, less battery life.. from someoner that has already performed this, could you give your views thanks -Original Message- From: Richard T. Waters [mailto:[EMAIL PROTECTED]] Sent: 14 December 2002 15:49 To: Libretto Subject: Re: [LIB] 100CT Overclocking ? Date: Sat, 14 Dec 2002 10:45:19 -0500 From: Richard T. Waters [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? I would suggest you review: http://www.fixup.net/tips/l100266.htm Raúl L. Armesto wrote: Date: Sat, 14 Dec 2002 00:07:49 -0300 From: =so-8859-1?Q?Raúl_L._Armesto?[EMAIL PROTECTED] Subject: 100CT Overclocking ? Hi Folks, I will try to overclock my libretto 100CT in this few days, I found 2 web pages describing the procedure of solding the circuit, but this procedures are diferent on this web pages. 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm 2- http://www.silverace.com/libretto/L100oc.jpg If anyone did this before, PLEASE, Could you tell me in which web page is the RIGHT procedure ? THANKS A LOT. Leonardo Armesto. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sun, 15 Dec 2002 07:08:49 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] NOTE: To bridged the 2 points in the circuit I used a special paint made of silver. Eh? ...[m] _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT Overclocking ?
Date: Sun, 15 Dec 2002 04:59:22 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? yes, like this: http://www.servex.com.ar/productos/soldex.html - Original Message - From: Matthew Hanson [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Sunday, December 15, 2002 4:13 AM Subject: Re: [LIB] 100CT Overclocking ? Date: Sun, 15 Dec 2002 07:08:49 + From: Matthew Hanson [EMAIL PROTECTED] Subject: Re: [LIB] 100CT Overclocking ? From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] NOTE: To bridged the 2 points in the circuit I used a special paint made of silver. Eh? ...[m] _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] 100CT Overclocking ?
Date: Sat, 14 Dec 2002 00:07:49 -0300 From: =?iso-8859-1?Q?Ra=FAl_L._Armesto?= [EMAIL PROTECTED] Subject: 100CT Overclocking ? Hi Folks, I will try to overclock my libretto 100CT in this few days, I found 2 web pages describing the procedure of solding the circuit, but this procedures are diferent on this web pages. 1- http://home.datacomm.ch/psumesgutner/libretto/en/hardware/cpu.htm 2- http://www.silverace.com/libretto/L100oc.jpg If anyone did this before, PLEASE, Could you tell me in which web page is the RIGHT procedure ? THANKS A LOT. Leonardo Armesto. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Location of suitable Vcc point for overclocking 70CT?
Date: Sat, 7 Sep 2002 16:47:59 +0100 From: Alex Slater [EMAIL PROTECTED] Subject: Location of suitable Vcc point for overclocking 70CT? Hi, Can anyone point me towards an easily locatable and accessible location for obtaining the necessary Vcc for changing the multiplier on a 70CT? The FAQ and archive etc all have good information on locating and changing the bus speeds but nowhere mentions a suitable location for getting the Vcc. Cheers, Alex. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Location of suitable Vcc point for overclocking 70CT?
Date: Sat, 7 Sep 2002 14:59:29 -0700 (PDT) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Location of suitable Vcc point for overclocking 70CT? Can anyone point me towards an easily locatable and accessible location for obtaining the necessary Vcc for changing the multiplier on a 70CT? http://www.silverace.com/libretto/overclocking.html Note the pin table. On the L70, BF1, Pin 185 is Vcc (+). On the L70, BF0, Pin 186 is Ground. When overclocking, simply disconnect the pin(s) from their current conections, and connect as appropriate to the voltage/ground sources that used to be connected to them originally. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] 100CT overclocking (again)
Date: Wed, 1 May 2002 09:16:39 -0500 From: Lines, Nick [EMAIL PROTECTED] Subject: 100CT overclocking (again) I'm trying to find a definitive answer on overclocking the 100CT, as I'm confused. This is a fairly natural state for me to be in. :-) 200MHz seems rock stable on all machines, 233MHz seems like a good option but is a swine to do and 266MHz is not without risk. However, how do I overclock. I've looked at David's site and looked at his picture, but then the text lower down on the site says something else to what's in the picture. Dr Xin's page is good, but looks different again, saying that I have to remove a resistor for 200MHz. And finally, this Swiss page says something different again. http://home.datacomm.ch/psumesgutner/libretto/en/oc_100_c.htm Before I blow things up, what's the right way to get 200MHz, or should I just try 266MHz? And is there an easy way to get 233? Thanks, Nick. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] 100CT overclocking (again)
Date: Wed, 01 May 2002 08:29:04 -0700 (PDT) From: Kevin McClelland [EMAIL PROTECTED] Subject: Re: [LIB] 100CT overclocking (again) Lines, Nick wrote Date: Wed, 1 May 2002 09:16:39 -0500 From: Lines, Nick [EMAIL PROTECTED] Subject: 100CT overclocking (again) I'm trying to find a definitive answer on overclocking the 100CT, as I'm confused. This is a fairly natural state for me to be in. :-) 200MHz seems rock stable on all machines, 233MHz seems like a good option but is a swine to do and 266MHz is not without risk. However, how do I overclock. I've looked at David's site and looked at his picture, but then the text lower down on the site says something else to what's in the picture. Dr Xin's page is good, but looks different again, saying that I have to remove a resistor for 200MHz. And finally, this Swiss page says something different again. http://home.datacomm.ch/psumesgutner/libretto/en/oc_100_c.htm Before I blow things up, what's the right way to get 200MHz, or should I just try 266MHz? And is there an easy way to get 233? Thanks, Nick. I used Xin's instructions on his page to OC my L100 from 166 to 266 with no problems. Pretty delicate procedure though, very small and precise soldering is required. DO NOT use any soldering iron stronger than 15W, otherwise you run a risk of damaging some of the nearby resistors due to the excessive heat. Been a while since I looked at the 233 procedure though, so I cannot comment on that. I suppose if you wanted to you could send it to Xin to do, as he does perform the service. I think right now if you send it to him for his new PS2 port solution, he will do the OC at no charge. - Get your free @Elvis e-mail account at Elvis.com! http://www.elvis.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Wed, 1 May 2002 01:59:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking Best bet however for those wanting a bit more umpf from their L110s? 1) max ram to 64MB. It'll make it run as fast as it possibly can. 2) replace HD with 30+GB 9.5mm HD. The latest HDs transfer data far quicker than the ol' 3GB HD on the L110, and that alone will make your L110 feel quite snappy. bigger 2MB cache buffers also do wonders for snappiness and performance on the L110. 3) defrag completely with a good disk defragmenter like Norton Speed Disk. (minor, esp. on a newely setup system, so don't bother with this unless you've got time and money to waste). 4) Windows 98SE or lower. Anything higher will kill system performance. Turn off 'display icons in all colors', use 16-bit display mode, turn off animated menus, turn the background to pure black, etc. will keep the OS running as quickly as possible w/o lagging due to silly shadows and animations. 98lite.net if needed to squeeze out extra performance. With maxed out ram, 30GB HD, and Win98SE optimized, my L110 is running quite snappily for the most part and does a great job as a portable laptop. My 2 Cents / Sen / Ringgit / Kip / Pennies / whatever: - I've always had 64MB in my L110 (Win'98) - used it for two years, defragged regularly - then upgraded to a 30MB HDD with Win'2K I know it's subjective, but... I have to say, it's definitely faster with Win'2K and the 30GB HDD than it is with Win'98 and the 4.3GB HDD. As well as all the other advantages (I don't think I've found a disadvantage yet), it even boots faster... I've still got Win'98 on the old HDD and on the odd occasions I've popped it back in, it makes me smile by reminding me what a tremendous improvement has taken place. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Tue, 30 Apr 2002 14:10:18 -0700 (PDT) From: Kevin McClelland [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking On Tue, 30 April 2002, [EMAIL PROTECTED] wrote Date: Wed, 1 May 2002 01:59:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking Best bet however for those wanting a bit more umpf from their L110s? 1) max ram to 64MB. It'll make it run as fast as it possibly can. 2) replace HD with 30+GB 9.5mm HD. The latest HDs transfer data far quicker than the ol' 3GB HD on the L110, and that alone will make your L110 feel quite snappy. bigger 2MB cache buffers also do wonders for snappiness and performance on the L110. 3) defrag completely with a good disk defragmenter like Norton Speed Disk. (minor, esp. on a newely setup system, so don't bother with this unless you've got time and money to waste). 4) Windows 98SE or lower. Anything higher will kill system performance. Turn off 'display icons in all colors', use 16-bit display mode, turn off animated menus, turn the background to pure black, etc. will keep the OS running as quickly as possible w/o lagging due to silly shadows and animations. 98lite.net if needed to squeeze out extra performance. With maxed out ram, 30GB HD, and Win98SE optimized, my L110 is running quite snappily for the most part and does a great job as a portable laptop. My 2 Cents / Sen / Ringgit / Kip / Pennies / whatever: - I've always had 64MB in my L110 (Win'98) - used it for two years, defragged regularly - then upgraded to a 30MB HDD with Win'2K I know it's subjective, but... I have to say, it's definitely faster with Win'2K and the 30GB HDD than it is with Win'98 and the 4.3GB HDD. As well as all the other advantages (I don't think I've found a disadvantage yet), it even boots faster... I've still got Win'98 on the old HDD and on the odd occasions I've popped it back in, it makes me smile by reminding me what a tremendous improvement has taken place. I would agree. I never had Win98 on mine, only Win95 when I first bought it, then Win2k after that. On the old 2.1gb, it was pretty slow, especially in Win2k. The OC helped some, but the real change came when I put in the IBM 30gb HDD. That 2mb cache and faster access time really helped a lot. Since I maintain dual boot with Win95 and Win2k, I can say that Win95 will boot very quickly, almost as fast as a resume from hibernation. It is also pretty quick with apps while running. Win2k, although faster on boot than before on the old drive, still takes a little more time. Hibernation is pretty quick though, and there is very little disk access at idle. - Get your free @Elvis e-mail account at Elvis.com! http://www.elvis.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 01:08:20 -0500 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking What's the front side buss speed- if I might ask? Are you doing your tests on battery or ac power? wouldn't battery power slow it down along with the cpu if you are using power savings? I wouldn't send attachments to the list- a lot of people find them annoying to download. Just mention you have them and put them on a web page or email them to people that request them. On 28 Apr 2002, at 21:29, Gennadiy Tsygan wrote: Date: Mon, 29 Apr 2002 00:17:27 -0400 From: Gennadiy Tsygan [EMAIL PROTECTED] Subject: Overclocking I am thinking about oveclockin L110 by increasing a front side bus speed. I found a datasheet for a timer chip. http://www.cypress.com/cfuploads/img/products/38-07211.pdf Output frequency is adjustable by applying logical 1 or 0 on three selector pins. I don't know much about mobile processors, but I thought they are fairly similar to the desktop ones. So I expected to find bas speed of 66MHz. When I looked on the board of the L110 I found that pull-up resistors are set for FSB speed of 40MHz. Any ideas what it means? I made pictures of the board and can post them if anyone is interested. By the way, can I attach pictures on this list? - Original Message - From: [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Sunday, April 28, 2002 10:06 PM Subject: [LIB] Taking the battery apart Date: Sun, 28 Apr 2002 21:06:28 -0500 From: [EMAIL PROTECTED] Subject: Taking the battery apart Does anyone have a good method for cracking the battery case? I got mine half opened then I cracked the cover. I tried prying it open with a knife blade. It's not working very well. Its very tightly glued. Is there an easier way? TIA John ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 18:54:55 GMT From: Alan Middleton [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking Does Adorable Libretto cover overclocking 110s ? Last time I looked it only documented up to 100 in English, and I've never been brave enough to see if they apply (ie not even to crack open the case and see if it looks similar) I'd be interested in any info wrt 110s especially if tested and working on someone else's machine first ;) Contact me off list as opposed to posting files. Kind regards, Alan. Date: Mon, 29 Apr 2002 13:25:12 +0800 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking At 09:52 PM 28/04/2002 -0700, you wrote: Date: Mon, 29 Apr 2002 11:48:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking By the way, can I attach pictures on this list? You *can*, but PLEASE DON'T! :-) I believe there is a size limit, and that it's small, but I don't know for sure. Much better to link if at all possible, PLEASE PLEASE PLEASE. Actually, IIRC the list engine strips the attachments off ... But these things aside, I believe the Adorable Libretto site run by David at http://www.silverace.com/libretto/ has links to all the overclocking info you're likely to need ... - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net| | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 18:11:36 -0700 (PDT) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking L110 is identical to L100 for the overclocking. Only the jumpers initially closed on the L110 is different vs. the L100 (because they've been jumpered to run at different speeds). Xin's fixup.net site has his take on overclocking the L1xx series, but otherwise, those who have overclocked L100's and L110's using my site have no problems thus far. 90% success rate over 40+ people who have done the overclocking; the other 10% have had to undo it because the CPU simply can't take it. But as for another 33 Mhz on the L110, I'd say it's not even worth the trouble of taking apart a L110, overclocking it, and then seeing if you've killed it or not. For the L100, certainly because you can turn it into a very useable machine after overclocking, esp. given the low-low pricing today on Ebay.com. Best bet however for those wanting a bit more umpf from their L110s? 1) max ram to 64MB. It'll make it run as fast as it possibly can. 2) replace HD with 30+GB 9.5mm HD. The latest HDs transfer data far quicker than the ol' 3GB HD on the L110, and that alone will make your L110 feel quite snappy. bigger 2MB cache buffers also do wonders for snappiness and performance on the L110. 3) defrag completely with a good disk defragmenter like Norton Speed Disk. (minor, esp. on a newely setup system, so don't bother with this unless you've got time and money to waste). 4) Windows 98SE or lower. Anything higher will kill system performance. Turn off 'display icons in all colors', use 16-bit display mode, turn off animated menus, turn the background to pure black, etc. will keep the OS running as quickly as possible w/o lagging due to silly shadows and animations. 98lite.net if needed to squeeze out extra performance. With maxed out ram, 30GB HD, and Win98SE optimized, my L110 is running quite snappily for the most part and does a great job as a portable laptop. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 23:21:05 -0400 From: Gennadiy Tsygan [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking But as for another 33 Mhz on the L110, I'd say it's not even worth the trouble of taking apart a L110, overclocking it, and then seeing if you've killed it or not. 233 MHz CPU is almost guaranteed to work at 266. It is not much faster, but battery life penalty is neglidgable and you know the feeling when after you change the oil, car seems to run better? This what I feel now with overclocked L110! Still, would be nice to go faster, but nobody seems to know about bus speed hack and I am somewhat reluctant to experiment because parts inside are so small, they are almost impossible to solder. Best bet however for those wanting a bit more umpf from their L110s? 1) max ram to 64MB. It'll make it run as fast as it possibly can. 2) replace HD with 30+GB 9.5mm HD. The latest HDs transfer data far quicker than the ol' 3GB HD on the L110, and that alone will make your L110 feel quite snappy. bigger 2MB cache buffers also do wonders for snappiness and performance on the L110. 3) defrag completely with a good disk defragmenter like Norton Speed Disk. (minor, esp. on a newely setup system, so don't bother with this unless you've got time and money to waste). Well, I am running Win XP for the following reasons: 1 Clear type fonts- looks so much better on LCD, you wouldn't want to go back! 2 Built-in CPU idling- very important for overclocked CPU 3 No problems with standby or hibernation 4 Hardware support- recognized everything I have, including old IBM PCMCIA CD-ROM 5 Reasonably fast if you remove some niceties from the GUI. 6 More and better features than 98 4) Windows 98SE or lower. Anything higher will kill system performance. Turn off 'display icons in all colors', use 16-bit display mode, turn off animated menus, turn the background to pure black, etc. will keep the OS running as quickly as possible w/o lagging due to silly shadows and animations. 98lite.net if needed to squeeze out extra performance. Why black background? I think any color will do just fine as long as you don't use a BMP file. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking
Date: Mon, 29 Apr 2002 00:17:27 -0400 From: Gennadiy Tsygan [EMAIL PROTECTED] Subject: Overclocking I am thinking about oveclockin L110 by increasing a front side bus speed. I found a datasheet for a timer chip. http://www.cypress.com/cfuploads/img/products/38-07211.pdf Output frequency is adjustable by applying logical 1 or 0 on three selector pins. I don't know much about mobile processors, but I thought they are fairly similar to the desktop ones. So I expected to find bas speed of 66MHz. When I looked on the board of the L110 I found that pull-up resistors are set for FSB speed of 40MHz. Any ideas what it means? I made pictures of the board and can post them if anyone is interested. By the way, can I attach pictures on this list? - Original Message - From: [EMAIL PROTECTED] To: Libretto [EMAIL PROTECTED] Sent: Sunday, April 28, 2002 10:06 PM Subject: [LIB] Taking the battery apart Date: Sun, 28 Apr 2002 21:06:28 -0500 From: [EMAIL PROTECTED] Subject: Taking the battery apart Does anyone have a good method for cracking the battery case? I got mine half opened then I cracked the cover. I tried prying it open with a knife blade. It's not working very well. Its very tightly glued. Is there an easier way? TIA John ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 11:48:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking By the way, can I attach pictures on this list? You *can*, but PLEASE DON'T! :-) I believe there is a size limit, and that it's small, but I don't know for sure. Much better to link if at all possible, PLEASE PLEASE PLEASE. Hundreds of people will get your message. How many have a 110 and want to overclock it? Some of them (such as me) have extremely slow Internet access, and yet have to pay an inordinate amount for it. Thank you very much. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 13:25:12 +0800 From: Raymond [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking At 09:52 PM 28/04/2002 -0700, you wrote: Date: Mon, 29 Apr 2002 11:48:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking By the way, can I attach pictures on this list? You *can*, but PLEASE DON'T! :-) I believe there is a size limit, and that it's small, but I don't know for sure. Much better to link if at all possible, PLEASE PLEASE PLEASE. Actually, IIRC the list engine strips the attachments off ... But these things aside, I believe the Adorable Libretto site run by David at http://www.silverace.com/libretto/ has links to all the overclocking info you're likely to need ... - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net| | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking
Date: Mon, 29 Apr 2002 06:01:57 + From: neil barnes [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking Date: Mon, 29 Apr 2002 11:48:23 +0700 From: [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking By the way, can I attach pictures on this list? You *can*, but PLEASE DON'T! :-) I believe there is a size limit, and that it's small, but I don't know for sure. Much better to link if at all possible, PLEASE PLEASE PLEASE. Hundreds of people will get your message. How many have a 110 and want to overclock it? Some of them (such as me) have extremely slow Internet access, and yet have to pay an inordinate amount for it. Thank you very much. Seconded. If possible, a link is much better. People behind company firewalls may find that large attachments simply vanish, and Hotmail (and I assume others) will get posts deleted if they exceed the mailbox size...sadly, it's the oldest that go first, not the one that causes the problem. Neil _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. ** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] Overclocking the L100
Date: Thu, 28 Feb 2002 09:25:56 - From: [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking the L100 Installed AMN refridgerator this morning and seems to be doing its stuff... i was just wondering if any1 had tried rain on Lib100 ?? Kevin. -Original Message- From: David Chien [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 27, 2002 19:42 To: Libretto Subject: Re: [LIB] Overclocking the L100 Date: Wed, 27 Feb 2002 11:33:48 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking the L100 Based on the past 20-30 replies to me, about 90% of overclockers succeeded at getting theirs to run at 266Mhz w/o any problems at all. Guess you're part of the 10% that'll have to undo or underclock to 200/233Mhz.. Use thermal grease between CPU and heatsink, run AMN Refridgerator or CPUIdle if you dont' have NT/2K/XP/Linux running (built-into these), and give it a whirl. Unfortunately, not all L100s can be overclocked successfully = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] Overclocking the L100
Date: Thu, 28 Feb 2002 16:49:03 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking the L100 Installed AMN refridgerator this morning and seems to be doing its stuff... i was just wondering if any1 had tried rain on Lib100 ?? People have. See List archives. In general, from what I've tested, two programs stand out for stability and just works: 1) AMD Refridgerator. Very small program, so compact, takes almost no RAM or HD space. Excellent and works well. 2) CPUIdle. More CPU monitoring features, tray icon, but otherwise, does the exact same thing as #1, but you have to pay. Figure go #1 for cheap light. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] Overclocking the L100
Date: Fri, 01 Mar 2002 07:26:56 From: neil barnes [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking the L100 Date: Fri, 01 Mar 2002 06:11:04 + From: Matthew Hanson [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking the L100 Is Amhlt (sp?) still around? I recall that used to be Neil's favorite. An old version is still on my web site: www.nbarnes.easynet.co.uk/Binaries/amnhltm.zip I dunno if it's been updated, hard to see how :) Neil _ Chat with friends online, try MSN Messenger: http://messenger.msn.com ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking the L100
Date: Wed, 27 Feb 2002 08:42:05 + From: Cerulean Skies [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking the L100 From: Raymond [EMAIL PROTECTED] Hi all! OK after my overheating experiences with my L50 clocked to 100, I figured I'd better ask first this time ... Has anyone been able to clock their L100 and not have it overheat when the ambient temperature hits about 25ºC-30ºC and if so, what speed was it stable at? I'd *like* to get it to 233 by reconfiguring those solder bumps on the bottom of the motherboard but I don't really wanna go back to the stand-on-end-with-desk-fan setup I had to use with my old L50 ... going from 166 to 200 seems a little pointless and 266 is a definite overheat round here ... heh Hmm, I'm not sure how often my Lib was out in the full heat in the summer, but I do know that I've had no overheat problems with it, o/c'd to 266. (I'm in Los Angeles, so it does get cozy here in the summer.) Shultz _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Re: [LIB] Overclocking the L100
Date: Wed, 27 Feb 2002 11:33:48 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: [LIB] Overclocking the L100 Based on the past 20-30 replies to me, about 90% of overclockers succeeded at getting theirs to run at 266Mhz w/o any problems at all. Guess you're part of the 10% that'll have to undo or underclock to 200/233Mhz.. Use thermal grease between CPU and heatsink, run AMN Refridgerator or CPUIdle if you dont' have NT/2K/XP/Linux running (built-into these), and give it a whirl. Unfortunately, not all L100s can be overclocked successfully = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
[LIB] Overclocking the L100
Date: Wed, 27 Feb 2002 14:35:28 +0800 From: Raymond [EMAIL PROTECTED] Subject: Overclocking the L100 Hi all! OK after my overheating experiences with my L50 clocked to 100, I figured I'd better ask first this time ... Has anyone been able to clock their L100 and not have it overheat when the ambient temperature hits about 25ºC-30ºC and if so, what speed was it stable at? I'd *like* to get it to 233 by reconfiguring those solder bumps on the bottom of the motherboard but I don't really wanna go back to the stand-on-end-with-desk-fan setup I had to use with my old L50 ... going from 166 to 200 seems a little pointless and 266 is a definite overheat round here ... heh - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net| | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
RE: [LIB] Overclocking the L100
Date: Wed, 27 Feb 2002 08:00:10 - From: [EMAIL PROTECTED] Subject: RE: [LIB] Overclocking the L100 266 fine here.. run it for several hours a day. Gets very slightly warm around middle of keyboard but definately nothing to worry about. I used some thermal paste next to the CPU. -Original Message- From: Raymond [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 27, 2002 06:42 To: Libretto Subject: [LIB] Overclocking the L100 Date: Wed, 27 Feb 2002 14:35:28 +0800 From: Raymond [EMAIL PROTECTED] Subject: Overclocking the L100 Hi all! OK after my overheating experiences with my L50 clocked to 100, I figured I'd better ask first this time ... Has anyone been able to clock their L100 and not have it overheat when the ambient temperature hits about 25ºC-30ºC and if so, what speed was it stable at? I'd *like* to get it to 233 by reconfiguring those solder bumps on the bottom of the motherboard but I don't really wanna go back to the stand-on-end-with-desk-fan setup I had to use with my old L50 ... going from 166 to 200 seems a little pointless and 266 is a definite overheat round here ... heh - Raymond --- /~\ | | Does fuzzy logic tickle?| | ___ | My HDD has no reverse. How do I backup? | | /__/ +---| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net| | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~/ ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest ** ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---TO UNSUBSCRIBE--- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe TO UNSUBSCRIBE DIGEST-- Do above but with this on subject line: cmd:unsubscribe digest **
Overclocking a 110CT
Date: Tue, 24 Jul 2001 08:08:10 -0400 From: [EMAIL PROTECTED] Subject: Overclocking a 110CT Hi Has anyone overclocked a 110CT? If so, so what speed? TIA Jon C -- Pop3Now Personal, Manage 5 Email Accounts From 1 Secure Window Sign Up Today! Visit http://www.pop3now.com/personal ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking a 110CT
Date: Tue, 24 Jul 2001 10:10:49 -0700 (PDT) From: David Chien [EMAIL PROTECTED] Subject: Re: Overclocking a 110CT Has anyone overclocked a 110CT? If so, so what speed? Many people have - a few dozen at least from my memory. 266Mhz is the fastest they're running at. Most are successful and run w/o any problems. About 90% of the time. The other 10% must undo the operation, or wind up with a dead Libretto. = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking Libretto 100
Date: Thu, 8 Feb 2001 11:21:27 -0800 (PST) From: David Chien [EMAIL PROTECTED] Subject: Re: Overclocking Libretto 100 It works. Dozens of people have successfully done the upgrade. See my Overclocking Article on my site below as well! Good luck! = adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking Libretto 100
Date: Tue, 6 Feb 2001 20:08:20 - From: "Dave's Libretto" [EMAIL PROTECTED] Subject: Re: Overclocking Libretto 100 - Original Message - From: "Lolos Hardware" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Tuesday, February 06, 2001 7:47 PM Subject: Overclocking Libretto 100 I wan to overclock my libretto 100 to 266mhz using xin guide but i need to know if anyone success de procedure . Realy works at 266MHZ ??? I managed to get it working at 266MHz just fine using Xin's info. Just make sure you run Rain all the time to cool the cpu down when not in use. It makes a HUGE difference to the temperature of the machine. If it doesnt work at 266, try taking it down to 233. It all depends on the processor and maybe revision (were there different revisions of the 100?) of the machine as to whether or not you will get it to run without crashes at 266. Cheers Dave ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking Libretto 100
Date: Tue, 6 Feb 2001 16:11:23 -0500 From: "Lawrence Young" [EMAIL PROTECTED] Subject: Re: Overclocking Libretto 100 - Original Message - From: "Dave's Libretto" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Tuesday, February 06, 2001 3:07 PM Subject: Re: Overclocking Libretto 100 Date: Tue, 6 Feb 2001 20:08:20 - From: "Dave's Libretto" [EMAIL PROTECTED] Subject: Re: Overclocking Libretto 100 - Original Message - From: "Lolos Hardware" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Tuesday, February 06, 2001 7:47 PM Subject: Overclocking Libretto 100 I wan to overclock my libretto 100 to 266mhz using xin guide but i need to know if anyone success de procedure . Realy works at 266MHZ ??? I managed to get it working at 266MHz just fine using Xin's info. Just make sure you run Rain all the time to cool the cpu down when not in use. It makes a HUGE difference to the temperature of the machine. If it doesnt work at 266, try taking it down to 233. It all depends on the processor and maybe revision (were there different revisions of the 100?) of the machine as to whether or not you will get it to run without crashes at 266. I can only get to 200 but it's very stable. I run Win2000 so there is no need to run stuff like RAIN. Lawrence ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking Libretto 100
Date: Tue, 06 Feb 2001 20:09:36 EST From: [EMAIL PROTECTED] Subject: Re: Overclocking Libretto 100 What is 'Rain' software to cool down a cpu? ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking
Date: Sun, 17 Dec 2000 09:44:01 -0400 From: "Ian C. Melville" [EMAIL PROTECTED] Subject: Re: Overclocking Hi Bill, How's the heat and stability of the 100ct @266 in your opinion? Do you have to use a cpu cooler? Are you running 32 or 64ram? Thanks! Regards, Ian C. Melville FRONTLINE MARKETING AGENCIES Trinidad, West Indies - Original Message - From: "Bill Photinos" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Saturday, December 16, 2000 12:33 PM Subject: Re: Overclocking Date: Sat, 16 Dec 2000 11:29:33 -0500 From: Bill Photinos [EMAIL PROTECTED] Subject: Re: Overclocking Brian O'Callaghan-Westropp wrote: Date: Sat, 16 Dec 2000 16:07:09 - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] Subject: Overclocking How do you overclock a Libretto 100? check out. http://www.silverace.com/libretto/overclocking.html I followed the instructions and my CT100 is now running at 266Mhz. All I had to do was solder one jumper. No Guarantees Standard Disclaimers apply. ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking
Date: Sun, 17 Dec 2000 14:51:43 - From: "Jon Crawford" [EMAIL PROTECTED] Subject: Re: Overclocking Who overclocked a Libretto 110 and to what speed? Thanks Jon - Original Message - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Saturday, December 16, 2000 4:08 PM Subject: Overclocking Date: Sat, 16 Dec 2000 16:07:09 - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] Subject: Overclocking How do you overclock a Libretto 100? Cheers Brian ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking
Date: Sun, 17 Dec 2000 10:19:36 -0500 From: Bill Photinos [EMAIL PROTECTED] Subject: Re: Overclocking "Ian C. Melville" wrote: Date: Sun, 17 Dec 2000 09:44:01 -0400 From: "Ian C. Melville" [EMAIL PROTECTED] Subject: Re: Overclocking Hi Bill, How's the heat and stability of the 100ct @266 in your opinion? Do you have to use a cpu cooler? Are you running 32 or 64ram? Thanks! I use it with the docking station so there is some air flow under the unit. Have noticed no heat related problem as of yet. Have also upgraded to 64M Ram. No CPU cooler. Have left it plugged in and running at my desk with a 10/100 network card and modem inserted. These get a bit warm but have had no thermal shutdowns. Bill - Original Message - From: "Bill Photinos" [EMAIL PROTECTED] To: "Libretto" [EMAIL PROTECTED] Sent: Saturday, December 16, 2000 12:33 PM Subject: Re: Overclocking Date: Sat, 16 Dec 2000 11:29:33 -0500 From: Bill Photinos [EMAIL PROTECTED] Subject: Re: Overclocking Brian O'Callaghan-Westropp wrote: Date: Sat, 16 Dec 2000 16:07:09 - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] Subject: Overclocking How do you overclock a Libretto 100? check out. http://www.silverace.com/libretto/overclocking.html I followed the instructions and my CT100 is now running at 266Mhz. All I had to do was solder one jumper. No Guarantees Standard Disclaimers apply. ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Overclocking
Date: Sat, 16 Dec 2000 16:07:09 - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] Subject: Overclocking How do you overclock a Libretto 100? Cheers Brian ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Re: Overclocking
Date: Sat, 16 Dec 2000 11:29:33 -0500 From: Bill Photinos [EMAIL PROTECTED] Subject: Re: Overclocking Brian O'Callaghan-Westropp wrote: Date: Sat, 16 Dec 2000 16:07:09 - From: "Brian O'Callaghan-Westropp" [EMAIL PROTECTED] Subject: Overclocking How do you overclock a Libretto 100? check out. http://www.silverace.com/libretto/overclocking.html I followed the instructions and my CT100 is now running at 266Mhz. All I had to do was solder one jumper. No Guarantees Standard Disclaimers apply. regards, Bill ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **
Overclocking service
Date: Mon, 14 Aug 2000 14:37:49 -0400 From: "E. Smith" [EMAIL PROTECTED] Subject: Overclocking service I just wanted to tell my friends of the Libretto list that Xin Feng (fixup.net, of course) is offering overclocking services for Lib's. I'm going to overclock my L50 soon. This might have already been posted to the list. My apologies if this is a duplicate post. -e. ** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ ---UNSUBSCRIBE--- mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe UNSUBSCRIBE DIGEST-- Use above but add DIGEST to the subject line... **