RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Sven Constable]

You'r e right about the size, Matt. I should have said "release", not 
installer. That was inaccurately expressed. When I looked at the rar archives 
it was about 460MBs uncompressed but that included documentation as well as the 
Irix version. 

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Matt Lind
Sent: Sunday, January 5, 2020 10:02 PM
To: softimage@listproc.autodesk.com
Subject: RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

As for choice of 2015 vs. 2014.  It depends on your needs.

 

If stability is important or you work with real time content heavily, you’ll 
want 2014 SP2.  

2015 has more features, but also more bugs including regressions from 2014 in 
the area of authoring content for games and similar workflow.  The known 
limitations list provided with the release is not comprehensive.

 

I have the XSI v1.0 installer right here at my desk.  It’s 29 Mb, not 460 Mb.  
That’s for software alone, not content databases or documentation.  For 
comparison, Softimage|3D v3.9.2 was released with XSI v1.0, and it’s installer 
was only 86 Mb inclusive of all features.  I wouldn’t call XSI bare metal code 
as anything with a Microsoft COM/OLE core is anything but bare to the metal.  I 
would say it was rather bare on features, however ;-) (e.g. no polygon 
modeling).

 

Here’s a breakdown of installer sizes through the years.  I don’t have every 
release, but I have enough to illustrate the trend.  Assume 32 bit unless 
stated otherwise:

 

XSI 1.0: 29 Mb

XSI 1.53: 31 Mb

XSI 2.01: 83 Mb

XSI 2.03: 82 Mb

XSI 3.01: 103 Mb

XSI 3.5: 118 Mb

XSI 3.5.1.1: 118 Mb

XSI 4.0: 183 Mb

XSI 4.2: 185 Mb

XSI 5.0: 349 Mb

XSI 5.11: 372 Mb

XSI 6.01: 397 Mb

XSI 6.5: 406 Mb

XSI 7.0: 479 Mb

XSI 7.01: 477 Mb

XSI 7.5: 551 Mb

Softimage 2011 SP1: 1.08 Gb

Softimage 2013 SP1: 1.44 Gb

Softimage 2014 SP2: 1.42 Gb (64 bit)

Softimage 2015: 808 Mb (64 bit)

Softimage 2015 SP1: 809 Mb (64 bit)

Softimage 2015 SP2: 809 Mb (64 bit)

 

Notice some service packs were smaller than the main release.

 

Matt

 

 

 

 

 

Date: Sun, 5 Jan 2020 00:07:22 +0100 

From: “Sven Constable” sixsi_l...@imagefront.de 

Subject: RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

To: "'Official Softimage Users Mailing List.

20 gigs of texture data?

As a sidenode the XSI 1.0 installer had about 460MB, so it roughly doubled in 
size over the years. Yes, very compact compared to 3ds max for example. It was 
never crammed with third party stuff, loads of textures and stuff. Just some 
bare metal, very fine code. ;)

  
<https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch-2BwSLMAIA8-2B-2Fai7Was5M7NUgkRPlvtBVWECuMBMaQ6RLkkQsPKQsWTDamTO8MR8pff-2F8FLBJc1lH4mNjKS3QK5jHleo-2FyBMsLGgoqi8C705Jz-2FCC4lUWDR0WxfcKEi-2BZ4F9OHpP9qvxnluyDgSE9Vg7idxgEbkoN6JHvE1nXz5qxWcj11ch5yRqB4hS6Q1r93RO6nWnX5hWYHEZndnm6lwjMwW2um-2B4o587t8Dzs8HZgRdvQ9pgumkISKEllxLdc49TreA8DeCf2AuG7JGNSvV6F8Iqu-2B1JqZ2zaYXSRtph2byLnnYnjsmWpjdeU4-2BiaDtLwhBRDA9rWynV5EcyAdf8dorn-2BQrj-2BkIN738hL0SJeODAB-2Bp3BfY27JN3l-2F0H55lTD0xBGPz4-2Blwld4v2oKbxp0p6VAXvuIpO6XcLt3Ya6TdOqaX5oy0TXr2xNrhlLBBMf9BwG5qQesH3xdDMej8NVaXy-2FUw5ZObxkEj9E66yTe9ZQNAAn5R-2F9Po5uar0CM9B5kANBmQBNI0f4zS7MJUWCsvM9fvxlLYmR5mNM-2FdBwisWd288R4s-2FaGB3EbnsB0fm6R63TmSJ-2Bv-2FVDx4CIfO6wKagbJCV1iC312tNlZtOlI0D9EJSZ6HxEEWZqEr7tt7J3M41z-2BUc8Z-2FxFGF0maFrOe3ibIYhvfg5cPq79GnVV-2FdzuBk2I0q9Q-2B0eEwJjY5gQkGZfiWGOCJPnS0uxyBWg-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8LpxVsvE-2BEJf-2FpXlLHD9Q9x7zS-2FYZ7-2FCAkuGJ-2F9b1BCbb3mvqdQ40ei3rXG9hExOHGTcny9wiDBn2sPqzsKE5LucoSglpJvBdz-2B-2FKKtUdjG8kjQNEvKE6JoC7EngETK9cE8wRR2BBBut0FEXp-2BuJ2N4vY9Clo00OJSbo2FJ8y7C8eWrfbhUFd7-2FgNJGzpXtvmS17P6NIGgi-2FUmmA-2BmtRu
 > 

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Matt Lind]

As for choice of 2015 vs. 2014.  It depends on your needs.

If stability is important or you work with real time content heavily, you’ll 
want 2014 SP2.
2015 has more features, but also more bugs including regressions from 2014 in 
the area of authoring content for games and similar workflow.  The known 
limitations list provided with the release is not comprehensive.

I have the XSI v1.0 installer right here at my desk.  It’s 29 Mb, not 460 Mb.  
That’s for software alone, not content databases or documentation.  For 
comparison, Softimage|3D v3.9.2 was released with XSI v1.0, and it’s installer 
was only 86 Mb inclusive of all features.  I wouldn’t call XSI bare metal code 
as anything with a Microsoft COM/OLE core is anything but bare to the metal.  I 
would say it was rather bare on features, however ;-) (e.g. no polygon 
modeling).

Here’s a breakdown of installer sizes through the years.  I don’t have every 
release, but I have enough to illustrate the trend.  Assume 32 bit unless 
stated otherwise:

XSI 1.0: 29 Mb
XSI 1.53: 31 Mb
XSI 2.01: 83 Mb
XSI 2.03: 82 Mb
XSI 3.01: 103 Mb
XSI 3.5: 118 Mb
XSI 3.5.1.1: 118 Mb
XSI 4.0: 183 Mb
XSI 4.2: 185 Mb
XSI 5.0: 349 Mb
XSI 5.11: 372 Mb
XSI 6.01: 397 Mb
XSI 6.5: 406 Mb
XSI 7.0: 479 Mb
XSI 7.01: 477 Mb
XSI 7.5: 551 Mb
Softimage 2011 SP1: 1.08 Gb
Softimage 2013 SP1: 1.44 Gb
Softimage 2014 SP2: 1.42 Gb (64 bit)
Softimage 2015: 808 Mb (64 bit)
Softimage 2015 SP1: 809 Mb (64 bit)
Softimage 2015 SP2: 809 Mb (64 bit)

Notice some service packs were smaller than the main release.

Matt





Date: Sun, 5 Jan 2020 00:07:22 +0100
From: “Sven Constable” sixsi_l...@imagefront.de<mailto:sixsi_l...@imagefront.de>
Subject: RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015
To: "'Official Softimage Users Mailing List.

20 gigs of texture data?

As a sidenode the XSI 1.0 installer had about 460MB, so it roughly doubled in 
size over the years. Yes, very compact compared to 3ds max for example. It was 
never crammed with third party stuff, loads of textures and stuff. Just some 
bare metal, very fine code. ;)
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Sven Constable]

20 gigs of texture data?

 

As a sidenode the XSI 1.0  installer had about 460MB, so it roughly doubled in 
size over the years. Yes, very compact compared to 3ds max for example. It was 
never crammed with third party stuff, loads of textures and stuff. Just some 
bare metal, very fine code. ;)

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Pierre Schiller
Sent: Saturday, January 4, 2020 11:11 PM
To: Official Softimage Users Mailing List. 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH980GQQroK09o6z6-2Brm5kNjKYxyJ-2FdCol7tebcVWM7-2FG2LJW-2F5eax7AR9ehW9194zhXZcDBjzAMNAEuNah0tHvwJTRn71qj4B-2BiDFh8RVE-2FnPuzooA8p7550vatPs7b630g-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8HlOIf3Lu0Ti-2Fr7mNWK0nnaTKw0hugMFzzhJI3yjk5qG5Guj3DLggSw7iVA8-2Bn4akCOo4mO7zUKwb1-2FPEq-2B-2B8oluuopvWhtId9-2BrbrIfRTVtzU0KnCUzoX9ePklzKbW39liij7oRNG2quxuk2ITy2F90XUny-2FxKJmMbNBqw9QgUvGGZZajLylAAK7ShwHTAf2oIlRrELbXr9EGejFhp3m
 
Subject: Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

OH MY! Almost 800Mb. Even for this time it's a "light weight download".

Could you believe Unreal engine (out of the box install) takes 30 GB?

 

 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNcheFfpiVb5gBjGpm0Nj5Q4I-2FEkbgYMLPK5QvZZt8uottDLih-2BJeeuPV5lW3fMoI9Lu-2B53c77LmTycan03Qo6RkzhbelQxkFdvOS2Ii8qkjBIZYBGG7iMVYX2-2FQ09q5JLl16nD8AaemL9VgjEL8GRdeyX3K6tE5BPK7-2B-2BqrIIO6lDJMKazfhPmQ3Zrzcj-2FxfPXmsb9IKW1oIllQLY8asGgz-2Bs6WjoAoTOIA-2FI8J43oBOHBU5Y0PzLUyD6sNvvOxfgSwW-2BRAG3xh5oSaZvpWLY-2F2DcxSOS51wk33eO1GvR-2FXtlBUYYYq84Kt1wtHW9BldeSa_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8HlOIf3Lu0Ti-2Fr7mNWK0nnaTKw0hugMFzzhJI3yjk5lF-2FF-2BW-2Ba0oj4KSOIlvottbtX5ivaYi0TJCVYJaUOyxSvUGrniSnZn-2FkI-2Bf8YLanenkNoYh-2FKlNOiWH-2BYXbQ-2FTmfKOLG6Zh6NbqenL9cnUO-2BQEjyclBr2NQaw-2FV6B9JmyscdtKwRGx9IHL-2BXspSPPVx-2BifgJSHN0khuhmWaVMuxq
  - 3D.VFX.Post - Click on socials:



 

 

On Sat, Jan 4, 2020 at 3:55 PM F Sanchez  wrote:

well that just saved me some time. A billion CGI thank you's Sven!!!


https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8zVM9fs22Yxr0u208aqSH-2FhMgPjsGOb2iRBIEU3Zvrds-2FITDCp2BjPvuZvtnTbfuw-2F6U1m7SATVn3OrBaYT5-2Bsk2p3ibFejRENr2oBMBDBe-2FbLAR-2B55ihMuRmkw8jvOT-2F_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8HlOIf3Lu0Ti-2Fr7mNWK0nnaTKw0hugMFzzhJI3yjk5nfC6ttVmxFR3LrVJBWr9-2FZ6ah-2BLzdMhmGygJ5dRCb1RaWj5rPg8QhiDofeFRnxJ8f6Wuaptq6H26Rjyi8DqpHtBAbU0OJLzHBEBFxEEUGT1i5AZEAzRdiXlweZ8-2FF4sYCHWWpEF-2B6k6BXoPNK8f7YtkGqfumOlINqVg49qcPDCa
 

 

 

On Sat, Jan 4, 2020 at 5:10 AM Sven Constable  wrote:

Not hard at all. Here you go:
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOlizgSe-2BjAPMKBr1YR-2FXJ8MzdH1yPHPbsZ3RrX4ttjLpTv7cOu6-2FePBPLgHjALwrTaqJr-2Fey-2Fx6h3YxbK8AvVJT7CzLrptwXq6SISLOPWaTlpw-2FpzT9tsM6dvOOIh2-2BXkt86qEBWxc-2FX0RUl-2BCyhrs-2B-2F7hUww2Q8Q3GxjS1jgF8H_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8HlOIf3Lu0Ti-2Fr7mNWK0nnaTKw0hugMFzzhJI3yjk5vgp3kTgYdHh3tHi0ZTxTr9lKC26xY5e9XAvYd7C4oB59FQk3qioodL05XIGR-2BjEP-2BM4v78M-2FF1uVps1TYNefG-2BvtWjuO4OTKSGc3oCGn59UknerB-2B9GkWZ5sIF3Sdhb-2FAFODyovZhTz8irboyUMEa8nhvPSCBhTRkM42HSzoFbz

 

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Saturday, January 4, 2020 6:05 AM
To: Official Softimage Users Mailing List. 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH980GQQroK09o6z6-2Brm5kNjKYxyJ-2FdCol7tebcVWM7-2FG2LJW-2F5eax7AR9ehW9194zhXZcDBjzAMNAEuNah0tHvwJTRn71qj4B-2BiDFh8RVE-2FnPuzooA8p7550vatPs7b630g-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT8HlOIf3Lu0Ti-2Fr7mNWK0nnaTKw0hugMFzzhJI3yjk5tfPniWcHHm5Kq3dL7lXFnaaNBXVpZ-2FCFNeokvwCLZM9PGqbVWZmIYgfTn2dBjhKklJpIJxJ6jZ2hmx3kPTjyOuW5wWDBoIy6-2BKP3uV4hM8uv8F2E1rwqewPgSfxeTCv1-2BF7jBfgdVhJVt7-2FlJtqUbxrnbWmrW63Bb1DfQ0kklvl
 
Subject: Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

Looks like 2015 it is.  I will have a hard time finding 2015 sp 2 thought I do 
Have just 2015.   Thank you Sven! I will take a look at the bug fixes.  Hi Phil 
here are my sp

Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Pierre Schiller]

fcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuQ2lrd9jonl69RVUv26a-2BiU0AkAimZC8-2FiiMfZqhikms8dxkoWOPbnMzPkYjEojh0DnWDHd6DlL1pRsh-2F-2FDtbOqj4qLwafXp6onsIsmOg5RV5Qmw87GIXgurkw1EZ1hhVPGrbd9LUwdiLUPAgBzwM8pBC-2FZtKozmszckYs8bDeKh3wmbs89uUbILNH-2BiSpQaaySQ5Q-2Bx7APMFu8qV2r-2BvlV
>>  
>> <https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOmMAKB8JGacZcowsK4IlqY8aQGPpnujEXNbmyey-2FEv7HGtoL-2BI-2FyFXaqM003GW6wYi36VK5RlUUzB5WqXMoPTwNPainGGlvtCQf4gB0kvKV-2BemHEdbkZyAlHTPmi-2FqcIwxgp4zIjZ4L4pSRLZZd94i6P1BAFeL8KpAmmwcApBtn1-2BWNRNEisDjq6G6onX3PedTbcYESYDRa-2BuUrcTdgRstX-2FlZ65yk87kl8DS8GlR-2FldD0BJz1CL-2BxotJ0-2FqoWt3GKwpLFfC5GxwWfTSdPSf8SFxrYpbjO2CAucrKCOtTQWmn2l-2FmXRUVjsPIZpWIsM6ldvU0Ab4NofYM4bZJXcLwN7eN43OrCQEUwULzKEi-2FikaqAzwFYD2QKCtHhDwQQeiGYm1QbtnCAZgxWsoaGdn003S9r4lM-2Bh6-2B95wN3PnhyWWxQXUVvOu2kwZnMblK1AjxGEWAOyUIhDw2VxQceyXSU8Y-2B2C8lK0aJlWkrp7bbPPaLTi9V1A8HiAkZw-2BgArF-2BhF-2FoAh-2BySHH5eIrls1JgPd-2FaDHTtkPrSfZZc1ZIW7YECP7ODwqSkpRrum0yZk4V-2FhYok3D5LYEyLDcSackLe-2Femr2rT2OeWt2xeYg-2BRFX7KM9nfpM59gVUV-2FY8Uhiv4-2FHFtj4Kwde8-2B75wMs2frQWQFAt8GST-2BqmaUcCM4ohEFVyNlrO7vVpJ0kcHCgE6ktD7wqGv-2BFwdlUPlo58a7DhRjWAtcw3oJd-2Fx8-2FtUrhXiydiMOds3W9H8zqwsuGqAhrwKD8GYpit95TdyiqG4j-2Bi5h5cjVjx0QcG2a0vFu-2FeL9dbyb7eV-2F9obTPPgTxW9MXzyymYIwn16CATIYXI1xLtthCF8JJkNvf2kWVnBcEPBDM-2FX5C67vxBBOKZVD6U6kz0KaezVfPpqKF4a5-2BdJgjDqPCXvMUsiRbC59UXyaJaSjx0WDUP1xqR8cwDa-2FrwwNg7iuB5WT6PqoJ1Mkx0Ni-2BLICtd5kngO3BZwPWRDkiVxZO396-2Bcp6rtmARKONZYN1X7LafpYncAzuRnWNCaIh2DG94ROebAgf4PsET79MAC0herBvDdWA2m46-2FrIrAGAWagiKn4vPQv24vhuwBShltPUCGORdoGJcgGDt-2BXCMuzKglb7N5VWZlOpeaLVmBHrBwoUr5xwiwe31u8Vt7-2FpDYrNVzqiWROagfo48e3oYbwgK0nDIH5qv2oU76DRGo9ThJOaQmzeSuMzdKrOJPFcX68fKzpnfeoadRF3qdPaZMFo7PqThKHofHQ-2Fba9xkM1k3Q-2BQPLAaUXJ-2FDwQgjeRwue8HEOK6dwWgnhovCoeTMM36lSfDEVTS0ZexJm4irAIf6bKvM2JBSnF67b98lFeNNUkRA4u3DMKKdKT-2Bi9uWabONbLdX8joHkcsCNF91bCbSi8Z-2Fk5WbVM9BZxGGJ21mDp78L2tQMGc-2B2XsUcl5BVZdKAtajo6l44zdEi6au88oB0gSAp3sXIrOPZL7FuJmAOoZcq9YSy3B4UUO0VCZi2lKKQ-2BJYD8BJ-2BgzxOeFiR8MTZX1BCUpssQbY-2FVmW7I2e0LxsbzHLoRMC-2FrXCB5bvyv7f7eOhWPFlvOngKqpiHPRGqkWyJjrw8uVKnW40UpOttu-2B-2F0kRNG5FPYo69sMJzHNeLjmQMdeUVbZJbuKCtk3Yy3hNmZ6poyZVQrnHsddhCrRYGz0dm8YejDn9CDItBeTZ5i5zEkFwEt06rht2n5RRvTD2wvagQVJxCXfurSYEFRTCNglaD2xb69Bby9HlS7Q3QX-2Bb3iGaMkKPGtOydUgIoJAGf-2Bi-2Fn7sI-2FnH2gOswsRbRx7OVufq53F5fmIKByzVFgmmKEGpv6eg5STW5W9acsrrOWKzFiufkbByiMKkhIYjMw10-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuQ2lrd9jonl69RVUv26a-2BiU0AkAimZC8-2FiiMfZqhikms1yIYUXwm9TLY98mrGkCw6p-2Bcjio-2FgasbBXFXEun98f-2BACYZPWi-2FfZC0JGjZBr6c8FCxK3R-2FQhujy5vEBYkapgOE47UEkOxetd5Npyj6Q0gBffYMgltwDu9iftT-2FNfpsm9rFEeL0QxTMcWWRtx9U92OWIQaYI6KCfuUuYsNCdfLo>
>> *Subject:* Re: Last Install of XSI ( I think) Should I use 2014 sp2 or
>> 2015
>>
>>
>>
>> Looks like 2015 it is.  I will have a hard time finding 2015 sp 2 thought
>> I do Have just 2015.   Thank you Sven! I will take a look at the bug
>> fixes.  Hi Phil here are my specs
>>
>> Intel® Core i9-10980XE Enhanced Performance Processor 18 Cores 4.5Ghz -
>> Extended Lead Times36 threads
>>
>> 256GB DDR4-2933 MHz (8 - 32GB DIMMS)
>> 2.0TB SSD M.2 PCIe Drive - Extended Lead Time
>>
>> NVIDIA GeForce RTX 2080TI 11GB
>>
>> Blu-Ray RW Drive
>>
>> https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8Twdy8kGt5Mk7FPUrTq6GBR-2BoO013lShgwF3xTiPl-2Fr21CCkEjB-2Fkfr1UHfcQSpDO0t6AUynpVG0E-2Fn4Y-2BPRf6JCAaH4fPhP5V6ZWQvs29gBOnpw-2BVyatKqV4K-2BOemroP_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuQ2lrd9jonl69RVUv26a-2BiU0AkAimZC8-2FiiMfZqhikms2iDaNG-2BKbPq9voT7vrpOHcnDdcCUGC36KNI4hLSrWOvecybBz9EgiUkHL6Yc5TFmMc6haRkxTvS-2BjSo7SwOexyQPSrxiiStl0ivDq-2F1-2FSsAaHIUlf7p9ro3tZz42GdsG0Bz6KgACOrfq6tgnGzW6uksZwUZmSjX-2ByDPiZIf9azZ
>>  
>> <https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOmMAKB8JGacZcowsK4IlqY8aQGPpnujEXNbmyey-2FEv7HGtoL-2BI-2FyFXaqM003GW6wYi36VK5RlUUzB5WqXMoPTwNPainGGlvtCQf4gB0kvKV-2BemHEdbkZyAlHTPmi-2FqcIwxgp4zIjZ4L4pSRLZZd94i6P1BAFeL8KpAmmwcApBtn1-2BWNRNEisDjq6G6onX3PedTbcYESYDRa-2BuUrcTdgRstX-2FlZ65yk87kl8DS8GlR-2FldD0BJz1CL-2BxotJ0-2FqoWt3GC1eZmu150tHt2Hoo7vUfqGlc8sqyr9inao-2FKutkAOgrAOeNlytXSiAIF1EO1eTA0gi-2BeXOIpeNXs9hqsso7J31GGtx98k27SWSDYO3IFSzdycBCTT-2Bch2rVQ3Tpkl490nRx67wClmXK-2BWbCerqE-2BB9dUnHdxXkB8l5uu-2FhbZWW6Qhe7PcKiZNQ4LOpoAKu9Lc7VUd7En4i0CcSwSjiOPUNCD5rT26oV2jJaSvc0rufoihqOh71rJEYJ4PtNqpSNtF-2FF7NYTsXfZPwrNKVOueaUyYo-2BaRAO45QVBDCnawt8-2BIE4YFZ7lNowQMkZvIzMRa5Dzn5WdK8Qd6WmFuL7ctBpGWCaFJIZhiWCEB2AFJO-2B48KUkJRJPdDgG8YZrmR0YH4SzmfAsrkNiDaPTeOZqcyS0zncrjBtE-2BY46nevYtCTnr3FWi2-2Ba7aVwV0DgJ9SyGHSoTHoSLyLCfgqAxXOALMpbCshlTglKRD1UNsgcp1Uz7LV4-2FVb-2F-2Fwjw

Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[F Sanchez]

4RLfqorTO9hIWMrBXKugBhuwl8v8ezI4CG47OBaNUh1E6oFfFJL-2F70ccMm-2Bjvw0HnG9OD26WQE57EXLqRlMr5iKufIt9ty1efvte8s0MYf1skXgoCpgjceetoT-2Bcq1gGqEsceH4FIBxQB1w5_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSnaeIYIgvf32qWStiS23xBN7aGwzVqYDsBHxBDoG7l398ACcJ7NRlyBFAv8UHOSbSbm12Y1x5qe94a3sUp-2FDJgEHeOvqXDgsKsq3csY9ltKOjMWjoWv995WWfxjyo8CsCqTs2w3I9nveRSS97tYCQyTqOJDW4fBQi-2FgpCXZ-2FtGqq-2BHn543l4SV2RfH1iiOhghBQ40Ro1Li4P-2B-2FCK07YYpM>
> *Subject:* Re: Last Install of XSI ( I think) Should I use 2014 sp2 or
> 2015
>
>
>
> Looks like 2015 it is.  I will have a hard time finding 2015 sp 2 thought
> I do Have just 2015.   Thank you Sven! I will take a look at the bug
> fixes.  Hi Phil here are my specs
>
> Intel® Core i9-10980XE Enhanced Performance Processor 18 Cores 4.5Ghz -
> Extended Lead Times36 threads
>
> 256GB DDR4-2933 MHz (8 - 32GB DIMMS)
> 2.0TB SSD M.2 PCIe Drive - Extended Lead Time
>
> NVIDIA GeForce RTX 2080TI 11GB
>
> Blu-Ray RW Drive
>
> https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8Ey3ZIVMOIQC2zQiCZoTpisUtLvHj7RiNEwKFHTYgP5Bxg39dJ8z8XqRE7P3HEvNDWa-2B0-2BLKVrbvwhG5S5s5Fc6BXBRJxtj629PHnVIc4jwu3j5czlw-2FTRVK3booTEPMB_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSnaeIYIgvf32qWStiS23xBN7aGwzVqYDsBHxBDoG7l32NQNjIkHKmBft7ifmRnajIotUe-2B-2FTVai0r5spPSaenkExdyAgfSZSEqKabx6vdy-2F6R3jisukzuJPW9tPQBrdLq7r5TIXy6u-2FJBVzxJkqc7SINIn6fKraZKzsGxhfnF-2Fbacm3Lb10jKPKilG-2FVBJO3mkmhR-2FO7SJ4Y9YON463ABJ
>  
> <https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOmMAKB8JGacZcowsK4IlqY8aQGPpnujEXNbmyey-2FEv7HGtoL-2BI-2FyFXaqM003GW6wYgVbvyfqUv5Ew-2FWrUPctyBxjqg5RbKGjTYCwhD5QntG2vLT-2BvSNeIfu7ETWshp-2BdSXB0xeLoiQtZdxwbZe4ZGaD3P2781LPHOuPwPgxJMXVF-2FruzB0O-2FT2Kli9lxhCEtmktd5-2FQz04HD-2B0rFp7Qis9zpXc6LTfESkSyRtrVZUuW2rptJMllOdS4gbnyB3JD4YCkhP4AcTpgHnvXiHam8rt0Pd69DkJhIgf8dX791jRl0Zr5ABs160dQzZw7bPEBwnZOZ4Dda26E4-2BW8lQcWz5IcG2v6ymOFI06JzlD4Glur4hZpQto1vWVUWuY9jnkd3TjrCIkqj6UaXiZQABZfeUPY0buSS38iHlAB3QDF2oQ99rLyFoQ04SCArXAHcvzixT8PsMRD-2FXd9eYie-2BXq6PbeigSB4CpFOK2q9xXv-2F0IULRlwipKmSVti5P6J075CvJW0X5jM-2FbNDQge2FzX3Eusak7tADDyJBJ-2B-2B9OkIMOw2GbO0BLqg-2BkcXL4x0VQ7lJgGCrvLbASHC-2BC-2FGE8Hvt609kxPdduzdTwJrCu-2FcYR25b1jzq5lts-2FYsz0aNNOzLvWd-2BhWc0K3UjeNwDAND0Gr6QhKGUq9-2FfCYeDcgXzHV0mE6DMl0O2GqRrQISs3FwDcsM8jBP8j-2BtWvlsx-2FcMvQh0F8R1ufI6wjUb-2B5LyRO-2Flopd8QZNQTy5B2afarNbSYp3XaHQsVYXk21vb9-2FRByg9nB49JFhQgFs2sxm5ovVW2-2BkiH-2F2YgZhQth9VnGwoe6dnhC3kBTuaLrIB5kHXqN1gLIlvsiCXWeQ9fZpF1MThOx-2BC5kKn05zzCIuJxEe7diH7Udv8FWRe50gtFaeYiSARhiYBdd5-2BABUDnjHy04ly8O50Yo47PU79bP8HZCGxYz9d0q0QyfVFo-2FIRlOnTDiyH93euTHW8pYK9J1oQgUXoQJpISIPtx8-2F9c8jNpk1aUVJtN3I14DNf-2BEgZAxkS6TMmUfOf3JV8UzE6Jx-2B3GTt6uCPw9sezqTPEvue4DFgWpGLu-2FKdz2zgEpAxcBFhi5ZJ5eY8-2FaQO2AuzHZaFBlhGz-2BE8s5UpMkIfq-2FEAixA3O-2BNP-2FcB9rGEZbcG56ab8TzVDrqKyqGXVGM3IRoUW6BGjrCgema3bO3f0v348zCPl6iS0q812VeK1X-2FxVZsXsOxYTuGviodc-2Fc6cfwms-2Fz-2BxykWOB9kAfOzYJO1TFeeGuy-2Fln0FrQtSe4Kr-2FYhcxs3aXB1GqItx2c8337rb8EdjfEdVybOM6-2ByKimfDKrct-2FoGestnJyRk3meezq5rZQ-2B5QGED4RKOTu8u5m7yJW4eUeeplJRMM0HBt0wBCH55g5N2F4OCgyqIcpxlwy5sRXbmxu22aGXNJGwvs2YSg5cB973TqR9a1YbF4Lc81OLkayUsetbWVRM2geBfkmpLJwhXcZRjevvluS-2BkQOfDRTP6xJqQfiHC9JXQKvhB6ClvpDPQvjap5Xz3G0-2ByUzbPgrQJIgJTr9eZ0HFA-2B5ocxsPBFwYj0QT6-2BJ-2FiuO7VJXd9gXFWFGlmiLQvDyHGHaxaw6SoTxwjyGg7OaOdRd1TjxBUzimDdj6fSvEPihgNNBd-2BxMmMBbi-2BtRz6Tmq2zLLVbruFLdXzUeKJonQrFHiJzovqvhCINIBB-2BI0Tko043a34V1n66mFyvOagml-2F4EIuWnLAbbDbHKWgMAQsFOn4dkEY-2FozrP-2BdicP0GRJALwhkGL3jsUrMTWrDN1PoZP9sZ9CFZLn4pPVgCY8w1OAAfokiuje6MDctIlNud9urT7dhYFl-2B1mQha91-2B2u-2B291ybzram1fgPeerVFdi3S8ApqsRpZnD2DWe5bN8A2Wq2wjZtK-2FkwaF4CXJl-2BeWsKYo9jrQxrMgJJjDEmIZADhmMwppjJ3P2WTFUzP9CTIscXjGojjQoguUWVr4OIzQXs-2Fo-2BWW2nJVxwsz-2BihE-2BWgQL6GpeAzgO39b4P2-2FRxbMOtpHT2ODWLOttyoI5q1JnGbgq9Hzt5O4RQ2RsbYhzjr6LtCXB3ITFOQ0vvj42vI6XAQl9UmuUzNK8xJBGyx9aJ-2FwzPbxgaz4G4iZX-2BsGBLGGRaydibcIrWoOMcbVsRK4HuxKRojwu6v1i-2FYAf1078zcPvI8VEKHIw-2BHcrsGhvuwc3849t1VEBfZ-2BryhseJ33NxN9cchuXQWn6Nmav4aBZ87xeVDcoFumqWt7Hi1oC2AlMKZHweGsE4u2k98LalR3Fngf5D1lRDz2qzNWPXEGDkagGBWpjvLVIx0604-2FzvCC9i95NKVeVGD20yyDcqq1lBbkK8whOyKAYSAMhVZQ-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSnaeIYIgvf32qWStiS23xBN7aGwzVqYDsBHxBDoG7l34rMqDLI8GgSz-2Bxit-2BFnJoyley7WC-2FLUdCO26PJ8IBABoIsVvp4hmtOrLN0gaYU-2BZsSOo-2F68z0ZaaDzO8ZhrxOGZAYx0ppkHx3TB472VNdZGUcm6QDx9X34m90LBYOFOu39N04pLujtH7soJJiSxXLVAj1pUIZyQbL2xcZf17ngF>
>
>
>
>
>
> On Tue, Dec 31, 2019 at 2:17 PM Pierre Schiller <
> activemotionpictu...@gmail.com> wrote:
>
> Agreed. At this stage of cg industry it would be better to go with 2015.
> Maybe some workgroups will pick it up without an issue.
>
>
>
> On Tue, Dec 31, 2019, 1:31 PM phil harbath 
> wrote:
>
> I too have just completed a bu

RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Sven Constable]

Not hard at all. Here you go:
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOlizgSe-2BjAPMKBr1YR-2FXJ8MzdH1yPHPbsZ3RrX4ttjLpTv7cOu6-2FePBPLgHjALwrTaqJr-2Fey-2Fx6h3YxbK8AvVJT7CzLrptwXq6SISLOPWaTlpw-2FpzT9tsM6dvOOIh2-2BXkt86qEBWxc-2FX0RUl-2BCyhrs-2B-2F7hUww2Q8Q3GxjS1jgF8H_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSE4JjSNDMCkOJ609IK-2BRlDuZgc7MUo76OQnYf-2BIUh1MAxDg465-2FeHOloGpSwZ02s1lUzY56CZzHYL3V12KGZatDGfVbDug7lb-2FT6h1WXGbvP38p9fCA7EeHIKkpYS3UhBCQEkIlCifnFXdmTSOIAJigcEpk8ENM9naRtZrK5B7DMDBrD1HHVOBVmO0wUL2tPh-2B4fzKGs1Jb9i7cFykluZ8

 

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Saturday, January 4, 2020 6:05 AM
To: Official Softimage Users Mailing List. 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH93AQ8StqSljzLWNgfuSWTtZCdSNziWdiK1YpBV10J-2B-2BKYDbKObhQF5Emddw3LoPKD4dwQuETOlyYcxMRGQNCp-2F7lh7rnt6uXaBUOYXF54FxXoVA-2FaSz12-2FwOpJSH4-2FVdUw-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSE4JjSNDMCkOJ609IK-2BRlDuZgc7MUo76OQnYf-2BIUh1MPvqd08TK4TYtzwOxUJE4pOMT2sFfK7PxIrKlIBc5b-2BUHgIs-2BozXWM2cvcFDieuwxPwimaSA9QTFfQVFAGCwI-2BcigS4n15E3yE7WQVAoryB04HV6TtGm2N3uac6nVtJWawHflODDw0oN5uB2O1ZroSbE2QLOW7vFpok6x9PY0XJq
 
Subject: Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

Looks like 2015 it is.  I will have a hard time finding 2015 sp 2 thought I do 
Have just 2015.   Thank you Sven! I will take a look at the bug fixes.  Hi Phil 
here are my specs

Intel® Core i9-10980XE Enhanced Performance Processor 18 Cores 4.5Ghz - 
Extended Lead Times36 threads

256GB DDR4-2933 MHz (8 - 32GB DIMMS)
2.0TB SSD M.2 PCIe Drive - Extended Lead Time 

NVIDIA GeForce RTX 2080TI 11GB 

Blu-Ray RW Drive

https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8ZuQ5f3OUSmBKgB4vC8GVbfR6lbjwkDSVvFW0xvcuejJTOSZ0bkPllZfD6YKDlSut8elHx5-2BFE8ZWzYGUX3LEzEGHwya3k8mjOXMzUmLX3iNb0x6OvjV5D5HKL0j0xJH1_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSE4JjSNDMCkOJ609IK-2BRlDuZgc7MUo76OQnYf-2BIUh1MG9L1JjXu90amLYrFR0819Yj6-2FuiAO2vHffRBu52in1A7HCq2WQ7NTi8sJ8ctBB27HtnXuvV2n4o7niuLRgMLyZFBZkxCzIlt-2BQnRiF-2FMPtoGI3p3fU6uvRHI20NHuwors2hzPsn6YPnt4xML4YrksBzX0XrBhHkAwzgNsf4dArS
 

 

 

On Tue, Dec 31, 2019 at 2:17 PM Pierre Schiller 
 wrote:

Agreed. At this stage of cg industry it would be better to go with 2015. Maybe 
some workgroups will pick it up without an issue. 

 

On Tue, Dec 31, 2019, 1:31 PM phil harbath  wrote:

I too have just completed a build for use with Softimage (15.2), took a bit of 
time to find the download it has been removed from my active account.  

 

.Just curious what you have under the hood?  I wound up going with the ryzen 
3900x, I wanted the 3950x but I couldn’t buy it anywhere,  I would have been 
tempted by the 3960 threadripper but it was also not available, probably for 
the best as it is super expensive as well as the motherboards.  I will say 1 
thing it just goes to show how important  the video card is to redshift, as it 
is about as fast at rendering as my older computer from 2015 because the cards 
are pretty comparable.

 

From: Sven Constable 

Sent: Tuesday, December 31, 2019 12:36 PM

To: 'Official Softimage Users Mailing"List. 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH93AQ8StqSljzLWNgfuSWTtZCdSNziWdiK1YpBV10J-2B-2BKYDbKObhQF5Emddw3LoPKD4dwQuETOlyYcxMRGQNCp-2F7lh7rnt6uXaBUOYXF54FxXoVA-2FaSz12-2FwOpJSH4-2FVdUw-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSE4JjSNDMCkOJ609IK-2BRlDuZgc7MUo76OQnYf-2BIUh1MHZN82iWl5RvQOtajbb1YgR9C4s7hWG-2FLfxt-2BRTuET7S-2FalZMsKlLnKuVfABbulea3zDZe3ggGQoMj113Vqh7if749AT8gsk40GPVPhyIFV-2FxpMjKihc4YXDJbcY0KaUz4j-2B8I5IF6HyaQ-2BK8OiTk0t8EAVJmy0RVmVM1enCQWX8
 '" 

Subject: RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

Personally I don't see a reason not to use the latest version if you can. I 
attached the official lists of bugfixes and known issues from both versions. 
Both have some more issues than that but it might be of help.

 

Sven

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Tuesday, December 31,

Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[F Sanchez]

z8xsKkfMuYfbygLRPtbfxFtdpRAmyQSE4NdHPCDAZ8ORSAPFmNfhskFPLnWSvL5YK0UqkqQikHVIrwqRnytreUdpq0q-2BjJTnQ5KzYacb01wGvF3MfxAKP0eFh60CFPzZwjllQf1MR0-2BwapL0ZMPOzEw2NHbLU5ovHzJbfKVB5x8ab4eKc5V4z-2FolXRFwd3heF2-2Bzahh-2F_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuRqEYJr0fcbR9TDP1gKrWwPw-2F8ix0cL00GIilyb8v-2BPzBdnqMk3Cclp-2FkZzwOGnColV12bg5KB-2FTPRKbLZkNcsMEJ58DxWzZGcH5R1HvsOA2lsPIUF4djnoz6hy46iLmF7Jrmz8JzLo-2FuIevNTH7mnYdjmpOyQlFP4t0aE0N6LymiV5B-2Bsbik5jdkm0HrV8SfSubaAU3Nyz3d6Bw19FTU07>'"
>>
>> *Subject:* RE: Last Install of XSI ( I think) Should I use 2014 sp2 or
>> 2015
>>
>>
>> Personally I don't see a reason not to use the latest version if you can.
>> I attached the official lists of bugfixes and known issues from both
>> versions. Both have some more issues than that but it might be of help.
>>
>>
>>
>> Sven
>>
>>
>>
>> *From:* softimage-boun...@listproc.autodesk.com [mailto:
>> softimage-boun...@listproc.autodesk.com] *On Behalf Of *F Sanchez
>> *Sent:* Tuesday, December 31, 2019 6:13 PM
>> *To:* XSI List to post
>> *Subject:* Last Install of XSI ( I think) Should I use 2014 sp2 or 2015
>>
>>
>>
>> I Just purchased a super PC from Boxx.  An upgrade that has been 10 years
>> to long.  This may be my last install of XSI I have a  permanent license.
>> I remember 2014 sp 2 as being pretty stable. Not sure if 2015 was stable. I
>> don't think I have sp2.   If you are still working on XSI which version are
>> you using the most?
>>
>> Thanks
>>
>> John
>>
>> https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8U4bL0ES2DRQ5nYQqZwrmAv565M4b5l2T59VZCWMDCBw2Fs4JDu-2FqHAKl5AUwkoqC4R9q0tNRV9gpzWclqfSj7fjb5wKuNjyC8SzCDFw6IvSVoAPJZGtnv9-2BQxa7gZluI_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuRqEYJr0fcbR9TDP1gKrWwPw-2F8ix0cL00GIilyb8v-2BPzHB3QGx1j77vNUyApN46BVdb-2FyZBUu-2FQE731HLbA6-2F59MxKJCerSgOh2FxITTlWsBfI92N-2FPsL11rUInwFSaPShIVIkrk3Z8twhzHaksoRUQIe4Ph1SQ0eZWqPAXpxkm1O29A06bOE3oDjDbtDjxS1C1IJw6AfTgr5EGkkNs7z7j
>>  
>> <https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOmMAKB8JGacZcowsK4IlqY8aQGPpnujEXNbmyey-2FEv7HGtoL-2BI-2FyFXaqM003GW6wYi36VK5RlUUzB5WqXMoPTwNPainGGlvtCQf4gB0kvKV-2BemHEdbkZyAlHTPmi-2FqcIwxgp4zIjZ4L4pSRLZZd94i6P1BAFeL8KpAmmwcApBtn1d8r2DQxpzb6mk-2Fw-2BTPx1H61sN5QQNed0pEkPoRzlNw3kFia69Cd7DDh13py9gA4Wng-2FpQAhUBZCjQnmKcYLWv72j6VqQ59kRZeKJAwv3rgNOzURSQIMOjQ8EYkcUmU4FphWgTpaRCBTMG3LDf-2F6TDwvV9qZ-2BG9q7ssiovuTNQk-2BqbyKbjgnpLMPWjrNK4b9mxFN8XtaDqrWBM4LXFVoweFVaopwXPVKVWdoLr2PAmnX9oBQrHSnSjsUq0mCxukKS-2Bxqz5SMcaa0VQcYxouA-2Fd-2BujIeQ9x94ekwtb3-2BhUa-2BSmOXU1wPMJUHaxjoZVvNY7UEub-2Bd4VE8Jr4hSkCNm7sb2cHYzKSUprj-2Bp7pyQc1o2Uby0FcNflGl6B9bl0yG4uXNaxQAOKcg8jf4hpMHLmK4lwHu-2BD6jHYXBqm0YVIo8V-2Bw5zLzC-2Bao6LLbjUaE2NRgc-2BSOiUrtqhZhimjDn0MJm7KAQVeLNG23P8JekCpijpmXS9gyeIfq0yl4wnOubEfIlDLUaZmuoyeIgKj84Zd-2BQ4iGRFk2WBT3YeCZkUlMRY-2B1zu9U3-2FxRSb-2B6OaPtahclF7AYE5U2SpGSgh8PU9bAlPO2W229z-2B0lRayzqjcaYXfpEIFEs0WlVcXuilV3uDYrK6ilxq9JeJUzTUD-2Buho3nhVuwKuBu0g8zpJU5mBIQ92IvxrSPNOZMEZ01RsZoqa52e8V6yHkHqGDWrOJj4J-2BXGizaf1AyjCfZbotWzePUO9hT2ZNYhR6sP2zmF-2BbBzz3zsYkhtjoRrWQ7KJzDXva-2Bs0EOmK01yobY7GocnyaeRvKhvvYUMWtmkELzMpd4-2BvfiE6uvruH0yrS5jNx591-2FIDpj1yjqtqq8YGpQvPpedpcTgmWOOzxBzVm6s3vv55BPG2vtOAkJGurWqi-2FrajmsHw-2FkZL-2BDkplfJt1JFuJaUk-2BBScyiP3wxWBr42u0I-2BwK686be9mzoRt2DRyNGwCtwwY-2F3h6DAXboKBw-2BTyvsF8atLxMG4iKB9In75LvZOwZmtZlS3W92NOtse9WbQhkPOVFFyMhGZECVNnF2o29NTXTGR2ocAxGk9BQ-2FmlXgwEQ65dWOKiie4Y0vywLThXZ53rEbrBEMirGLGIGZm1-2BIooUZqgfKNSbzg77oUUWcDOjMhnAxBDNrXO5HsS2eUVBtjKigqXSSMBNwM2TGe4OsLFa1K8eTW8erD0B3FSMJEG9hcIbwnwX-2FJWog0n7KNcDJraBlz4BPywJW7l92NSUtHoIsUHSXp6mK7M5H5f7-2BhIUwmRO4hmIvffAm-2B0Wkk0HrUwR7SmldDkI-2Fsl7oHDaZJitu3o-2BPGzCM71C5o1TIDJJArbTBtZHE-2ByJadZlR5xE3hiqz2wR7EPzH8GwictPXcm-2F2pQC-2BvOAj9FsVCe7igm7EDg0r0-2BMAuQU9QEZ3eD1WrSFwQuYPrHQWocwhDXg93oQCl4DqC-2FKmNdnbVT14OfUfbn-2BLCl0sOFw4NO-2BIY1qtbmU0J7a0gWBx3FNW3G5f0nbv-2BthSM0dGkBD0i85nZ6BRnLGUcFHTdXWmKjLscF-2Bw6W4pUv5p24IK6ny1So1V8D9wAzRThqjtnR1kLQBvV9v0AWPHdGp4atqmsVuMcAeCzsHMIasDglxO3LkJ4EIOFVHYQbEj7pnHlIOL6lyvj5SU52igRRFdLS3UKj99nXv1o9AdBKwV-2FeMpGAN7oVJ0Ba4sed3QVmrBjHvyygK2JeMrkyQTJfytZ7X71EaCbXTgo51ier6N3T5jb6lkcfrUvSxSj-2BcjrmP0Eox53x11v7CgO14TtkYoZWAleW9pJEO-2BX-2BrijMsCP0lw9j41dStfATcfr7x1QgsF1eiA-2BecuGuU6KjoTT71OoM0rkIOAhwYzAyJs3kz-2BHsnCQ6MSdl6Hbd-2FVPGCMysJqdEv3PXUA3oU7IOB0xWrEs7134NyR-2BW1GaKjZ9t9UG-2F7xsjtPGwJZHFsZvjFRqREUDrS6Z2nJ7YMxnJ8-2FOhnPKoiE6kzuHaqIvDgVw1UDibVAo2TWcmHqN3TG83V37kbApNoOUN1F3Ovj1kY9D9tF6TuOt5PTOB5rmxLHzts6gIO9x30WOR8wEwKi851VY5WB1BD8BbKoGYlbOek-2Bp4OtTf3dNqwxnDprzDUQKIfjem9Hu-2Fbdo7nsjAcpesfMVTkZycH-2F0fZKdOFQSWGzvuzYhHILw

Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Pierre Schiller]

Agreed. At this stage of cg industry it would be better to go with 2015.
Maybe some workgroups will pick it up without an issue.

On Tue, Dec 31, 2019, 1:31 PM phil harbath 
wrote:

> I too have just completed a build for use with Softimage (15.2), took a
> bit of time to find the download it has been removed from my active
> account.
>
> .Just curious what you have under the hood?  I wound up going with the
> ryzen 3900x, I wanted the 3950x but I couldn’t buy it anywhere,  I would
> have been tempted by the 3960 threadripper but it was also not available,
> probably for the best as it is super expensive as well as the
> motherboards.  I will say 1 thing it just goes to show how important  the
> video card is to redshift, as it is about as fast at rendering as my older
> computer from 2015 because the cards are pretty comparable.
>
> *From:* Sven Constable
> *Sent:* Tuesday, December 31, 2019 12:36 PM
> *To:* 'Official Softimage Users Mailing"List.
> https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH91rZ-2BG9-2BN3ICUCT87WiUw-2FRR9xN67MSTU2rnj2rwJTfrGoUzF3CK7zfz9jtw2qZl1pETgaHuZFgdCe0LhNmGp5T-2Bl4lcFlIqiY3OfzN3mv1toGCrcSU78ZG8NniaXY9-2FqA-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT3SNptmLFKh8fQZQ1wkEsdrW-2FmyQFjCQ4GEzMWdE6npfxfpRhyeS718OIpGkhMkv-2FC3snh-2FvueQn5eRaCOdhamQH825WchrAS2EgJddFZ0FOm0tbj-2B4xTjpbK8heAyxnpftC0mKP8HYDUj24SdiBhAjiUd1WCmCkuzNxIIwiUppoB9L1NLdhHUT-2FSsiTHDDI1Nm-2FJ-2B1N5hJHkndUW4xPr-2B
>  
> <https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOmMAKB8JGacZcowsK4IlqY8aQGPpnujEXNbmyey-2FEv7HGtoL-2BI-2FyFXaqM003GW6wYgVbvyfqUv5Ew-2FWrUPctyBxjqg5RbKGjTYCwhD5QntG2vLT-2BvSNeIfu7ETWshp-2BdSWAWcB7BjA8yxJgLX-2FRURrL3H8YHBwlQMi5CjdfSnl0ypGddsfLTeI4o2n-2BbKqDB4HaD7ZjXqkIRd38mRZPHxybI-2BIkSzpX91nozLNA-2BSH72pDdwKiopmW-2FDGIhdXSpg6-2FVmNMNydcYJEEMWnsAM6XhPug9AMjoUpbnuEQFhW-2FQdGZEcI5mmf5oeoAiMU0qIia69SOwhZNpEZ-2Bv4Y0zsZzqEk4ibH4JJA3ge50LIbxnvuLA1jp0GGP1YUBwcLWw8x-2F1tPeJPGDjya5prtPqzjRsVUMR1mdmJ2eWGR3BSvele1yXEmo1hw6vaJb38BHy61ZXRDNsNbS6zyr7pKsyPpu6HfxMI1ZH26m1NFN0CmKraWtPBU9384vfmEclVDyPkq3p69RQFl0RCT6jZDxzVF3It8yDSacviqLwBTQmuM7MTlgT7oLOQKQAUo2-2F-2FZD83QSHGVqGSFhUKKi69nsniWPfVc4PqSpSVuUnYu2AVVCJvbENFHYGJaaOoGA-2FN3kTp-2FAve3gzzdT1RMjrlvmFJgS0t5SG6sDMbKWJIMCPqBgB0hj6gAHvAECEqsLfFv8oPExXu8NkXPjUQlnXi9ZS4aj4mDFrRNx1-2B3kSuTTdre-2BTWXZsb-2BAvgSfzdqx42WtOoaJwIWeZx-2BTi-2BmxtVH8cHtV2BX6iiuTcljyw-2Ftz3oZfREbjfvekGgHKgfg4t38nq7i1ILhESYnz7M0ax4TnguFEzsvHpVLKWD55vw8pmxNMdjeKU9BrkppgVhzmwsPhrk6oMbqkCMiDd9K8B9NLr9tGrV8oiFXnX-2BauoGO1URfn4L1TCtyzGn1BmU3KqIA50z9iZ7uXNwNgHxbUbaY5sFXG4F8rANDekW1EdNAE1-2Bugd2Z81MIClWIskl9603GUl2Rw-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT3SNptmLFKh8fQZQ1wkEsdrW-2FmyQFjCQ4GEzMWdE6npZCfzyGxTnBGzx90ZB73urnDaQqPXZJgrah5fMgCyiI4mNKpEVfOrJOCiuWCKgqH8YBZglTe1FVbQn2ow1vcnftRCpTKipJhPHW72a3Esc2I60b5X37oI3wgSAfSF8THmuh-2Bd7pLbRHV3RlZJCk2aFWtge1Ws-2B1J5CRdaKIVOlJZ>
> '"
> *Subject:* RE: Last Install of XSI ( I think) Should I use 2014 sp2 or
> 2015
>
>
> Personally I don't see a reason not to use the latest version if you can.
> I attached the official lists of bugfixes and known issues from both
> versions. Both have some more issues than that but it might be of help.
>
>
>
> Sven
>
>
>
> *From:* softimage-boun...@listproc.autodesk.com [mailto:
> softimage-boun...@listproc.autodesk.com] *On Behalf Of *F Sanchez
> *Sent:* Tuesday, December 31, 2019 6:13 PM
> *To:* XSI List to post
> *Subject:* Last Install of XSI ( I think) Should I use 2014 sp2 or 2015
>
>
>
> I Just purchased a super PC from Boxx.  An upgrade that has been 10 years
> to long.  This may be my last install of XSI I have a  permanent license.
> I remember 2014 sp 2 as being pretty stable. Not sure if 2015 was stable. I
> don't think I have sp2.   If you are still working on XSI which version are
> you using the most?
>
> Thanks
>
> John
>
> https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8K6Y0w4m3wMaUfZBxzBznLrM-2B-2FL6GujB6oMVMX084XE-2FYDxLWTZiFyZaXDpSXa-2BrbNkJljzUg6g9K7cIZCXnrZGFbd1Uxv5NHbCCmfbz4A5m7svcQ0G-2FoI0969dmDtTFw_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuT3SNptmLFKh8fQZQ1wkEsdrW-2FmyQFjCQ4GEzMWdE6npRqK6C7lsiop7xFBHKVq9-2FEs7gWc4oma8bIrKJlsmn4IA8aSr-2F1ubE0-2F0wyQSYrc4faUz81fTwdGkZOrEMNM3XtO58tGhgPrF5N4Gm3XQ-2FmpWhSJ31GEEHxXo1snUKBY-2BJ

Re: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[phil harbath]

I too have just completed a build for use with Softimage (15.2), took a bit of 
time to find the download it has been removed from my active account.  

.Just curious what you have under the hood?  I wound up going with the ryzen 
3900x, I wanted the 3950x but I couldn’t buy it anywhere,  I would have been 
tempted by the 3960 threadripper but it was also not available, probably for 
the best as it is super expensive as well as the motherboards.  I will say 1 
thing it just goes to show how important  the video card is to redshift, as it 
is about as fast at rendering as my older computer from 2015 because the cards 
are pretty comparable.

From: Sven Constable 
Sent: Tuesday, December 31, 2019 12:36 PM
To: 'Official Softimage Users Mailing"List. 
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNchiLG9o7ECJDJ0Mw-2FRzSlfldhFWvv2G7M9xrogMv-2BiUgrG-2BmCVAfC2HxBWG0Czpbw8UUe9Xkbh68Twjp-2FiA-2FSErDaB0QMN6TZInAAMY3U5tTiO1pHL3fqc59MeZ53LOZG-2Fxgw7w1ET7NsZfhM1NrTIoU8e4itqB8an6cilichw7ugVnCs-2Bwed9bSquuodJl4wL3PlTXpIO5wcLvXRKdeVH9zV1shZMXt8VcEInwQliiAru8NEGs7lI0xP4d6D-2BcoFvwFF1MqIiDTrIYjRU7tFMWjpD1M0QbijH3zb5Gw-2FfaKRGTgo1VKvMuKL8vVlRh5xwVXdPSOzCGClaIth4O738gA-3D-3D_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuRtBokvjuLdaHYabvp0ITjcCVJpMJ2Wy-2FQPUoOWOWzSXtzxGp96vf0vyPNSk3hEK7-2FYnGU-2BwrRfjvOnEei2odkuSvJHpiVvC6MyANdbf-2F7f7jVM5eVFOI8x-2BjONtcQOvL23qGVxCs9gw0hlkmUEPXLUCuiBDoLxw4lma0-2BtJO5xIepHS1PPTKKHlrh8GwA2ht3GsnC0vzKGrSpkE6lXPKVy
 '" 
Subject: RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

Personally I don't see a reason not to use the latest version if you can. I 
attached the official lists of bugfixes and known issues from both versions. 
Both have some more issues than that but it might be of help.

 

Sven

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Tuesday, December 31, 2019 6:13 PM
To: XSI List to post
Subject: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

I Just purchased a super PC from Boxx.  An upgrade that has been 10 years to 
long.  This may be my last install of XSI I have a  permanent license.  I 
remember 2014 sp 2 as being pretty stable. Not sure if 2015 was stable. I don't 
think I have sp2.   If you are still working on XSI which version are you using 
the most?

Thanks

John

https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evDBIfqIdxVNhmn7c7dJf6t6bR2mNDJ-2FQqECNRlbfMDGnV4jZNInqGiju42ek-2BgNXxDuG0dKzce-2FNQ6-2BU92TuzG-2Bdc-2FfRxyIFYM87wirxLi3U3-2FTAJLg9AgoZqFeLBN0e8maIAvkGuu-2F9eixJ-2B0-2Fl-2B6oEXNRO9q-2FUl92bXIfKyWCbUvbS1A3UYD3W-2F1ws1L0jmXnJZ5UGzuQqzngRgaeTbg16bId7WfyeBKdbRg8sQWjBCDxfEAAQhrGnZmTMgN-2ByI_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuRtBokvjuLdaHYabvp0ITjcCVJpMJ2Wy-2FQPUoOWOWzSXt6lDXLUC2X-2FpvrtfR2IoIY8wE7pMLleJJE2kIDggCKAYP0zCvIFAvWwSwzsMnITydsaolm1zKTY957eH6ROPq96n9L7Y8Qvrm88dm8hNaCAEnbQcj0HbOngQ-2BrZcmp2W3zWCeTitVvX1zs1CU5ayRPAUOTxSxfFRh0CeTkY2-2BgL
 



 



--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[Sven Constable]

Personally I don't see a reason not to use the latest version if you can. I
attached the official lists of bugfixes and known issues from both versions.
Both have some more issues than that but it might be of help.

 

Sven

 

From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of F Sanchez
Sent: Tuesday, December 31, 2019 6:13 PM
To: XSI List to post
Subject: Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

 

I Just purchased a super PC from Boxx.  An upgrade that has been 10 years to
long.  This may be my last install of XSI I have a  permanent license.  I
remember 2014 sp 2 as being pretty stable. Not sure if 2015 was stable. I
don't think I have sp2.   If you are still working on XSI which version are
you using the most?

Thanks

John

https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7evOmmjHiwQ8Y782qpcOqrsGdlSr7tX2oNx-2BGw-2FMEdR-2FRb5a94AsHFENv5oScBv4OhvnTNrlEuYFhdNsERzgRU3Qci-2BSFBlRRH1-2BCsT8bVRaEJXYyAxxIU2MDZBhIlGls1ed3Eq7yVfW7MBiulgGyt-2F7UmMMtyd3dxbpvgQTZmlIZmglIk-2FnKf6j5WgtYA8P0X8-2BXgNutjcTvzLsstQQQcHUGxrndmdIKfAcOjDJXSuEbIt9o091mBe0vPbd7sCYP7p_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSuEpyuPaJvInBSP2Z2k23nYe4SWrFi2CwtP-2FKYNRt6qOpU6U8EWQYV3MNwUqLRf4mGA1VRhCMINJrrcukYZh4uuqOBUIME-2BFw2jqjpAwI5FIRfoZVT-2FocEs4U5JFJzBuAbnGrTW2gmlBkhc6zYm2ZXCSEd-2FY-2BpD9pPYOgfMT-2BbgQQejtMFNyGK6AEaEc4m75AO0DqSVZqB9kgXx6CDhL-2B0
 

 
<https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch-2BwSLMAIA8-2B-2Fai7Was5M7NUgkRPlvtBVWECuMBMaQ6RLkkQsPKQsWTDamTO8MR8pff-2F8FLBJc1lH4mNjKS3QK5jHleo-2FyBMsLGgoqi8C705LAotEwnMqH0EncZJxlSCGJCrmYepHs4kROh4y9o-2FleBXA-2BW3-2Fl-2BUose26V0OmAV5ExlHTf9QDtqa9i4U8ac7ry9tg2R77agPz8FEP4GRTI47CPCW6PD6gD5qk1-2BQSetKIv-2FTRaAsZlJfNaK4dd3ksXUqgtKcH0MM5nvHAj1vqGnq9izQL4XB8q8M7SQDSy2eW0dXKV-2BBxrnd3kBtTDpz4mJyxrbMaj6yw1ciT7rOkdb84jOCMNuW4e9rkL-2BRkvjQ10jXepf4L6i5pD82-2F4GXQi_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSuEpyuPaJvInBSP2Z2k23nYe4SWrFi2CwtP-2FKYNRt6qFQ7mH1q7Hq5BjGVDICUBC0UryBg1rki4KPJvHb6pZAaXd5qUZc6vp009Yz8gW1PZ81AaaWGU3PEAZr6EkCZuX9U8LyGefuZcDMN1-2BCe8DXtzWh1xXuFxhT-2BoRxLeEZXSMmnB8GdPfYU5EwlSqj0hGuUk5p-2BByN2gI-2B6uH7MTWLA
 
floK5c-2FY0hrbie-2Fi2GnQj-2BcLCpojnQoPSWcnAKuUtbFqfDyDHpxxR62ubWZ5pk6XRUeHCz
c79XEo4CBXvMDO-2Bk5YaeDVNqnmEPWWF2XJK4cc0hBOjp6WxbtdZ3C5mTzfb7CoS72ajd8rzW83
MjbPVJtHhaPGIeqwi61Wwry-2BDUqFuzdlFL4dpeMjzF6hL6NBTl6mM6-2Ft9ELSRrKBpQkSXWvd
GTP-2BUDlinP> 



XSI 2014 2015 fixes.rar
Description: Binary data
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Last Install of XSI ( I think) Should I use 2014 sp2 or 2015

[F Sanchez]

I Just purchased a super PC from Boxx.  An upgrade that has been 10 years
to long.  This may be my last install of XSI I have a  permanent license.
I remember 2014 sp 2 as being pretty stable. Not sure if 2015 was stable. I
don't think I have sp2.   If you are still working on XSI which version are
you using the most?
Thanks
John
https://u9432639.ct.sendgrid.net/wf/click?upn=lIXdN6W56FnEjHCwrBXqOq0HQNpV0huvAGw1zu6Xp8eVQuk2cNZiNFjx2k-2FfTNch6Q7VZ6QojVWK1ql4fk7tUD9YDpqDI06Whthvig24T0Y5IDYiFiioOLcrioqum7ev-2BgT4qYpyOQQCn0cWFYeVmoSxmXgcF1MBoyLh4I0h2yONOsHetZaLArPv7rn3Zz6nG72NX4RPCFuOhY-2FcMo5x-2Beceaiqja2DuQacWdgDQ1zFelQPRJqUxHZ7HBXpRckhYcw13LV4tyjhzy4hY19iWeA11mtK0bzf-2F-2FlWhohxqu5Hx8C4GN5oro21F9PwTalH6s5P6AfeAruDhnklWLk7mG7ByN4z-2BeXG66pxhLpjulBC60U7Ztu2TXOx6sxKjbQB3_a6oQc7tnfcb0GKvoO27fPkrQ0ATQyF1SDBXJOg7-2FbuSFrZBq3Cp2k6jy2bmmkAosfcqAjMAP5t8e7obH0clcuQVfGCaLSwUEwSZ9sRTTxs-2F-2BI9b3rNtWKGONNQdOyjhxzFGb-2FZ0IErD3xc4SQOQ6LWr3-2FnNG2ChPZJHmtE6lc-2BuGhrNRXfDajZydi5al5SA5RzzsjB5eRmenoeG552KmfPK0qZzdqvBy1o-2FBMClyT8tO3ZrO4iDcu2gPOBV19aym
 
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Can the Softimage/Maya from SP2 to SP6

[Jason S]

  
  
On 09/21/17 20:37, Sven Constable
  wrote:
  
I was just referring to regular service packs, that were updates to the
their specific version. I have no idea what is a 'critical' update. 


[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
On 09/21/17 17:15, Sven Constable wrote:


  AFAIK any version always included any updates within its version. It's 
not an upgrade, its an update.


Aren't you now entitled to only 'critical' updates?  was that the case then?

  
  
  I think it's just recently that 'regular service packs'  (not
  extensions or updates that add functionality)
  are considered as a "subscription advantage".  (except for big
  bugs)
  
  I guess to further entice recurring customers, but not just by
  means of providing 'good products'. 
  

  
forums.autodesk.com/t5/moving-to-subscription/what-am-i-left-with-once-my-maintenance-expires/td-p/6934331/page/2
  
  felice.s wrote:

  Hi @davidh2
  
  
  Products without an
  active maintenance plan or subscription are not
  entitled to receive incremental technology/product
  value such as service packs,
  version updates, product enhancements, etc. 
  
  
  However, downloads to
  repair functionality, such as hot-fixes for urgent
  and/or pervasive issues, as well as security
  patches are available to everyone regardless of
  contract status.
  

  

  Does not compute. Service
packs are downloads to repair
functionality, and should therefore be provided to
all customers regardless.  []
  

  

  
  
  
  

  

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Can the Softimage/Maya from SP2 to SP6

[Rob Wuijster]

Service Packs on the main release can be found online at AD, and 
installed without any license changes.
The Extension packs (and their SP's) need an active license to login and 
download afaik.


A new release (e.g. 2015>2016) will include all of the above, and the 
new stuff.


All this makes a confusing set of updates ;)

Rob

\/-\/\/

On 22-9-2017 2:37, Sven Constable wrote:

I was just referring to regular service packs, that were updates to the
their specific version. I have no idea what is a 'critical' update.

-Original Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
Sent: Friday, September 22, 2017 1:52 AM
To: Official Softimage Users Mailing List.
https://groups.google.com/forum/#!forum/xsi_list
Subject: Re: Can the Softimage/Maya from SP2 to SP6

On 09/21/17 17:15, Sven Constable wrote:

AFAIK any version always included any updates within its version. It's
not an upgrade, its an update.

Aren't you now entitled to only 'critical' updates?  was that the case then?


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with
"unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.



--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Can the Softimage/Maya from SP2 to SP6

[Sven Constable]

I was just referring to regular service packs, that were updates to the
their specific version. I have no idea what is a 'critical' update. 

-Original Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jason S
Sent: Friday, September 22, 2017 1:52 AM
To: Official Softimage Users Mailing List.
https://groups.google.com/forum/#!forum/xsi_list
Subject: Re: Can the Softimage/Maya from SP2 to SP6

On 09/21/17 17:15, Sven Constable wrote:
> AFAIK any version always included any updates within its version. It's 
> not an upgrade, its an update.

Aren't you now entitled to only 'critical' updates?  was that the case then?


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with
"unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Can the Softimage/Maya from SP2 to SP6

[Leoung O'Young]

I was able to update to SP6 by downloading it first from the Autodesk 
website.
Also updated Mental Ray.

On 9/21/2017 7:51 PM, Jason S wrote:
> On 09/21/17 17:15, Sven Constable wrote:
>> AFAIK any version always included any updates within its version. It's not
>> an upgrade, its an update.
> Aren't you now entitled to only 'critical' updates?  was that the case then?
>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.
>
>

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Can the Softimage/Maya from SP2 to SP6

[Jason S]

On 09/21/17 17:15, Sven Constable wrote:
> AFAIK any version always included any updates within its version. It's not
> an upgrade, its an update.

Aren't you now entitled to only 'critical' updates?  was that the case then?


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Can the Softimage/Maya from SP2 to SP6

[Leoung O'Young]

Thanks for the clarification, it did give my an error when I tried to 
update via the Maya interface.

On 9/21/2017 5:15 PM, Sven Constable wrote:
> AFAIK any version always included any updates within its version. It's not
> an upgrade, its an update.
>
> -Original Message-
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leoung O'Young
> Sent: Thursday, September 21, 2017 11:09 PM
> To: xsi
> Subject: Can the Softimage/Maya from SP2 to SP6
>
> Can Maya 2015 SP2 be upgraded to SP6 without no subscription?
>
> The version we received when Autodesk EOL Soft.
>
> Thanks,
>
> Leoung
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with
> "unsubscribe" in the subject, and reply to confirm.
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.
>
>

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Can the Softimage/Maya from SP2 to SP6

[Sven Constable]

AFAIK any version always included any updates within its version. It's not
an upgrade, its an update.  

-Original Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leoung O'Young
Sent: Thursday, September 21, 2017 11:09 PM
To: xsi
Subject: Can the Softimage/Maya from SP2 to SP6

Can Maya 2015 SP2 be upgraded to SP6 without no subscription?

The version we received when Autodesk EOL Soft.

Thanks,

Leoung

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with
"unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Can the Softimage/Maya from SP2 to SP6

[Leoung O'Young]

Can Maya 2015 SP2 be upgraded to SP6 without no subscription?

The version we received when Autodesk EOL Soft.

Thanks,

Leoung

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 sp2 - Doesn't playback sound

[Pierre Schiller]

Forgot to mention: Played wavs: 8k, 16k, 32k, 44khz. All good in mono and
stereo. Aiff on 32khz and 18khz
and even the sounds from the Audio folder at factory location.
All of those , in turn, before the install; didn´t play at all on SI 2014
sp2. Definetly something corrupted
something of .dll on a workgroup and messed the audio. Deleted old
preferences, wiped out all temp folders,
did a clean reinstall. Solved.

Cheers.

On Sun, Apr 9, 2017 at 3:38 PM, Pierre Schiller <
activemotionpictu...@gmail.com> wrote:

> I deleted everything related to SI 2014 on the Win registry.
> I deleted everything related to SI 2014, 2014 sp2 on C\users\blah blah
> Deleted everything on TEMP/ (everywhere Temp folders were)
> Restarted the machine.
> Reinstalled SI 2014 sp2.
> Tested SI right out of the box, it PLAYED SOUND.
> Did installed each one of the workgroups, (one by one, restarting
> softimage),
> testing of course (every time) if it broke the sound or not.
> Did installed the render engines.
> Tested sound again, nothing broke.
>
> So plainly said: I was copying my old pref folder for each of those first
> 3 times reinstall.
> Which in turn *had* some bug at somepoint.
>
> So decided to wipe out clean the reg and folders, and take the pain of
> reinstalling each one
> of everything back3h trot.
>
> It even fixed old bugs I had. Deng, pays to have separated folders for
> workgroups.
> Love SI tho´.
>
> Cheers.
>
>
> On Sun, Apr 9, 2017 at 9:56 AM, Orlando Esponda <orlando.espo...@gmail.com
> > wrote:
>
>> Have you tried with a different audio format?  The most common ones are
>> wav and aiff, with sample rates of 44.1 kHz and 48 kHz
>>
>> El abr. 6, 2017 10:42 PM, "Pierre Schiller" <
>> activemotionpictu...@gmail.com> escribió:
>>
>>> Hello everyone. For the past 3 days I've been pulling my hair on this
>>> one: appearently I messed some preferences on SI and now I can't playback
>>> sound on SI 2014.
>>> I tried that weird glitch about win7 registry on low volume for
>>> softimage and there is nothing wrong with registry.
>>> I also try on/off checkbox "audio scrub playback". No results.
>>> I uninstalled SI 2014 and everything related to it. Restarted the
>>> machine and reinstalled SI 2014. No good.
>>> I also tried runonce.bat (mentioned I'm missing fbx.dll something) just
>>> kept going. restarted SI. Nothing.
>>>
>>> Ok so I am basically done with the obvious options... is there anything
>>> else I should check? the only latest thing I've installed is adobe flash
>>> update.
>>>
>>> SI2015 plays audio just fine right out of the box.
>>>
>>> Please help
>>> Thanks.
>>>
>>> --
>>> Softimage Mailing List.
>>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>>> with "unsubscribe" in the subject, and reply to confirm.
>>>
>>
>> --
>> Softimage Mailing List.
>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>> with "unsubscribe" in the subject, and reply to confirm.
>>
>
>
>
> --
> Portfolio 2013 <http://be.net/3dcinetv>
> Cinema & TV production
> Video Reel <https://vimeo.com/3dcinetv/reel2012>
>



-- 
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 sp2 - Doesn't playback sound

[Pierre Schiller]

I deleted everything related to SI 2014 on the Win registry.
I deleted everything related to SI 2014, 2014 sp2 on C\users\blah blah
Deleted everything on TEMP/ (everywhere Temp folders were)
Restarted the machine.
Reinstalled SI 2014 sp2.
Tested SI right out of the box, it PLAYED SOUND.
Did installed each one of the workgroups, (one by one, restarting
softimage),
testing of course (every time) if it broke the sound or not.
Did installed the render engines.
Tested sound again, nothing broke.

So plainly said: I was copying my old pref folder for each of those first 3
times reinstall.
Which in turn *had* some bug at somepoint.

So decided to wipe out clean the reg and folders, and take the pain of
reinstalling each one
of everything back3h trot.

It even fixed old bugs I had. Deng, pays to have separated folders for
workgroups.
Love SI tho´.

Cheers.


On Sun, Apr 9, 2017 at 9:56 AM, Orlando Esponda <orlando.espo...@gmail.com>
wrote:

> Have you tried with a different audio format?  The most common ones are
> wav and aiff, with sample rates of 44.1 kHz and 48 kHz
>
> El abr. 6, 2017 10:42 PM, "Pierre Schiller" <activemotionpictures@gmail.
> com> escribió:
>
>> Hello everyone. For the past 3 days I've been pulling my hair on this
>> one: appearently I messed some preferences on SI and now I can't playback
>> sound on SI 2014.
>> I tried that weird glitch about win7 registry on low volume for softimage
>> and there is nothing wrong with registry.
>> I also try on/off checkbox "audio scrub playback". No results.
>> I uninstalled SI 2014 and everything related to it. Restarted the machine
>> and reinstalled SI 2014. No good.
>> I also tried runonce.bat (mentioned I'm missing fbx.dll something) just
>> kept going. restarted SI. Nothing.
>>
>> Ok so I am basically done with the obvious options... is there anything
>> else I should check? the only latest thing I've installed is adobe flash
>> update.
>>
>> SI2015 plays audio just fine right out of the box.
>>
>> Please help
>> Thanks.
>>
>> --
>> Softimage Mailing List.
>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>> with "unsubscribe" in the subject, and reply to confirm.
>>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>



-- 
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 sp2 - Doesn't playback sound

[Orlando Esponda]

Have you tried with a different audio format?  The most common ones are wav
and aiff, with sample rates of 44.1 kHz and 48 kHz

El abr. 6, 2017 10:42 PM, "Pierre Schiller" 
escribió:

> Hello everyone. For the past 3 days I've been pulling my hair on this one:
> appearently I messed some preferences on SI and now I can't playback sound
> on SI 2014.
> I tried that weird glitch about win7 registry on low volume for softimage
> and there is nothing wrong with registry.
> I also try on/off checkbox "audio scrub playback". No results.
> I uninstalled SI 2014 and everything related to it. Restarted the machine
> and reinstalled SI 2014. No good.
> I also tried runonce.bat (mentioned I'm missing fbx.dll something) just
> kept going. restarted SI. Nothing.
>
> Ok so I am basically done with the obvious options... is there anything
> else I should check? the only latest thing I've installed is adobe flash
> update.
>
> SI2015 plays audio just fine right out of the box.
>
> Please help
> Thanks.
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Softimage 2014 sp2 - Doesn't playback sound

[Pierre Schiller]

Hello everyone. For the past 3 days I've been pulling my hair on this one:
appearently I messed some preferences on SI and now I can't playback sound
on SI 2014.
I tried that weird glitch about win7 registry on low volume for softimage
and there is nothing wrong with registry.
I also try on/off checkbox "audio scrub playback". No results.
I uninstalled SI 2014 and everything related to it. Restarted the machine
and reinstalled SI 2014. No good.
I also tried runonce.bat (mentioned I'm missing fbx.dll something) just
kept going. restarted SI. Nothing.

Ok so I am basically done with the obvious options... is there anything
else I should check? the only latest thing I've installed is adobe flash
update.

SI2015 plays audio just fine right out of the box.

Please help
Thanks.
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Soft 2015 SP2 install

[Chris Marshall]

I've been toying with doing this but put off by the potential licensing
quagmire that's bound to strike.
Sorry I cant help but would be keen to know the workflow for doing this.


On 10 January 2017 at 11:21, adrian wyer <adrian.w...@fluid-pictures.com>
wrote:

> we had a combination of soft/maya and entcs licenses/serials
>
> we've been running soft 2015 which installs as part of the combined
> maya/soft installer
>
>
>
> now i'm trying to use the standalone installer for soft 2015 sp2 and i'm
> getting lost with serial numbers
>
>
>
> as far as i can see i've never been sent a 2015 serial, they're all for
> combined "mayas2015"
>
>
>
> should i be using that serial/product code to install the 2015sp2 stand
> alone??
>
>
>
> very confused!
>
>
>
> a
>
>
>
> Adrian Wyer
> Fluid Pictures
> 4th Floor
> 4 Bath Place
> Rivington Street
> London
> EC2A 3DR
> ++44(0) 207 580 0829 <+44%2020%207580%200829>
>
>
> adrian.w...@fluid-pictures.com
>
> www.fluid-pictures.com
>
>
>
> Fluid Pictures Limited is registered in England and Wales.
> Company number:5657815
> VAT number: 872 6893 71
>
>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>



-- 
Chris Marshall
Mint Motion Limited
029 20 37 27 57
07730 533 115
www.mintmotion.co.uk
www.dot3d.com
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

RE: Soft 2015 SP2 install

[adrian wyer]

never mind, pebkac

 

a

 

Adrian Wyer
Fluid Pictures
4th Floor
4 Bath Place
Rivington Street
London
EC2A 3DR 
++44(0) 207 580 0829 


adrian.w...@fluid-pictures.com

www.fluid-pictures.com
<blocked::blocked::blocked::blocked::blocked::http://www.fluid-pictures.com/
>  

 

Fluid Pictures Limited is registered in England and Wales.
Company number:5657815
VAT number: 872 6893 71

  _  

From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of adrian wyer
Sent: 10 January 2017 11:22
To: softimage@listproc.autodesk.com
Subject: Soft 2015 SP2 install

 

we had a combination of soft/maya and entcs licenses/serials

we've been running soft 2015 which installs as part of the combined
maya/soft installer

 

now i'm trying to use the standalone installer for soft 2015 sp2 and i'm
getting lost with serial numbers

 

as far as i can see i've never been sent a 2015 serial, they're all for
combined "mayas2015" 

 

should i be using that serial/product code to install the 2015sp2 stand
alone??

 

very confused!

 

a

 

Adrian Wyer
Fluid Pictures
4th Floor
4 Bath Place
Rivington Street
London
EC2A 3DR 
++44(0) 207 580 0829 


adrian.w...@fluid-pictures.com

www.fluid-pictures.com
<blocked::blocked::blocked::blocked::blocked::http://www.fluid-pictures.com/
>  

 

Fluid Pictures Limited is registered in England and Wales.
Company number:5657815
VAT number: 872 6893 71

 

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Soft 2015 SP2 install

[adrian wyer]

we had a combination of soft/maya and entcs licenses/serials

we've been running soft 2015 which installs as part of the combined
maya/soft installer

 

now i'm trying to use the standalone installer for soft 2015 sp2 and i'm
getting lost with serial numbers

 

as far as i can see i've never been sent a 2015 serial, they're all for
combined "mayas2015" 

 

should i be using that serial/product code to install the 2015sp2 stand
alone??

 

very confused!

 

a

 

Adrian Wyer
Fluid Pictures
4th Floor
4 Bath Place
Rivington Street
London
EC2A 3DR 
++44(0) 207 580 0829 


adrian.w...@fluid-pictures.com

www.fluid-pictures.com
<blocked::blocked::blocked::blocked::blocked::http://www.fluid-pictures.com/
>  

 

Fluid Pictures Limited is registered in England and Wales.
Company number:5657815
VAT number: 872 6893 71

 

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Morten Bartholdy]

Interesting. I have almost given up using the Material Manage on some projects 
because it crashes XSI instantly - and I have shaderballs turned off. These are 
usually what I consider dirty scenes with lots of data coming from Maya from a 
non vfx pipeline, and I rarely have issues with stuff I create myself.
Bad headers is a thing to look for then, but given that I use Arnold texture 
workflow it should not be an issue, unless there are leftovers somewhere in the 
scene.

Morten


> Den 11. november 2016 klokken 16:33 skrev Pierre Schiller 
> :
> 
> 
> Thanks. Yes, I handled it there as well. Finally came to the culprit on
> this: a .png and a .jpg corrupted header data
> (displaying good, but reading bad) and this crushed the entire SI.
> 
> Cheers.
> 
> On Fri, Nov 11, 2016 at 7:16 AM, Morten Bartholdy 
> wrote:
> 
> > If you are just repathing textures this is easily done in the External
> > Files Manager.
> >
> > MB
> >
> >
> > > Den 10. november 2016 klokken 00:35 skrev Pierre Schiller <
> > activemotionpictu...@gmail.com>:
> > >
> > >
> > > Merge worked. Thanks everyone for your help.
> > > Though I will try to turn off preview ball on Mat Editor. Thanks :)
> > >
> > > On Wed, Nov 9, 2016 at 3:17 AM, Rob Wuijster  wrote:
> > >
> > > > Or, if that doesn't help, try to merge the scene into a new one.
> > > > As it is crashing on another pc as well, it could be the scene itself.
> > > >
> > > > Rob
> > > >
> > > > \/-\/\/
> > > >
> > > > On 8-11-2016 22:59, Tenshi Sama wrote:
> > > >
> > > > Exactly, turn off the thumbnail preview. I have the same issues a while
> > > > ago, now i only have "text" materials.; but only in the Material
> > Manager;
> > > > in the render tree i always have thumbnails on.
> > > >
> > > > On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson <
> > magic...@bellsouth.net>
> > > > wrote:
> > > >
> > > >> Turn off the material ball preview, then load your scene.
> > > >>
> > > >> Best Regards,
> > > >> *  Stephen P. Davidson*
> > > >>
> > > >> *(954) 552-7956 <%28954%29%20552-7956> *
> > > >> sdavid...@3danimationmagic.com
> > > >>
> > > >> 3D Animation Magic Facebook page
> > > >> 
> > > >>
> > > >> *Any sufficiently advanced technology is indistinguishable from magic*
> > > >>
> > > >>
> > > >>- Arthur C. Clarke
> > > >>
> > > >> 
> > > >>
> > > >> On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
> > > >> activemotionpictu...@gmail.com> wrote:
> > > >>
> > > >>> Hello everyone. I´m on a tight deadline, and I have been using arnold
> > > >>> 3.13.0 for my renders.
> > > >>> It all went fine until 2 days ago. My scene crashes every time I
> > dare to
> > > >>> touch the material editor /or/ resize it. I´m cheking the sources
> > for all
> > > >>> of my textures to be path relative to the user of the project folder,
> > > >>> instead of a full path. (pictures/texture/diffuse1K.jpg - is
> > desired)
> > > >>> so I can later share the project.
> > > >>>
> > > >>> But SI crashes. I can´t repath all my textures.
> > > >>>
> > > >>> I followed the recommendations on ex-xsi about leaving the mat editor
> > > >>> open, then opening the scene, but I can´t even start scrolling and
> > the
> > > >>> material editor window, crashes softimage (goes blank). I tested it
> > on
> > > >>> another machine with SI 2015 and goes kap00t as well.
> > > >>>
> > > >>> Please, if anyone could give me directions on where to check, I´d be
> > > >>> more than thankful.
> > > >>>
> > > >>> ps: I have also deleted all backup folders for the scene. Cleared all
> > > >>> .tmp files from windows. but I can´t think of a work around on this
> > one.
> > > >>>
> > > >>> Best regards.
> > > >>> David.
> > > >>>
> > > >>> --
> > > >>> Portfolio 2013 
> > > >>> Cinema & TV production
> > > >>> Video Reel 
> > > >>> --
> > > >>> Softimage Mailing List.
> > > >>> To unsubscribe, send a mail to softimage-request@listproc.
> > autodesk.com
> > > >>> with "unsubscribe" in the subject, and reply to confirm.
> > > >>
> > > >>
> > > >> --
> > > >> Softimage Mailing List.
> > > >> To unsubscribe, send a mail to softimage-request@listproc.
> > autodesk.com
> > > >> with "unsubscribe" in the subject, and reply to confirm.
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > Diseñador 3D/Multimedia
> > > > web: https://tenshi.carbonmade.com
> > > > # Cel/Whatsapp: (+593) 0984104698
> > > > Guayaquil/Quito-Ecuador
> > > >
> > > >
> > > > --
> > > > Softimage Mailing List.
> > > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> > with "unsubscribe" in the subject, and reply to confirm.
> > > >
> > > >
> > > >
> > > > --
> > > > Softimage Mailing List.
> > > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> > > > with 

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Pierre Schiller]

Thanks. Yes, I handled it there as well. Finally came to the culprit on
this: a .png and a .jpg corrupted header data
(displaying good, but reading bad) and this crushed the entire SI.

Cheers.

On Fri, Nov 11, 2016 at 7:16 AM, Morten Bartholdy 
wrote:

> If you are just repathing textures this is easily done in the External
> Files Manager.
>
> MB
>
>
> > Den 10. november 2016 klokken 00:35 skrev Pierre Schiller <
> activemotionpictu...@gmail.com>:
> >
> >
> > Merge worked. Thanks everyone for your help.
> > Though I will try to turn off preview ball on Mat Editor. Thanks :)
> >
> > On Wed, Nov 9, 2016 at 3:17 AM, Rob Wuijster  wrote:
> >
> > > Or, if that doesn't help, try to merge the scene into a new one.
> > > As it is crashing on another pc as well, it could be the scene itself.
> > >
> > > Rob
> > >
> > > \/-\/\/
> > >
> > > On 8-11-2016 22:59, Tenshi Sama wrote:
> > >
> > > Exactly, turn off the thumbnail preview. I have the same issues a while
> > > ago, now i only have "text" materials.; but only in the Material
> Manager;
> > > in the render tree i always have thumbnails on.
> > >
> > > On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson <
> magic...@bellsouth.net>
> > > wrote:
> > >
> > >> Turn off the material ball preview, then load your scene.
> > >>
> > >> Best Regards,
> > >> *  Stephen P. Davidson*
> > >>
> > >> *(954) 552-7956 <%28954%29%20552-7956> *
> > >> sdavid...@3danimationmagic.com
> > >>
> > >> 3D Animation Magic Facebook page
> > >> 
> > >>
> > >> *Any sufficiently advanced technology is indistinguishable from magic*
> > >>
> > >>
> > >>- Arthur C. Clarke
> > >>
> > >> 
> > >>
> > >> On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
> > >> activemotionpictu...@gmail.com> wrote:
> > >>
> > >>> Hello everyone. I´m on a tight deadline, and I have been using arnold
> > >>> 3.13.0 for my renders.
> > >>> It all went fine until 2 days ago. My scene crashes every time I
> dare to
> > >>> touch the material editor /or/ resize it. I´m cheking the sources
> for all
> > >>> of my textures to be path relative to the user of the project folder,
> > >>> instead of a full path. (pictures/texture/diffuse1K.jpg - is
> desired)
> > >>> so I can later share the project.
> > >>>
> > >>> But SI crashes. I can´t repath all my textures.
> > >>>
> > >>> I followed the recommendations on ex-xsi about leaving the mat editor
> > >>> open, then opening the scene, but I can´t even start scrolling and
> the
> > >>> material editor window, crashes softimage (goes blank). I tested it
> on
> > >>> another machine with SI 2015 and goes kap00t as well.
> > >>>
> > >>> Please, if anyone could give me directions on where to check, I´d be
> > >>> more than thankful.
> > >>>
> > >>> ps: I have also deleted all backup folders for the scene. Cleared all
> > >>> .tmp files from windows. but I can´t think of a work around on this
> one.
> > >>>
> > >>> Best regards.
> > >>> David.
> > >>>
> > >>> --
> > >>> Portfolio 2013 
> > >>> Cinema & TV production
> > >>> Video Reel 
> > >>> --
> > >>> Softimage Mailing List.
> > >>> To unsubscribe, send a mail to softimage-request@listproc.
> autodesk.com
> > >>> with "unsubscribe" in the subject, and reply to confirm.
> > >>
> > >>
> > >> --
> > >> Softimage Mailing List.
> > >> To unsubscribe, send a mail to softimage-request@listproc.
> autodesk.com
> > >> with "unsubscribe" in the subject, and reply to confirm.
> > >>
> > >
> > >
> > >
> > > --
> > > Diseñador 3D/Multimedia
> > > web: https://tenshi.carbonmade.com
> > > # Cel/Whatsapp: (+593) 0984104698
> > > Guayaquil/Quito-Ecuador
> > >
> > >
> > > --
> > > Softimage Mailing List.
> > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
> > >
> > >
> > >
> > > --
> > > Softimage Mailing List.
> > > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> > > with "unsubscribe" in the subject, and reply to confirm.
> > >
> >
> >
> >
> > --
> > Portfolio 2013 
> > Cinema & TV production
> > Video Reel 
> > --
> > Softimage Mailing List.
> > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>



-- 
Portfolio 2013 
Cinema & TV production
Video Reel 
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Morten Bartholdy]

If you are just repathing textures this is easily done in the External Files 
Manager.

MB


> Den 10. november 2016 klokken 00:35 skrev Pierre Schiller 
> :
> 
> 
> Merge worked. Thanks everyone for your help.
> Though I will try to turn off preview ball on Mat Editor. Thanks :)
> 
> On Wed, Nov 9, 2016 at 3:17 AM, Rob Wuijster  wrote:
> 
> > Or, if that doesn't help, try to merge the scene into a new one.
> > As it is crashing on another pc as well, it could be the scene itself.
> >
> > Rob
> >
> > \/-\/\/
> >
> > On 8-11-2016 22:59, Tenshi Sama wrote:
> >
> > Exactly, turn off the thumbnail preview. I have the same issues a while
> > ago, now i only have "text" materials.; but only in the Material Manager;
> > in the render tree i always have thumbnails on.
> >
> > On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson 
> > wrote:
> >
> >> Turn off the material ball preview, then load your scene.
> >>
> >> Best Regards,
> >> *  Stephen P. Davidson*
> >>
> >> *(954) 552-7956 <%28954%29%20552-7956> *
> >> sdavid...@3danimationmagic.com
> >>
> >> 3D Animation Magic Facebook page
> >> 
> >>
> >> *Any sufficiently advanced technology is indistinguishable from magic*
> >>
> >>
> >>- Arthur C. Clarke
> >>
> >> 
> >>
> >> On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
> >> activemotionpictu...@gmail.com> wrote:
> >>
> >>> Hello everyone. I´m on a tight deadline, and I have been using arnold
> >>> 3.13.0 for my renders.
> >>> It all went fine until 2 days ago. My scene crashes every time I dare to
> >>> touch the material editor /or/ resize it. I´m cheking the sources for all
> >>> of my textures to be path relative to the user of the project folder,
> >>> instead of a full path. (pictures/texture/diffuse1K.jpg - is desired)
> >>> so I can later share the project.
> >>>
> >>> But SI crashes. I can´t repath all my textures.
> >>>
> >>> I followed the recommendations on ex-xsi about leaving the mat editor
> >>> open, then opening the scene, but I can´t even start scrolling and the
> >>> material editor window, crashes softimage (goes blank). I tested it on
> >>> another machine with SI 2015 and goes kap00t as well.
> >>>
> >>> Please, if anyone could give me directions on where to check, I´d be
> >>> more than thankful.
> >>>
> >>> ps: I have also deleted all backup folders for the scene. Cleared all
> >>> .tmp files from windows. but I can´t think of a work around on this one.
> >>>
> >>> Best regards.
> >>> David.
> >>>
> >>> --
> >>> Portfolio 2013 
> >>> Cinema & TV production
> >>> Video Reel 
> >>> --
> >>> Softimage Mailing List.
> >>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> >>> with "unsubscribe" in the subject, and reply to confirm.
> >>
> >>
> >> --
> >> Softimage Mailing List.
> >> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> >> with "unsubscribe" in the subject, and reply to confirm.
> >>
> >
> >
> >
> > --
> > Diseñador 3D/Multimedia
> > web: https://tenshi.carbonmade.com
> > # Cel/Whatsapp: (+593) 0984104698
> > Guayaquil/Quito-Ecuador
> >
> >
> > --
> > Softimage Mailing List.
> > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> > "unsubscribe" in the subject, and reply to confirm.
> >
> >
> >
> > --
> > Softimage Mailing List.
> > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> > with "unsubscribe" in the subject, and reply to confirm.
> >
> 
> 
> 
> -- 
> Portfolio 2013 
> Cinema & TV production
> Video Reel 
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Pierre Schiller]

Merge worked. Thanks everyone for your help.
Though I will try to turn off preview ball on Mat Editor. Thanks :)

On Wed, Nov 9, 2016 at 3:17 AM, Rob Wuijster  wrote:

> Or, if that doesn't help, try to merge the scene into a new one.
> As it is crashing on another pc as well, it could be the scene itself.
>
> Rob
>
> \/-\/\/
>
> On 8-11-2016 22:59, Tenshi Sama wrote:
>
> Exactly, turn off the thumbnail preview. I have the same issues a while
> ago, now i only have "text" materials.; but only in the Material Manager;
> in the render tree i always have thumbnails on.
>
> On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson 
> wrote:
>
>> Turn off the material ball preview, then load your scene.
>>
>> Best Regards,
>> *  Stephen P. Davidson*
>>
>> *(954) 552-7956 <%28954%29%20552-7956> *
>> sdavid...@3danimationmagic.com
>>
>> 3D Animation Magic Facebook page
>> 
>>
>> *Any sufficiently advanced technology is indistinguishable from magic*
>>
>>
>>- Arthur C. Clarke
>>
>> 
>>
>> On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
>> activemotionpictu...@gmail.com> wrote:
>>
>>> Hello everyone. I´m on a tight deadline, and I have been using arnold
>>> 3.13.0 for my renders.
>>> It all went fine until 2 days ago. My scene crashes every time I dare to
>>> touch the material editor /or/ resize it. I´m cheking the sources for all
>>> of my textures to be path relative to the user of the project folder,
>>> instead of a full path. (pictures/texture/diffuse1K.jpg - is desired)
>>> so I can later share the project.
>>>
>>> But SI crashes. I can´t repath all my textures.
>>>
>>> I followed the recommendations on ex-xsi about leaving the mat editor
>>> open, then opening the scene, but I can´t even start scrolling and the
>>> material editor window, crashes softimage (goes blank). I tested it on
>>> another machine with SI 2015 and goes kap00t as well.
>>>
>>> Please, if anyone could give me directions on where to check, I´d be
>>> more than thankful.
>>>
>>> ps: I have also deleted all backup folders for the scene. Cleared all
>>> .tmp files from windows. but I can´t think of a work around on this one.
>>>
>>> Best regards.
>>> David.
>>>
>>> --
>>> Portfolio 2013 
>>> Cinema & TV production
>>> Video Reel 
>>> --
>>> Softimage Mailing List.
>>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>>> with "unsubscribe" in the subject, and reply to confirm.
>>
>>
>> --
>> Softimage Mailing List.
>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>> with "unsubscribe" in the subject, and reply to confirm.
>>
>
>
>
> --
> Diseñador 3D/Multimedia
> web: https://tenshi.carbonmade.com
> # Cel/Whatsapp: (+593) 0984104698
> Guayaquil/Quito-Ecuador
>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.
>
>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>



-- 
Portfolio 2013 
Cinema & TV production
Video Reel 
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Rob Wuijster]

Or, if that doesn't help, try to merge the scene into a new one.
As it is crashing on another pc as well, it could be the scene itself.

Rob

\/-\/\/

On 8-11-2016 22:59, Tenshi Sama wrote:
Exactly, turn off the thumbnail preview. I have the same issues a 
while ago, now i only have "text" materials.; but only in the Material 
Manager; in the render tree i always have thumbnails on.


On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson 
> wrote:


Turn off the material ball preview, then load your scene.

Best Regards,
*  Stephen P. Davidson**
**(954) 552-7956 
* sdavid...@3danimationmagic.com

3D Animation Magic Facebook page


/Any sufficiently advanced technology is indistinguishable from magic/

   - Arthur C. Clarke




On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller
> wrote:

Hello everyone. I´m on a tight deadline, and I have been using
arnold 3.13.0 for my renders.
It all went fine until 2 days ago. My scene crashes every time
I dare to touch the material editor /or/ resize it. I´m
cheking the sources for all of my textures to be path relative
to the user of the project folder, instead of a full path.
(pictures/texture/diffuse1K.jpg - is desired) so I can later
share the project.

But SI crashes. I can´t repath all my textures.

I followed the recommendations on ex-xsi about leaving the mat
editor open, then opening the scene, but I can´t even start
scrolling and the material editor window, crashes softimage
(goes blank). I tested it on another machine with SI 2015 and
goes kap00t as well.

Please, if anyone could give me directions on where to check,
I´d be more than thankful.

ps: I have also deleted all backup folders for the scene.
Cleared all .tmp files from windows. but I can´t think of a
work around on this one.

Best regards.
David.

-- 
Portfolio 2013 

Cinema & TV production
Video Reel 
--
Softimage Mailing List.
To unsubscribe, send a mail to
softimage-requ...@listproc.autodesk.com
 with
"unsubscribe" in the subject, and reply to confirm.


--
Softimage Mailing List.
To unsubscribe, send a mail to
softimage-requ...@listproc.autodesk.com
 with
"unsubscribe" in the subject, and reply to confirm.




--
Diseñador 3D/Multimedia
web: https://tenshi.carbonmade.com
# Cel/Whatsapp: (+593) 0984104698
Guayaquil/Quito-Ecuador


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.


--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Tenshi Sama]

Exactly, turn off the thumbnail preview. I have the same issues a while
ago, now i only have "text" materials.; but only in the Material Manager;
in the render tree i always have thumbnails on.

On Tue, Nov 8, 2016 at 4:55 PM, Stephen Davidson 
wrote:

> Turn off the material ball preview, then load your scene.
>
> Best Regards,
> *  Stephen P. Davidson*
>
> *(954) 552-7956 <%28954%29%20552-7956>*sdavid...@3danimationmagic.com
>
> 3D Animation Magic Facebook page
> 
>
> *Any sufficiently advanced technology is indistinguishable from magic*
>
>
>- Arthur C. Clarke
>
> 
>
> On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
> activemotionpictu...@gmail.com> wrote:
>
>> Hello everyone. I´m on a tight deadline, and I have been using arnold
>> 3.13.0 for my renders.
>> It all went fine until 2 days ago. My scene crashes every time I dare to
>> touch the material editor /or/ resize it. I´m cheking the sources for all
>> of my textures to be path relative to the user of the project folder,
>> instead of a full path. (pictures/texture/diffuse1K.jpg - is desired) so
>> I can later share the project.
>>
>> But SI crashes. I can´t repath all my textures.
>>
>> I followed the recommendations on ex-xsi about leaving the mat editor
>> open, then opening the scene, but I can´t even start scrolling and the
>> material editor window, crashes softimage (goes blank). I tested it on
>> another machine with SI 2015 and goes kap00t as well.
>>
>> Please, if anyone could give me directions on where to check, I´d be more
>> than thankful.
>>
>> ps: I have also deleted all backup folders for the scene. Cleared all
>> .tmp files from windows. but I can´t think of a work around on this one.
>>
>> Best regards.
>> David.
>>
>> --
>> Portfolio 2013 
>> Cinema & TV production
>> Video Reel 
>> --
>> Softimage Mailing List.
>> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
>> with "unsubscribe" in the subject, and reply to confirm.
>
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>



-- 
Diseñador 3D/Multimedia
web: https://tenshi.carbonmade.com
# Cel/Whatsapp: (+593) 0984104698
Guayaquil/Quito-Ecuador
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2014 SP2 - Crashing when opening material editor

[Stephen Davidson]

Turn off the material ball preview, then load your scene.

Best Regards,
*  Stephen P. Davidson*

*(954) 552-7956*sdavid...@3danimationmagic.com

3D Animation Magic Facebook page


*Any sufficiently advanced technology is indistinguishable from magic*


 - Arthur C. Clarke



On Tue, Nov 8, 2016 at 4:43 PM Pierre Schiller <
activemotionpictu...@gmail.com> wrote:

> Hello everyone. I´m on a tight deadline, and I have been using arnold
> 3.13.0 for my renders.
> It all went fine until 2 days ago. My scene crashes every time I dare to
> touch the material editor /or/ resize it. I´m cheking the sources for all
> of my textures to be path relative to the user of the project folder,
> instead of a full path. (pictures/texture/diffuse1K.jpg - is desired) so I
> can later share the project.
>
> But SI crashes. I can´t repath all my textures.
>
> I followed the recommendations on ex-xsi about leaving the mat editor
> open, then opening the scene, but I can´t even start scrolling and the
> material editor window, crashes softimage (goes blank). I tested it on
> another machine with SI 2015 and goes kap00t as well.
>
> Please, if anyone could give me directions on where to check, I´d be more
> than thankful.
>
> ps: I have also deleted all backup folders for the scene. Cleared all .tmp
> files from windows. but I can´t think of a work around on this one.
>
> Best regards.
> David.
>
> --
> Portfolio 2013 
> Cinema & TV production
> Video Reel 
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Softimage 2014 SP2 - Crashing when opening material editor

[Pierre Schiller]

Hello everyone. I´m on a tight deadline, and I have been using arnold
3.13.0 for my renders.
It all went fine until 2 days ago. My scene crashes every time I dare to
touch the material editor /or/ resize it. I´m cheking the sources for all
of my textures to be path relative to the user of the project folder,
instead of a full path. (pictures/texture/diffuse1K.jpg - is desired) so I
can later share the project.

But SI crashes. I can´t repath all my textures.

I followed the recommendations on ex-xsi about leaving the mat editor open,
then opening the scene, but I can´t even start scrolling and the material
editor window, crashes softimage (goes blank). I tested it on another
machine with SI 2015 and goes kap00t as well.

Please, if anyone could give me directions on where to check, I´d be more
than thankful.

ps: I have also deleted all backup folders for the scene. Cleared all .tmp
files from windows. but I can´t think of a work around on this one.

Best regards.
David.

-- 
Portfolio 2013 
Cinema & TV production
Video Reel 
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2015 SP2 Crashes due to scrubbing

[Nuno Conceicao]

Hi Lawrence

I think I found that thread and Stephen Blair mentioned this was fixed in
Softimage 2014 SP1.
Looks like that this was related to SitoA2.10, we use SitoA also, but a
more recent release, in any case this seems like a Softimage bug that
wasn't completely addressed since it still happens in 2015 Sp2.

Not sure if there is still going to be a last Softimage patch, but is there
anyone on Autodesk still looking at this group





On Mon, Dec 23, 2013 at 5:41 AM, Rob Wuijster <r...@casema.nl> wrote:

> Hi all,
>
> I had this issue before, and am pretty sure this was fixed. The issue had
> to do with 3rd party renderers and the AE.
> Select some points on a curve, change timing vy typing a new value.
> Instant crash.
>
> It worked till now, but suddenly pops up it's ugly head again. SI2013SP1,
> SitoA2.10
>
> Anyone on this? Nothing new on the plugin/workgroup side btw.
>


On Thu, Mar 17, 2016 at 6:29 PM, Softimage <lp3ds...@gmail.com> wrote:

> Hi Nuno,
> There was a posting a while back similar to this, I think in the end it
> was related to having a 3rd party renderer installed, even though it wasn't
> been used!  If you've got one maybe try uninstalling and see if it persists.
>
> Cheers
>
> Lawrence
>
> > On 17 Mar 2016, at 10:36, Nuno Conceicao <nunoalexconcei...@gmail.com>
> wrote:
> >
> > Hi guys
> > Was wondering if anyone else has experienced crashes just by scrubbing
> the timeline on medium to heavy scenes.
> > It's just that we have been plagued by this issue since Softimage 2014
> across different projects and specialties, not just animation scenes, but
> layout or render scenes...
> > I'm wondering what could be the cause since we are totally clueless
> > :(
> >
> > Nuno
> > --
> > Softimage Mailing List.
> > To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com
> with "unsubscribe" in the subject, and reply to confirm.
>
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Softimage 2015 SP2 Crashes due to scrubbing

[Nuno Conceicao]

Hi guys
Was wondering if anyone else has experienced crashes just by scrubbing the
timeline on medium to heavy scenes.
It's just that we have been plagued by this issue since Softimage 2014
across different projects and specialties, not just animation scenes, but
layout or render scenes...
I'm wondering what could be the cause since we are totally clueless
:(

Nuno
--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Softimage 2015 SP2 Crashes due to scrubbing

[Softimage]

Hi Nuno,
There was a posting a while back similar to this, I think in the end it was 
related to having a 3rd party renderer installed, even though it wasn't been 
used!  If you've got one maybe try uninstalling and see if it persists.

Cheers 

Lawrence 

> On 17 Mar 2016, at 10:36, Nuno Conceicao  wrote:
> 
> Hi guys
> Was wondering if anyone else has experienced crashes just by scrubbing the 
> timeline on medium to heavy scenes.
> It's just that we have been plagued by this issue since Softimage 2014  
> across different projects and specialties, not just animation scenes, but 
> layout or render scenes...
> I'm wondering what could be the cause since we are totally clueless
> :(
> 
> Nuno
> --
> Softimage Mailing List.
> To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
> "unsubscribe" in the subject, and reply to confirm.

--
Softimage Mailing List.
To unsubscribe, send a mail to softimage-requ...@listproc.autodesk.com with 
"unsubscribe" in the subject, and reply to confirm.

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Leendert A. Hartog]

Just never thought of having to update the license file as well, as I 
figured the MayaS 2016 file would still be valid for the SP2 as well...

Thanks for your patience, all...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht- 
From: Maurice Patel

Sent: Thursday, December 10, 2015 8:13 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Cool! I am glad it all worked out in the end. Sorry that you had to go 
through this.

Maurice

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. 
Hartog

Sent: Thursday, December 10, 2015 2:11 PM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Problem solved...
After going back to registeronce and getting a new license file, there does 
appear to have been something wrong with my original license file,
dating from the time when the MayaS 2016 bundle was first released, as it 
was missing an "INCREMENT 86269SFTIMSIB_2016_0F" block.

With this new license everything seems to work as expected.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: hk-v...@iscs-i.com<mailto:hk-v...@iscs-i.com>
Sent: Thursday, December 10, 2015 6:23 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Cc: Leendert A. Hartog<mailto:hirazib...@live.nl>
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")


Have you tried Autodesk's licensing parser to validate your file:

http://www.licenseparser.com/

Cheers,

Henry

On 2015-12-10 10:17, Leendert A. Hartog wrote:

Could there be something wrong with my license file?

Is there someone who could check this, where I could send my current license 
file to?


Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it,

Only problem I've faced so far are the missing "2016" batch licenses...



Greetz

Leendert

AKA Hirazi Blue

Softimage hobbyist, admin at si-community.com & xsiforum.de



-Oorspronkelijk bericht- From: Maurice Patel

Sent: Thursday, December 10, 2015 4:44 PM

To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>

Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")



I can help clarify. There is no difference. There was no Softimage 2016 so 
for the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' 
had to be created for Softimage 2015 to go into the new offering. This was 
the R2 version and apart from licensing requirements there was no change in 
the software. The only software updates have been the service packs which 
were issued separately. Our QA team reported today that they have not yet 
identified an issue in their tests (Batch is working) but that they are 
continuing to look into this.




Maurice Patel

Tél:  514 954-7134

Cell: 514 242-6549



-Original Message-

From: 
softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> 
[mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>] 
On Behalf Of Ponthieux, Joseph G. (LARC-E1A)[LITES II]


Sent: Thursday, December 10, 2015 9:53 AM

To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>

Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")



I just installed 2016 ECSU and recalled seeing this in the release notes:





https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s

uites_2016_readme_enu.htm



The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites 
and keep it's identity as a suite component for reference. Thing is it says 
that that version with the 2016 suite is not "Softimage 2016 R2" but 
"Softimage 2015 R2" and that 2015 R2 only works with 2016 license keys.


The installer doesn't install it automatically as in the past, but it does 
copy the necessary installation package to do so manually. I never installed 
it, figured I'd wait till next year to see if a final SP comes out.




Looking at these notes you'd think the only thing they spend any time 
working on is FBX but all you have to do is open Maya 2016 to know that¹s 
not the case. It would be nice though to have more information on what if 
anything makes these Softimage versions any different, assuming they might 
be.




Joey









On 12/9/15 5:15 PM, 
"softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com> 
on behalf of Leendert A. Hartog" 
<softimage-boun...@listproc.autodes

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Leendert A. Hartog]

Problem solved...
After going back to registeronce and getting a new license file, there does 
appear to have been something wrong with my original license file, 
dating from the time when the MayaS 2016 bundle was first released, as it was 
missing an "INCREMENT 86269SFTIMSIB_2016_0F" block. 
With this new license everything seems to work as expected.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: hk-v...@iscs-i.com 
Sent: Thursday, December 10, 2015 6:23 PM
To: softimage@listproc.autodesk.com 
Cc: Leendert A. Hartog 
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Have you tried Autodesk's licensing parser to validate your file:

http://www.licenseparser.com/

Cheers,

Henry

On 2015-12-10 10:17, Leendert A. Hartog wrote:

Could there be something wrong with my license file?
Is there someone who could check this, where I could send my current license 
file to?
Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it,
Only problem I've faced so far are the missing "2016" batch licenses...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht- From: Maurice Patel
Sent: Thursday, December 10, 2015 4:44 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I can help clarify. There is no difference. There was no Softimage 2016 so for 
the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' had to 
be created for Softimage 2015 to go into the new offering. This was the R2 
version and apart from licensing requirements there was no change in the 
software. The only software updates have been the service packs which were 
issued separately. Our QA team reported today that they have not yet identified 
an issue in their tests (Batch is working) but that they are continuing to look 
into this.

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Ponthieux, Joseph 
G. (LARC-E1A)[LITES II]
Sent: Thursday, December 10, 2015 9:53 AM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I just installed 2016 ECSU and recalled seeing this in the release notes:


https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s
uites_2016_readme_enu.htm

The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites and 
keep it's identity as a suite component for reference. Thing is it says that 
that version with the 2016 suite is not "Softimage 2016 R2" but "Softimage 2015 
R2" and that 2015 R2 only works with 2016 license keys.
The installer doesn't install it automatically as in the past, but it does copy 
the necessary installation package to do so manually. I never installed it, 
figured I'd wait till next year to see if a final SP comes out.

Looking at these notes you'd think the only thing they spend any time working 
on is FBX but all you have to do is open Maya 2016 to know that¹s not the case. 
It would be nice though to have more information on what if anything makes 
these Softimage versions any different, assuming they might be.

Joey




On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of 
Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of 
hirazib...@live.nl> wrote:Thanks. The installed version is the R2-SP2 that is 
bundled with the license for Maya 2016. It was my impression that SP2 and R2-SP 
weren't identical, otherwise there wouldn't be a reason to distribute two 
different versions. But I could be mistaken... Greetz Leendert AKA Hirazi Blue 
Softimage hobbyist, admin at si-community.com & xsiforum.de -Oorspronkelijk 
bericht- From: Ponthieux, Joseph G. (LARC-E1A)[LITES II] Sent: Wednesday, 
December 9, 2015 10:58 PM To: softimage@listproc.autodesk.com Subject: RE: 
Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F") Leendert, Is your install 
base strictly Softimage or is it a suite? I presume whatever it is it must be 
installed from a 2016 package? There was a warning somewhere that said the two 
versions should not be installed at the same time. Is it possible you have both 
installed somehow? When I run xsibatch here using the 2015 version, it tells me 
it is checking out: === 
Autodesk Softimage 13.0.114.0 
=== License information: 
using [86269SFTIMSIB_2015_0F] I don't have SI 2016 R2 installed. If your 
version is looking to something with 2016 license code in it, it must be the SI 
2016 R2 ver

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Maurice Patel]

Cool! I am glad it all worked out in the end. Sorry that you had to go through 
this.
Maurice

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
Sent: Thursday, December 10, 2015 2:11 PM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Problem solved...
After going back to registeronce and getting a new license file, there does 
appear to have been something wrong with my original license file,
dating from the time when the MayaS 2016 bundle was first released, as it was 
missing an "INCREMENT 86269SFTIMSIB_2016_0F" block.
With this new license everything seems to work as expected.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: hk-v...@iscs-i.com<mailto:hk-v...@iscs-i.com>
Sent: Thursday, December 10, 2015 6:23 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Cc: Leendert A. Hartog<mailto:hirazib...@live.nl>
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")


Have you tried Autodesk's licensing parser to validate your file:

http://www.licenseparser.com/

Cheers,

Henry

On 2015-12-10 10:17, Leendert A. Hartog wrote:

Could there be something wrong with my license file?

Is there someone who could check this, where I could send my current license 
file to?

Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it,

Only problem I've faced so far are the missing "2016" batch licenses...



Greetz

Leendert

AKA Hirazi Blue

Softimage hobbyist, admin at si-community.com & xsiforum.de



-Oorspronkelijk bericht- From: Maurice Patel

Sent: Thursday, December 10, 2015 4:44 PM

To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>

Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")



I can help clarify. There is no difference. There was no Softimage 2016 so for 
the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' had to 
be created for Softimage 2015 to go into the new offering. This was the R2 
version and apart from licensing requirements there was no change in the 
software. The only software updates have been the service packs which were 
issued separately. Our QA team reported today that they have not yet identified 
an issue in their tests (Batch is working) but that they are continuing to look 
into this.



Maurice Patel

Tél:  514 954-7134

Cell: 514 242-6549



-Original Message-

From: 
softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>
 
[mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>]
 On Behalf Of Ponthieux, Joseph G. (LARC-E1A)[LITES II]

Sent: Thursday, December 10, 2015 9:53 AM

To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>

Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")



I just installed 2016 ECSU and recalled seeing this in the release notes:





https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s

uites_2016_readme_enu.htm



The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites and 
keep it's identity as a suite component for reference. Thing is it says that 
that version with the 2016 suite is not "Softimage 2016 R2" but "Softimage 2015 
R2" and that 2015 R2 only works with 2016 license keys.

The installer doesn't install it automatically as in the past, but it does copy 
the necessary installation package to do so manually. I never installed it, 
figured I'd wait till next year to see if a final SP comes out.



Looking at these notes you'd think the only thing they spend any time working 
on is FBX but all you have to do is open Maya 2016 to know that¹s not the case. 
It would be nice though to have more information on what if anything makes 
these Softimage versions any different, assuming they might be.



Joey









On 12/9/15 5:15 PM, 
"softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>
 on behalf of Leendert A. Hartog" 
<softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>
 on behalf of hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
Thanks. The installed version is the R2-SP2 that is bundled with the license 
for Maya 2016. It was my impression that SP2 and R2-SP weren't identical, 
otherwise there wouldn't be a reason to distribute two different versions. But 
I could be mistaken... Greetz Leendert AKA Hirazi Blue Softimage hobbyist, 
admin at si-community.com & xsiforum.de -Oorspron

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[hk-vndr]

 

Have you tried Autodesk's licensing parser to validate your file: 

http://www.licenseparser.com/ 

Cheers, 

Henry 

On 2015-12-10 10:17, Leendert A. Hartog wrote: 

> Could there be something wrong with my license file?
> Is there someone who could check this, where I could send my current license 
> file to?
> Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it,
> Only problem I've faced so far are the missing "2016" batch licenses...
> 
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com & xsiforum.de
> 
> -Oorspronkelijk bericht- From: Maurice Patel
> Sent: Thursday, December 10, 2015 4:44 PM
> To: softimage@listproc.autodesk.com
> Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> I can help clarify. There is no difference. There was no Softimage 2016 so 
> for the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' 
> had to be created for Softimage 2015 to go into the new offering. This was 
> the R2 version and apart from licensing requirements there was no change in 
> the software. The only software updates have been the service packs which 
> were issued separately. Our QA team reported today that they have not yet 
> identified an issue in their tests (Batch is working) but that they are 
> continuing to look into this.
> 
> Maurice Patel
> Tél: 514 954-7134
> Cell: 514 242-6549
> 
> -Original Message-
> From: softimage-boun...@listproc.autodesk.com 
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Ponthieux, 
> Joseph G. (LARC-E1A)[LITES II]
> Sent: Thursday, December 10, 2015 9:53 AM
> To: softimage@listproc.autodesk.com
> Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> I just installed 2016 ECSU and recalled seeing this in the release notes:
> 
> https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s 
> [1]
> uites_2016_readme_enu.htm
> 
> The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
> Softimage would be renamed 2016 in order to keep it included in the suites 
> and keep it's identity as a suite component for reference. Thing is it says 
> that that version with the 2016 suite is not "Softimage 2016 R2" but 
> "Softimage 2015 R2" and that 2015 R2 only works with 2016 license keys.
> The installer doesn't install it automatically as in the past, but it does 
> copy the necessary installation package to do so manually. I never installed 
> it, figured I'd wait till next year to see if a final SP comes out.
> 
> Looking at these notes you'd think the only thing they spend any time working 
> on is FBX but all you have to do is open Maya 2016 to know that¹s not the 
> case. It would be nice though to have more information on what if anything 
> makes these Softimage versions any different, assuming they might be.
> 
> Joey
> 
> On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of 
> Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of 
> hirazib...@live.nl> wrote:
> Thanks. The installed version is the R2-SP2 that is bundled with the license 
> for Maya 2016. It was my impression that SP2 and R2-SP weren't identical, 
> otherwise there wouldn't be a reason to distribute two different versions. 
> But I could be mistaken... Greetz Leendert AKA Hirazi Blue Softimage 
> hobbyist, admin at si-community.com & xsiforum.de -Oorspronkelijk 
> bericht- From: Ponthieux, Joseph G. (LARC-E1A)[LITES II] Sent: Wednesday, 
> December 9, 2015 10:58 PM To: softimage@listproc.autodesk.com Subject: RE: 
> Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F") Leendert, Is your 
> install base strictly Softimage or is it a suite? I presume whatever it is it 
> must be installed from a 2016 package? There was a warning somewhere that 
> said the two versions should not be installed at the same time. Is it 
> possible you have both installed somehow? When I run xsibatch here using the 
> 2015 version, it tells me it is checking out: 
> ===
Autodesk Softimage 13.0.114.0 
=== License information: 
using [86269SFTIMSIB_2015_0F] I don't have SI 2016 R2 installed. If your 
version is looking to something with 2016 license code in it, it must be the SI 
2016 R2 version that you are trying to run? The reason I ask is that since the 
SI 2015 SP2 package is supposed to be identical (?) to the SI 2016 R2 package, 
it might be possible to uninstall the 2016 version and install the 2015 one 
that way the 2015 software might only look for licenses with &

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Maurice Patel]

I can help clarify. There is no difference. There was no Softimage 2016 so for 
the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' had to 
be created for Softimage 2015 to go into the new offering. This was the R2 
version and apart from licensing requirements there was no change in the 
software. The only software updates have been the service packs which were 
issued separately. Our QA team reported today that they have not yet identified 
an issue in their tests (Batch is working) but that they are continuing to look 
into this.

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Ponthieux, Joseph 
G. (LARC-E1A)[LITES II]
Sent: Thursday, December 10, 2015 9:53 AM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I just installed 2016 ECSU and recalled seeing this in the release notes:


https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s
uites_2016_readme_enu.htm

The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites and 
keep it's identity as a suite component for reference. Thing is it says that 
that version with the 2016 suite is not "Softimage 2016 R2" but "Softimage 2015 
R2" and that 2015 R2 only works with 2016 license keys.
The installer doesn't install it automatically as in the past, but it does copy 
the necessary installation package to do so manually. I never installed it, 
figured I'd wait till next year to see if a final SP comes out. 

Looking at these notes you'd think the only thing they spend any time working 
on is FBX but all you have to do is open Maya 2016 to know that¹s not the case. 
It would be nice though to have more information on what if anything makes 
these Softimage versions any different, assuming they might be.

Joey




On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of 
Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of 
hirazib...@live.nl> wrote:

>Thanks. The installed version is the R2-SP2 that is bundled with the 
>license for Maya 2016.
>It was my impression that SP2 and R2-SP weren't identical, otherwise 
>there wouldn't be a reason to distribute two different versions.
>But I could be mistaken...
>
>Greetz
>Leendert
>AKA Hirazi Blue
>Softimage hobbyist, admin at si-community.com & xsiforum.de
>
>-Oorspronkelijk bericht-
>From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]
>Sent: Wednesday, December 9, 2015 10:58 PM
>To: softimage@listproc.autodesk.com
>Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>
>Leendert,
>
>Is your install base strictly Softimage or is it a suite? I presume 
>whatever it is it must be installed from a 2016 package?
>
>There was a warning somewhere that said the two versions should not be 
>installed at the same time. Is it possible you have both installed 
>somehow?
>
>When I run xsibatch here using the 2015 version, it tells me it is 
>checking
>out:
>
>===
> Autodesk Softimage 13.0.114.0
>===
>
>License information: using [86269SFTIMSIB_2015_0F]
>
>I don't have SI 2016 R2 installed.
>
>If your version is looking to something with 2016 license code in it, 
>it must be the SI 2016 R2 version that you are trying to run?
>
>The reason I ask is that since the SI 2015 SP2 package is supposed to 
>be identical (?) to the SI 2016 R2 package, it might be possible to 
>uninstall the 2016 version and install the 2015 one that way the 2015 
>software might only look for licenses with "2015" in it. Maybe that 
>will let you get production going till the problem is sorted out?
>
>
>--
>Joey Ponthieux
>LaRC Information Technology Enhanced Services (LITES II) Science 
>Systems and Applications Inc. (SSAI) NASA Langley Research Center 
>__
>Opinions stated here-in are strictly those of the author and do not 
>represent the opinions of NASA or any other party.
>
>> -Original Message-----
>> From: softimage-boun...@listproc.autodesk.com [mailto:softimage- 
>> boun...@listproc.autodesk.com] On Behalf Of Maurice Patel
>> Sent: Wednesday, December 09, 2015 4:35 PM
>> To: softimage@listproc.autodesk.com
>> Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>>
>> No problem, If others are having similar problems and can provide 
>>more  data  it may help find a

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Ponthieux, Joseph G. (LARC-E1A)[LITES II]]

I just installed 2016 ECSU and recalled seeing this in the release notes:


https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s
uites_2016_readme_enu.htm

The Softimage Notes suggest that SI 15 and 16 are identical. I suspected
Softimage would be renamed 2016 in order to keep it included in the suites
and keep it's identity as a suite component for reference. Thing is it
says that that version with the 2016 suite is not "Softimage 2016 R2" but
"Softimage 2015 R2" and that 2015 R2 only works with 2016 license keys.
The installer doesn't install it automatically as in the past, but it does
copy the necessary installation package to do so manually. I never
installed it, figured I'd wait till next year to see if a final SP comes
out. 

Looking at these notes you'd think the only thing they spend any time
working on is FBX but all you have to do is open Maya 2016 to know that¹s
not the case. It would be nice though to have more information on what if
anything makes these Softimage versions any different, assuming they might
be.

Joey




On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of
Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of
hirazib...@live.nl> wrote:

>Thanks. The installed version is the R2-SP2 that is bundled with the
>license 
>for Maya 2016.
>It was my impression that SP2 and R2-SP weren't identical,
>otherwise there wouldn't be a reason to distribute two different versions.
>But I could be mistaken...
>
>Greetz
>Leendert
>AKA Hirazi Blue
>Softimage hobbyist, admin at si-community.com & xsiforum.de
>
>-Oorspronkelijk bericht-
>From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]
>Sent: Wednesday, December 9, 2015 10:58 PM
>To: softimage@listproc.autodesk.com
>Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>
>Leendert,
>
>Is your install base strictly Softimage or is it a suite? I presume
>whatever 
>it is it must be installed from a 2016 package?
>
>There was a warning somewhere that said the two versions should not be
>installed at the same time. Is it possible you have both installed
>somehow?
>
>When I run xsibatch here using the 2015 version, it tells me it is
>checking 
>out:
>
>===
> Autodesk Softimage 13.0.114.0
>===
>
>License information: using [86269SFTIMSIB_2015_0F]
>
>I don't have SI 2016 R2 installed.
>
>If your version is looking to something with 2016 license code in it, it
>must be the SI 2016 R2 version that you are trying to run?
>
>The reason I ask is that since the SI 2015 SP2 package is supposed to be
>identical (?) to the SI 2016 R2 package, it might be possible to
>uninstall 
>the 2016 version and install the 2015 one that way the 2015 software
>might 
>only look for licenses with "2015" in it. Maybe that will let you get
>production going till the problem is sorted out?
>
>
>--
>Joey Ponthieux
>LaRC Information Technology Enhanced Services (LITES II)
>Science Systems and Applications Inc. (SSAI)
>NASA Langley Research Center
>__
>Opinions stated here-in are strictly those of the author and do not
>represent the opinions of NASA or any other party.
>
>> -Original Message-----
>> From: softimage-boun...@listproc.autodesk.com [mailto:softimage-
>> boun...@listproc.autodesk.com] On Behalf Of Maurice Patel
>> Sent: Wednesday, December 09, 2015 4:35 PM
>> To: softimage@listproc.autodesk.com
>> Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>>
>> No problem, If others are having similar problems and can provide more
>> data
>> it may help find a solution faster. Hopefully we can get to the bottom
>>of 
>> this
>> quickly.
>> Maurice
>>
>> Maurice Patel
>> Tél:  514 954-7134
>> Cell: 514 242-6549
>>
>> -Original Message-
>> From: softimage-boun...@listproc.autodesk.com [mailto:softimage-
>> boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
>> Sent: Wednesday, December 09, 2015 3:56 PM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>>
>> Sorry, I understood your mail. The point I was trying to make was that
>> others
>> should probably speak up, if they experience the same problem.
>> I understand there is nothing much you can do for me if it is a problem
>> that
>> only affects me.
>> But if there is some bug lurking in the background, mor

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Leendert A. Hartog]

Could there be something wrong with my license file?
Is there someone who could check this, where I could send my current license 
file to?

Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it,
Only problem I've faced so far are the missing "2016" batch licenses...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht- 
From: Maurice Patel

Sent: Thursday, December 10, 2015 4:44 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I can help clarify. There is no difference. There was no Softimage 2016 so 
for the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' 
had to be created for Softimage 2015 to go into the new offering. This was 
the R2 version and apart from licensing requirements there was no change in 
the software. The only software updates have been the service packs which 
were issued separately. Our QA team reported today that they have not yet 
identified an issue in their tests (Batch is working) but that they are 
continuing to look into this.


Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Ponthieux, 
Joseph G. (LARC-E1A)[LITES II]

Sent: Thursday, December 10, 2015 9:53 AM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I just installed 2016 ECSU and recalled seeing this in the release notes:


https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s
uites_2016_readme_enu.htm

The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites 
and keep it's identity as a suite component for reference. Thing is it says 
that that version with the 2016 suite is not "Softimage 2016 R2" but 
"Softimage 2015 R2" and that 2015 R2 only works with 2016 license keys.
The installer doesn't install it automatically as in the past, but it does 
copy the necessary installation package to do so manually. I never installed 
it, figured I'd wait till next year to see if a final SP comes out.


Looking at these notes you'd think the only thing they spend any time 
working on is FBX but all you have to do is open Maya 2016 to know that¹s 
not the case. It would be nice though to have more information on what if 
anything makes these Softimage versions any different, assuming they might 
be.


Joey




On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of 
Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of 
hirazib...@live.nl> wrote:



Thanks. The installed version is the R2-SP2 that is bundled with the
license for Maya 2016.
It was my impression that SP2 and R2-SP weren't identical, otherwise
there wouldn't be a reason to distribute two different versions.
But I could be mistaken...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht-
From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]
Sent: Wednesday, December 9, 2015 10:58 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Leendert,

Is your install base strictly Softimage or is it a suite? I presume
whatever it is it must be installed from a 2016 package?

There was a warning somewhere that said the two versions should not be
installed at the same time. Is it possible you have both installed
somehow?

When I run xsibatch here using the 2015 version, it tells me it is
checking
out:

   ===
Autodesk Softimage 13.0.114.0
   ===

   License information: using [86269SFTIMSIB_2015_0F]

I don't have SI 2016 R2 installed.

If your version is looking to something with 2016 license code in it,
it must be the SI 2016 R2 version that you are trying to run?

The reason I ask is that since the SI 2015 SP2 package is supposed to
be identical (?) to the SI 2016 R2 package, it might be possible to
uninstall the 2016 version and install the 2015 one that way the 2015
software might only look for licenses with "2015" in it. Maybe that
will let you get production going till the problem is sorted out?


--
Joey Ponthieux
LaRC Information Technology Enhanced Services (LITES II) Science
Systems and Applications Inc. (SSAI) NASA Langley Research Center
__
Opinions stated here-in are strictly those of the author and do not
represent the opinions of NASA or any other party.


-Original Message-
From: softimage-boun...@listproc.autodesk.com [mailto:softimage-
boun...@listproc.

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Maurice Patel]

My normal answer to this kind of question would typically be contact support. I 
am not sure otherwise as you would need to talk to the licensing team. You 
could try the chat here. 
https://knowledge.autodesk.com/contactus/activation-registration/registering-product
maurice

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
Sent: Thursday, December 10, 2015 11:17 AM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Could there be something wrong with my license file?
Is there someone who could check this, where I could send my current license 
file to?
Normal "interfaced" Softimage 2015 and Maya 2016 run properly off it, Only 
problem I've faced so far are the missing "2016" batch licenses...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht-
From: Maurice Patel
Sent: Thursday, December 10, 2015 4:44 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I can help clarify. There is no difference. There was no Softimage 2016 so for 
the 2016 release of the Suites and the Maya/3ds Max bundles a 'bridge' 
had to be created for Softimage 2015 to go into the new offering. This was the 
R2 version and apart from licensing requirements there was no change in the 
software. The only software updates have been the service packs which were 
issued separately. Our QA team reported today that they have not yet identified 
an issue in their tests (Batch is working) but that they are continuing to look 
into this.

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Ponthieux, Joseph 
G. (LARC-E1A)[LITES II]
Sent: Thursday, December 10, 2015 9:53 AM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I just installed 2016 ECSU and recalled seeing this in the release notes:


https://knowledge.autodesk.com/sites/default/files/entertainment_creation_s
uites_2016_readme_enu.htm

The Softimage Notes suggest that SI 15 and 16 are identical. I suspected 
Softimage would be renamed 2016 in order to keep it included in the suites and 
keep it's identity as a suite component for reference. Thing is it says that 
that version with the 2016 suite is not "Softimage 2016 R2" but "Softimage 2015 
R2" and that 2015 R2 only works with 2016 license keys.
The installer doesn't install it automatically as in the past, but it does copy 
the necessary installation package to do so manually. I never installed it, 
figured I'd wait till next year to see if a final SP comes out.

Looking at these notes you'd think the only thing they spend any time working 
on is FBX but all you have to do is open Maya 2016 to know that¹s not the case. 
It would be nice though to have more information on what if anything makes 
these Softimage versions any different, assuming they might be.

Joey




On 12/9/15 5:15 PM, "softimage-boun...@listproc.autodesk.com on behalf of 
Leendert A. Hartog" <softimage-boun...@listproc.autodesk.com on behalf of 
hirazib...@live.nl> wrote:

>Thanks. The installed version is the R2-SP2 that is bundled with the 
>license for Maya 2016.
>It was my impression that SP2 and R2-SP weren't identical, otherwise 
>there wouldn't be a reason to distribute two different versions.
>But I could be mistaken...
>
>Greetz
>Leendert
>AKA Hirazi Blue
>Softimage hobbyist, admin at si-community.com & xsiforum.de
>
>-Oorspronkelijk bericht-
>From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]
>Sent: Wednesday, December 9, 2015 10:58 PM
>To: softimage@listproc.autodesk.com
>Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
>
>Leendert,
>
>Is your install base strictly Softimage or is it a suite? I presume 
>whatever it is it must be installed from a 2016 package?
>
>There was a warning somewhere that said the two versions should not be 
>installed at the same time. Is it possible you have both installed 
>somehow?
>
>When I run xsibatch here using the 2015 version, it tells me it is 
>checking
>out:
>
>===
> Autodesk Softimage 13.0.114.0
>===
>
>License information: using [86269SFTIMSIB_2015_0F]
>
>I don't have SI 2016 R2 installed.
>
>If your version is looking to something with 2016 license code in it, 
>it must be the SI 2016 R2 version that you 

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Leendert A. Hartog]

I’ve changed the title of the thread to make it more meaningful and perhaps get 
it noticed better...
Would be nice, if someone from Autodesk could look into this issue,
while the software technically is still supported.
I’m not on subscription any more,
so I have no other way to bring this to their attention...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog 
Sent: Tuesday, December 8, 2015 4:29 PM
To: softimage@listproc.autodesk.com 
Subject: Re: ""86269SFTIMSIB_2016_0F"

After having stopped the server, setting the FLEXLM_DIAGNOSTICS to 3 and 
running XSI.bat, all I get is the “there is no interactive network license 
(...)” error and nothing in the command window...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Stephen Blair 
Sent: Tuesday, December 8, 2015 4:18 PM
To: softimage@listproc.autodesk.com 
Subject: Re: ""86269SFTIMSIB_2016_0F"

When Softimage can get a license, you won't see anything from 
FLEXLM_DIAGNOSTICS=3 
The license manager should show what licenses are checked out.


If you really wanted to see what license Softimage interactive tries to check 
out, you'd have to stop the license server and then start Softimage with 
FLEXLM_DIAGNOSTICS set.

Softimage 2015 SP1 will cascade through the licenses like this:

Feature:   86269SFTIM_2015_0F
Feature:   86270SIECS_2015_0F
Feature:   86458SIECS_2016_0F
Feature:   863983DSMXS_2015_0F
Feature:   864733DSMXS_2016_0F
Feature:   86400MAYAS_2015_0F
Feature:   86441MAYAS_2016_0F
Feature:   86243ENCSU_2015_0F
Feature:   86435ENCSU_2016_0F
Feature:   86248ESEC_2015_0F

---
Autodesk® Softimage® 2015
---
Error: there is no interactive network license available to run Autodesk 
Softimage 2015.
Would you like to run in Standalone mode?
---
Yes   No   
---

Feature:   SFTIM_F_S





On Tue, Dec 8, 2015 at 9:38 AM, Leendert A. Hartog <hirazib...@live.nl> wrote:

  The regular Softimage interface runs without errors, even started from the 
command prompt with “FLEXLM_DIAGNOSTICS” set to 3...

  Greetz
  Leendert
  AKA Hirazi Blue
  Softimage hobbyist, admin at si-community.com & xsiforum.de

  From: Ponthieux, Joseph G. (LARC-E1A)[LITES II] 
  Sent: Tuesday, December 8, 2015 3:27 PM
  To: softimage@listproc.autodesk.com 
  Subject: RE: ""86269SFTIMSIB_2016_0F"

  The Softimage 15 R2 interface runs though, correct? Even though your license 
lists the item 86269SFTIMSIB_2015_0F. Its only the batch gives the error?



  --

  Joey Ponthieux

  LaRC Information Technology Enhanced Services (LITES II)

  Science Systems and Applications Inc. (SSAI)

  NASA Langley Research Center

  __

  Opinions stated here-in are strictly those of the author and do not 

  represent the opinions of NASA or any other party.



  From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jens Lindgren
  Sent: Tuesday, December 08, 2015 7:29 AM
  To: softimage@listproc.autodesk.com
  Subject: Re: ""86269SFTIMSIB_2016_0F"



  The Softimage that is boundled with 2016 products is called Softimage 2015 
(SP2) R2. R2 menas it will use 2016 licenses, H instead of G in product key.

  So I'm guessing you just need to get the 2016 license from AD.



  On Tue, Dec 8, 2015 at 1:00 PM, Leendert A. Hartog <hirazib...@live.nl> wrote:

This is 2015 SP2 (the one bundled to MayaS 2016)



From: Leendert A. Hartog 

Sent: Tuesday, December 8, 2015 12:53 PM

To: softimage@listproc.autodesk.com 

Subject: ""86269SFTIMSIB_2016_0F"



Hi list,

while trying to check out a batch license, I get the following errors 
(after setting “ FLEXLM_DIAGNOSTICS to 3”) as attached to this mail.

Weird thing is FlexLM seems to want to check out “86269SFTIMSIB_2016_0F” , 
which (due to the EOL) doesn’t exist...



Greetz

Leendert

AKA Hirazi Blue

Softimage hobbyist, admin at si-community.com & xsiforum.de








  -- 

  Jens Lindgren

  

  VFX Supervisor & Lead TD

  Magoo 3D Studios

Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Leendert A. Hartog]

After having contacted Maurice Patel directly, I was informed this was the 
first time the devs heard of this issue.
My question to you all now is, does anyone else experience this problem as well?
I am not “on support” anymore, so my sole report doesn’t carry that much 
weight...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog 
Sent: Wednesday, December 9, 2015 10:35 AM
To: softimage@listproc.autodesk.com 
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I’ve changed the title of the thread to make it more meaningful and perhaps get 
it noticed better...
Would be nice, if someone from Autodesk could look into this issue,
while the software technically is still supported.
I’m not on subscription any more,
so I have no other way to bring this to their attention...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog 
Sent: Tuesday, December 8, 2015 4:29 PM
To: softimage@listproc.autodesk.com 
Subject: Re: ""86269SFTIMSIB_2016_0F"

After having stopped the server, setting the FLEXLM_DIAGNOSTICS to 3 and 
running XSI.bat, all I get is the “there is no interactive network license 
(...)” error and nothing in the command window...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Stephen Blair 
Sent: Tuesday, December 8, 2015 4:18 PM
To: softimage@listproc.autodesk.com 
Subject: Re: ""86269SFTIMSIB_2016_0F"

When Softimage can get a license, you won't see anything from 
FLEXLM_DIAGNOSTICS=3 
The license manager should show what licenses are checked out.


If you really wanted to see what license Softimage interactive tries to check 
out, you'd have to stop the license server and then start Softimage with 
FLEXLM_DIAGNOSTICS set.

Softimage 2015 SP1 will cascade through the licenses like this:

Feature:   86269SFTIM_2015_0F
Feature:   86270SIECS_2015_0F
Feature:   86458SIECS_2016_0F
Feature:   863983DSMXS_2015_0F
Feature:   864733DSMXS_2016_0F
Feature:   86400MAYAS_2015_0F
Feature:   86441MAYAS_2016_0F
Feature:   86243ENCSU_2015_0F
Feature:   86435ENCSU_2016_0F
Feature:   86248ESEC_2015_0F

---
Autodesk® Softimage® 2015
---
Error: there is no interactive network license available to run Autodesk 
Softimage 2015.
Would you like to run in Standalone mode?
---
Yes   No   
---

Feature:   SFTIM_F_S





On Tue, Dec 8, 2015 at 9:38 AM, Leendert A. Hartog <hirazib...@live.nl> wrote:

  The regular Softimage interface runs without errors, even started from the 
command prompt with “FLEXLM_DIAGNOSTICS” set to 3...

  Greetz
  Leendert
  AKA Hirazi Blue
  Softimage hobbyist, admin at si-community.com & xsiforum.de

  From: Ponthieux, Joseph G. (LARC-E1A)[LITES II] 
  Sent: Tuesday, December 8, 2015 3:27 PM
  To: softimage@listproc.autodesk.com 
  Subject: RE: ""86269SFTIMSIB_2016_0F"

  The Softimage 15 R2 interface runs though, correct? Even though your license 
lists the item 86269SFTIMSIB_2015_0F. Its only the batch gives the error?



  --

  Joey Ponthieux

  LaRC Information Technology Enhanced Services (LITES II)

  Science Systems and Applications Inc. (SSAI)

  NASA Langley Research Center

  __

  Opinions stated here-in are strictly those of the author and do not 

  represent the opinions of NASA or any other party.



  From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Jens Lindgren
  Sent: Tuesday, December 08, 2015 7:29 AM
  To: softimage@listproc.autodesk.com
  Subject: Re: ""86269SFTIMSIB_2016_0F"



  The Softimage that is boundled with 2016 products is called Softimage 2015 
(SP2) R2. R2 menas it will use 2016 licenses, H instead of G in product key.

  So I'm guessing you just need to get the 2016 license from AD.



  On Tue, Dec 8, 2015 at 1:00 PM, Leendert A. Hartog <hirazib...@live.nl> wrote:

This is 2015 SP2 (the one bundled to MayaS 2016)



From: Leendert A. Hartog 

Sent: Tuesday, December 8, 2015 12:53 PM

To: softimage@listproc.autodesk.com 

Subject: ""86269SFTIMSIB_2016_0F"



Hi list,

while trying to check out a batch license, I get the following errors 
(after setting “ FLEXLM_DIAGNOSTICS to 3”) as attached to this mail.

Weird thing is FlexLM seems to want to check out “86269SFTIMSIB_2016_0F” , 
which (due to the EOL) doesn’t exist...



Greetz

Leendert

AKA Hirazi Blue

Softimage hobbyist, admin at si-community.com & xsiforum.de








  -- 

  Jens Lindgren

  

  VFX Supervisor & Lead TD

  Magoo 3D Studios

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Maurice Patel]

No problem, If others are having similar problems and can provide more data it 
may help find a solution faster. Hopefully we can get to the bottom of this 
quickly. 
Maurice

Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

-Original Message-
From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
Sent: Wednesday, December 09, 2015 3:56 PM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Sorry, I understood your mail. The point I was trying to make was that others 
should probably speak up, if they experience the same problem.
I understand there is nothing much you can do for me if it is a problem that 
only affects me.
But if there is some bug lurking in the background, more reports would 
undoubtably help.
Sorry for the confusion, I didn't intentionally wanted to misrepresent your 
mail to me...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

-Oorspronkelijk bericht-
From: Maurice Patel
Sent: Wednesday, December 9, 2015 9:32 PM
To: softimage@listproc.autodesk.com
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

Hi Leendert,

I think you misunderstood my response. My intention was not to imply that your 
report carried no weight otherwise why would we have already escalated your 
issue with the dev team, even before you contacted us?

My point was as you were not going through the normal support channels we could 
not help you if the problem is with your setup. As I mentioned in my email, we 
will keep you posted if our engineers find an issue/solution on our end.

Maurice


Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

From: softimage-boun...@listproc.autodesk.com
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. 
Hartog
Sent: Wednesday, December 09, 2015 3:17 PM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

After having contacted Maurice Patel directly, I was informed this was the 
first time the devs heard of this issue.
My question to you all now is, does anyone else experience this problem as well?
I am not “on support” anymore, so my sole report doesn’t carry that much 
weight...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog<mailto:hirazib...@live.nl>
Sent: Wednesday, December 9, 2015 10:35 AM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I’ve changed the title of the thread to make it more meaningful and perhaps get 
it noticed better...
Would be nice, if someone from Autodesk could look into this issue, while the 
software technically is still supported.
I’m not on subscription any more,
so I have no other way to bring this to their attention...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog<mailto:hirazib...@live.nl>
Sent: Tuesday, December 8, 2015 4:29 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: ""86269SFTIMSIB_2016_0F"

After having stopped the server, setting the FLEXLM_DIAGNOSTICS to 3 and 
running XSI.bat, all I get is the “there is no interactive network license 
(...)” error and nothing in the command window...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Stephen Blair<mailto:stephenrbl...@gmail.com>
Sent: Tuesday, December 8, 2015 4:18 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: ""86269SFTIMSIB_2016_0F"

When Softimage can get a license, you won't see anything from
FLEXLM_DIAGNOSTICS=3
The license manager should show what licenses are checked out.

If you really wanted to see what license Softimage interactive tries to check 
out, you'd have to stop the license server and then start Softimage with 
FLEXLM_DIAGNOSTICS set.

Softimage 2015 SP1 will cascade through the licenses like this:

Feature:   86269SFTIM_2015_0F
Feature:   86270SIECS_2015_0F
Feature:   86458SIECS_2016_0F
Feature:   863983DSMXS_2015_0F
Feature:   864733DSMXS_2016_0F
Feature:   86400MAYAS_2015_0F
Feature:   86441MAYAS_2016_0F
Feature:   86243ENCSU_2015_0F
Feature:   86435ENCSU_2016_0F
Feature:   86248ESEC_2015_0F

---
Autodesk® Softimage® 2015
---
Error: there is no interactive network license available to run Autodesk 
Softimage 2015.
Would you like to run in Standalone mode?
---
Yes   No
---

Feature:   SFTIM_F_S





On Tue, Dec 8, 2015 at 9:38 AM, Lee

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Ponthieux, Joseph G. (LARC-E1A)[LITES II]]

Leendert,

Is your install base strictly Softimage or is it a suite? I presume whatever it 
is it must be installed from a 2016 package?

There was a warning somewhere that said the two versions should not be 
installed at the same time. Is it possible you have both installed somehow?

When I run xsibatch here using the 2015 version, it tells me it is checking 
out: 

===
 Autodesk Softimage 13.0.114.0
===

License information: using [86269SFTIMSIB_2015_0F]

I don't have SI 2016 R2 installed.

If your version is looking to something with 2016 license code in it, it must 
be the SI 2016 R2 version that you are trying to run? 

The reason I ask is that since the SI 2015 SP2 package is supposed to be 
identical (?) to the SI 2016 R2 package, it might be possible to uninstall the 
2016 version and install the 2015 one that way the 2015 software might only 
look for licenses with "2015" in it. Maybe that will let you get production 
going till the problem is sorted out?


--
Joey Ponthieux
LaRC Information Technology Enhanced Services (LITES II)
Science Systems and Applications Inc. (SSAI)
NASA Langley Research Center
__
Opinions stated here-in are strictly those of the author and do not 
represent the opinions of NASA or any other party.

> -Original Message-
> From: softimage-boun...@listproc.autodesk.com [mailto:softimage-
> boun...@listproc.autodesk.com] On Behalf Of Maurice Patel
> Sent: Wednesday, December 09, 2015 4:35 PM
> To: softimage@listproc.autodesk.com
> Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> No problem, If others are having similar problems and can provide more data
> it may help find a solution faster. Hopefully we can get to the bottom of this
> quickly.
> Maurice
> 
> Maurice Patel
> Tél:  514 954-7134
> Cell: 514 242-6549
> 
> -Original Message-
> From: softimage-boun...@listproc.autodesk.com [mailto:softimage-
> boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
> Sent: Wednesday, December 09, 2015 3:56 PM
> To: softimage@listproc.autodesk.com
> Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> Sorry, I understood your mail. The point I was trying to make was that others
> should probably speak up, if they experience the same problem.
> I understand there is nothing much you can do for me if it is a problem that
> only affects me.
> But if there is some bug lurking in the background, more reports would
> undoubtably help.
> Sorry for the confusion, I didn't intentionally wanted to misrepresent your
> mail to me...
> 
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com & xsiforum.de
> 
> -Oorspronkelijk bericht-
> From: Maurice Patel
> Sent: Wednesday, December 9, 2015 9:32 PM
> To: softimage@listproc.autodesk.com
> Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> Hi Leendert,
> 
> I think you misunderstood my response. My intention was not to imply that
> your report carried no weight otherwise why would we have already
> escalated your issue with the dev team, even before you contacted us?
> 
> My point was as you were not going through the normal support channels
> we could not help you if the problem is with your setup. As I mentioned in
> my email, we will keep you posted if our engineers find an issue/solution on
> our end.
> 
> Maurice
> 
> 
> Maurice Patel
> Tél:  514 954-7134
> Cell: 514 242-6549
> 
> From: softimage-boun...@listproc.autodesk.com
> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert
> A.
> Hartog
> Sent: Wednesday, December 09, 2015 3:17 PM
> To: softimage@listproc.autodesk.com
> Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> After having contacted Maurice Patel directly, I was informed this was the
> first time the devs heard of this issue.
> My question to you all now is, does anyone else experience this problem as
> well?
> I am not “on support” anymore, so my sole report doesn’t carry that much
> weight...
> 
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com & xsiforum.de
> 
> From: Leendert A. Hartog<mailto:hirazib...@live.nl>
> Sent: Wednesday, December 9, 2015 10:35 AM
> To:
> softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com
> >
> Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
> 
> I’ve changed the title of the thread to make it more meaningful and perhaps
> ge

RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

[Maurice Patel]

Hi Leendert,

I think you misunderstood my response. My intention was not to imply that your 
report carried no weight otherwise why would we have already escalated your 
issue with the dev team, even before you contacted us?

My point was as you were not going through the normal support channels we could 
not help you if the problem is with your setup. As I mentioned in my email, we 
will keep you posted if our engineers find an issue/solution on our end.

Maurice


Maurice Patel
Tél:  514 954-7134
Cell: 514 242-6549

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Leendert A. Hartog
Sent: Wednesday, December 09, 2015 3:17 PM
To: softimage@listproc.autodesk.com
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

After having contacted Maurice Patel directly, I was informed this was the 
first time the devs heard of this issue.
My question to you all now is, does anyone else experience this problem as well?
I am not “on support” anymore, so my sole report doesn’t carry that much 
weight...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog<mailto:hirazib...@live.nl>
Sent: Wednesday, December 9, 2015 10:35 AM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")

I’ve changed the title of the thread to make it more meaningful and perhaps get 
it noticed better...
Would be nice, if someone from Autodesk could look into this issue,
while the software technically is still supported.
I’m not on subscription any more,
so I have no other way to bring this to their attention...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Leendert A. Hartog<mailto:hirazib...@live.nl>
Sent: Tuesday, December 8, 2015 4:29 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: ""86269SFTIMSIB_2016_0F"

After having stopped the server, setting the FLEXLM_DIAGNOSTICS to 3 and 
running XSI.bat, all I get is the “there is no interactive network license 
(...)” error and nothing in the command window...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

From: Stephen Blair<mailto:stephenrbl...@gmail.com>
Sent: Tuesday, December 8, 2015 4:18 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: ""86269SFTIMSIB_2016_0F"

When Softimage can get a license, you won't see anything from 
FLEXLM_DIAGNOSTICS=3
The license manager should show what licenses are checked out.

If you really wanted to see what license Softimage interactive tries to check 
out, you'd have to stop the license server and then start Softimage with 
FLEXLM_DIAGNOSTICS set.

Softimage 2015 SP1 will cascade through the licenses like this:

Feature:   86269SFTIM_2015_0F
Feature:   86270SIECS_2015_0F
Feature:   86458SIECS_2016_0F
Feature:   863983DSMXS_2015_0F
Feature:   864733DSMXS_2016_0F
Feature:   86400MAYAS_2015_0F
Feature:   86441MAYAS_2016_0F
Feature:   86243ENCSU_2015_0F
Feature:   86435ENCSU_2016_0F
Feature:   86248ESEC_2015_0F

---
Autodesk® Softimage® 2015
---
Error: there is no interactive network license available to run Autodesk 
Softimage 2015.
Would you like to run in Standalone mode?
---
Yes   No
---

Feature:   SFTIM_F_S





On Tue, Dec 8, 2015 at 9:38 AM, Leendert A. Hartog 
<hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
The regular Softimage interface runs without errors, even started from the 
command prompt with “FLEXLM_DIAGNOSTICS” set to 3...

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> & 
xsiforum.de<http://xsiforum.de>

From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]<mailto:j.ponthi...@nasa.gov>
Sent: Tuesday, December 8, 2015 3:27 PM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: RE: ""86269SFTIMSIB_2016_0F"

The Softimage 15 R2 interface runs though, correct? Even though your license 
lists the item 86269SFTIMSIB_2015_0F. Its only the batch gives the error?

--
Joey Ponthieux
LaRC Information Technology Enhanced Services (LITES II)
Science Systems and Applications Inc. (SSAI)
NASA Langley Research Center
__
Opinions stated here-in are strictly those of the author and do not
represent the opinions of NASA or any other party.

From: 
softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>
 
[mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-bou

Re: SP2???

[Jens Lindgren]

I would love to see some 3rd-party rendering issues fixed. Softimage does
some bad stuff to UVs and Vertex Colors, etc. when exporting subdivided
meshes. For the people at Autodesk, I'm talking about SOFT-9244 and SOFT-
9630.

I also found another bug reported in Arnold that I don't know if it's fixed
already or not: SOFT-6372 Ability to query UVs at a particular time.

/Jens


On Mon, Sep 28, 2015 at 9:16 AM, phil harbath 
wrote:

> I got the following from Eric concerning the emRoads tool crashing in 2015
>
>
> Hi Phil,
>
> the exact cause of the crash is the following:
>
> These two functions crash in Softimage 2015 and Softimage 2015 SP1:
> X3DObject::.GetProperties().Find()
> X3DObject::GetPropertyFromName()
>
> The above functions are needed by the roads tool to find and read the road
> parameters.
>
> Best,
> Eric
>



-- 
Jens Lindgren

VFX Supervisor & Lead TD
Magoo 3D Studios 

Re: SP2???

[phil harbath]

I got the following from Eric concerning the emRoads tool crashing in 2015


Hi Phil,

the exact cause of the crash is the following:

These two functions crash in Softimage 2015 and Softimage 2015 SP1:
X3DObject::.GetProperties().Find()
X3DObject::GetPropertyFromName()

The above functions are needed by the roads tool to find and read the road 
parameters.


Best,
Eric 

Re: SP2???

[Christian Keller]

I think The Version i'm on, it already is fixed !

--
Christian Keller 
Visual effects|direction
m  +49 179 69 36 248

chris3...@me.com
Vimeo.com/channels/96149

> Am 25.09.2015 um 16:32 schrieb Martin Chatterjee 
> <martin.chatterjee.li...@googlemail.com>:
> 
> Hi Hsiao Ming,
> 
> that's great news.
> 
> Could you please confirm that the "Reinterpret Location" compound bug has 
> been fixed for the upcoming SP2?
> 
> As far as I'm concerned this is probably the most critical 2015 bug out there 
> and we are keen on getting that one solved.
> 
> Thanks in advance,
> 
> Martin
> 
> 
> --
>Martin Chatterjee
>  
> [ Freelance Technical Director ]
> [   http://www.chatterjee.de   ]
> [ https://vimeo.com/chatterjee ] 
> 
>> On Thu, Sep 17, 2015 at 8:19 AM, Hsiao Ming Chia 
>> <hsiao.ming.c...@autodesk.com> wrote:
>> Yes, there is another one coming soon.
>> 
>> Thanks,
>> Hsiao Ming
>> 
>> From: softimage-boun...@listproc.autodesk.com 
>> [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
>> Sent: Thursday, September 17, 2015 2:19 AM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: SP2???
>> 
>> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to 
>> fix. :)
>> 
>> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
>> <hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
>> I might have missed the announcement, if so, sorry, but can we still expect 
>> a Softimage 2015 Service Pack 2 and if so, when will it be released?
>> 
>> Greetz
>> Leendert
>> AKA Hirazi Blue
>> Softimage hobbyist, admin at si-community.com<http://si-community.com> & 
>> xsiforum.de<http://xsiforum.de>
> 

Re: SP2???

[Hsiao Ming Chia]

Hi Martin,

Yes, it’s one of the defects in the fixed list.

Thanks,
Hsiao Ming

From: martin.chatter...@gmail.com [mailto:martin.chatter...@gmail.com] On 
Behalf Of Martin Chatterjee
Sent: Friday, September 25, 2015 10:32 PM
To: softimage@listproc.autodesk.com; Hsiao Ming Chia
Subject: SPAM: Re: SP2???

Hi Hsiao Ming,

that's great news.

Could you please confirm that the "Reinterpret Location" compound bug has been 
fixed for the upcoming SP2?

As far as I'm concerned this is probably the most critical 2015 bug out there 
and we are keen on getting that one solved.

Thanks in advance,

Martin


--
   Martin Chatterjee

[ Freelance Technical Director ]
[   http://www.chatterjee.de<http://www.chatterjee.de/>   ]
[ https://vimeo.com/chatterjee ]

On Thu, Sep 17, 2015 at 8:19 AM, Hsiao Ming Chia 
<hsiao.ming.c...@autodesk.com<mailto:hsiao.ming.c...@autodesk.com>> wrote:
Yes, there is another one coming soon.

Thanks,
Hsiao Ming

From: 
softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>
 
[mailto:softimage-boun...@listproc.autodesk.com<mailto:softimage-boun...@listproc.autodesk.com>]
 On Behalf Of Tenshi .
Sent: Thursday, September 17, 2015 2:19 AM
To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>
Subject: Re: SP2???

I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to fix. :)

On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
<hirazib...@live.nl<mailto:hirazib...@live.nl><mailto:hirazib...@live.nl<mailto:hirazib...@live.nl>>>
 wrote:
I might have missed the announcement, if so, sorry, but can we still expect a 
Softimage 2015 Service Pack 2 and if so, when will it be released?

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at 
si-community.com<http://si-community.com><http://si-community.com> & 
xsiforum.de<http://xsiforum.de><http://xsiforum.de>

<>

Re: SP2???

[Leonard Koch]

One interesting bug that we recently hit is that Softimage crashes when you
load a 32 bit image (exr or hdr) into a texture map and then try to use it
in ICE.
This issue only occurs on CentOS 6.2.

Let me know if you want a simple repro scene.

Cheers
Leonard
On Sep 25, 2015 4:33 PM, "Martin Chatterjee" <
martin.chatterjee.li...@googlemail.com> wrote:

> Hi Hsiao Ming,
>
> that's great news.
>
> Could you please confirm that the *"Reinterpret Location"* compound bug
> has been fixed for the upcoming SP2?
>
> As far as I'm concerned this is probably the most critical 2015 bug out
> there and we are keen on getting that one solved.
>
> Thanks in advance,
>
> Martin
>
>
> --
>Martin Chatterjee
>
> [ Freelance Technical Director ]
> [   http://www.chatterjee.de   ]
> [ https://vimeo.com/chatterjee ]
>
> On Thu, Sep 17, 2015 at 8:19 AM, Hsiao Ming Chia <
> hsiao.ming.c...@autodesk.com> wrote:
>
>> Yes, there is another one coming soon.
>>
>> Thanks,
>> Hsiao Ming
>>
>> From: softimage-boun...@listproc.autodesk.com [mailto:
>> softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
>> Sent: Thursday, September 17, 2015 2:19 AM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: SP2???
>>
>> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
>> fix. :)
>>
>> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
>> <mailto:hirazib...@live.nl>> wrote:
>> I might have missed the announcement, if so, sorry, but can we still
>> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>>
>> Greetz
>> Leendert
>> AKA Hirazi Blue
>> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
>> xsiforum.de<http://xsiforum.de>
>>
>>
>

Re: SP2???

[peter_b]

of course I do - it wasn't serious.
and it's not just a matter of shear amount of resources needed - there's the 
interdependence of bugs and code - fix one thing, you might break another - 
perhaps some issues/solutions are mutually exclusive.


still - for a final release (this one will be the last ever, will it not?) 
it would be nice to go out with a tiny bang


-Original Message- 
From: Matt Lind

Sent: Friday, September 25, 2015 1:26 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

You realize any major 3D application has literally thousands of active bugs
at any one time, right?  Even with a team of 100 developers doing nothing
but bug fixing it's unlikely the application would ever reach bug-free
status.

The goal at this point is to remove all blocking issues and ensure features
that currently work do not regress.  Basically, just the stuff I reported.
The rest is unimportant ;-)



Matt





Date: Thu, 24 Sep 2015 16:21:01 +0200
From: <pete...@skynet.be>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>

likely last softimage SP ever, so if it leaves one bug alive, it?s not
enough...
From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new
features/bugfixes on SP2... Tough crowd :)
-- next part --
An HTML attachment was scrubbed...
URL:
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/00b9b977/attachment.html

--

Message: 2
Date: Thu, 24 Sep 2015 11:50:53 -0500
From: Pierre Schiller <activemotionpictu...@gmail.com>
Subject: Re: Lucas Martell VFXPHD - xsi lighting // Video reference?
To: softimage@listproc.autodesk.com
Message-ID:
<camqsyxrfaz-kmymqkdgnfz838ywqkdcywhtkamehds11v5b...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi Peter, I saw the vfxphd back in 2011. the subscription is yearly. so I
only remember he did some compo with the matte shadow and GI
That?s the only thing I?m asking: if anyone saw it (I believe it was lesson
2 or 3). Summarizing has nothing wrong.
*I didn?t say/wrote *"DESCRIBE SOME OF THEIR LESSON MATERIALS". So please
focus back on reading what I specifically wrote. Not what you think you?ve
read.

Good day.

On Thu, Sep 24, 2015 at 9:18 AM, <pete...@skynet.be> wrote:


come on man,
?I don?t have access to phdvfx so please tell me what was in some of their
lesson materials??
not the way to ask.




*From:* Pierre Schiller <activemotionpictu...@gmail.com>
*Sent:* Thursday, September 24, 2015 3:17 PM
*To:* softimage@listproc.autodesk.com
*Subject:* Re: Lucas Martell VFXPHD - xsi lighting // Video reference?


Bump
On Sep 22, 2015 11:03 AM, "Pierre Schiller" <
activemotionpictu...@gmail.com> wrote:


Hi, long ago (years ago) I saw the vfx phd with Lucas Martell about
lighting in xsi.
I seem to recall on lesson 2 or 3 he talks about making a shadow matte
pass to "mask"
another GI pass he made with physical sun. I would like to know if anyone
could please
share the steps in that video correctly? since I don?t have access to
phdvfx.
I?ve been doing my own setup but it?s nothing like he did it.

Please help.
Thanks.

Best regards.

--
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>






--
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>
-- next part --
An HTML attachment was scrubbed...
URL:
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/52f57623/attachment.html

--

Message: 3
Date: Thu, 24 Sep 2015 20:47:28 +0200
From: "Leendert A. Hartog" <hirazib...@live.nl>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>
Message-ID: <blu184-ds81d55b6dedc44d3504764df...@phx.gbl>
Content-Type: text/plain; charset="utf-8"

But if they are able to iron out ALL of the bugs, that would be a unique
selling-point to resurrect the software...
And that?s not even the main reason for that not being likely to happen.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de


From: pete...@skynet.be
Sent: Thursday, September 24, 2015 4:21 PM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

likely last softimage SP ever, so if it leaves one bug alive, it?s not
enough...
From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new
features/bugfixes on SP2... Tough crowd :)

-- next part --
An HTML attachment was scrubbed...
URL:
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/07c9

Re: SP2???

[Jason S]

  
  
On 09/24/15 19:47, Phil Harbath wrote:


  
  
There
  was a problem that broke the roads feature in emtopology in
  2015, not sure if Eric conveyed that to them.
  
  

  


Could that be another case of an in-compound nested 'reinterpret
location' node? 


  

Re: SP2???

[Martin Chatterjee]

Hi Hsiao Ming,

that's great news.

Could you please confirm that the *"Reinterpret Location"* compound bug has
been fixed for the upcoming SP2?

As far as I'm concerned this is probably the most critical 2015 bug out
there and we are keen on getting that one solved.

Thanks in advance,

Martin


--
   Martin Chatterjee

[ Freelance Technical Director ]
[   http://www.chatterjee.de   ]
[ https://vimeo.com/chatterjee ]

On Thu, Sep 17, 2015 at 8:19 AM, Hsiao Ming Chia <
hsiao.ming.c...@autodesk.com> wrote:

> Yes, there is another one coming soon.
>
> Thanks,
> Hsiao Ming
>
> From: softimage-boun...@listproc.autodesk.com [mailto:
> softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
> Sent: Thursday, September 17, 2015 2:19 AM
> To: softimage@listproc.autodesk.com
> Subject: Re: SP2???
>
> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
> fix. :)
>
> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
> <mailto:hirazib...@live.nl>> wrote:
> I might have missed the announcement, if so, sorry, but can we still
> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
> xsiforum.de<http://xsiforum.de>
>
>

Re: SP2???

[Cesar Saez]

Prepare yourself to read people  complaining about the lack of new
features/bugfixes on SP2... Tough crowd :)

Re: SP2???

[peter_b]

likely last softimage SP ever, so if it leaves one bug alive, it’s not enough...
From: Cesar Saez 
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com 
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)

Re: SP2???

[Leendert A. Hartog]

But if they are able to iron out ALL of the bugs, that would be a unique 
selling-point to resurrect the software... 
And that’s not even the main reason for that not being likely to happen.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de


From: pete...@skynet.be 
Sent: Thursday, September 24, 2015 4:21 PM
To: softimage@listproc.autodesk.com 
Subject: Re: SP2???

likely last softimage SP ever, so if it leaves one bug alive, it’s not enough...
From: Cesar Saez 
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com 
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)

RE: SP2???

[Phil Harbath]

There was a problem that broke the roads feature in emtopology in 2015, not 
sure if Eric conveyed that to them.

-Original Message-
From: "Matt Lind" <speye...@hotmail.com>
Sent: ‎9/‎24/‎2015 7:26 PM
To: "softimage@listproc.autodesk.com" <softimage@listproc.autodesk.com>
Subject: Re: SP2???

You realize any major 3D application has literally thousands of active bugs 
at any one time, right?  Even with a team of 100 developers doing nothing 
but bug fixing it's unlikely the application would ever reach bug-free 
status.

The goal at this point is to remove all blocking issues and ensure features 
that currently work do not regress.  Basically, just the stuff I reported. 
The rest is unimportant ;-)



Matt





Date: Thu, 24 Sep 2015 16:21:01 +0200
From: <pete...@skynet.be>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>

likely last softimage SP ever, so if it leaves one bug alive, it?s not 
enough...
From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)
-- next part --
An HTML attachment was scrubbed...
URL: 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/00b9b977/attachment.html

--

Message: 2
Date: Thu, 24 Sep 2015 11:50:53 -0500
From: Pierre Schiller <activemotionpictu...@gmail.com>
Subject: Re: Lucas Martell VFXPHD - xsi lighting // Video reference?
To: softimage@listproc.autodesk.com
Message-ID:
<camqsyxrfaz-kmymqkdgnfz838ywqkdcywhtkamehds11v5b...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi Peter, I saw the vfxphd back in 2011. the subscription is yearly. so I
only remember he did some compo with the matte shadow and GI
That?s the only thing I?m asking: if anyone saw it (I believe it was lesson
2 or 3). Summarizing has nothing wrong.
*I didn?t say/wrote *"DESCRIBE SOME OF THEIR LESSON MATERIALS". So please
focus back on reading what I specifically wrote. Not what you think you?ve
read.

Good day.

On Thu, Sep 24, 2015 at 9:18 AM, <pete...@skynet.be> wrote:

> come on man,
> ?I don?t have access to phdvfx so please tell me what was in some of their
> lesson materials??
> not the way to ask.
>
>
>
>
> *From:* Pierre Schiller <activemotionpictu...@gmail.com>
> *Sent:* Thursday, September 24, 2015 3:17 PM
> *To:* softimage@listproc.autodesk.com
> *Subject:* Re: Lucas Martell VFXPHD - xsi lighting // Video reference?
>
>
> Bump
> On Sep 22, 2015 11:03 AM, "Pierre Schiller" <
> activemotionpictu...@gmail.com> wrote:
>
>> Hi, long ago (years ago) I saw the vfx phd with Lucas Martell about
>> lighting in xsi.
>> I seem to recall on lesson 2 or 3 he talks about making a shadow matte
>> pass to "mask"
>> another GI pass he made with physical sun. I would like to know if anyone
>> could please
>> share the steps in that video correctly? since I don?t have access to
>> phdvfx.
>> I?ve been doing my own setup but it?s nothing like he did it.
>>
>> Please help.
>> Thanks.
>>
>> Best regards.
>>
>> --
>> Portfolio 2013 <http://be.net/3dcinetv>
>> Cinema & TV production
>> Video Reel <https://vimeo.com/3dcinetv/reel2012>
>>
>


-- 
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>
-- next part --
An HTML attachment was scrubbed...
URL: 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/52f57623/attachment.html

--

Message: 3
Date: Thu, 24 Sep 2015 20:47:28 +0200
From: "Leendert A. Hartog" <hirazib...@live.nl>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>
Message-ID: <blu184-ds81d55b6dedc44d3504764df...@phx.gbl>
Content-Type: text/plain; charset="utf-8"

But if they are able to iron out ALL of the bugs, that would be a unique 
selling-point to resurrect the software...
And that?s not even the main reason for that not being likely to happen.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de


From: pete...@skynet.be
Sent: Thursday, September 24, 2015 4:21 PM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

likely last softimage SP ever, so if it leaves one bug alive, it?s not 
enough...
From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)

-- next part --
An HTML attachment was

Re: SP2???

[Matt Lind]

You realize any major 3D application has literally thousands of active bugs 
at any one time, right?  Even with a team of 100 developers doing nothing 
but bug fixing it's unlikely the application would ever reach bug-free 
status.


The goal at this point is to remove all blocking issues and ensure features 
that currently work do not regress.  Basically, just the stuff I reported. 
The rest is unimportant ;-)




Matt





Date: Thu, 24 Sep 2015 16:21:01 +0200
From: <pete...@skynet.be>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>

likely last softimage SP ever, so if it leaves one bug alive, it?s not 
enough...

From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)

-- next part --
An HTML attachment was scrubbed...
URL: 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/00b9b977/attachment.html


--

Message: 2
Date: Thu, 24 Sep 2015 11:50:53 -0500
From: Pierre Schiller <activemotionpictu...@gmail.com>
Subject: Re: Lucas Martell VFXPHD - xsi lighting // Video reference?
To: softimage@listproc.autodesk.com
Message-ID:
<camqsyxrfaz-kmymqkdgnfz838ywqkdcywhtkamehds11v5b...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi Peter, I saw the vfxphd back in 2011. the subscription is yearly. so I
only remember he did some compo with the matte shadow and GI
That?s the only thing I?m asking: if anyone saw it (I believe it was lesson
2 or 3). Summarizing has nothing wrong.
*I didn?t say/wrote *"DESCRIBE SOME OF THEIR LESSON MATERIALS". So please
focus back on reading what I specifically wrote. Not what you think you?ve
read.

Good day.

On Thu, Sep 24, 2015 at 9:18 AM, <pete...@skynet.be> wrote:


come on man,
?I don?t have access to phdvfx so please tell me what was in some of their
lesson materials??
not the way to ask.




*From:* Pierre Schiller <activemotionpictu...@gmail.com>
*Sent:* Thursday, September 24, 2015 3:17 PM
*To:* softimage@listproc.autodesk.com
*Subject:* Re: Lucas Martell VFXPHD - xsi lighting // Video reference?


Bump
On Sep 22, 2015 11:03 AM, "Pierre Schiller" <
activemotionpictu...@gmail.com> wrote:


Hi, long ago (years ago) I saw the vfx phd with Lucas Martell about
lighting in xsi.
I seem to recall on lesson 2 or 3 he talks about making a shadow matte
pass to "mask"
another GI pass he made with physical sun. I would like to know if anyone
could please
share the steps in that video correctly? since I don?t have access to
phdvfx.
I?ve been doing my own setup but it?s nothing like he did it.

Please help.
Thanks.

Best regards.

--
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>






--
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>
-- next part --
An HTML attachment was scrubbed...
URL: 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/52f57623/attachment.html


--

Message: 3
Date: Thu, 24 Sep 2015 20:47:28 +0200
From: "Leendert A. Hartog" <hirazib...@live.nl>
Subject: Re: SP2???
To: <softimage@listproc.autodesk.com>
Message-ID: <blu184-ds81d55b6dedc44d3504764df...@phx.gbl>
Content-Type: text/plain; charset="utf-8"

But if they are able to iron out ALL of the bugs, that would be a unique 
selling-point to resurrect the software...

And that?s not even the main reason for that not being likely to happen.

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de


From: pete...@skynet.be
Sent: Thursday, September 24, 2015 4:21 PM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

likely last softimage SP ever, so if it leaves one bug alive, it?s not 
enough...

From: Cesar Saez
Sent: Thursday, September 24, 2015 11:04 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

Prepare yourself to read people  complaining about the lack of new 
features/bugfixes on SP2... Tough crowd :)


-- next part --
An HTML attachment was scrubbed...
URL: 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/07c921dd/attachment.html

-- next part --
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 1150 bytes
Desc: not available
Url : 
http://listproc.autodesk.com/pipermail/softimage/attachments/20150924/07c921dd/attachment.png


--

___
Softimage mailing list
Softimage@listproc.autodesk.com
http://listproc.autodesk.com/mailman/listinfo/softimage


End of Softimage Digest, Vol 82, Issue 91
* 

Re: SP2???

[Pierre Schiller]

BEST NEWS today!!

On Mon, Sep 21, 2015 at 6:59 PM, Ed Manning <etmth...@gmail.com> wrote:

> That is wonderful news
>
> On Thu, Sep 17, 2015 at 2:19 AM, Hsiao Ming Chia <
> hsiao.ming.c...@autodesk.com> wrote:
>
>> Yes, there is another one coming soon.
>>
>> Thanks,
>> Hsiao Ming
>>
>> From: softimage-boun...@listproc.autodesk.com [mailto:
>> softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
>> Sent: Thursday, September 17, 2015 2:19 AM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: SP2???
>>
>> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
>> fix. :)
>>
>> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
>> <mailto:hirazib...@live.nl>> wrote:
>> I might have missed the announcement, if so, sorry, but can we still
>> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>>
>> Greetz
>> Leendert
>> AKA Hirazi Blue
>> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
>> xsiforum.de<http://xsiforum.de>
>>
>>
>


-- 
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>

RE: SP2???

[Phil Harbath]

Here's hoping I don't need to install previous version first, never got around 
to it last time for that reason.

-Original Message-
From: "Pierre Schiller" <activemotionpictu...@gmail.com>
Sent: ‎9/‎22/‎2015 12:42 PM
To: "softimage@listproc.autodesk.com" <softimage@listproc.autodesk.com>
Subject: Re: SP2???

BEST NEWS today!!

On Mon, Sep 21, 2015 at 6:59 PM, Ed Manning <etmth...@gmail.com> wrote:

> That is wonderful news
>
> On Thu, Sep 17, 2015 at 2:19 AM, Hsiao Ming Chia <
> hsiao.ming.c...@autodesk.com> wrote:
>
>> Yes, there is another one coming soon.
>>
>> Thanks,
>> Hsiao Ming
>>
>> From: softimage-boun...@listproc.autodesk.com [mailto:
>> softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
>> Sent: Thursday, September 17, 2015 2:19 AM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: SP2???
>>
>> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
>> fix. :)
>>
>> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
>> <mailto:hirazib...@live.nl>> wrote:
>> I might have missed the announcement, if so, sorry, but can we still
>> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>>
>> Greetz
>> Leendert
>> AKA Hirazi Blue
>> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
>> xsiforum.de<http://xsiforum.de>
>>
>>
>


-- 
Portfolio 2013 <http://be.net/3dcinetv>
Cinema & TV production
Video Reel <https://vimeo.com/3dcinetv/reel2012>

Re: SP2???

[Steven Caron]

ya, that was/is lame

On Tue, Sep 22, 2015 at 10:01 AM, Phil Harbath 
wrote:

> Here's hoping I don't need to install previous version first, never got
> around to it last time for that reason.
>

Re: SP2???

[Ed Manning]

That is wonderful news

On Thu, Sep 17, 2015 at 2:19 AM, Hsiao Ming Chia <
hsiao.ming.c...@autodesk.com> wrote:

> Yes, there is another one coming soon.
>
> Thanks,
> Hsiao Ming
>
> From: softimage-boun...@listproc.autodesk.com [mailto:
> softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
> Sent: Thursday, September 17, 2015 2:19 AM
> To: softimage@listproc.autodesk.com
> Subject: Re: SP2???
>
> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
> fix. :)
>
> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
> <mailto:hirazib...@live.nl>> wrote:
> I might have missed the announcement, if so, sorry, but can we still
> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
> xsiforum.de<http://xsiforum.de>
>
>

Re: SP2???

[Jens Lindgren]

Awesome! Hope there will be a little more and serious fixes than SP1 :)

/Jens

On Fri, Sep 18, 2015 at 2:05 AM, Tenshi . <tenshu...@gmail.com> wrote:

> If this is true.. Applause for the XSI team, will be the last.. :(
>
> On Thu, Sep 17, 2015 at 11:50 AM, Andres Stephens <drais...@outlook.com>
> wrote:
>
>> Wonderful news.
>>
>>
>>
>>  Original message 
>> From: Hsiao Ming Chia <hsiao.ming.c...@autodesk.com>
>> Date: 17/09/2015 01:20 (GMT-05:00)
>> To: softimage@listproc.autodesk.com
>> Subject: RE: SP2???
>>
>> Yes, there is another one coming soon.
>>
>> Thanks,
>> Hsiao Ming
>>
>> From: softimage-boun...@listproc.autodesk.com [
>> mailto:softimage-boun...@listproc.autodesk.com
>> <softimage-boun...@listproc.autodesk.com>] On Behalf Of Tenshi .
>> Sent: Thursday, September 17, 2015 2:19 AM
>> To: softimage@listproc.autodesk.com
>> Subject: Re: SP2???
>>
>> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
>> fix. :)
>>
>> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
>> <mailto:hirazib...@live.nl>> wrote:
>> I might have missed the announcement, if so, sorry, but can we still
>> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>>
>> Greetz
>> Leendert
>> AKA Hirazi Blue
>> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
>> xsiforum.de<http://xsiforum.de>
>>
>>
>


-- 
Jens Lindgren

VFX Supervisor & Lead TD
Magoo 3D Studios <http://www.magoo3dstudios.com/>

RE: SP2???

[Hsiao Ming Chia]

Yes, there is another one coming soon.

Thanks,
Hsiao Ming

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
Sent: Thursday, September 17, 2015 2:19 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to fix. :)

On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
<hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
I might have missed the announcement, if so, sorry, but can we still expect a 
Softimage 2015 Service Pack 2 and if so, when will it be released?

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> & 
xsiforum.de<http://xsiforum.de>

<>

Re: SP2???

[Alen]

That is nice.

A

On 9/17/2015 8:19 AM, Hsiao Ming Chia wrote:

Yes, there is another one coming soon.

Thanks,
Hsiao Ming

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
Sent: Thursday, September 17, 2015 2:19 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to fix. :)

On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
<hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
I might have missed the announcement, if so, sorry, but can we still expect a 
Softimage 2015 Service Pack 2 and if so, when will it be released?

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> & 
xsiforum.de<http://xsiforum.de>

Re: SP2???

[Andres Stephens]

Wonderful news.


 Original message 
From: Hsiao Ming Chia <hsiao.ming.c...@autodesk.com>
Date: 17/09/2015  01:20  (GMT-05:00)
To: softimage@listproc.autodesk.com
Subject: RE: SP2???

Yes, there is another one coming soon.

Thanks,
Hsiao Ming

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Tenshi .
Sent: Thursday, September 17, 2015 2:19 AM
To: softimage@listproc.autodesk.com
Subject: Re: SP2???

I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to fix. :)

On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
<hirazib...@live.nl<mailto:hirazib...@live.nl>> wrote:
I might have missed the announcement, if so, sorry, but can we still expect a 
Softimage 2015 Service Pack 2 and if so, when will it be released?

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> & 
xsiforum.de<http://xsiforum.de>

Re: SP2???

[Tenshi .]

If this is true.. Applause for the XSI team, will be the last.. :(

On Thu, Sep 17, 2015 at 11:50 AM, Andres Stephens <drais...@outlook.com>
wrote:

> Wonderful news.
>
>
>
>  Original message 
> From: Hsiao Ming Chia <hsiao.ming.c...@autodesk.com>
> Date: 17/09/2015 01:20 (GMT-05:00)
> To: softimage@listproc.autodesk.com
> Subject: RE: SP2???
>
> Yes, there is another one coming soon.
>
> Thanks,
> Hsiao Ming
>
> From: softimage-boun...@listproc.autodesk.com [
> mailto:softimage-boun...@listproc.autodesk.com
> <softimage-boun...@listproc.autodesk.com>] On Behalf Of Tenshi .
> Sent: Thursday, September 17, 2015 2:19 AM
> To: softimage@listproc.autodesk.com
> Subject: Re: SP2???
>
> I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
> fix. :)
>
> On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog <hirazib...@live.nl
> <mailto:hirazib...@live.nl>> wrote:
> I might have missed the announcement, if so, sorry, but can we still
> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com<http://si-community.com> &
> xsiforum.de<http://xsiforum.de>
>
>

SP2???

[Leendert A. Hartog]

I might have missed the announcement, if so, sorry, but can we still expect a 
Softimage 2015 Service Pack 2 and if so, when will it be released?

Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de

Re: SP2???

[Tenshi .]

I'm waiting for that too. Please AD, do it. 2015 SP1 has a few things to
fix. :)

On Wed, Sep 16, 2015 at 5:46 AM, Leendert A. Hartog 
wrote:

> I might have missed the announcement, if so, sorry, but can we still
> expect a Softimage 2015 Service Pack 2 and if so, when will it be released?
>
> Greetz
> Leendert
> AKA Hirazi Blue
> Softimage hobbyist, admin at si-community.com & xsiforum.de
>

Re: Will there be an SP2 for Softimage 2015?

[Tenshi S.]

who can? xD

Anyway, so there's no news about a good definitely SP2 version coming out
this year.
It's so hard for AD to ask SI developers to include and fix everything they
can and give SI a proper end? That at least would clear their names. (just
a little.)

On Wed, Mar 25, 2015 at 2:45 PM, Mirko Jankovic mirkoj.anima...@gmail.com
wrote:

 Sry for the tone but still not over it... Cant help it
 On Mar 25, 2015 8:45 PM, Mirko Jankovic mirkoj.anima...@gmail.com
 wrote:

 Well for max maya and other crap ;) hardly for si
 On Mar 25, 2015 8:42 PM, Sven Constable sixsi_l...@imagefront.de
 wrote:

 I don't know. It's quite some time before Feb 2016. ADSK should fill it
 with something useful.



 *From:* softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] *On Behalf Of *Mirko Jankovic
 *Sent:* Wednesday, March 25, 2015 5:03 PM
 *To:* softimage@listproc.autodesk.com
 *Subject:* Re: Will there be an SP2 for Softimage 2015?



 bet is that probably wont be one at all. AD didn't really look at SI
 even when it wasn't completly killed, you really think they will spend a
 single sec more on it :P



 On Wed, Mar 25, 2015 at 4:58 PM, Nuno Conceicao 
 nunoalexconcei...@gmail.com wrote:

 Last Service Pack they solved only 9 bugs,my bet on the next one is just
 3...



 On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer 
 cont...@marioreitbauer.at wrote:

 I would say that that is a subjective feeling ;)



 2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.



 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel 
 maurice.pa...@autodesk.com wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?


 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

RE: Will there be an SP2 for Softimage 2015?

[Ivan Tay]

Hi Eric,

We are aware of the issue. It was logged few months back – BSPR-18164.

-Ivan

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
Sent: Monday, March 23, 2015 9:27 PM
To: softimage@listproc.autodesk.com
Subject: Will there be an SP2 for Softimage 2015?

I had posted a replicable and verified bug regarding the fact that a few--and 
likely many--commands do not iterate over multiple deltas attached to a 
reference model. While I have no idea if that bug is a low enough hanging fruit 
to fix before all of us lose support in 2016, I also have no idea whether or 
not we will even be seeing an SP2 for Softimage. As my subscription is coming 
due in a couple months, I am wondering if it will even be worth it. It 
certainly is not worth it for Maya (even with Bifrost.) Also I am still unclear 
as to the status of the permanent license of Softimage if I do another 
subscription.

Thanks,
-=Eric
--




-=T=-
attachment: winmail.dat

Re: Will there be an SP2 for Softimage 2015?

[Mario Reitbauer]

I would say that that is a subjective feeling ;)

2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.

 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel maurice.pa...@autodesk.com
  wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?

 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

Re: Will there be an SP2 for Softimage 2015?

[Nuno Conceicao]

Last Service Pack they solved only 9 bugs,my bet on the next one is just
3...

On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer cont...@marioreitbauer.at
wrote:

 I would say that that is a subjective feeling ;)

 2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.

 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel 
 maurice.pa...@autodesk.com wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?

 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

Re: Will there be an SP2 for Softimage 2015?

[Mirko Jankovic]

bet is that probably wont be one at all. AD didn't really look at SI even
when it wasn't completly killed, you really think they will spend a single
sec more on it :P

On Wed, Mar 25, 2015 at 4:58 PM, Nuno Conceicao nunoalexconcei...@gmail.com
 wrote:

 Last Service Pack they solved only 9 bugs,my bet on the next one is just
 3...

 On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer 
 cont...@marioreitbauer.at wrote:

 I would say that that is a subjective feeling ;)

 2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.

 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel 
 maurice.pa...@autodesk.com wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?

 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

RE: Will there be an SP2 for Softimage 2015?

[Sven Constable]

I don't know. It's quite some time before Feb 2016. ADSK should fill it with 
something useful.

 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Mirko Jankovic
Sent: Wednesday, March 25, 2015 5:03 PM
To: softimage@listproc.autodesk.com
Subject: Re: Will there be an SP2 for Softimage 2015?

 

bet is that probably wont be one at all. AD didn't really look at SI even when 
it wasn't completly killed, you really think they will spend a single sec more 
on it :P

 

On Wed, Mar 25, 2015 at 4:58 PM, Nuno Conceicao nunoalexconcei...@gmail.com 
wrote:

Last Service Pack they solved only 9 bugs,my bet on the next one is just 3...

 

On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer cont...@marioreitbauer.at 
wrote:

I would say that that is a subjective feeling ;)

 

2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

Hi Maurice.,

Can you confirm if there will be an SP2 for Softimage 2015? Most of the times 
the SP2 are the best out there to work in production.

 

On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel maurice.pa...@autodesk.com 
wrote:

HI Eric,
I am not sure about the status of the bug you reported, you had best contact 
support for that while still on Subscription. Your current license for 
Softimage is perpetual so you can continue to use it even if you do not renew 
subscription. If service packs are issued they are made available to all 
license holders whether they are on Subscription or not. Only extensions are 
reserved for Subscription customers and we are not developing new extensions 
for Softimage.
Hope that helps
maurice

Maurice Patel
Autodesk : Tél:  514 954-7134 tel:514%20954-7134 

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
Sent: Monday, March 23, 2015 9:27 AM
To: softimage@listproc.autodesk.com
Subject: Will there be an SP2 for Softimage 2015?


I had posted a replicable and verified bug regarding the fact that a few--and 
likely many--commands do not iterate over multiple deltas attached to a 
reference model. While I have no idea if that bug is a low enough hanging fruit 
to fix before all of us lose support in 2016, I also have no idea whether or 
not we will even be seeing an SP2 for Softimage. As my subscription is coming 
due in a couple months, I am wondering if it will even be worth it. It 
certainly is not worth it for Maya (even with Bifrost.) Also I am still unclear 
as to the status of the permanent license of Softimage if I do another 
subscription.

Thanks,
-=Eric
--




-=T=-

 

 

 

 

RE: Will there be an SP2 for Softimage 2015?

[Mirko Jankovic]

Sry for the tone but still not over it... Cant help it
On Mar 25, 2015 8:45 PM, Mirko Jankovic mirkoj.anima...@gmail.com wrote:

 Well for max maya and other crap ;) hardly for si
 On Mar 25, 2015 8:42 PM, Sven Constable sixsi_l...@imagefront.de
 wrote:

 I don't know. It's quite some time before Feb 2016. ADSK should fill it
 with something useful.



 *From:* softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] *On Behalf Of *Mirko Jankovic
 *Sent:* Wednesday, March 25, 2015 5:03 PM
 *To:* softimage@listproc.autodesk.com
 *Subject:* Re: Will there be an SP2 for Softimage 2015?



 bet is that probably wont be one at all. AD didn't really look at SI even
 when it wasn't completly killed, you really think they will spend a single
 sec more on it :P



 On Wed, Mar 25, 2015 at 4:58 PM, Nuno Conceicao 
 nunoalexconcei...@gmail.com wrote:

 Last Service Pack they solved only 9 bugs,my bet on the next one is just
 3...



 On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer 
 cont...@marioreitbauer.at wrote:

 I would say that that is a subjective feeling ;)



 2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.



 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel 
 maurice.pa...@autodesk.com wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?


 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

RE: Will there be an SP2 for Softimage 2015?

[Mirko Jankovic]

Well for max maya and other crap ;) hardly for si
On Mar 25, 2015 8:42 PM, Sven Constable sixsi_l...@imagefront.de wrote:

 I don't know. It's quite some time before Feb 2016. ADSK should fill it
 with something useful.



 *From:* softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] *On Behalf Of *Mirko Jankovic
 *Sent:* Wednesday, March 25, 2015 5:03 PM
 *To:* softimage@listproc.autodesk.com
 *Subject:* Re: Will there be an SP2 for Softimage 2015?



 bet is that probably wont be one at all. AD didn't really look at SI even
 when it wasn't completly killed, you really think they will spend a single
 sec more on it :P



 On Wed, Mar 25, 2015 at 4:58 PM, Nuno Conceicao 
 nunoalexconcei...@gmail.com wrote:

 Last Service Pack they solved only 9 bugs,my bet on the next one is just
 3...



 On Wed, Mar 25, 2015 at 9:18 AM, Mario Reitbauer 
 cont...@marioreitbauer.at wrote:

 I would say that that is a subjective feeling ;)



 2015-03-24 19:57 GMT+01:00 Tenshi S. tenshu...@gmail.com:

 Hi Maurice.,

 Can you confirm if there will be an SP2 for Softimage 2015? Most of the
 times the SP2 are the best out there to work in production.



 On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel maurice.pa...@autodesk.com
 wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?


 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

RE: Will there be an SP2 for Softimage 2015?

[Maurice Patel]

HI Eric,
I am not sure about the status of the bug you reported, you had best contact 
support for that while still on Subscription. Your current license for 
Softimage is perpetual so you can continue to use it even if you do not renew 
subscription. If service packs are issued they are made available to all 
license holders whether they are on Subscription or not. Only extensions are 
reserved for Subscription customers and we are not developing new extensions 
for Softimage.
Hope that helps
maurice

Maurice Patel
Autodesk : Tél:  514 954-7134

From: softimage-boun...@listproc.autodesk.com 
[mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
Sent: Monday, March 23, 2015 9:27 AM
To: softimage@listproc.autodesk.com
Subject: Will there be an SP2 for Softimage 2015?

I had posted a replicable and verified bug regarding the fact that a few--and 
likely many--commands do not iterate over multiple deltas attached to a 
reference model. While I have no idea if that bug is a low enough hanging fruit 
to fix before all of us lose support in 2016, I also have no idea whether or 
not we will even be seeing an SP2 for Softimage. As my subscription is coming 
due in a couple months, I am wondering if it will even be worth it. It 
certainly is not worth it for Maya (even with Bifrost.) Also I am still unclear 
as to the status of the permanent license of Softimage if I do another 
subscription.

Thanks,
-=Eric
--




-=T=-
attachment: winmail.dat

Re: Will there be an SP2 for Softimage 2015?

[Tenshi S.]

Hi Maurice.,

Can you confirm if there will be an SP2 for Softimage 2015? Most of the
times the SP2 are the best out there to work in production.

On Tue, Mar 24, 2015 at 9:18 AM, Maurice Patel maurice.pa...@autodesk.com
wrote:

 HI Eric,
 I am not sure about the status of the bug you reported, you had best
 contact support for that while still on Subscription. Your current license
 for Softimage is perpetual so you can continue to use it even if you do not
 renew subscription. If service packs are issued they are made available to
 all license holders whether they are on Subscription or not. Only
 extensions are reserved for Subscription customers and we are not
 developing new extensions for Softimage.
 Hope that helps
 maurice

 Maurice Patel
 Autodesk : Tél:  514 954-7134

 From: softimage-boun...@listproc.autodesk.com [mailto:
 softimage-boun...@listproc.autodesk.com] On Behalf Of Eric Turman
 Sent: Monday, March 23, 2015 9:27 AM
 To: softimage@listproc.autodesk.com
 Subject: Will there be an SP2 for Softimage 2015?

 I had posted a replicable and verified bug regarding the fact that a
 few--and likely many--commands do not iterate over multiple deltas attached
 to a reference model. While I have no idea if that bug is a low enough
 hanging fruit to fix before all of us lose support in 2016, I also have no
 idea whether or not we will even be seeing an SP2 for Softimage. As my
 subscription is coming due in a couple months, I am wondering if it will
 even be worth it. It certainly is not worth it for Maya (even with
 Bifrost.) Also I am still unclear as to the status of the permanent license
 of Softimage if I do another subscription.

 Thanks,
 -=Eric
 --




 -=T=-

Will there be an SP2 for Softimage 2015?

[Eric Turman]

I had posted a replicable and verified bug regarding the fact that a
few--and likely many--commands do not iterate over multiple deltas attached
to a reference model. While I have no idea if that bug is a low enough
hanging fruit to fix before all of us lose support in 2016, I also have no
idea whether or not we will even be seeing an SP2 for Softimage. As my
subscription is coming due in a couple months, I am wondering if it will
even be worth it. It certainly is not worth it for Maya (even with
Bifrost.) Also I am still unclear as to the status of the permanent license
of Softimage if I do another subscription.

Thanks,
-=Eric
-- 




-=T=-

Re: Multiple Objects, Snapping w/ unexpected results - 2014 2014 sp2

[Toonafish]

yep, I think I get the same behavior. I created 3 cubes that are aligned 
to the grid on all axis, and a single one is not. Then I select all of 
them, activate grid snap, and as soon as I translate the selected cubes 
in a single axis, the one that is not aligned snaps back to the grid and 
the others stay put.


-Ronald


On 6/26/2014 5:59, Patrick Neese wrote:

Okay so...I've read the manual, searched the list and reset my
preferences and tried the earlier version of 2014.

I have several objects that are aligned to each other.  When I select
them and translate them using the manipulator for all three axis, w
/snapping, in Global mode and COG on or a pivot point, no issues. They
move as one unit snapping to the CG/Pivot Point.

If I haven't frozen the transforms and select a single axis to
translate, the objects will snap initially  independently of each
other and then move as a unit.  I just wanted to scoot everything in a
single direction and keep them aligned.

To recreate PrimitivesPolygon MeshCube.
Repeat.
Offset one halfway between the grid lines in all axis.
Select both.
Press CTRL and translate with one axis handle for an axis that vary in values.
Watch the one that was offset snap while the other stays still.

Freezing the objects prior to trying to translate resolves this.  I
can also set a parent and move that parent...neither seem like the
best solution.  To me this doesn't seem to be expected functionality.
Am I missing something? Is this expected? Has it always been like
this?

From the manual When COG is on, the objects preserve their positions
relative to each other, and their combined center of geometry snaps to
the target.  From that sentence in the manual I feel it is unexpected
behavior.

Patrick N.





--
Ronald van Vemden
---
3D Graphics  Animation
Cyberfish Laboratories | www.cyberfish.nl
Toonafish | www.toonafish.nl
tel. +31(0)20 5289291
fax  +31(0)20 5289292
email: ron...@toonafish.nl

Re: Multiple Objects, Snapping w/ unexpected results - 2014 2014 sp2

[Patrick Neese]

Thanks for your reply gentlemen.

Here is a video of my issue with annotations.

http://youtu.be/0T1t-sR5mcI

If anyone has a proper work around for this or even an addon tool that
helps with aligning or the like please let me know.

Perhaps my work flow is incorrect for duplicating and moving multiple
items.  I was working on a wood panel wall section with molding for a
scene when I noticed this...then noticed mutliple items were now
incorrectly aligned.

Patrick

On Thu, Jun 26, 2014 at 12:32 AM, Toonafish ron...@toonafish.nl wrote:
 yep, I think I get the same behavior. I created 3 cubes that are aligned to
 the grid on all axis, and a single one is not. Then I select all of them,
 activate grid snap, and as soon as I translate the selected cubes in a
 single axis, the one that is not aligned snaps back to the grid and the
 others stay put.

 -Ronald



 On 6/26/2014 5:59, Patrick Neese wrote:

 Okay so...I've read the manual, searched the list and reset my
 preferences and tried the earlier version of 2014.

 I have several objects that are aligned to each other.  When I select
 them and translate them using the manipulator for all three axis, w
 /snapping, in Global mode and COG on or a pivot point, no issues. They
 move as one unit snapping to the CG/Pivot Point.

 If I haven't frozen the transforms and select a single axis to
 translate, the objects will snap initially  independently of each
 other and then move as a unit.  I just wanted to scoot everything in a
 single direction and keep them aligned.

 To recreate PrimitivesPolygon MeshCube.
 Repeat.
 Offset one halfway between the grid lines in all axis.
 Select both.
 Press CTRL and translate with one axis handle for an axis that vary in
 values.
 Watch the one that was offset snap while the other stays still.

 Freezing the objects prior to trying to translate resolves this.  I
 can also set a parent and move that parent...neither seem like the
 best solution.  To me this doesn't seem to be expected functionality.
 Am I missing something? Is this expected? Has it always been like
 this?

 From the manual When COG is on, the objects preserve their positions
 relative to each other, and their combined center of geometry snaps to
 the target.  From that sentence in the manual I feel it is unexpected
 behavior.

 Patrick N.




 --
 Ronald van Vemden
 ---
 3D Graphics  Animation
 Cyberfish Laboratories | www.cyberfish.nl
 Toonafish | www.toonafish.nl
 tel. +31(0)20 5289291
 fax  +31(0)20 5289292
 email: ron...@toonafish.nl

Multiple Objects, Snapping w/ unexpected results - 2014 2014 sp2

[Patrick Neese]

Okay so...I've read the manual, searched the list and reset my
preferences and tried the earlier version of 2014.

I have several objects that are aligned to each other.  When I select
them and translate them using the manipulator for all three axis, w
/snapping, in Global mode and COG on or a pivot point, no issues. They
move as one unit snapping to the CG/Pivot Point.

If I haven't frozen the transforms and select a single axis to
translate, the objects will snap initially  independently of each
other and then move as a unit.  I just wanted to scoot everything in a
single direction and keep them aligned.

To recreate PrimitivesPolygon MeshCube.
Repeat.
Offset one halfway between the grid lines in all axis.
Select both.
Press CTRL and translate with one axis handle for an axis that vary in values.
Watch the one that was offset snap while the other stays still.

Freezing the objects prior to trying to translate resolves this.  I
can also set a parent and move that parent...neither seem like the
best solution.  To me this doesn't seem to be expected functionality.
Am I missing something? Is this expected? Has it always been like
this?

From the manual When COG is on, the objects preserve their positions
relative to each other, and their combined center of geometry snaps to
the target.  From that sentence in the manual I feel it is unexpected
behavior.

Patrick N.

softimage 2014 sp2 buggy animation mixing

[Steven Caron]

has anyone noticed 2014 sp2 being particularly buggy in this area?

i got hangs when i adjust the weights sometimes.

s

Re: Linux: 2014 sp2 install notes and stuff

[Thomas Volkmann]

Congratulations! You will be nominated for this years life-achievement 
award!

Can you save scenes and reopen them?

cheers,
thomas



On 09/29/2013 06:32 AM, Jon Swindells wrote:
just some notes from the past week or so on getting 2014 installed and 
working

well in Mint 15 Cinnamon.

Most of this info, if not all, is available on the webs (most of it on 
Stephen's blog) but, as i used
the list extensively when looking for answers, i though this would be 
the appropriate place for my notes.


##
NOTES:
update everything BEFORE proprietry driver: // wasn't obvious to my 
win-centric mindset

sudo apt-get update  sudo apt-get upgrade  sudo apt-get dist-upgrade
//reboot into new kernel if tehre is one
// headers
sudo apt-get install -y linux-headers-$(uname -r)

i needed cuda but if you don't, go with the os nvidia drivers.
xsi/maya worked best with 310's for me, later drivers gave me 
segfaults in xsi - quite

possibly due to conflicting ogl linkage.

  CUDA  
only needed for cuda dev (ie, you only need this install if you plan 
on compiling your own cuda apps)


https://developer.nvidia.com/cuda-downloads
i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i 
think the deb package would be easier

all round. ah well. live and learn

the installer always crapped out if i didn't split/unpack it:
sh cuda*.run -extract=/path/to/extract/dir/

drivers: NVIDIA-Linux-x86_64-319.37
cuda: cuda-linux64-rel-5.5.22-16488124
samples: cuda-samples-linux-5.5.22-16488124
!!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to 
build or altenate 4.6!!!


//install Driver, cuda then samples

drop to a cmd shell (ctr+alt + F2)
stop x server:
sudo service mdm stop ##cinnamon/mate
## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
sudo nano /etc/default/grub
add or change GRUB_CMDLINE_LINUX_DEFAULT :
GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
Save, close nano
sudo update-grub
sudo reboot ## i blacklisted the other drivers before rebooting

at log in prompt drop to a shell again,stop the mdm and:
sudo nano /etc/modprobe.d/blacklist.conf
add to the end:
blacklist amd76x_edac
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist NVidiafb
blacklist rivatv
save and quit nano
if you had previous nvidia drivers: ## i didn't
sudo apt-get remove --purge NVidia*

install driver:
sudo sh NVIDIA-Linux-x64-319.37.run
registered with DKMS
NO to 32 bit libs ## if you want 32bit support,
 ## you'll need to do some shennanigans with xsi to
 ## stop it segfaulting (see below)
yes to run the xconfig util ## always failed for me but they still 
went in fine every time - permissions ??

it once asked me to remove nouveau - it failed. did it above anyway

Reboot and you should be good to go.

http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
!!! pts 5  7 !!!
libGL.so -- this puppy is the cause of most startup segfaults, xsi 
typically can't find it


cuda would only install from cmd shell with mdm stopped.

samples went in without issue every time (from desktop even)

i used ~/.bashrc to export required paths:
export PATH=$PATH:/usr/local/cuda-5.5/bin
export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



XSI PRE-INSTALL NOTES:
deps: tcsh, alien lsb gamin ## i didn't make a note of these but 
you'll know instantly if you don't have the right dependencies for install

extra downloads:
 ##the adlm that comes with 2014 sp2 will not install for me no matter 
what i do

http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
tar xzvf nlm11.11_ipv4_linux64.tar.gz
use alien on the rpms
sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts 
and install (dkpg -i)



the setup script references /usr/lib64, doesn't exist on mint so -

ln -s /usr/lib /usr/lib64 ## or change the setup script

mental ray:
sudo mkdir /usr/tmp/
sudo chmod a+wr /usr/tmp/
## or simlink to /tmp, up to you

make sure _setup has the right permissions (note the underscore) 
(chmod +x )

tcsh
sudo sh setup
i used network for my server type but this:
http://wikihelp.autodesk.com/Installation_Help/enu/2014/Help/0161-Product_161/0538-Softimag538/0539-Softimag539/0540-Softimag540/0541-Installi541
leads me to believe that you could probably use a standalone edu 
license in 2014 ala maya


setup usually goes ok but with errors:
Error: Application/bin/cmdreg -f Application/bin/XSICOMDLLs.lst
Error: Registering python
the rpm errors can be ignored if you set it up previously.

you'll need to register the stuff the installer missed: (from SB's blog)
tcsh
source /usr/Softimage/Softimage_2014_SP2/.xsi_2014_SP2
cd /usr/Softimage/Softimage_2014_SP2/Application/bin/
cmdreg libdsprsr.so
ldd for any missing libs and install them
register com dlls
tcsh
cd /usr/Softimage/Softimage_2014_SP2/Application/bin/
cmdreg -f XSICOMDLLs.lst

register python
mwpython win32com

Re: Linux: 2014 sp2 install notes and stuff

[Mirko Jankovic]

Honestly I still think that it is cheaper, faster and nerve saving to
actually get windows and install without problems, then to have to hire
Linux pro just to install software and then try to keep it working without
problems :)


On Sun, Sep 29, 2013 at 9:51 AM, Thomas Volkmann
li...@thomasvolkmann.comwrote:

  Congratulations! You will be nominated for this years life-achievement
 award!
 Can you save scenes and reopen them?

 cheers,
 thomas




 On 09/29/2013 06:32 AM, Jon Swindells wrote:

 just some notes from the past week or so on getting 2014 installed and
 working
 well in Mint 15 Cinnamon.

  Most of this info, if not all, is available on the webs (most of it on
 Stephen's blog) but, as i used
 the list extensively when looking for answers, i though this would be the
 appropriate place for my notes.

  ##
  NOTES:
 update everything BEFORE proprietry driver: // wasn't obvious to my
 win-centric mindset
  sudo apt-get update  sudo apt-get upgrade  sudo apt-get dist-upgrade
  //reboot into new kernel if tehre is one
  // headers
  sudo apt-get install -y linux-headers-$(uname -r)

  i needed cuda but if you don't, go with the os nvidia drivers.
 xsi/maya worked best with 310's for me, later drivers gave me segfaults in
 xsi - quite
 possibly due to conflicting ogl linkage.

    CUDA  
 only needed for cuda dev (ie, you only need this install if you plan on
 compiling your own cuda apps)

  https://developer.nvidia.com/cuda-downloads
 i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i think
 the deb package would be easier
 all round. ah well. live and learn

  the installer always crapped out if i didn't split/unpack it:
  sh cuda*.run -extract=/path/to/extract/dir/

  drivers : NVIDIA-Linux-x86_64-319.37
 cuda : cuda-linux64-rel-5.5.22-16488124
 samples : cuda-samples-linux-5.5.22-16488124
 !!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to build
 or altenate 4.6!!!

  //install Driver, cuda then samples

  drop to a cmd shell (ctr+alt + F2)
  stop x server:
  sudo service mdm stop ##cinnamon/mate
  ## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
  sudo nano /etc/default/grub
  add or change GRUB_CMDLINE_LINUX_DEFAULT :
  GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
  Save, close nano
  sudo update-grub
  sudo reboot ## i blacklisted the other drivers before rebooting

  at log in prompt drop to a shell again,stop the mdm and:
  sudo nano /etc/modprobe.d/blacklist.conf
  add to the end:
  blacklist amd76x_edac
  blacklist vga16fb
  blacklist nouveau
  blacklist rivafb
  blacklist NVidiafb
  blacklist rivatv
  save and quit nano
   if you had previous nvidia drivers: ## i didn't
  sudo apt-get remove --purge NVidia*

  install driver:
  sudo sh NVIDIA-Linux-x64-319.37.run
  registered with DKMS
  NO to 32 bit libs ## if you want 32bit support,
   ## you'll need to do some shennanigans with xsi to
   ## stop it segfaulting (see below)
  yes to run the xconfig util ## always failed for me but they still went
 in fine every time - permissions ??
  it once asked me to remove nouveau - it failed. did it above anyway

  Reboot and you should be good to go.


 http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
 !!! pts 5  7 !!!
 libGL.so -- this puppy is the cause of most startup segfaults, xsi
 typically can't find it

  cuda would only install from cmd shell with mdm stopped.

  samples went in without issue every time (from desktop even)

  i used ~/.bashrc to export required paths:
  export PATH=$PATH:/usr/local/cuda-5.5/bin
  export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



  XSI PRE-INSTALL NOTES:
 deps: tcsh, alien lsb gamin ## i didn't make a note of these but you'll
 know instantly if you don't have the right dependencies for install
 extra downloads:
  ##the adlm that comes with 2014 sp2 will not install for me no matter
 what i do
  http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
  tar xzvf nlm11.11_ipv4_linux64.tar.gz
  use alien on the rpms
  sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts and
 install (dkpg -i)


  the setup script references /usr/lib64, doesn't exist on mint so -

  ln -s /usr/lib /usr/lib64   ## or change the setup script

  mental ray:
  sudo mkdir /usr/tmp/
  sudo chmod a+wr /usr/tmp/
  ## or simlink to /tmp, up to you

  make sure _setup has the right permissions (note the underscore) (chmod
 +x )
  tcsh
  sudo sh setup
 i used network for my server type but this:

 http://wikihelp.autodesk.com/Installation_Help/enu/2014/Help/0161-Product_161/0538-Softimag538/0539-Softimag539/0540-Softimag540/0541-Installi541
 leads me to believe that you could probably use a standalone edu license
 in 2014 ala maya

  setup usually goes ok but with errors:
  Error: Application/bin/cmdreg -f Application/bin/XSICOMDLLs.lst
  Error

Re: Linux: 2014 sp2 install notes and stuff

[Jon Swindells]

they open and save and open and save fine :)

will i need to dress for this award or will jeans and T do ?


On 29 September 2013 10:51, Thomas Volkmann li...@thomasvolkmann.comwrote:

  Congratulations! You will be nominated for this years life-achievement
 award!
 Can you save scenes and reopen them?

 cheers,
 thomas




 On 09/29/2013 06:32 AM, Jon Swindells wrote:

 just some notes from the past week or so on getting 2014 installed and
 working
 well in Mint 15 Cinnamon.

  Most of this info, if not all, is available on the webs (most of it on
 Stephen's blog) but, as i used
 the list extensively when looking for answers, i though this would be the
 appropriate place for my notes.

  ##
  NOTES:
 update everything BEFORE proprietry driver: // wasn't obvious to my
 win-centric mindset
  sudo apt-get update  sudo apt-get upgrade  sudo apt-get dist-upgrade
  //reboot into new kernel if tehre is one
  // headers
  sudo apt-get install -y linux-headers-$(uname -r)

  i needed cuda but if you don't, go with the os nvidia drivers.
 xsi/maya worked best with 310's for me, later drivers gave me segfaults in
 xsi - quite
 possibly due to conflicting ogl linkage.

    CUDA  
 only needed for cuda dev (ie, you only need this install if you plan on
 compiling your own cuda apps)

  https://developer.nvidia.com/cuda-downloads
 i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i think
 the deb package would be easier
 all round. ah well. live and learn

  the installer always crapped out if i didn't split/unpack it:
  sh cuda*.run -extract=/path/to/extract/dir/

  drivers : NVIDIA-Linux-x86_64-319.37
 cuda : cuda-linux64-rel-5.5.22-16488124
 samples : cuda-samples-linux-5.5.22-16488124
 !!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to build
 or altenate 4.6!!!

  //install Driver, cuda then samples

  drop to a cmd shell (ctr+alt + F2)
  stop x server:
  sudo service mdm stop ##cinnamon/mate
  ## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
  sudo nano /etc/default/grub
  add or change GRUB_CMDLINE_LINUX_DEFAULT :
  GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
  Save, close nano
  sudo update-grub
  sudo reboot ## i blacklisted the other drivers before rebooting

  at log in prompt drop to a shell again,stop the mdm and:
  sudo nano /etc/modprobe.d/blacklist.conf
  add to the end:
  blacklist amd76x_edac
  blacklist vga16fb
  blacklist nouveau
  blacklist rivafb
  blacklist NVidiafb
  blacklist rivatv
  save and quit nano
   if you had previous nvidia drivers: ## i didn't
  sudo apt-get remove --purge NVidia*

  install driver:
  sudo sh NVIDIA-Linux-x64-319.37.run
  registered with DKMS
  NO to 32 bit libs ## if you want 32bit support,
   ## you'll need to do some shennanigans with xsi to
   ## stop it segfaulting (see below)
  yes to run the xconfig util ## always failed for me but they still went
 in fine every time - permissions ??
  it once asked me to remove nouveau - it failed. did it above anyway

  Reboot and you should be good to go.


 http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
 !!! pts 5  7 !!!
 libGL.so -- this puppy is the cause of most startup segfaults, xsi
 typically can't find it

  cuda would only install from cmd shell with mdm stopped.

  samples went in without issue every time (from desktop even)

  i used ~/.bashrc to export required paths:
  export PATH=$PATH:/usr/local/cuda-5.5/bin
  export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



  XSI PRE-INSTALL NOTES:
 deps: tcsh, alien lsb gamin ## i didn't make a note of these but you'll
 know instantly if you don't have the right dependencies for install
 extra downloads:
  ##the adlm that comes with 2014 sp2 will not install for me no matter
 what i do
  http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
  tar xzvf nlm11.11_ipv4_linux64.tar.gz
  use alien on the rpms
  sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts and
 install (dkpg -i)


  the setup script references /usr/lib64, doesn't exist on mint so -

  ln -s /usr/lib /usr/lib64   ## or change the setup script

  mental ray:
  sudo mkdir /usr/tmp/
  sudo chmod a+wr /usr/tmp/
  ## or simlink to /tmp, up to you

  make sure _setup has the right permissions (note the underscore) (chmod
 +x )
  tcsh
  sudo sh setup
 i used network for my server type but this:

 http://wikihelp.autodesk.com/Installation_Help/enu/2014/Help/0161-Product_161/0538-Softimag538/0539-Softimag539/0540-Softimag540/0541-Installi541
 leads me to believe that you could probably use a standalone edu license
 in 2014 ala maya

  setup usually goes ok but with errors:
  Error: Application/bin/cmdreg -f Application/bin/XSICOMDLLs.lst
  Error: Registering python
 the rpm errors can be ignored if you set it up previously.

  you'll need to register the stuff

Re: Linux: 2014 sp2 install notes and stuff

[Jon Swindells]

I can't honestly disagree with you Mirko.

It's only really in regards to xsi though. maya*, modo, houdini, nuke,
mari, blender and others are all vastly better on linux it's not even funny


*not if you want vp2.0 though


On 29 September 2013 12:21, Mirko Jankovic mirkoj.anima...@gmail.comwrote:

 Honestly I still think that it is cheaper, faster and nerve saving to
 actually get windows and install without problems, then to have to hire
 Linux pro just to install software and then try to keep it working without
 problems :)


 On Sun, Sep 29, 2013 at 9:51 AM, Thomas Volkmann li...@thomasvolkmann.com
  wrote:

  Congratulations! You will be nominated for this years life-achievement
 award!
 Can you save scenes and reopen them?

 cheers,
 thomas




 On 09/29/2013 06:32 AM, Jon Swindells wrote:

 just some notes from the past week or so on getting 2014 installed and
 working
 well in Mint 15 Cinnamon.

  Most of this info, if not all, is available on the webs (most of it on
 Stephen's blog) but, as i used
 the list extensively when looking for answers, i though this would be the
 appropriate place for my notes.

  ##
  NOTES:
 update everything BEFORE proprietry driver: // wasn't obvious to my
 win-centric mindset
  sudo apt-get update  sudo apt-get upgrade  sudo apt-get dist-upgrade
  //reboot into new kernel if tehre is one
  // headers
  sudo apt-get install -y linux-headers-$(uname -r)

  i needed cuda but if you don't, go with the os nvidia drivers.
 xsi/maya worked best with 310's for me, later drivers gave me segfaults
 in xsi - quite
 possibly due to conflicting ogl linkage.

    CUDA  
 only needed for cuda dev (ie, you only need this install if you plan on
 compiling your own cuda apps)

  https://developer.nvidia.com/cuda-downloads
 i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i think
 the deb package would be easier
 all round. ah well. live and learn

  the installer always crapped out if i didn't split/unpack it:
  sh cuda*.run -extract=/path/to/extract/dir/

  drivers : NVIDIA-Linux-x86_64-319.37
 cuda : cuda-linux64-rel-5.5.22-16488124
 samples : cuda-samples-linux-5.5.22-16488124
 !!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to build
 or altenate 4.6!!!

  //install Driver, cuda then samples

  drop to a cmd shell (ctr+alt + F2)
  stop x server:
  sudo service mdm stop ##cinnamon/mate
  ## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
  sudo nano /etc/default/grub
  add or change GRUB_CMDLINE_LINUX_DEFAULT :
  GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
  Save, close nano
  sudo update-grub
  sudo reboot ## i blacklisted the other drivers before rebooting

  at log in prompt drop to a shell again,stop the mdm and:
  sudo nano /etc/modprobe.d/blacklist.conf
  add to the end:
  blacklist amd76x_edac
  blacklist vga16fb
  blacklist nouveau
  blacklist rivafb
  blacklist NVidiafb
  blacklist rivatv
  save and quit nano
   if you had previous nvidia drivers: ## i didn't
  sudo apt-get remove --purge NVidia*

  install driver:
  sudo sh NVIDIA-Linux-x64-319.37.run
  registered with DKMS
  NO to 32 bit libs ## if you want 32bit support,
   ## you'll need to do some shennanigans with xsi to
   ## stop it segfaulting (see below)
  yes to run the xconfig util ## always failed for me but they still went
 in fine every time - permissions ??
  it once asked me to remove nouveau - it failed. did it above anyway

  Reboot and you should be good to go.


 http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
 !!! pts 5  7 !!!
 libGL.so -- this puppy is the cause of most startup segfaults, xsi
 typically can't find it

  cuda would only install from cmd shell with mdm stopped.

  samples went in without issue every time (from desktop even)

  i used ~/.bashrc to export required paths:
  export PATH=$PATH:/usr/local/cuda-5.5/bin
  export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



  XSI PRE-INSTALL NOTES:
 deps: tcsh, alien lsb gamin ## i didn't make a note of these but you'll
 know instantly if you don't have the right dependencies for install
 extra downloads:
  ##the adlm that comes with 2014 sp2 will not install for me no matter
 what i do
  http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
  tar xzvf nlm11.11_ipv4_linux64.tar.gz
  use alien on the rpms
  sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts and
 install (dkpg -i)


  the setup script references /usr/lib64, doesn't exist on mint so -

  ln -s /usr/lib /usr/lib64   ## or change the setup script

  mental ray:
  sudo mkdir /usr/tmp/
  sudo chmod a+wr /usr/tmp/
  ## or simlink to /tmp, up to you

  make sure _setup has the right permissions (note the underscore) (chmod
 +x )
  tcsh
  sudo sh setup
 i used network for my server type but this:

 http://wikihelp.autodesk.com

Re: Linux: 2014 sp2 install notes and stuff

[Jon Swindells]

@Thomas: if you are getting errors (of the type: *** Error in
`/usr/Softimage/Softimage_2014_SP2/Application/bin/XSI.bin': free():
invalid size: 0x0b0d3f90 ***
) then you need to give xsi the correct folder permissions


On 29 September 2013 12:35, Jon Swindells squi...@gmail.com wrote:

 I can't honestly disagree with you Mirko.

 It's only really in regards to xsi though. maya*, modo, houdini, nuke,
 mari, blender and others are all vastly better on linux it's not even funny


 *not if you want vp2.0 though


 On 29 September 2013 12:21, Mirko Jankovic mirkoj.anima...@gmail.comwrote:

 Honestly I still think that it is cheaper, faster and nerve saving to
 actually get windows and install without problems, then to have to hire
 Linux pro just to install software and then try to keep it working without
 problems :)


 On Sun, Sep 29, 2013 at 9:51 AM, Thomas Volkmann 
 li...@thomasvolkmann.com wrote:

  Congratulations! You will be nominated for this years life-achievement
 award!
 Can you save scenes and reopen them?

 cheers,
 thomas




 On 09/29/2013 06:32 AM, Jon Swindells wrote:

 just some notes from the past week or so on getting 2014 installed and
 working
 well in Mint 15 Cinnamon.

  Most of this info, if not all, is available on the webs (most of it on
 Stephen's blog) but, as i used
 the list extensively when looking for answers, i though this would be
 the appropriate place for my notes.

  ##
  NOTES:
 update everything BEFORE proprietry driver: // wasn't obvious to my
 win-centric mindset
  sudo apt-get update  sudo apt-get upgrade  sudo apt-get
 dist-upgrade
  //reboot into new kernel if tehre is one
  // headers
  sudo apt-get install -y linux-headers-$(uname -r)

  i needed cuda but if you don't, go with the os nvidia drivers.
 xsi/maya worked best with 310's for me, later drivers gave me segfaults
 in xsi - quite
 possibly due to conflicting ogl linkage.

    CUDA  
 only needed for cuda dev (ie, you only need this install if you plan on
 compiling your own cuda apps)

  https://developer.nvidia.com/cuda-downloads
 i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i think
 the deb package would be easier
 all round. ah well. live and learn

  the installer always crapped out if i didn't split/unpack it:
  sh cuda*.run -extract=/path/to/extract/dir/

  drivers : NVIDIA-Linux-x86_64-319.37
 cuda : cuda-linux64-rel-5.5.22-16488124
 samples : cuda-samples-linux-5.5.22-16488124
 !!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to
 build or altenate 4.6!!!

  //install Driver, cuda then samples

  drop to a cmd shell (ctr+alt + F2)
  stop x server:
  sudo service mdm stop ##cinnamon/mate
  ## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
  sudo nano /etc/default/grub
  add or change GRUB_CMDLINE_LINUX_DEFAULT :
  GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
  Save, close nano
  sudo update-grub
  sudo reboot ## i blacklisted the other drivers before rebooting

  at log in prompt drop to a shell again,stop the mdm and:
  sudo nano /etc/modprobe.d/blacklist.conf
  add to the end:
  blacklist amd76x_edac
  blacklist vga16fb
  blacklist nouveau
  blacklist rivafb
  blacklist NVidiafb
  blacklist rivatv
  save and quit nano
   if you had previous nvidia drivers: ## i didn't
  sudo apt-get remove --purge NVidia*

  install driver:
  sudo sh NVIDIA-Linux-x64-319.37.run
  registered with DKMS
  NO to 32 bit libs ## if you want 32bit support,
   ## you'll need to do some shennanigans with xsi to
   ## stop it segfaulting (see below)
  yes to run the xconfig util ## always failed for me but they still
 went in fine every time - permissions ??
  it once asked me to remove nouveau - it failed. did it above anyway

  Reboot and you should be good to go.


 http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
 !!! pts 5  7 !!!
 libGL.so -- this puppy is the cause of most startup segfaults, xsi
 typically can't find it

  cuda would only install from cmd shell with mdm stopped.

  samples went in without issue every time (from desktop even)

  i used ~/.bashrc to export required paths:
  export PATH=$PATH:/usr/local/cuda-5.5/bin
  export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



  XSI PRE-INSTALL NOTES:
 deps: tcsh, alien lsb gamin ## i didn't make a note of these but you'll
 know instantly if you don't have the right dependencies for install
 extra downloads:
  ##the adlm that comes with 2014 sp2 will not install for me no matter
 what i do
  http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
  tar xzvf nlm11.11_ipv4_linux64.tar.gz
  use alien on the rpms
  sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts
 and install (dkpg -i)


  the setup script references /usr/lib64, doesn't exist on mint so -

  ln -s /usr/lib /usr/lib64   ## or change the setup

Linux: 2014 sp2 install notes and stuff

[Jon Swindells]

just some notes from the past week or so on getting 2014 installed and
working
well in Mint 15 Cinnamon.

Most of this info, if not all, is available on the webs (most of it on
Stephen's blog) but, as i used
the list extensively when looking for answers, i though this would be the
appropriate place for my notes.

##
NOTES:
update everything BEFORE proprietry driver: // wasn't obvious to my
win-centric mindset
sudo apt-get update  sudo apt-get upgrade  sudo apt-get dist-upgrade
//reboot into new kernel if tehre is one
// headers
sudo apt-get install -y linux-headers-$(uname -r)

i needed cuda but if you don't, go with the os nvidia drivers.
xsi/maya worked best with 310's for me, later drivers gave me segfaults in
xsi - quite
possibly due to conflicting ogl linkage.

  CUDA  
only needed for cuda dev (ie, you only need this install if you plan on
compiling your own cuda apps)

https://developer.nvidia.com/cuda-downloads
i used the 5.5 ubuntu 12.10 .run version. now i know a bit more, i think
the deb package would be easier
all round. ah well. live and learn

the installer always crapped out if i didn't split/unpack it:
sh cuda*.run -extract=/path/to/extract/dir/

drivers : NVIDIA-Linux-x86_64-319.37
cuda : cuda-linux64-rel-5.5.22-16488124
samples : cuda-samples-linux-5.5.22-16488124
!!! 5.5 toolkit installs and compiles fine with gcc 4.7. no need to build
or altenate 4.6!!!

//install Driver, cuda then samples

drop to a cmd shell (ctr+alt + F2)
stop x server:
sudo service mdm stop ##cinnamon/mate
## obviously ## sudo cp /etc/default/grub /etc/default/grub__bak
sudo nano /etc/default/grub
add or change GRUB_CMDLINE_LINUX_DEFAULT :
GRUB_CMDLINE_LINUX_DEFAULT=quiet nouveau.modeset=0
Save, close nano
sudo update-grub
sudo reboot ## i blacklisted the other drivers before rebooting

at log in prompt drop to a shell again,stop the mdm and:
sudo nano /etc/modprobe.d/blacklist.conf
add to the end:
blacklist amd76x_edac
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist NVidiafb
blacklist rivatv
save and quit nano
 if you had previous nvidia drivers: ## i didn't
sudo apt-get remove --purge NVidia*

install driver:
sudo sh NVIDIA-Linux-x64-319.37.run
registered with DKMS
NO to 32 bit libs ## if you want 32bit support,
  ## you'll need to do some shennanigans with xsi to
  ## stop it segfaulting (see below)
yes to run the xconfig util ## always failed for me but they still went in
fine every time - permissions ??
it once asked me to remove nouveau - it failed. did it above anyway

Reboot and you should be good to go.

http://docs.nvidia.com/cuda/cuda-getting-started-guide-for-linux/index.html#runfile-installation
!!! pts 5  7 !!!
libGL.so -- this puppy is the cause of most startup segfaults, xsi
typically can't find it

cuda would only install from cmd shell with mdm stopped.

samples went in without issue every time (from desktop even)

i used ~/.bashrc to export required paths:
export PATH=$PATH:/usr/local/cuda-5.5/bin
export LD_LIBRARY_PATH=/usr/local/cuda-5.5/lib64:/lib:$LD_LIBRARY_PATH



XSI PRE-INSTALL NOTES:
deps: tcsh, alien lsb gamin ## i didn't make a note of these but you'll
know instantly if you don't have the right dependencies for install
extra downloads:
 ##the adlm that comes with 2014 sp2 will not install for me no matter what
i do
http://images.autodesk.com/adsk/files/nlm11.11_ipv4_linux64.tar.gz
tar xzvf nlm11.11_ipv4_linux64.tar.gz
use alien on the rpms
sudo alien -ci rpmsFrom_nlm11.11_ipv4_linux64  ## include scripts and
install (dkpg -i)


the setup script references /usr/lib64, doesn't exist on mint so -

ln -s /usr/lib /usr/lib64   ## or change the setup script

mental ray:
sudo mkdir /usr/tmp/
sudo chmod a+wr /usr/tmp/
## or simlink to /tmp, up to you

make sure _setup has the right permissions (note the underscore) (chmod +x )
tcsh
sudo sh setup
i used network for my server type but this:
http://wikihelp.autodesk.com/Installation_Help/enu/2014/Help/0161-Product_161/0538-Softimag538/0539-Softimag539/0540-Softimag540/0541-Installi541
leads me to believe that you could probably use a standalone edu license in
2014 ala maya

setup usually goes ok but with errors:
Error: Application/bin/cmdreg -f Application/bin/XSICOMDLLs.lst
Error: Registering python
the rpm errors can be ignored if you set it up previously.

you'll need to register the stuff the installer missed: (from SB's blog)
tcsh
source /usr/Softimage/Softimage_2014_SP2/.xsi_2014_SP2
cd /usr/Softimage/Softimage_2014_SP2/Application/bin/
cmdreg libdsprsr.so
ldd for any missing libs and install them
 register com dlls
tcsh
cd /usr/Softimage/Softimage_2014_SP2/Application/bin/
cmdreg -f XSICOMDLLs.lst

register python
mwpython win32com/axscript/client/pyscript.py

Deleting the X11 folder (and all it's contents) gets rid of the main
segfault problem
/usr/Softimage/Softimage_2014_SP2/Application/mainwin/mw/lib-amd64_linux/X11

run xsi

Re: Softimage 2014 SP2 sketch curve bug

[Stephen Blair]

Well, it's repro in a CentOS 6.2 VM

Too bad there's no sketch command logged, otherwise I'd try running it 
with the viewports hidden/muted


On 26/09/2013 9:31 PM, Chris Chia wrote:

Find the repro steps and submit a bug report. Softimage QAs will verify.

Chris

On 27 Sep, 2013, at 6:13 AM, Rob Chapman tekano@gmail.com 
mailto:tekano@gmail.com wrote:


dont think its the preferences folder. we tried it on 4 separate 
workstations, but of course will give it a go. but I have no choice 
on the centos 6.2 install either - it was recently updated from 5.x 
and was the same bug there as well I think - will check



On 26 September 2013 22:58, Chris Chia softimage...@gmail.com 
mailto:softimage...@gmail.com wrote:


Try purging the preference folder. Might be corrupted.

Chris

On 27 Sep, 2013, at 3:12 AM, Rob Chapman tekano@gmail.com
mailto:tekano@gmail.com wrote:


thats good to know, thanks Alan!


On 26 September 2013 20:00, Alan Fregtman
alan.fregt...@gmail.com mailto:alan.fregt...@gmail.com wrote:

I think it's something with your setup.

On CentOS 6.3 here. Sketched 20 curves and gave up. No crashes.



On Thu, Sep 26, 2013 at 5:23 AM, Rob Chapman
tekano@gmail.com mailto:tekano@gmail.com wrote:

Centos 6.2

CreateCurveSketch curve

2nd or 3rd curve drawn

Softimage disappears with segmentation fault.

we are having to open Maya to sketch curves?  :(




--
To unsubscribe: mail
softimage-requ...@listproc.autodesk.com
mailto:softimage-requ...@listproc.autodesk.com with
subject unsubscribe and reply to the confirmation email.



--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com
mailto:softimage-requ...@listproc.autodesk.com with
subject unsubscribe and reply to the confirmation email.


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com
mailto:softimage-requ...@listproc.autodesk.com with subject
unsubscribe and reply to the confirmation email.


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com
mailto:softimage-requ...@listproc.autodesk.com with subject
unsubscribe and reply to the confirmation email.


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com 
mailto:softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.



--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.

Re: Softimage 2014 SP2 sketch curve bug

[Rob Chapman]

and tried it (sketch curves) on centos 6.4, its rock solid .  great!

but trying to manipulate one of the nbSubCurves  from a merged curve with a
simple ICE compound is  EXTREMELY flakey and getting  segmentation faults
per minute. even in centos 6.4






On 27 September 2013 11:31, Stephen Blair stephenrbl...@gmail.com wrote:

  Well, it's repro in a CentOS 6.2 VM

 Too bad there's no sketch command logged, otherwise I'd try running it
 with the viewports hidden/muted


 On 26/09/2013 9:31 PM, Chris Chia wrote:

 Find the repro steps and submit a bug report. Softimage QAs will verify.

 Chris

 On 27 Sep, 2013, at 6:13 AM, Rob Chapman tekano@gmail.com wrote:

   dont think its the preferences folder. we tried it on 4 separate
 workstations, but of course will give it a go. but I have no choice on the
 centos 6.2 install either - it was recently updated from 5.x and was the
 same bug there as well I think - will check


 On 26 September 2013 22:58, Chris Chia softimage...@gmail.com wrote:

  Try purging the preference folder. Might be corrupted.

  Chris

 On 27 Sep, 2013, at 3:12 AM, Rob Chapman tekano@gmail.com wrote:

   thats good to know, thanks Alan!


 On 26 September 2013 20:00, Alan Fregtman alan.fregt...@gmail.comwrote:

 I think it's something with your setup.

 On CentOS 6.3 here. Sketched 20 curves and gave up. No crashes.



  On Thu, Sep 26, 2013 at 5:23 AM, Rob Chapman tekano@gmail.comwrote:

Centos 6.2

  CreateCurveSketch curve

  2nd or 3rd curve drawn

  Softimage disappears with segmentation fault.

  we are having to open Maya to sketch curves?  :(




  --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


   --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


   --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject
 unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
 unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject
 unsubscribe and reply to the confirmation email.

--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.

Re: Softimage 2014 SP2 sketch curve bug

[Rob Chapman]

further exploration looking for guaranteed repro , it seems applying my
compound directly after a merge curve (from a script because it cannot be
done in soft or ICE) causes the segmentation. but if I create an empty ICE
tree to the merged curve, freeze, then apply my compound then it works fine.

so the nsubcurves can only be manipulated if they are dirty?

also, just before the segmentation happens - I can tell it is going to
happen because the subcurves all report as 0 - if I do anything else then
it crashes.

but if I save and reload the scene just before then it fixes the problem
and all subcurves report correctly and no segmentation happens.

so I think for a workaround we can do some jiggle in the mergecurves script
to dirty up the curves.




On 27 September 2013 11:43, Rob Chapman tekano@gmail.com wrote:

 and tried it (sketch curves) on centos 6.4, its rock solid .  great!

 but trying to manipulate one of the nbSubCurves  from a merged curve with
 a simple ICE compound is  EXTREMELY flakey and getting  segmentation faults
 per minute. even in centos 6.4






 On 27 September 2013 11:31, Stephen Blair stephenrbl...@gmail.com wrote:

  Well, it's repro in a CentOS 6.2 VM

 Too bad there's no sketch command logged, otherwise I'd try running it
 with the viewports hidden/muted


 On 26/09/2013 9:31 PM, Chris Chia wrote:

 Find the repro steps and submit a bug report. Softimage QAs will verify.

 Chris

 On 27 Sep, 2013, at 6:13 AM, Rob Chapman tekano@gmail.com wrote:

   dont think its the preferences folder. we tried it on 4 separate
 workstations, but of course will give it a go. but I have no choice on the
 centos 6.2 install either - it was recently updated from 5.x and was the
 same bug there as well I think - will check


 On 26 September 2013 22:58, Chris Chia softimage...@gmail.com wrote:

  Try purging the preference folder. Might be corrupted.

  Chris

 On 27 Sep, 2013, at 3:12 AM, Rob Chapman tekano@gmail.com wrote:

   thats good to know, thanks Alan!


 On 26 September 2013 20:00, Alan Fregtman alan.fregt...@gmail.comwrote:

 I think it's something with your setup.

 On CentOS 6.3 here. Sketched 20 curves and gave up. No crashes.



  On Thu, Sep 26, 2013 at 5:23 AM, Rob Chapman tekano@gmail.comwrote:

Centos 6.2

  CreateCurveSketch curve

  2nd or 3rd curve drawn

  Softimage disappears with segmentation fault.

  we are having to open Maya to sketch curves?  :(




  --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


   --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.


   --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
 unsubscribe and reply to the confirmation email.



 --
 To unsubscribe: mail softimage-requ...@listproc.autodesk.com with
 subject unsubscribe and reply to the confirmation email.



--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.

Softimage 2014 SP2 and custom ICE node crash

[Guillaume Laforge]

Hi guys,

I compiled a custom ICE node for 2014 SP2 and it crash all the time (It
works perfectly in 2013 QF7).
As this node is rather complicated and call external libraries, it is not
easy to send it to support (and I don't have the time right now to isolate
the problem in a simpler code).
Because of that we are staying in 2013 for the production.

I'm wondering if other users got similar issue with custom ICE node in SP2 ?

Thanks,

Guillaume Laforge
--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.

Re: Softimage 2014 SP2 and custom ICE node crash

[Stephen Blair]

Maybe you should try compiling against SP1 and see if that crashes too.
In SP2, wasn't there just that one SDK change for ICE array access, 
which broke binary compatibility?


On 27/09/2013 10:37 AM, Guillaume Laforge wrote:

Hi guys,

I compiled a custom ICE node for 2014 SP2 and it crash all the time 
(It works perfectly in 2013 QF7).
As this node is rather complicated and call external libraries, it is 
not easy to send it to support (and I don't have the time right now to 
isolate the problem in a simpler code).

Because of that we are staying in 2013 for the production.

I'm wondering if other users got similar issue with custom ICE node in 
SP2 ?


Thanks,

Guillaume Laforge


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.


--
To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject 
unsubscribe and reply to the confirmation email.