[AFMUG] EPMP Force 200, Buy only the Radio

We're getting enough F200 radios in the air now that we are starting to have some failures, mostly storm related. We just change the radio unit, since alignment is all done. So I'm ending up with all these F200 dish parts sitting on the shelf that have no use. Is anyone selling just the

Re: [AFMUG] Looking for a new Truck/field Laptop

of their tower. On Mon, May 21, 2018, 8:38 AM Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote: The Netbook I've been using for a the last couple years bit the dust on an install last week. Acer Aspire E11. It was working fine one minute, then the Ethe

[AFMUG] Looking for a new Truck/field Laptop

The Netbook I've been using for a the last couple years bit the dust on an install last week. Acer Aspire E11. It was working fine one minute, then the Ethernet adapter was not detected by windows anymore. Of course now-a-days nothing comes with a built in Ethernet adapter, I'd really hate

[AFMUG] New 450 Failure state

Just ran into this scenario this morning. It's a new one to me. 450 5ghz SM. The Radio thinks it has a default plug inserted. This is what we've all seen before, here's the new part - if you power it down for 5 minutes, then it will then boot up normally. Any powercycle shorter than that,

Re: [AFMUG] Sealed AGM Batteries and Water

essage -- From: ch...@wbmfg.com To: "Animal Farm" <af@afmug.com> Sent: 5/2/2018 10:39:44 AM Subject: Re: [AFMUG] Sealed AGM Batteries and Water Their vent valves are one way check valves so it is probably just fine. -Original Message- From: Nate Burke Sent: Wednesday, May 2

[AFMUG] Sealed AGM Batteries and Water

I had an equipment box that got completely submerged due to a water main break. All the equipment like routers and UPS are toast, but would the 100+ AH AGM Batteries still be good? I haven't had a chance to put a voltmeter or anything on them yet, but could they be 'trusted' since they were

[AFMUG] Cradlepoint Devices or multi-cell Hotspot

So the boss is getting ready to take a road trip, It's vital important that he remain continually connected (his words), I believe what he meant to say is, 'I want to watch netflix every night at the campground'. We have Verizon, but it doesn't work everywhere, I was in a campground in

Re: [AFMUG] OT: very OT. Scumbag parents

I thought I heard somewhere that any use of Meth, even once, permanently alters the brain chemistry. So it's not a 'recreational' drug, and why it's so addictive. On 4/17/2018 2:11 PM, Jay Weekley wrote: Anything that makes me not want to eat or sleep isn't for me. I like those too much.

[AFMUG] OT: IM Services

With the demise of AIM, and not being on any social media sites, what's available for Instant messaging apps these days? Basically so I can send the boss Hyperlinks without having to do everything through email while we're on an intercom call.It looks like Trillian.im offers a service

[AFMUG] IPhones and 2/5ghz WIFI

I'm trying to track down an issue at one of my customers. Some Iphones are having a hard time connecting to Xclaim APs. When I look at the connected client list, it shows the IPhones connected to both the 2ghz and 5ghz RF on the AP with the same client MAC address, very good signal levels on

Re: [AFMUG] Spectrum fiber demarc move

Put it back thew way it was and say you don't know why it stopped working. On 3/30/2018 9:44 AM, Kurt Fankhauser wrote: I probably could that would be interesting if i called tech support and said i tried moving the fiber now it dont work. On Sun, Mar 25, 2018 at 5:17 PM, Chris Fabien

Re: [AFMUG] A Stupid coax question

t;<https://twitter.com/mdwestix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ---- *Fr

[AFMUG] A Stupid coax question

Comcast has been deploying their WIFI hotspot network like mad in the Chicago metro. Every public park, gas station, strip mall, hotel, and train station seems to have a wifi AP hung outside of it now. These units just hang on their aerial coax cable, and get their power and data just off a

Re: [AFMUG] OT: Buttset recommendations

I've been happy with my Monoprice one. On 3/27/2018 11:22 AM, Jay Weekley wrote: I need a new buttset and am looking for recommendations. It doesn't have to be top of the line and my last used Ebay unit failed me at a very inopportune time so I'm looking for something new though not

[AFMUG] Does anyone Service the Greater Wilmington, NC area?

A radio station engineer we've worked with for years is moving somewhere around Wilmington, NC and was wondering what his WISP options are for his house (which is not located yet), but most likely will be rural probably 20-30 min away from Wilmington. This appears to be a somewhat mountainous

Re: [AFMUG] grr - installing

Ok, I must be late to the party, what's the deal with silicone caulk? Like RTV silicone? What do you use instead, and why don't you like it. On 3/9/2018 10:28 AM, Steve Jones wrote: caulk, the devils chowder On Fri, Mar 9, 2018 at 10:19 AM, Chuck McCown

Re: [AFMUG] WispAmerica AF11x to Remec adapter

Price, and how do we order them? Are those Customer Jumpers, or N to N? What are the weatherproofing options? On 3/6/2018 9:52 AM, Chuck McCown wrote: Booth was extra hard to set up our display.

Re: [AFMUG] OT google file stream

I have not changed to file stream, but I'm reading this as it will only go on the C: drive and you can't change it. So if you have a small C drive, or are almost out of space, you're SOL. On 3/1/2018 5:51 PM, Mike Hammett wrote: Everything I have I sync. All copies on all devices (including

Re: [AFMUG] UPS

second (the fluorescent lights in the building were acting like strobes) The UPS didn't seem to care, and none of the equipment rebooted. On 2/21/2018 12:30 PM, Chuck McCown wrote: Do they do a hit-less transfer? -Original Message- From: Nate Burke Sent: Wednesday, February 21, 2018

Re: [AFMUG] UPS

I've been very happy with APC SmartUPS 750XL units. Hook up as much or as little battery as you want. Internal 18AH or multiple 100+AH (in 24V strings) Haven't had a failure other than from an external source (Water, Mice) through multiple Chicago winters/summers. I know it's not as

Re: [AFMUG] Email Server

"I just sent an email to my girlfriend with dinner reservations for tonight, but now I want to break up with her, can you delete the email that I sent her?" "3 years ago I bought a widget, and now I want to buy it again, but I can't find it in my inbox, can you find it for me?" "I just

Re: [AFMUG] Email Server

It's expensive (now) but Icewarp mail server has just worked for us for like 15 years. On 2/20/2018 10:34 AM, Matt wrote: For those of you still providing your users with an email account what platforms are you using?

[AFMUG] In Mikrotik is a MHZ a MHZ?

When comparing Mikrotik capability, is a MHZ a MHZ. I.E. For a single CPU application, like a bandwidth test or Interface bridging. Will a x86 CPU at 1000mhz perform the same as a CCR CPU at 1000mhz? I have some older ATOM based routers that are 2 core hyperthreaded at 1.6 ghz. I'm trying

Re: [AFMUG] .........Fw: [Motorola] I QUIT - This should be on the Trango List

Maybe that was the difference, They said it had a bad OMU, but the ODU was fine. $3450 to replace it, I declined. On 2/14/2018 9:55 AM, Jeremy wrote: My radios are Remecand Laurie says she can no longer get any Remec heads, even at MSRP. On Wed, Feb 14, 2018 at 8:53 AM, Nate Burke &l

Re: [AFMUG] .........Fw: [Motorola] I QUIT - This should be on the Trango List

They must still have a stockpile of equipment somewhere. I just sent an Apex Plus radio in for repair a couple weeks ago. They said they couldn't repair it, but offered me the option to buy a new one at full MSRP. But yes, almost everyone is gone from Trango. The person I was initially

Re: [AFMUG] New Server Hardware

egally protected from disclosure. >> If you are not the intended recipient of this message or their agent, >> or if this message has been addressed to you in error, please >> immediately alert the sender by reply email and then delete this >> message and any atta

Re: [AFMUG] OT Porn ..... (filtering)

"I just have to check on the kids all the time or be in the same room (four 8 – 18 yr old boys, lol!)" Whenever I'm ask how to keep kids from goofing off on the computer, my response is always the same. Put the Computer(s) in the most high traffic room of the house, facing into the room.

[AFMUG] New Server Hardware

I'm going to need to bring online a couple new servers (OS Instances) in the next month or 2. They could probably be housed inside a single physical machine as VM's. It's been a while since I've had to pickup new server hardware. What's a good spec now for a machine to do VM's. Are NAS

Re: [AFMUG] blocking

If the ISP Is required to run it's own filtering, without a 3rd party, also be prepared for the increase of staff and their counseling needs. I was just trying to find it, but my Googleskillz are failing me presently. I remember reading an article where it was talking about a content

Re: [AFMUG] blocking

If a minor gets an XBox gift card, are you in charge of making sure they don't use it to download Grand Theft Auto? It would be Adult content coming through your connection. What about any game with an Online chat function, scrub and block those as well. On 2/6/2018 10:18 AM, Seth Mattinen

Re: [AFMUG] USB over IP

I ordered a Wintel box, and a 12v to USB adapter. We'll see how well they work. I'm hoping the Wifi Will reach out there, and I won't have to run a Cat5. On 2/1/2018 10:25 AM, Mark - Myakka Technologies wrote: Nate, How about a wintel device. I have one here at the office that runs the

Re: [AFMUG] USB over IP

Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net - Original Message - From: "Nate Burke" <n...@blastcomm.com> To: "Animal Farm" <af@afmug.com> Sent: Thursday, February 1, 2018 10:22:16 AM Subject: [AFMUG] US

[AFMUG] USB over IP

I have a generator control board that is interfaced via USB, it sits about 50' away from the building. The generator has been acting up on me, failing it's exercise cycle about every 4 attempts, and there is not an LCD troubleshooting display to see what went wrong. Plugging in via USB give

[AFMUG] OT: Google Earth images

Looks like Google finally turned off Panoramio. I really liked how you could see photos from all over the world, and as you zoomed out, it would neatly compress them into a multi-view window. I virtually visited many places across the globe this way. Now it's been replaced with 'Google Maps

Re: [AFMUG] Colo on Verizon owned Tower

Years ago, back when cell towers were still a novelty item, we worked with a municipality where they forced the cellco to massively oversize the tower, which was located on city property, so the city could do with it what they wanted. I think they allowed the tower to be put up, so they got

Re: [AFMUG] CCR1032 to CRS125 Fiber

032 to CRS125 Fiber I've had to set the CCR to 1Gbps FDX (not auto negotiate) in the past to get a link to come up. Worth a try if you haven't changed that setting as of yet. On Thursday, January 11, 2018, Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote:

Re: [AFMUG] PC Out of Band management

This sounds like a goofy use case. Maybe a raspberry pi with a usb NIC? What are you needing this for? On Mon, Jan 15, 2018 at 9:11 AM, Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote: > I'm looking to put a PC at a site, but I want true

[AFMUG] PC Out of Band management

I'm looking to put a PC at a site, but I want true out of Band management for it, I.E. Be able to turn off the Ethernet Interfaces or Change IP Addresses without dropping management connectivity. I'm used to working with the Supermicro motherboards built in IPMI Functionality, which is

Re: [AFMUG] Speedtest.net Application Errors

to .PHP, so their system doesn't realize I'm ready to go live yet. Maybe in another week I'll have a response to that ticket. On 1/6/2018 2:15 PM, Steve Jones wrote: does nanog list have an ookla people eater lurking? On Sat, Jan 6, 2018 at 1:08 PM, Nate Burke <n...@blastcomm.com <ma

[AFMUG] CCR1032 to CRS125 Fiber

I tried to move a Multimode 1g fiber that was running on a RB260GS to a CCR1032 8G-2S+. I moved the mikrotik branded SFP from the 260 to the CCR, so I know the SFP is good. The SFP was recognized, and the phy link was reporting up, but I had no RX traffic. The remote end of the fiber is on

[AFMUG] Speedtest.net Application Errors

My speedtest.net testing box bit the dust, and I'm having trouble getting it rebuilt. Everything is testing perfect on http://www.ookla.com/hosttester.php except for the Oolkaserver Daemon HTTPS test. It fails test #4 "Response: , Error: Unknown SSL protocol error in connection to

Re: [AFMUG] battery

I was just at one of the Autoparts stores, they had a series of battery that was 1/2 the cost of the next closest, it had a 2 month warranty. I figured that's about as long as it would last. They probably test the old cores, one's that would hold any charge they clean up and slap a new label

Re: [AFMUG] Office Wire labeling

Sharpie works but is difficult to do well and rubs off. You could use strips of tape and sharpie to do a binary code. Tape, tape, sharpie, tape = 13 -Original Message- From: Nate Burke Sent: Thursday, December 28, 2017 8:06 AM To:

[AFMUG] Office Wire labeling

I'm getting ready to pull some Cat5 into an office space, about 40 drops. What's the best way to label the cables as they are pulled before they are dressed/punched. Printing a label for each cable that's going to get cut off as it's dressed into the patch panel seems wasteful. Colored tape

Re: [AFMUG] PMP100 No Customer MAC in Bridging Table?

Whenever I've seen similar situations, it's always Ethernet problems, bad cable/connector. Or a bad router. Rarely it's a bad SM. Are the Ethernet stats incrementing errors? On 12/28/2017 7:11 AM, Christopher Gray wrote: I have a customer who's PMP100 SM is not showing the customer MAC in

Re: [AFMUG] Computer Image backup/restore

It sounds like your biggest concern is a HD failure, or an unexpected software crash/update. A quick amazon search turns up hardware disk duplicators, where you just drop in 2 drives and it clones them. I would think something like that would accomplish what you are trying to go for. I

Re: [AFMUG] AF5x Failure Rate

radio die since I started using these things when they first came out. Can you describe your setup a bit better? Jim Sent via the Samsung Galaxy S7 active, an AT 4G LTE smartphone Original message From: Nate Burke <n...@blastcomm.com> Date: 12/17/17 11:19 AM (GMT-06:00)

[AFMUG] AF5x Failure Rate

I only have 3 AF5X links, But I've replaced 3 of the 6 radio units so far. They all have had RF problems where the link drops, but Ethernet and MGMT is just fine. I just had another radio go bad this weekend. I have a couple Dozen AF5 links in the air, and have had no problems with those.

[AFMUG] Dumb CLEC Question

If a CLEC is providing phone service over the ILEC Copper. Does the number exist at the CLEC, or the ILEC for porting purposes? I'm just trying to get a handle on porting time, AT ILEC in our area does number ports in about 3 days, It's been a while since I've done a CLEC port, but they

Re: [AFMUG] OT slightly political

Facebook and Google already have all the data of your likes/dislikes/beliefs (even one's you are not sure of). Seems like the next logical step would be a compatibility matrix. You are only allowed to interact with a potential date if you have >90% compatibility. Otherwise your advances

[AFMUG] Does unlimited mobile data decrease bandwidth usage

Since more Cell companies are switching to unlimited plans/streaming included, has that changed if people will actually bother to connect mobile devices to Wifi? I may be shooting myself in the foot, (maybe I should find some wood to knock on) but it seems like bandwidth usage has had a

Re: [AFMUG] Flexible Shielded Outdoor Cat-5

How flexible? We use the Belden 7919A, I can get it into a <6" loop without a problem. On 12/4/2017 8:49 AM, Matt wrote: Does anyone know of an shielded outdoor cat5e cable that is fairly flexible?

Re: [AFMUG] RAID controller eats disks?

I'm more impressed that you're actually getting a report predicting that the drive is failing. I have never ever had a raid controller report a disk may be failing. They just go straight from working to failed. Usually failing into a high latency state, where they still work, just really

Re: [AFMUG] What meter shows..

What is that thing on the right side of the picture with the electrostatic warning sticker? It looks like some sort of inflatable baffle on top? On 11/30/2017 7:40 AM, Jaime Solorza wrote: Jaime Solorza

Re: [AFMUG] ATA CallerID question

issue? Some PBXs were ground start. Not sure how that would affect caller ID. Is the PBX actually detecting the ringing? *From:* Nate Burke *Sent:* Monday, November 27, 2017 9:34 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] ATA CallerID question Just an Update, I put a splitter in the phone line

Re: [AFMUG] ATA CallerID question

then >the data. > >In any event, you can hear it if you have a butt sett with line monitor >mode. >Bell 202 is correct. > >-Original Message- From: Nate Burke >Sent: Tuesday, November 7, 2017

Re: [AFMUG] OT Tesla Thefts

Can't they just drive themselves back to the dealer? On 11/27/2017 9:52 AM, Chuck McCown wrote: I am sure they can phone home and be remotely disabled. *From:* Forrest Christian (List Account) *Sent:* Monday, November 27, 2017 1:28 AM *To:* af *Subject:* Re: [AFMUG] OT Tesla Thefts Aren't

Re: [AFMUG] ePMP puzzle

Does it happen with multiple machines/browsers? Maybe some stuck cache somewhere? On 11/27/2017 9:14 AM, Larry Smith wrote: Ok, have an ePMP 1000, updated from 3.1 to 3.3 then to 3.4 and problem persists. Issue is each time you login into the radio and go to configuration, network, a read

Re: [AFMUG] Layer3 TV

I forgot to actually list the URL https://layer3tv.com On 11/15/2017 10:28 PM, Nate Burke wrote: I was driving around today (Chicagoland) and saw a billboard for Layer3 TV. It looks like an OTT TV service, complete with Set-top boxes and DVR's all connected to your existing coax plant via

[AFMUG] Layer3 TV

I was driving around today (Chicagoland) and saw a billboard for Layer3 TV. It looks like an OTT TV service, complete with Set-top boxes and DVR's all connected to your existing coax plant via MOCA. Their website is quite light on technical details. Has anyone looked into them further? They

Re: [AFMUG] OT: Weird Amazon Package return

of Improv they did on the bus, of which only 2 minutes made it into the movie. On 11/14/2017 7:44 AM, Jay Weekley wrote: H. I loved Reno 911. I may be asking for that for Christmas. Nate Burke wrote: On Amazon, Reno 911 (one of my favorite shows), The Complete series, on DVD $17

Re: [AFMUG] OT: Weird Amazon Package return

kyneticwifi.com <mailto:j...@kyneticwifi.com>> wrote: I'm more amazed that in (almost) 2018 people are still buying DVDs. On Nov 13, 2017 8:59 AM, "Nate Burke" <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote:

[AFMUG] OT: Weird Amazon Package return

I ordered a DVD from Amazon that came cracked (Prime, shipped from Amazon), so I returned it and they sent me a new one. The UPS return label for the damaged disk had it being sent to a PO Box at the post office of a town of 1200 people in rural Illinois. When I checked the tracking info

[AFMUG] SOHO router QOS

I've been getting more and more calls lately where a game download is killing a customers connection. Especially with the P2P nature of game delivery now. Looking on the internet, it seems like the Netgear Nighthawk routers have QOS Built into them. Does it actually work to keep a single

Re: [AFMUG] ATA CallerID question

Original Message- From: Nate Burke Sent: Tuesday, November 7, 2017 1:58 PM To: Animal Farm Subject: [AFMUG] ATA CallerID question At a customer, I just hooked up a Cisco SPA122 into an Ancient Lucent PBX system. The customer says that caller ID is not coming

Re: [AFMUG] ATA CallerID question

It's the inbound caller ID (the customer is receiving a call), not the Outbound Caller ID. On 11/7/2017 3:16 PM, can...@believewireless.net wrote: The outbound CID should be set in the PBX, not the ATA. On Tue, Nov 7, 2017 at 3:58 PM, Nate Burke <n...@blastcomm.com <mailto:n...@blastco

[AFMUG] ATA CallerID question

At a customer, I just hooked up a Cisco SPA122 into an Ancient Lucent PBX system. The customer says that caller ID is not coming through, but it used to work with his old AT Lines, and it appears to be hitting the ATA Properly. Is there a setting on the ATA that needs to be set that older

[AFMUG] Cisco ATA Power supplies

I just ordered some SPA122 units and they showed up with Europe style prongs. Since it's just a small piece that snaps into the transformer block, does anyone know the part number for the US snap in module? The US Version comes in a bag labeled 74-4939-01, but Googling for that part number

[AFMUG] OT: Good Weather App/site

I've used Wunderground for years, but their recent updates have basically broken things. The Droid App no longer correctly displays the radar. It sometimes won't update, or only displays a few frames of animation, or only loads part of the radar overlay. On a PC, their site now takes 10-20

Re: [AFMUG] Stupid MikroTik SNMP

I haven't tried this method yet, I'll have to test it out. What I do is just set a Static 0.0.0.0/0 route with the gateway on each Backhaul with a different routing mark. firewall/mangle mark Connection, chain Input, UDP port 161, set In Interface of Backhaul Mark Routing, Chain Output, Check

Re: [AFMUG] Airfiber 24HD One Chain Bad?

Correction, it was only doing it for a week. On 10/6/2017 8:33 PM, Nate Burke wrote: I've had this happen on 3 or 4 AF24 (not HD) radios. One time you could physically hear something rattling around inside the radome. Another time, power cycle of the unit fixed it. This last time, I had

Re: [AFMUG] Airfiber 24HD One Chain Bad?

I've had this happen on 3 or 4 AF24 (not HD) radios. One time you could physically hear something rattling around inside the radome. Another time, power cycle of the unit fixed it. This last time, I had a radio do this for 3 weeks, then suddenly one day, it started working normally again

Re: [AFMUG] OT: Vacuum Cleaners

old) How does it do around like kitchen table chairs or area rugs on the hardwood? On 10/3/2017 12:26 PM, Chuck McCown wrote: We don’t seem to have those problems. *From:* Nate Burke *Sent:* Tuesday, October 03, 2017 11:03 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] OT: Vacuum Cleaners I had

Re: [AFMUG] OT: Vacuum Cleaners

glad I got mine :) On Tue, Oct 3, 2017 at 9:38 AM Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote: I'm in the market for a new Vacuum cleaner as my old one sucks, or doesn't, which is the problem. I could wade through thousands of amazon reviews, b

[AFMUG] OT: Vacuum Cleaners

I'm in the market for a new Vacuum cleaner as my old one sucks, or doesn't, which is the problem. I could wade through thousands of amazon reviews, but I thought I'd ask for a quick poll here. Floors are 50% split between carpet and hardwood. Occasionally we watch a dog, so pet hair pickup

Re: [AFMUG] ePMP Release 3.5

I haven't spent any time on the forums, or opened any tickets. But the one thing I've noticed from my little usage of 3.4 and 3.5 revolves around saving config changes. Click the save button, and radio will just to go 'applying' for several seconds, may or may not actually come back from

Re: [AFMUG] OT: google timeline

Must be some settings you have on. I have android, and just used Google maps today to go to 3 places, but my timeline is completely empty. On 9/18/2017 5:19 PM, Mike Hammett wrote: I use this all the time for my time tracking. - Mike Hammett Intelligent Computing Solutions

Re: [AFMUG] FM radio colocation interference?

Has anybody found differences in the Ethernet equipment used and errors? We have a site with a 4kw FM about 50' away from our gear. An FSK Cluster will not run at 100mb, only 10mb. A powerbridge at the same level sometimes negotiates down to 10mb, but mostly stays at 100mb. An EPMP radio

Re: [AFMUG] Small 5ghz antennas

footprint solution. if you find a clean way to weatherize the top of the 2000 AP with the connectorized that doesnt involve mastic please update On Thu, Sep 14, 2017 at 3:45 PM, Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com>> wrote: I'm looking to install an E

[AFMUG] Small 5ghz antennas

I'm looking to install an EPMP AP where the subs (force 180's) are only going to be about 100 yards away, and within a few degrees of each other. There is an existing mount already installed on the AP side, but it cannot handle something the size of a normal sector. There is a bare FSK AP

Re: [AFMUG] Ubnt AirFiber11

56mhz MIMO channel, Mikrotik Btest will return around 550mb/350mb sync, or around 550mb each way. Webpage reports ~730mb sync. Make sure you have flow control turned on. Makes a huge difference. Without it, was only running in the 200-300mb range. On 8/25/2017 4:04 PM, Matt wrote: Anyone

Re: [AFMUG] AF-11x

That is not the correct picture, that picture looks like an unlicensed AFx radio. On 8/15/2017 10:55 AM, Chuck McCown wrote: Does this photo show an AF-11X? I have a different product in my lab sent to me from UBNT.

Re: [AFMUG] AF-11x

You buy the radio which is the same hardware for all 11ghz, then the Diplexers for your licensed frequency, High or low. 1 Diplexer per end for a SISO link, 1 polarity. 2 Diplexers per end for a MIMO link, Dual Polarity. In the radio firmware you do not select different frequencies for the

[AFMUG] Mikrotik Hotspot pages

I have a site that is using Mikrotik Hotspot for a disclaimer/TOS page. It has been in place for years, and it hasn't been broke, so I haven't fixed it, (ROS v5.0rc3). The AP hardware has been upgraded, currently running ruckus XI-3 AP's. Recently I'm hearing from the site about once a week

Re: [AFMUG] Great portable propane generator

How do you weatherproof it, aren't the plugs just exposed on the side? On 8/3/2017 5:09 PM, Steve Jones wrote: http://www.genconnexdirect.net/honda_propane_modified_generators.htm On Thu, Aug 3, 2017 at 3:45 PM, Jim Bouse

[AFMUG] EPMP1000 GPS Antenna Issues

When we first started using EPMP, (5ghz, with GPS) we had some AP's would keep losing satellites. Then after our first couple installs, everything just Worked after that. Slap the GPS antenna on any random surface, and lots-o-satellites with no issues. Now the New AP's we're getting out of

Re: [AFMUG] OT Roomba

I have a much older model, I really liked it, but it was the exact height as the gap at the bottom of the couch, it kept getting itself stuck since it never ran into anything until it was wedged in place. And you still had to empty it when it was done, almost as easy to just get out the

Re: [AFMUG] EPMP AP shows different downling RSSI that the SM does

I don't think it's a value that's passed between the AP/SM, but Calculated at the AP based on distance and MSC Level, and probably some other things. So the Calc could be off. On 7/10/2017 11:39 AM, Steve Jones wrote: I haven't looked on other APs, just dealing with an issue. this is 3.2.2

[AFMUG] OT: Glossy magazines

I still get a couple actual paper magazines delivered through the mail to my house (No, not those kind of magazines). It seems that recently, every month at least one of them has several pages that are misprinted, where the colors don't quite line up making all the pictures on that page

Re: [AFMUG] 450AP POE polarity

That's what I thought. Monoprice Crossover blocks to the rescue. On 7/3/2017 1:52 PM, Jon Langeler wrote: Anything but standard canopy just won't work. Only 450i changed things Jon Langeler Michwave Technologies, Inc. On Jul 3, 2017, at 2:49 PM, Nate Burke <n...@blastcomm.com> wrote

Re: [AFMUG] Dumb Mikrotik question

What type of Mikrotik? I seem to remember in years gone by some issues with Mikrotik, Apple, and 802.11N, the solution was just to use B/G. Haven't run into anything recently though with 751/951 series. On 7/3/2017 2:03 PM, Jay Weekley wrote: So, we installed a Mikrotik router at a

[AFMUG] 450AP POE polarity

Can an original 450AP (from when they were still trying to get FSK interop working) only run with Standard Cambium POE pin-outs, or can they take reversed POE polarity as well? The Spec sheet doesn't say polarity, just voltage range, and it seems like a potentially expensive test.

Re: [AFMUG] Holding the epmp2000 sync cablein place

I just have it come out of the radio and magnet to the side of the lower mount. Haven't had any issues with EPMP2000 that way, and few issues with EPMP1000. Then just leave all the excess cable coiled up. On 6/30/2017 1:27 PM, Steve Jones wrote: It looks crummy and adds to assembly time to

Re: [AFMUG] OT..Hey Rory...we have a cold front

We can send you some of the marble size hail we just had in Chicago to cool you off On 6/19/2017 5:27 PM, Jaime Solorza wrote: Just heard from my brother who lives near Tucson, Phoenix is at 112...come on over here to El Paso..it's a cold 102lol...Friday we are hitting 107...I don't

Re: [AFMUG] EPMP 1000 GPS and POE+

Ok, that's what I thought, but I can't get them to come up at the POE+ setting. I'll do bench testing this afternoon. On 6/14/2017 11:33 AM, Josh Baird wrote: They are 802.3af compliant. We run all of ours at 48V. On Wed, Jun 14, 2017 at 11:46 AM, Nate Burke <n...@blastcomm.com <ma

[AFMUG] EPMP 1000 GPS and POE+

For some reason I thought I had tested this, but now it's not working. I thought that the EPMP 1000 GPS units (5ghz gigabit with Sync) will support up to 54V, and would Run POE+. I'm trying to power them off an Edgeswitch, and I can only get them to come up if I run them at 24v. At POE+, it

Re: [AFMUG] Advantage FSK Keys

Managing Director of Sales ConVergence Technologies Cell: +1 (303) 746-3590 dwh...@converge-tech.com -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke Sent: Tuesday, June 13, 2017 6:39 PM To: Animal Farm <af@afmug.com> Subject: [AFMUG] Advantage FSK Key

[AFMUG] Advantage FSK Keys

Can you upgrade a 5200 radio to a 5250 with a software key?

[AFMUG] Temperature and SFPs

I was just looking around at 10g SFP's, I saw that the MaxxWave brand list 0c-70c as operating temperature, and the Mikrotik and UBNT modules list no temperature range at all. Are SFP's really temperature dependent? I'm more worried about cold than heat. I had a couple edgepoints with 10g

Re: [AFMUG] ping

https://www.youtube.com/watch?v=jr0JaXfKj68 On 6/12/2017 9:05 AM, Jim Bouse [Brazos WiFi] wrote: Pong. Jim Bouse Owner Mobile IT Pro - Brazos WiFi 979-985-5912 j...@brazoswifi.com *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown *Sent:* Monday, June 12, 2017 9:05 AM

  1   2   3   4   5   6   7   >