rted when they’re talking to a 450 AP
> (Interoperability Mode only).
>
>
>
> The PMP 430 AP will not take R14.1.1.
>
>
>
> Matt
>
>
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie
> *Sent:* Tuesday, December 08, 2015 1:06 PM
&g
ar end the rx is -35V / -32H.
>
> Any idea what could cause a 10dB difference in polarizations?
>
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
are problems with cable distance on SyncInjectors prior to H1 (I
>>> beileve). Depending on your cable distance, you may or may not see an
>>> issue from what I understand.
>>>
>>> Josh
>>>
>>> On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <samta
After looking at some of the earlier posts, I can't really determine if I
can use the 450i AP on a gigabit syncinjector. It appears that it want a
48vdc power supply. What is the best way to set this up? Or will it
actually accept the 29 vdc power supply on the SyncInjector?
Sam
--
--
*Sam
450i 900 MHz
> will be at a tower where I already have a CTM-2 master + slave and if it
> works out it will be replacing a 900 FSK sector that is currently powered
> from the CTM-2.
>
> So I was kind of hijacking your thread.
>
> *From:* Sam Lambie <samtaos...@gmail.com&g
gt;> --
>> If you only see yourself as part of the team but you don't see your team
>> as part of yourself you have already failed as part of the team.
>>
>
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
9.5V Cambium, B is for 56V Cambium
> 320 and 430, and then there are 3 modes C/D/E for various forms of
> 802.3at. Should I assume one of these will power a 450i AP? What about
> timing, the documentation is not clear whether these modes can do sync.
>
>
> *From:* Sam Lambie <samt
ere are problems with cable distance on SyncInjectors prior to H1 (I
>> beileve). Depending on your cable distance, you may or may not see an
>> issue from what I understand.
>>
>> Josh
>>
>> On Thu, Dec 3, 2015 at 12:41 PM, Sam Lambie <samtaos...@gmail.com> wro
Forrest, do you have any input on the cable lengths?
On Thu, Dec 3, 2015 at 11:04 AM, Sam Lambie <samtaos...@gmail.com> wrote:
> I am at less than 100'
>
>
> On Thu, Dec 3, 2015 at 11:02 AM, Josh Luthman <j...@imaginenetworksllc.com
> > wrote:
>
>> If you h
will need to
> power it with 48V to power the 450i.
>
> There are problems with cable distance on SyncInjectors prior to H1 (I
> beileve). Depending on your cable distance, you may or may not see an
> issue from what I understand.
>
> Josh
>
> On Thu, Dec 3, 2015 at 12:41 PM, Sam
> works out it will be replacing a 900 FSK sector that is currently powered
> from the CTM-2.
>
> So I was kind of hijacking your thread.
>
> *From:* Sam Lambie <samtaos...@gmail.com>
> *Sent:* Thursday, December 03, 2015 12:08 PM
> *To:* af@afmug.com
> *Subject:*
ey never saw it?
>
> Thank you,
> Brett A Mansfield
>
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
nar?
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Oct 6, 2015 at 1:25 PM, Matt <matt.mailingli...@gmail.com> wrote:
>
> Anyone deployed any 450i AP's yet?
>
>
>
>
>
h motorolay its
> always been overly complicated and cumbersome. I hope the guy in charge of
> the guys in charge of entitlements gets shingles and crabs while he has the
> flue and his wife leaves him with some young buck with better hair
>
> On Thu, Nov 12, 2015 at 10:26 AM, Sam Lambi
let’s say 10 activations, the Cambium site
> will tell you how many you have used and how many are left. I don’t know
> of a way to store an unused entitlement on the site though.
>
> *From:* Sam Lambie <samtaos...@gmail.com>
> *Sent:* Thursday, November 12, 2015 10:19 AM
&
Is there a way to store the keys that I get from my vendor on the Cambium
site after activating? Or are we just expected to remember which keys still
are good in our inbox?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
Looking to deliver to 4 locations with 4 HD Cameras on each location. Need
probably about 25-35 mbps UPLOAD per location. This will be in a small
plaza in Taos NM
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
t; Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> On Oct 9, 2015 1:05 PM, "Sam Lambie" <samtaos...@gmail.com> wrote:
>
>> What I am most interested in though is SLA and more importantly, upload
>
TJ,
Do you still have these radios? I'll take 'em if you accept Credit Cards.
Thanks
Sam
On Fri, Oct 2, 2015 at 12:46 PM, TJ Trout <t...@voltbb.com> wrote:
> With power supply, all tested packed and ready to go, $800 shipped
>
> 10M
>
--
--
*Sam Lambie*
Taosnet Wire
ponsoring a repelling event for charity off a 12 story
> downtown building. I was talking to my brother about doing it when wife
> overheard. Guess I am not repelling off a historic building. Glad I have
> two ears as one is shot.
>
--
--
*Sam Lambie*
Taosnet Wireless Tech
a 4 inch 100vac fan to suck air out with an intake
port on the other side. But it would be nice if the fans could be
temperture controlled. Has anyone done this? And what have you used to make
it happen?
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <h
there will be some conduction it will be a lot less than the direct
>> radiation from the sun.
>>
>>
>>
>> Thank You,
>>
>> Brian Webster
>>
>> www.wirelessmapping.com
>>
>> www.Broadband-Mapping.com
>>
>>
>>
&g
I remember Sean Heskitt mentioning a while ago about the epmp GUI in its
early stages was hard for him to be able to tell the difference between
orange and green. Maybe he will chime in. Cambium listened to him and made
it much easier for people of less color to adapt.
gt;>> roll the affected AP's back to 13.2 this evening.
>>>>
>>>> Anyone else having Watchdog issues with the 13.4 release?
>>>>
>>>> **System Startup**
>>>> System Reset Exception -- Watchdog Reset
>>>> Software Version : CANOPY 13.4 AP-DES
>>>> Board Type : P12
>>>> Device Setting : 5.7GHz MIMO OFDM - Access Point - 0a-00-3e-a0-08-e5 -
>>>> 5760.0 MHz - 20.0 MHz - 1/16 - CC 85 - 2.5 ms
>>>> FPGA Version : 040715
>>>> FPGA Features : DES, Sched, US/ETSI;
>>>> 08/28/2015 : 14:11:42 CST : :Time Set
>>>> 08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port.
>>>>
>>>>
>>>>
>>>
>>
>>
>
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
Anyone have some they want to part with?
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
/ETSI;
08/28/2015 : 14:11:42 CST : :Time Set
08/28/2015 : 14:11:58 CST : Acquired sync pulse from Power Port.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Is this app still being supported? Or is there something better now?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Does it work with M series Nanostations?
How about regular old Nanostations?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Wireless, Inc.
(209)838-1221 x108
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie
*Sent:* Wednesday, July 29, 2015 7:57 AM
*To:* af@afmug.com
*Subject:* [AFMUG] FYI: 450 13.1.3 and 13.2 SM's Do Not work with 13.4
I banged my head against the wall for 2 days until someone
I banged my head against the wall for 2 days until someone suggested to
upgrade the SM firmware to 13.4
At 13.1.3 and 13.2, the Sm would momentarily register and then drop. I
thought it was a number of things... Grr
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
I have to use 10 of them for an upcoming project. Usually I make them my
self as they aren't in high demand. This is for Cambium or UBNT radios with
a dish and four cinderblocks.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
.
On 7/7/2015 4:04 PM, Matt wrote:
What is the SNMP command on 13.4 FSK AP to tell it to do a SA while
simultaneously having all SM's do one as well?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
.
Please contact
timothy.y...@mercury.net
Mercury Network Corporation
Midland MI
Tim
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
http://www.usatoday.com/story/tech/2015/06/30/california-internet-outage/29521335/
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Hey all,
I am looking for some SM's. 10 mbps is fine. Let me know if you have any to
let go.
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
10-15? Or for a good price, 25.
On Wed, Jul 1, 2015 at 1:27 PM, Gino Villarini ginovi...@gmail.com wrote:
how many?
On Wed, Jul 1, 2015 at 3:17 PM, Sam Lambie samtaos...@gmail.com wrote:
Hey all,
I am looking for some SM's. 10 mbps is fine. Let me know if you have any
to let go.
thanks
...@gmail.com
wrote:
yep...BTW..might be up North this weekend...if we are I will call you.
Join my wife and I for dinner and drinks ...
Jaime Solorza
Wireless Systems Architect
915-861-1390
On Mon, Jun 29, 2015 at 10:40 AM, Sam Lambie samtaos...@gmail.com
wrote:
Jaime,
I have
send you a little heat and we'll all be happy.
http://tinyurl.com/pol48qz
Randy Cosby
InfoWest, Inc.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Talk about a blast from the past. I was upgrading a ubiquiti and it appears
that we have an antenna IP conflict. I got a password prompt for 'Nova
Which I remember to be Etherants.
Anyone remember the password? I am not talking about Terabeam configurator
password BTW.
Sam
--
--
*Sam Lambie
...@linktechs.net – 314-735-0270 – www.linktechs.net
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie
*Sent:* Monday, June 08, 2015 4:33 PM
*To:* af@afmug.com
*Subject:* [AFMUG] Mikrotik BH antenna Options
Hey all,
I am installing 2 sets of Netmetal 5's as backhauls
that is smaller yet
keeps the beamwidth pretty tight.
Any suggestions for MIMO 5ghz?
I don't want to do Panels or Sectors as they will spew 5 ghz all over our
building full of 5ghz radios. Trying to keep the beam width tight, and
small...
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758
arm.
Erich Kaiser
North Central Tower
er...@northcentraltower.com
Office: 630-621-4804
Cell: 630-777-9291
On Mon, Jun 1, 2015 at 3:04 PM, Sam Lambie samtaos...@gmail.com wrote:
Hmm the tower idea is a not bad. I have a ROHN 25 sitting in the back. I
could make a sled for it. Would a 25
twisting on the mast?
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
thatoneguyst...@gmail.com wrote:
on our 4' dish we had planned on using angle iron vertically in one corner
of the tray with struts going down to the two corners left and right for
attaching the stabilizer if we needed it
On Mon, Jun 1, 2015 at 2:34 PM, Sam Lambie samtaos...@gmail.com wrote
I am wondering where I might find all the info that the FCC needs in order
to register my new 365 PTP link. Last time I did this, I nearly cried.
Thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Is it possible to do a spectrum scan with any brand of phone? I know one
can do a signal and channel scan with both Apple and Android.
Looking to get a new phone soon and looking for the most geeky one out
there.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http
not jumping out at me on the UBNT website.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Put that under your seat so your balls get a nice dose of sterilization!
On Tue, Apr 28, 2015 at 3:29 PM, Jaime Solorza losguyswirel...@gmail.com
wrote:
Worked well in a Ford 350 truck ..
Jaime Solorza
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http
What exactly is Phase 1 for Alignment tone? Alignment Tone, Phase 1 (Phase
2 will require a new FPGA)
On Fri, Apr 17, 2015 at 9:38 AM, Sam Lambie samtaos...@gmail.com wrote:
What about Audio alignment tone? Is that back yet? My installers will hate
me if I implement a new firmware that breaks
also adds a LOT of new features to the PMP 100 platform, so
try it out.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I have a LOT of 5.2 SM's for sale. Make me an offer on them. Low ball
offers will be considered!
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
this was in the 13.2 release for PMP4x0, but did it ever
make it into the PMP100?
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:32 AM, Matt Mangriotis wrote:
This software also adds a LOT of new features to the PMP 100 platform, so
try it out.
--
--
*Sam Lambie*
Taosnet Wireless Tech
I meant 802.3af or at. Jeez
On Thu, Apr 16, 2015 at 9:35 AM, Sam Lambie samtaos...@gmail.com wrote:
I can't find the POE specs anywhere for the UVC Cameras. Are they 802.11af
compliant? Or 802.11at?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http
I can't find the POE specs anywhere for the UVC Cameras. Are they 802.11af
compliant? Or 802.11at?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
you might be able to set up an 4
channel etherchannel and direct 2 over the 600 meg link and 1 on each of
the 300 meg links.
On 4/14/2015 3:23 PM, Sam Lambie wrote:
We currently have a Dragonwave Dual Mounted 2+0 PTP setup that is Ether
channeled with Cisco switches. Currently each radio
Thanks Gino.
This is a good read.
http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/TE_1208S.html
On Wed, Apr 15, 2015 at 11:24 AM, Gino Villarini g...@aeronetpr.com wrote:
Mpls TE using Telco Systems
Gino A. Villarini
@gvillarini
On Apr 14, 2015, at 6:25 PM, Sam Lambie
I am unclear on Unifi Video Zone record settings. Does it record motion
within the blue zone area or the outside?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
, Sam Lambie samtaos...@gmail.com
wrote:
I am unclear on Unifi Video Zone record settings. Does it record motion
within the blue zone area or the outside?
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598
throughput. Is there
something better than Ether channel?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I speak Cerveza y Burrito.
On Thu, Mar 19, 2015 at 9:58 AM, Jaime Solorza losguyswirel...@gmail.com
wrote:
One of my best friends speaks Tewa. She is a Tigua ..she also speaks some
Apache. Mescalero
Jaime Solorza
On Mar 19, 2015 9:53 AM, Sam Lambie samtaos...@gmail.com wrote:
Between
Between an FSK, a 430, and a backhaul to a micropop, we have over 110
customers on this site. Time for an upgrade.
On Thu, Mar 19, 2015 at 9:49 AM, Sam Lambie samtaos...@gmail.com wrote:
Taos, the land of small Pinon trees and big sky. I Love being from here.
The houses are styled to match
. ..
Jaime Solorza
On Mar 18, 2015 2:17 PM, Patrick Leary patrick.le...@telrad.com wrote:
Gorgeous spot. On several levels. Nice looking installation too.
*Sent from my Verizon Wireless 4G LTE DROID*
On Mar 18, 2015 2:23 PM, Sam Lambie samtaos...@gmail.com wrote:
Latest 450 Install
[mailto:af-boun...@afmug.com af-boun...@afmug.com] *On
Behalf Of *Sam Lambie
*Sent:* Friday, March 13, 2015 9:51 AM
*To:* af@afmug.com
*Subject:* [AFMUG] 450 AP and CIR.
We are looking at other ways to sell bandwidth. Looking at the big guys
and how their speeds are all over the map during peak
in the same CIR pool which is then portioned out
according to priority channels and regular best effort queues.
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie
*Sent:* Friday, March 13, 2015 9:51 AM
*To:* af@afmug.com
*Subject:* [AFMUG] 450 AP and CIR.
We are looking
I know that NAT takes off some throughput, but does using a PPoE session do
the same? And if so, how much?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
available bandwidth.
Say, put max 40 users on each AP at 2 mbps CIR.
- If one of the stacked AP's fails and the SM's jump to the other one, what
happens if the CIR is greater than the sum of the AP?
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
*From:* Sam Lambie samtaos...@gmail.com
*Sent:* Tuesday, March 10, 2015 11:35 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Coax retransmit
What about a DSLAM? Is there a common phone board somewhere in the
building that you could tap into? 1 Antenna or hard line to a router and
the DSLAM
, they already have coax to each
apartment. Anyone know what I could buy to get my ubiquiti radio signal
covered to coax to bring them the Internet?
Thank you,
Brett A Mansfield
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Thanks, I got it to work!
Now off to impress the boss with my powerful knowledge.
On Fri, Feb 13, 2015 at 11:28 AM, Sam Lambie samtaos...@gmail.com wrote:
Yay! I'll get back on the project then. thanks for the input guys.
On Thu, Feb 12, 2015 at 9:29 PM, Rory Conaway r...@triadwireless.net
Stream 7 for under
$100. Quad-core Atom with full Windows 8.1, 32-bit, but who cares. I think
I'm just gonna do that instead. Then I can still run Winbox, SiteMonitor
Manager for those old Base-1's out there and other stuff that only works on
x86.
Anybody know of something better?
--
--
*Sam
, timothy steele timothy.pct...@gmail.com
wrote:
Turn Airmax off
—
Sent from Mailbox https://www.dropbox.com/mailbox
On Thu, Feb 12, 2015 at 6:48 PM, Sam Lambie samtaos...@gmail.com wrote:
Is this even possible? I have been dinking with an AP and SM here on
the bench for a while
Is this even possible? I have been dinking with an AP and SM here on the
bench for a while and can't get them to talk. The other way around, no
problem.
Trying to not have to do a mass swap of SM's in order to upgrade an AP if I
can get away with it.
--
--
*Sam Lambie*
Taosnet Wireless Tech
Heskett af...@zirkel.us
*Sent:* Saturday, February 07, 2015 2:28 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Recommended OMNI for a 58430 AP
you will only get about 3 maybe 4 miles out of a 450 with an omni
On Fri, Feb 6, 2015 at 10:57 AM, Sam Lambie samtaos...@gmail.com wrote:
I know I
Thanks Eric. Very helpful.
On Thu, Feb 5, 2015 at 10:25 AM, Eric Muehleisen ericm...@gmail.com wrote:
I believe this still works...
The Reboot Unit Tool in CNUT can be scheduled using the Windows Task
Scheduler or cron as follows:
The Command Line for launching the Tools is:
java -cp
is uptime. I rebooted the AP yesterday.
Yesterday I installed the AP with a UBNT 10 dbi OMNI and the Range sucked.
-82 at 3.1 miles. It's what I had on hand.
I am looking for twice the distance at -79 or better. This is a SUPER Rural
area with no noise.
thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless
I am a lover of getting a good nights sleep. Besides doing a network
Update, is there a way to schedule a simple reboot at 3:30 am?
Cheers,
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I have looked on the list and can't find anything. I did it once and
promptly forgot how to do it.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
Got it, I didn't have my smart glasses onDuh
On Mon, Feb 2, 2015 at 3:40 PM, Sam Lambie samtaos...@gmail.com wrote:
You say it should be like this?
o O g B br G b B
1 2 3 5 7 6 4 8
On Mon, Feb 2, 2015 at 1:55 PM, Sam Lambie samtaos...@gmail.com wrote:
I just tried that and no go
You say it should be like this?
o O g B br G b B
1 2 3 5 7 6 4 8
On Mon, Feb 2, 2015 at 1:55 PM, Sam Lambie samtaos...@gmail.com wrote:
I just tried that and no go.
On Mon, Feb 2, 2015 at 1:42 PM, David dmilho...@wletc.com wrote:
Swap the stripes at one end
ie: blu/wht and brwn/wht
I just tried that and no go.
On Mon, Feb 2, 2015 at 1:42 PM, David dmilho...@wletc.com wrote:
Swap the stripes at one end
ie: blu/wht and brwn/wht
SHHH... I need to encrypt this :)
On 02/02/2015 02:38 PM, Sam Lambie wrote:
I have looked on the list and can't find anything. I did
Can help?
THX
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
be a reason. By all means, do not
use a hammer. -- IBM maintenance manual, 1925
--
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
to bring your clients to our next generation hosted email solution.
Regards,
*Sarah Vlasic*
ISP Email Migration Project Coordinator
[image: Image removed by sender. Virtacore Systems, Inc.]
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http
and protected from disclosure. Any review,*
*dissemination or use of this transmission or its contents by*
*unauthorized organizations or individuals is strictly*
*prohibited.*
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I have a lot of 5.2 Canopy P9 and P10's for sale.
$25 each. Up to 40 of them.
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
@01CE2975.BD4B6370]
*Daniel White* | Managing Director
*SAF North America LLC*
*Cell:*
(303) 746-3590
*Skype:*
danieldwhite
*E-mail:*
daniel.wh...@saftehnika.com
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie via Af
*Sent:* Friday, December 5, 2014 10:14 AM
ready to work in 5.4? Or is there something that cripples
them?
Driving me fricking crazy!
sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
.
]
Are these radios ready to work in 5.4? Or is there something that cripples
them?
Driving me fricking crazy!
sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
users are fine and the
lower users re-reg.
Thanks
sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I have a big box of P9 and P10 SM's that I need to get rid of. $25 each
Plus shipping.
Thanks
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
it. Easy to mount. No need to crimp. Small profile.
I will mount the second side tomorrow and see how it performs.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
They are stating that they have a 6-8 week turn around for a new radio.
On Wed, Oct 29, 2014 at 10:20 AM, That One Guy via Af af@afmug.com wrote:
out of curiousity, why not go through Dragon wave for a replacement? are
they not stocking them?
On Wed, Oct 29, 2014 at 11:07 AM, Sam Lambie via
firmware or do they hit the wall at
7.3.6?
I’m thinking that they are P8s or older and probably stuck at 7.3.6
software scheduling.
If so, I’ll need a 2 radios to get the link back up.
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
P9's or better.
On Mon, Oct 27, 2014 at 10:16 AM, Sam Lambie samtaos...@gmail.com wrote:
I have some in both frequencies. BH20. Let me know.
On Mon, Oct 27, 2014 at 10:11 AM, Dan Petermann via Af af@afmug.com
wrote:
We have a client running v6.1 on a pair of BH radios. One of the radios
I heard somewhere at WISPApalooza that the M series does 5.2 band now? Is
that smoke and mirrors?
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
http://www.ics-il.com
https://www.facebook.com/ICSIL
https://plus.google.com/+IntelligentComputingSolutionsDeKalb
https://www.linkedin.com/company/intelligent-computing-solutions
https://twitter.com/ICSIL
--
*From: *Sam Lambie via Af af@afmug.com
*To: *af@afmug.com
://community.ubnt.com/t5/airMAX-General-Discussion/FCC-UNII-2-Approval-and-Label-Request-Procedure/td-p/274828
- Original Message -
*From:* Sam Lambie via Af af@afmug.com
*To:* af@afmug.com
*Sent:* Wednesday, October 22, 2014 11:51 AM
*Subject:* Re: [AFMUG] Rocket M5 and 5.2 band?
Where
Irish? Really?
Sam Lambie
Wireless Internet Technician
www.taosnet.com
575.758.7598
On Oct 19, 2014, at 3:06 PM, Josh Reynolds via Af af@afmug.com wrote:
I just started learning Irish and German on it a week before Vegas. My wife
is working on Italian. It's amazing.
I worked
Thanks. How can I be lazy and copy that pop up to copy the OID?
Sam Lambie
Wireless Internet Technician
www.taosnet.com
575.758.7598
On Sep 24, 2014, at 3:01 PM, Forrest Christian \(List Account\) via Af
af@afmug.com wrote:
That's the right way to do it.
If you go into the web interface
201 - 300 of 300 matches
Mail list logo