for ATmegaxxM1
#endif// GCC
/**
CAN Interrupt
**/
{
unsigned char saved_page = CANPAGE;
unsigned char i;
if ( !(PINC (1<
Ogg: [Canfestival-de
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 24-dic-2018 12.13
A:
Ogg: [Canfestival-devel] R: Re: R: R: Re: R: R: R: R: R: Re: R: Re: R: Re: R:
Re: R: R: R: R: R: R: R: R: R: Re: R: Re: R: Re: CanFestival on ATmega64M1 in
Arduino IDE
.
What to you suggest to do in order to avoid that the uC stays trapped in the
CAN_INT_vect?
Thanks in advance
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 22-dic-2018 10.01
A:
Ogg: Re: [Canfestival-devel] R: R: Re: R: R: R: R: R: Re: R: Re: R: Re
I tried to mask the CANGIE register with no success.
I'll do other tests
Thanks
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 22-dic-2018 10.01
A:
Ogg: Re: [Canfestival-devel] R: R: Re: R: R: R: R: R: Re: R: Re: R: Re: R: Re:
R: R: R: R: R: R: R
t; but sometime happen that the uC try to goes in sleep but suddenly it comes
> back in "run"
>
>
> Messaggio originale
> Da: canfestival-devel@lists.sourceforge.net
> Data: 20-dic-2018 17.10
> A:
> Ogg: [Canfestival-devel] R: Re: R: R: R: R: R: Re:
ith can interrupts.
Now I'm doing other tests to solve this issue.
thanks anyway
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 20-dic-2018 16.54
A:
Ogg: Re: [Canfestival-devel] R: R: R: R: R: Re: R: Re: R: Re: R: Re: R: R: R:
R: R: R: R: R: R
// Init the state
>
> so, shall I have to do something before the sleep?
>
> and after at the wake up?
>
> Thanks in advance to anyone spends time in this.
>
>
>
> Messaggio originale
> Da: canfestival-devel@lists.sourceforge.net
> Data: 19-dic-2018 18.5
); // Init the state
so, shall I have to do something before the sleep?
and after at the wake up?
Thanks in advance to anyone spends time in this.
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 19-dic-2018 18.52
A:
Ogg: [Canfestival-devel] R: R: R: R: Re: R
ON if something is received just before to go in sleep.
Any suggestion?
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 18-dic-2018 10.24
A:
Ogg: [Canfestival-devel] R: R: R: Re: R: Re: R: Re: R: Re: R: R: R: R: R: R:
R: R: R: Re: R: Re: R: Re
Sorry guys my fault.
The default nodeID is 0x01.
Everything works correctly
Thanks and sorry
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 18-dic-2018 10.17
A:
Ogg: [Canfestival-devel] R: R: Re: R: Re: R: Re: R: Re: R: R: R: R: R: R: R:
R: R: Re
ObjDict_obj1200_COB_ID_Client_to_Server_Receive_SDO =
0x605;/* 1536 */
where 0x05 is the nodeID
I get the right reply from my node
Is this a bug on the object dictionary building procedure in the python script?
Waiting a kind reply
Thanks
Messaggio originale
Da: canfestival-devel
;
Ogg: Re: [Canfestival-devel] R: Re: R: Re: R: Re: R: R: R: R: R: R: R: R: R:
Re: R: Re: R: Re: CanFestival on ATmega64M1 in Arduino IDE
symboles.c: dont know if it does any damage, but it does nothing good.
it's for Linux kernel module usage you should not include it in A
peated for many symbols:
>
> honestly I don't think so but for completeness I give you this information
>
> Thanks
>
> Messaggio originale
> Da: canfestival-devel@lists.sourceforge.net
> Data: 13-dic-2018 21.02
> A:
> Ogg: Re: [Canfestival-devel] R: Re: R: R
replies on the BUS.
This kind of warning message is repeated for many symbols:
honestly I don't think so but for completeness I give you this information
Thanks
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 13-dic-2018 21.02
A:
Ogg: Re: [Canfestival-devel] R
any heartbeat number setting works, but the
second node when the heartbeat sets for more than 15 items does not set the
ProducerHeartBeatTimer and also no hearbeat for second node receives, in
node number below this the program works properly
___________
Canfestiv
Do the can messages look okay in the canDispatch function (states.c)
On Thu, Dec 13, 2018 at 7:30 PM wrote:
>
> That's the strange thing.
>
> The node doesn't react to any message sent
>
> Messaggio originale
> Da: canfestival-devel@lists.sourceforge.net
>
That's the strange thing.
The node doesn't react to any message sent
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 13-dic-2018 18.04
A:
Ogg: Re: [Canfestival-devel] R: Re: R: R: R: R: R: R: R: R: R: Re: R: Re: R:
Re: CanFestival on ATmega64M1
when you send something on the canbus you get a response from the node
that depends if the object dictionary element is implemented in the dictionary.
In my case I don't get any reply from the node.
I don't know why
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
> in the can_AVR.c file
>
> ----Messaggio originale
> Da: canfestival-devel@lists.sourceforge.net
> Data: 12-dic-2018 11.49
> A:
> Ogg: [Canfestival-devel] R: R: R: R: R: R: R: R: Re: R: Re: R: Re:
> CanFestival on ATmega64M1 in Arduino IDE
>
>
> the Atmega64M1 h
Ok,
solved with
// CANIE1 = 0x7F;// Enable the interrupts of all MObs (0..14)
// CANIE2 = 0xFF;
CANIE2 = 0x3F;// Enable the interrupts of all MObs (0..5) edited for
ATmegaxxM1
in the can_AVR.c file
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
originale
Da: canfestival-devel@lists.sourceforge.net
Data: 12-dic-2018 11.33
A:
Ogg: [Canfestival-devel] R: R: R: R: R: R: R: Re: R: Re: R: Re: CanFestival on
ATmega64M1 in Arduino IDE
Sorry my mistake,
the number of PDO sent after the operational mode
;
/**/
in the timer_AVR.c
Any suggestion?
Thanks in advance
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 11-dic-2018 16.01
A:
Ogg: [Canfestival-devel] R: R: R: R: R: Re: R: Re: R: Re: CanFestival on
ATmega64M1
is to make a master reset in order to receive other 5 PDO.
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 11-dic-2018 12.21
A:
Ogg: [Canfestival-devel] R: R: R: R: Re: R: Re: R: Re: CanFestival on
ATmega64M1 in Arduino IDE
hello,
I found
for me.
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 11-dic-2018 11.30
A:
Ogg: [Canfestival-devel] R: R: R: Re: R: Re: R: Re: CanFestival on ATmega64M1
in Arduino IDE
Hi,
something strange compare if I try to debug the TCNT1 and OCR1B
Hi,something strange compare if I try to debug the TCNT1 and OCR1B values.
Why I get only values from 0 to 255?
The timer1 is a 16bit timer
???
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 11-dic-2018 10.04
A:
Ogg: [Canfestival
,heartbeat for second node doesn't produce and
producerheartbeartimer is -1 .
Could you help me in handing this problem?
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
ale
Da: canfestival-devel@lists.sourceforge.net
Data: 10/12/18 20:58 (GMT+01:00)
A: canfestival-devel@lists.sourceforge.net
Oggetto: Re: [Canfestival-devel] R: Re: R: Re: CanFestival on ATmega64M1 in
Arduino IDE
This I should be able to help you with
in timerscfg.h there are two mac
= (1 << CS11) | (1 << CS10); // Timer 1 normal, mit CK/64
TIMSK1 = 1 << OCIE1B; // Enable the interrupt
}
Any comment/suggestion?
Thanks in advance
Messaggio originale
Da: canfestival-devel@lists.sourceforge.net
Data: 6-dic-2018 21.
: canfestival-devel@lists.sourceforge.net
Data: 6-dic-2018 21.04
A:
Ogg: Re: [Canfestival-devel] R: Re: CanFestival on ATmega64M1 in Arduino IDE
Hi,
I do not have access to a ATmega64M1, so there is no way AFIK for me
to run and debug your code.
Also near zero experience with Arduino
Da: canfestival-devel@lists.sourceforge.net
Data: 3-dic-2018 17.52
A:
Ogg: Re: [Canfestival-devel] CanFestival on ATmega64M1 in Arduino IDE
Hi,
Does anything work?
Like heartbeat or sdo?
could you check if the code reaches buildPDO?
Best Regards
Lars
On Sat, Dec 1
Hi everyone
Where can I find example of using SDO block transfer using canfestival
library ?
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
that someone can help me in this
Thanks
Alessio
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
ct have about 70 node ids and making .c and .h for each node
> makes the code so messy.
>
> Waiting for your response, thanks
> _______
> Canfestival-devel mailing list
> Canfestival-devel@lists.sourceforge.net
> https://lists.source
.c and .h for each
node makes the code so messy.
Waiting for your response, thanks
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
t; 2. To put multiple co_ data variables but because all them use same
> initializer and their values are equal
>
> What can I do to solve this problem,
> Many thanks
>
> ___________
> Canfestival-devel mailing list
> Canfestival-devel@lists
it was unable to copy
the index table variable.
2. To put multiple co_ data variables but because all them use same
initializer and their values are equal
What can I do to solve this problem,
Many thanks
___
Canfestival-devel mailing list
Canfestival-devel
our guides
> Thanks for your help
> ___________
> Canfestival-devel mailing list
> Canfestival-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/canfestival-devel
>
___________
Canfestival-devel mailing
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https
**
regards
Jara
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______
Canfestival-devel mailing list
Canfestival-devel@lists.so
this question
regards
Jara
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______
Canfestival-devel
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
gaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
baudrate)
{
if (BusesMap.empty())
return false;
map::iterator it;
it = BusesMap.find(baudrate);
if (it == BusesMap.end())
{
return false;
}
return true;
}
canBus * canDev::GetBusAddress(char *baudrate)
{
map::iterator it;
it = BusesMap.find(baudrate);
return (*it).second;
}----
einterpret_cast<canDev*>(res)->canSetBus(temp);
temp->ConnectedDevID();
return res;
}
catch (...) {
cerr << "can_new: couldn't open" << endl;
return NULL;
}
}
int LIBAPI canClose_driver(CAN_HANDLE inst)
{
delete reinterpret_cast<canDev*>(inst);
return 1;
}
UNS8 LIBAPI canChangeBaudRate_driver(C
;
int res = reinterpret_cast<canDev*>(fd0)->canReceive_driver(m1);
You might want to turn on a loot of the compiler warnings as it will
help finding bugs.
As soon as you have fixed the bug i can take a new look.
Happy coding!
Best Regards
Lars
On Tue, Apr 17, 2018 at 2:32 PM,
<canfe
4. If you are still using windows, could you try to remove config.h
from the include folder. It is causing some trubble on my setup.
What have you tried av what does the MSG_WAR print out when you try to use sdo
On Wed, Apr 4, 2018 at 8:08 AM,
<canfestival-devel@lists.sourceforge.net> wrote
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
---
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______________
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
, means unknown state.
I see initiate upload request and after that abort transfer request on
terminal.
Many thanks for your response
Samini
On 27 Feb 2018 7:41 p.m., <canfestival-devel@lists.sourceforge.net> wrote:
> Hi Samini,
>
> Have a few questions
> 1. What linux distro a
bufferXL.QuadPart)/pFrequency.QuadPart);
}
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
to start canOpenShell and
the ssta command
Best regards
Lars
On Sat, Feb 24, 2018 at 5:58 PM,
<canfestival-devel@lists.sourceforge.net> wrote:
> Hi
> I am beginer in using can festival,
> finally i decided to switch to linux,
> I can change value in PDO mapping and access t
, 2018 at 11:36 AM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Dears,
>
> I has been fixed:
> CanFestival\drivers\timers_win32\timers_win32.c
> see attachment.
>
> The function timeGetTime() is not granted to have better granularity than
> 5ms.
> It ca
//sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
TestSlave.c
Finally I found out that because of deleting -mno-cygwin flag :((
Then I decided to switch to linux
On 22 Feb 2018 12:12 p.m., <canfestival-devel@lists.sourceforge.net> wrote:
> Hi,
> Those missing file are generated from the .od files.
>
> See link below to learn how t
Hi,
Those missing file are generated from the .od files.
See link below to learn how to do that.
https://canfestival.org/doc
On Feb 13, 2018 09:57, <canfestival-devel@lists.sourceforge.net> wrote:
> Hi
> I want to use only vs, but it seems impossibly!
> Whenever I open c
/testmasterslave there isn't any testmaster.c or
testslave.c and I don't know what should I do!
Then I force to build these files using cygwin and make file .
Thanks for your patience and answers
On 13 Feb 2018 3:22 a.m., <canfestival-devel@lists.sourceforge.net> wrote:
> Il Mon, 12 Feb 2018
Il Mon, 12 Feb 2018 12:08:26 +0330 canfestival-devel@lists.sourceforge.net
scrisse:
> Yes, my callsatck:
>
> cygwin1.dll!610dda44() Unknown
>
> [Frames below may be incorrect and/or missing, no symbols loaded for
> cygwin1.dll]
>
> CanFestival-3.dll!scanIndexOD(stru
*, unsigned char) * * * Callback) Line 267 C
On 12 Feb 2018 11:17 a.m., <canfestival-devel@lists.sourceforge.net> wrote:
> Okay,
> But, could you print out the stack?
>
>
> On Mon, Feb 12, 2018 at 2:54 PM, <canfestival-devel@lists.sourceforge.net>
> wrote:
>
>> Hi
Okay,
But, could you print out the stack?
On Mon, Feb 12, 2018 at 2:54 PM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Hi
> This exception thrown at 0x610DDA44 (cygwin.dll ) in TestMasterSlave.exe :
> 0xc005 Access violation writing location 0
> This exception occu
Hi Again
You are right, testmasterslave and testmastermicromode run okey
But for me only on cygwin not on vs.
Did you run your code .exe on vs?
On vs I'm still getting exception
Many thanks for your response.
On 10 Feb 2018 12:00 p.m., <canfestival-devel@lists.sourceforge.net> wrote:
>
link
https://ci.appveyor.com/project/nimrof/canfestival-3-asc-clean-rrna1
I had same output for my cygwin and for --can=virtual.
but I have the same error on vs.
On Thu, Feb 8, 2018 at 4:48 PM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Hi,
>
> Sorry for the short reply tod
, Feb 8, 2018 at 3:16 PM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Hi
> Many thanks for your response.
> I attached my makefile.
> I downloaded your file and try to build it but it wasn't successful, I got
> some linker errors.
> "LNK2001 unresolved external symbo
n32
in "make" and "make install" steps I got "
_beginthreadex; : undeclared identifier"
but I can build .exe and In running I got Segmentation fault and
exception.
I really want your guidance.
looking for your respones
On 8 Feb 2018 1:27 a.m., <canfestival-deve
might want to have a look at the appveyor file, it is the
file I use for VS and cygwin build. So all the build commands are there.
On Feb 6, 2018 02:11, <canfestival-devel@lists.sourceforge.net> wrote:
Hi
I want to use canopen of canfestival.
And to run at least one of the examples on visual
.org! http://sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
all output variables (by index for
example) and create PDOs only for updated ones. Hope it clarifies a little bit.
Regards
Artyom
Von: canfestival-devel@lists.sourceforge.net
[mailto:canfestival-devel@lists.sourceforge.net]
Gesendet: Dienstag, 21. November 2017 14:44
An: canfestival-devel
On Tue, Nov 7, 2017 at 4:37 AM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Hi Lars,
>
> I know these functions, but my understanding is that these APIs should not
> be used outside of callbacks, as pdf manual suggests, to avoid data
> corruption in dictionary. So I'm
Hi Lars,
I know these functions, but my understanding is that these APIs should not
be used outside of callbacks, as pdf manual suggests, to avoid data
corruption in dictionary. So I'm looking for something else, or maybe I'm
wrong here...
2017-11-06 20:18 GMT+01:00 <canfestival-de
Hi Artyom,
You might want to take a look into the function readLocalDict and
writeLocalDict. Both found in objacces.h
Best regards
Lars
On Mon, Nov 6, 2017 at 12:32 PM, <canfestival-devel@lists.sourceforge.net>
wrote:
> Dear all
>
>
>
> As I see from examples, standar
Il Sun, 4 Jun 2017 13:37:52 +0200 canfestival-devel@lists.sourceforge.net
scrisse:
> ...
> Do you mind if i send the pull request for you?
Absolutely not. Fill free to do whatever you want with my
contributions: I only need to get the job done.
Ciao.
--
Hi,
Do you mind if i send the pull request for you?
Regards
Lars E. Susaas
On Fri, Jun 2, 2017 at 12:09 PM,
<canfestival-devel@lists.sourceforge.net> wrote:
> Il Thu, 1 Jun 2017 12:25:23 +0200 canfestival-devel@lists.sourceforge.net
> scrisse:
>
>> Hi,
>>
&
;>
>> Do please comment on my suggestions and ask questions
>>
>>
> Some ideas:
> - be sure to be able to have several instances of the same driver in a
> single process
> - in case of USB to CAN adapters be resistant to live unplug / replug
Thanks for the tip.
I got a usb device with dual can that i can test with.
> I'm ready to test your new socketcan driver when you think it's done.
>
> Regards
>
> François Beaulier
>
Thanks for the offer!
I will post in this maillist when it is ready for testing.
The state is now that i got it the new socketCan driver with
CANOpenShell compiling yesterday. So time for debugging :)
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
same driver in a
single process
- in case of USB to CAN adapters be resistant to live unplug / replug
I'm ready to test your new socketcan driver when you think it's done.
Regards
François Beaulier
------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
and want to help as a private person.
Best regards
Lars E. Susaas
On Thu, Apr 6, 2017 at 4:40 PM,
<canfestival-devel@lists.sourceforge.net> wrote:
> Hello everybody,
>
>
>
> I like the canfestival project and I'm very interested to get involved.
>
>
>
> I want to use ca
.
Best regards
Michael Kakuschky
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Canfestival-devel
supports
*
* /param fd pointer to driver structure
*
* /return 0 if success
* /return -1 if failed (not in use)
*/
UNS32 SocketFD_probe(const char* devName)
{
int result;
int i;
struct can_ctrlmode cm;
memset(, 0, sizeof(cm));
int numModesToTest = (sizeof(socketCanBinding) / sizeof(socketCanBinding[0]))
viceNodeId==0xFF))
+ *(UNS32*)d->objdict[offset].pSubindex[1].pObject = (cobID[i] + nodeId) | otherBits;
i ++;
offset ++;
}
--
Check out the vibrant tech community on one of the world's most
engaging tech s
the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
Hi Greg,
I'm afraid you have to do it yourself for Linux.
After configure, edit include/config.h and add
SDO_DYNAMIC_BUFFER_ALLOCATION_SIZE and SDO_DYNAMIC_BUFFER_ALLOCATION
defines just like in win32/config.h
Francois
Le 20/02/2017 à 18:07, canfestival-devel@lists.sourceforge.net a écrit
the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists
Hi Greg,
After the OD write do you use getWriteResultNetworkDict() function to
get the transfer result ?
And if yes what is the returned status ?
--
Francois Beaulier
www.ingelibre.fr
Le 19/01/2017 à 01:45, canfestival-devel@lists.sourceforge.net a écrit :
Hello list,
We have a problem
Hi,
It is possible to do the changes in the source files, but it is faster and
better to use the objdictedit python program to make a .od and generate the c
source files from that.
Please send .od file if you still have problems.
Regards
Lars
From: canfestival-devel@lists.sourceforge.net
Callbacks' then a variable holding a function
pointer will be added to the generated OD.
Just add a pointer to your function to that variable and your good to go.
Regards
Lars
From: canfestival-devel@lists.sourceforge.net
[mailto:canfestival-devel@lists.sourceforge.net]
Sent: Friday, December 9
Hello,
Please let me how to create OD and register callback functions to receive RXPDO
data from slave.
Best regards
Ajay Barge
RBEI/ETP
Tel. +91(80)6783-6914
From: canfestival-devel@lists.sourceforge.net
[mailto:canfestival-devel@lists.sourceforge.net]
Sent: Thursday, December 08, 2016 12
to change
one of the RPDO with objdictedit on the master 0x1400-0x15FF i am getting
COB-ID as 200.
Please let me know what steps i need to take in the canfestival stack to recive
PDO data from slve.
Best regards
Ajay Barge
RBEI/ETP
Tel. +91(80)6783-6914
From: canfestival-devel
-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
16 à 02:06, canfestival-devel@lists.sourceforge.net a écrit :
Hello again, Francois,
I've just gotten to the point that I'm trying to access OD1008,
DeviceName, which is a Visible_String. I'm doing a
readNetworkDictCallbackAI(), with the data type set to visible string.
The request is going out as an
. There is no way to specify the size of the
transfer for a network dictionary read.
How do I get the request to go out as a segmented request?
Regards,
Greg
From: canfestival-devel@lists.sourceforge.net
[mailto:canfestival-devel@lists.sourceforge.net]
Sent: Friday, October
From: canfestival-devel@lists.sourceforge.net
[mailto:canfestival-devel@lists.sourceforge.net]
Sent: Friday, October 14, 2016 2:09 PM
To: canfestival-devel@lists.sourceforge.net
Subject: Re: [Canfestival-devel] Developing software update
Hi Greg
1- yes canfestival will do a segmented transfer
https://bitbucket.org/Mongo/canfestival-3-asc for a more up to date
code.
Kind regards
--
Francois Beaulier
www.ingelibre.fr
Le 13/10/2016 à 02:41, canfestival-devel@lists.sourceforge.net a écrit :
Hi list,
We are running CanFestival on a RPi3 and using code derived from
EPOSMachineKit
Thank you Lars for your input.
Francois Beaulier
Le 20/09/2016 à 13:53, canfestival-devel@lists.sourceforge.net a écrit :
> Hi Francois,
>
> Here is my 5 cents
>
> As far as i can see its marel.com ('provider of advanced food processing
> systems and services') that
--
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
oubleclick.net/ddm/clk/302982198;130105516;z___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
eclick.net/gampad/clk?id=278785351=/4140
_______
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
12/03/2016 14:32, canfestival-devel@lists.sourceforge.net a écrit :
> Hi,
>
> I hope someone can help me here, I try to control an Epos motor
> controller with my linux PC.
> I used the Objdictedit tool to import an .eds file of an Epos motor
> controller (generated by EPOS studi
5111=/4140
___
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
s correction is right (it works for me). If yes, could
someone check in the changes?
Thanks
Torsten
----------
___________
Canfestival-devel mailing list
Canfestival-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/canfestival-devel
but no clue anywhere.
Could you please help me to know what could be the possible reason?
Regard's
Tarun
--
___
Canfestival-devel mailing list
Canfestival-devel
1 - 100 of 647 matches
Mail list logo
