[beagleboard] getting started with beaglebone black

Hello BB experts, I recently purchased my first Beaglebone Black and cant wait to get started. Have mostly worked on bare-metal microcontroller projects mostly involving close loop motor control applications.I would like to step into the world of operating systems(especially Linux) and decided

Re: [beagleboard] Speedtest-cli headache on BB black

On Fri, Feb 9, 2018 at 5:00 AM, 'NetworkSorcerer' via BeagleBoard wrote: > Hi Folks > > Boy this is a doozy... > > I've been trying to set up a Beaglebone Black as a lightweight autonomous > networking appliance to monitor and analyse connection performance at remote

Re: [beagleboard] Is there a "Smaller Footprint" LXQT Image for BB-X15 (preferably Jessie)?

One thing I'm noticing on my 572xEVM-Rev a3 at work (which I don't THINK I saw on my BB-X15 (?revC?) at home last-night is the following error message whenever I plug in an HDMI cable which is connected to a DELL monitor through an HDMI<->DVI adaptor: [ 42.531433] omapdss error: HDMI I2C

Re: [beagleboard] Is there a "Smaller Footprint" LXQT Image for BB-X15 (preferably Jessie)?

sorry - half baked question... Let me pull in the correct device tree for my image and get back to you. On Friday, February 9, 2018 at 9:28:17 AM UTC-6, Jeff Andich wrote: > > > One thing I'm noticing on my 572xEVM-Rev a3 at work (which I don't THINK I > saw on my BB-X15 (?revC?) at home

[beagleboard] Re: Beaglebone Black wake up from resume on GPIO event

Stupid me for not consulting the TRM and thinking the hardware engineer did his job. Only GPIO bank 0 allows wakeup and I only have pins from GPIO banks 1 and 2 connected for wakeup. http://www.ti.com/lit/an/sprac74a/sprac74a.pdf Section 3.2.3 clarifies it. - Sanchayan. On Thursday, February

Re: [beagleboard] Speedtest-cli headache on BB black

On Fri, Feb 9, 2018 at 8:42 AM, Robert Nelson wrote: > On Fri, Feb 9, 2018 at 5:00 AM, 'NetworkSorcerer' via BeagleBoard > wrote: >> Hi Folks >> >> Boy this is a doozy... >> >> I've been trying to set up a Beaglebone Black as a lightweight

Re: [beagleboard] Speedtest-cli headache on BB black

That's darned curious to be sure. Cabling issues were looked at early, first we though it was piping through the usb, then we hooked up directly to our gateway (a draytek vigor... notoriously glitchy routers imo) to eliminate any dodgy structured cabling or switching gear. Boss is going to

Re: [beagleboard] Is there a "Smaller Footprint" LXQT Image for BB-X15 (preferably Jessie)?

Note: This is a problem with my DVI monitor (and my lack of knowledge on the subject), not the image.. I've only seen the timeout error when I plug into my DVI monitor, not when plugging into HDMI monitors (and I've tried 2 of the latter thus far). I think what's going on with the timeout

[beagleboard] Unable to boot microSD/Standalone: (stretch-console) (BeagleBoard-X15)

I downloaded the stretch-console for x15 and imaged an 8GB SD Card on macOS using Etcher. I put this in the x15 and powered it on. It gets partway through the boot process, and appears to be booting from the SD card (the installed kernel on the MMC is -r44, and the log shows -r96), but then it

RE: [beagleboard] x15 STEP file?

No, we never did one. We did not do the profiles for all of the parts on the board. Gerald -Original Message- From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Rick Mann Sent: Friday, February 9, 2018 6:34 PM To: beagleboard@googlegroups.com

Re: [beagleboard] x15 STEP file?

You don’t know of anyone with Altium? Try and find your local Altium user group and see if someone will help you. Regards, John > On Feb 9, 2018, at 5:54 PM, Rick Mann wrote: > > I don't have Altium. > >> On Feb 9, 2018, at 17:49 , John Syne

Re: [beagleboard] x15 STEP file?

I don't have Altium. > On Feb 9, 2018, at 17:49 , John Syne wrote: > > If you could Import the board into Altium it is pretty easy to create the > step file. Here is how that works. For each connector, add the 3D step file > from the connector manufacturer, align

Re: [beagleboard] x15 STEP file?

I’m wondering if this can be done with Eagle. It might be possible to import the gerber file, create the PCB from that and then add the connectors 3D parts. Perhaps someone who knows Eagle might comment. Regards, John > On Feb 9, 2018, at 5:54 PM, Rick Mann wrote: >

Re: [beagleboard] x15 STEP file?

Eagle does not support import of Gerbers. It will output Gerbers of boards you have designed. Only the latest (Autodesk) Eagle 8 version will support 3-D parts. --- Graham == On Friday, February 9, 2018 at 7:59:47 PM UTC-6, john3909 wrote: > > I’m wondering if this can be done with Eagle. It

Re: [beagleboard] x15 STEP file?

Yeah, I just checked and V8 does import gerber files https://knowledge.autodesk.com/support/eagle/troubleshooting/caas/discussion/t5/EAGLE-Forum/How-to-import-gerber-files/td-p/7058370.html Seems like Eagle uses ecad.io for 3D parts. This might work for you as it seems to import Allegro files.

RE: [beagleboard] x15 STEP file?

No Gerald -Original Message- From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Rick Mann Sent: Friday, February 9, 2018 6:07 PM To: Beagle Board Subject: [beagleboard] x15 STEP file? Is there an x15 STEP CAD file

Re: [beagleboard] x15 STEP file?

Oh, that's a pity. Makes it hard to know exactly where to place cutouts along the edges. I mean, I can measure it with calipers, but it's hard to get it accurate. In particular, I wanted to have the reset button insert into a boss on the enclosure to protect it from accidental presses. > On

[beagleboard] I2C1

Its good that the I2C busses are now using the same number for each bus in hardware and software. But I am seeing something weird with the I2C1 bus. If i use i2cdetect on bus 0 and 2 the bus scan is very fast and i see the things i expect from past scans on older linux versions. But if i scan

Re: [beagleboard] x15 STEP file?

If you could Import the board into Altium it is pretty easy to create the step file. Here is how that works. For each connector, add the 3D step file from the connector manufacturer, align connectors to board and pads and then export the complete board in step. I estimate that is would take a

[beagleboard] x15 STEP file?

Is there an x15 STEP CAD file available anywhere? -- Rick Mann rm...@latencyzero.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving

Re: [beagleboard] x15 STEP file?

Any chance of getting one? I'd like to design an enclosure for the x15. > On Feb 9, 2018, at 16:11 , Gerald Coley wrote: > > No > > Gerald > > -Original Message- > From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On > Behalf Of Rick

Re: [beagleboard] x15 STEP file?

Older versions of Eagle can do 3D exports. The process flow I have used with Eagle6 is - Generate a ENM file from the ULP exporter. Convert the ENM to a suitable 3D file format STEP Import there STEP file into MCAD There are suppose to be ULPs that can generate a SAT but that triggers a bug

[beagleboard] Speedtest-cli headache on BB black

Hi Folks Boy this is a doozy... I've been trying to set up a Beaglebone Black as a lightweight autonomous networking appliance to monitor and analyse connection performance at remote locations, the method is fairly straightforward. I'm using a simple bash script to run speedtest-cli and then

[beagleboard] Freebsd for the Beaglebone black wireless

Has anyone had any luck getting the beaglebone black wireless to boot from sd card in Freebsd? And if so how? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this