What you mean all hardware isn’t the same?
;)
> On Aug 17, 2017, at 3:18 PM, Gert Doering wrote:
>
> Hi,
>
> On Thu, Aug 17, 2017 at 02:01:07PM +0200, Andriy Bilous wrote:
>> Just a follow-up. Po interface is a L3 channel with subinterface po631.2310
>> configured, adding
Hi Nick,
In my opinion anything is better than Solar Winds but that’s me. I don’t
understand how any serious network monitoring company only offers their
products for the windows environment and has no Unix variants. That’s just
goofy to me but that aside here are some alternatives I have
I think this is a basic question but Googling has not helped me much so I’m
hopeful someone can shed the clue light on me a bit.
I’m trying to find the specific port an IP address is attached to on a 3850 in
L3 mode with SVI interfaces. SO for example if I do a show arp a.b.c.d I’ll
get the
As I recall and I’m happy to be corrected but when you exceed the 253 VLAN
limit with PVST the VLANs starting with the 254th added and on revert to RSTP.
> On Apr 20, 2017, at 10:18 AM, Gert Doering <g...@greenie.muc.de> wrote:
>
> Hi,
>
> On Thu, Apr 20, 2017 at 12
Oh boy, I’ve seen that 253 VLAN thing bite a big customer in the back side.
You add number 254 and whammo! I’m surprised that’s not been changed since I
first saw that issue back in 2013
> On Apr 20, 2017, at 5:51 AM, Sebastian Wiesinger
> wrote:
>
> * Gert Doering
That’s so true. I had old Sun equipment with multi year uptime numbers. I
remember when uptime was a real bragging point among admins.:)
> On Dec 8, 2016, at 10:06 AM, Steve Mikulasik
> wrote:
>
> Make sure you tell all the young techs "They don't make 'em like
Anything logged while this happens?
> On Oct 3, 2016, at 10:52 PM, Stephen Fulton wrote:
>
> Hi all,
>
> I have run into a number of forwarding failure events on ASR1K's with 10G
> SPA's. These have occurred across a range of IOS-XE versions, using various
> ROMMON
I believe, willing to be corrected, that you have to pay for the software
license as a line item.
> On May 19, 2016, at 12:26 PM, Satish Patel wrote:
>
> One thing i have confusion we have ask for quotation and they put
> Software charges like ASAR1R2-AESK9-316S
>
> We
A big +1 for Curvature / Network hardware resale. I’ve been working with them
since 2003 or so and it’s always been a very positive experience both buying
and selling to them. I forget the spelling of the last name of the guy I
worked with there but his name was something like Sam Cheslic and
Hi, this is a really strange problem for me and I’m hoping some others might
have a clue because I’m a bit confused. It’s also long and involved so anyone
busy or not interested stop here.
I have an IPVPN service from a carrier delivered presently over a pair of 2921
managed routers that
Route servers are your friend here.
There are things like the U Oregon route server where you basically log in to a
Cisco like prompt and can use all your show commands and various match criteria
to display the parts of the table you care about. These servers usually have
many peers and have
and also got some great
info here so chalk it up to a valuable learning experience.
Thank you
> On Oct 1, 2015, at 5:01 PM, Gert Doering <g...@greenie.muc.de> wrote:
>
> Hi,
>
> On Thu, Oct 01, 2015 at 05:15:40PM +, Scott Granados wrote:
>> Nick, this is a big help as w
Hi,
As someone who knows very little about the finer points of optics I have a
basic question and googling is just making me more confused with the part
numbers.
One of my upstream carriers is asking me to use WDM optics to attach.
Would this be a different part numbered SFP for the
Nick, this is a big help as were all the other responses.
I’m told it’s 1310 NM, 2 strands. I did not get a KM number which I will
request.
Thank you!
> On Oct 1, 2015, at 1:11 PM, Nick Hilliard <n...@foobar.org> wrote:
>
> On 01/10/2015 5:18 p.m., Scott Granados wrot
If you’re not enabling URPF at the peering routers and edges how do you handle
things like RTBH?
On Aug 25, 2015, at 7:56 AM, Mark Tinka mark.ti...@seacom.mu wrote:
On 18/Aug/15 22:43, Nick Hilliard wrote:
i'd advise being careful with this approach: urpf at ixps is a nightmare.
We
I’ve run in to this problem before.
Do something like
show neighbor a.b.c.d | inc data or | inc mss
You want to see what the maximum size is compared to MTU. For example, on a
1500 MTU this number should be 1460. In my case the issue was the interface
MTU was set to 1522 to include QinQ tags
Hi,
Wondering what people are doing / best practices for remote management
generally in datacenter environments. We have several datacenter with a mix of
Cisco, F5, Juniper and Palo Alto equipment in each. All have a similar RJ45
type console port and all are pretty much your garden variety
I know this question comes up from time to time and I’ve myself asked it before
but it was a while ago and some recent googling seems to indicate the landscape
has changed a lot.
I’m looking for recommendations for monitoring software. Basic alerting, SNMP
polling, trap handling, reporting,
Hi,
I have a strange problem and I’m not familiar with the inner workings of Skype
to know for sure but I believe I have a problem caused by my NAT config. In
some instances, after 1 minute the video will freeze especially when using a
Skype gateway to another service. Point to point Skype
Look for loose mode URPF and RTBH or remote triggering of blackholes. The idea
here you announce the routes you wish to block tagged with the correct
community and you instruct your edges to route these addresses to null or you
tag a community that your upstreams have provided that has the
NagIOS here and using SNMP traps to track neighbor and link state.
Also have a test instance of open NMS under evaluation which so far is doing
well.
On May 6, 2015, at 10:05 AM, Christopher Hunt dharmach...@gmail.com wrote:
I work at a small shop and only have a few customer BGP sessions,
Hi,
I’m looking at the Cisco web site and trying to figure which direction to go in
to for a multi home access project I have coming up. The goal will be to
terminate 2 carriers with full BGP feeds each providing 2 1G connections from
diverse data centers and announce a small number of blocks.
I’ve had the same experiences although to be totally fair I was working for the
other guys as an RE but I observed the same behavior with a very large customer.
It got so bad that even though I was working for a certain company that starts
with a J I had to help build the cisco test
It could be a bug but most likely a configuration issue. The bugs on the 65xx
platform are normally more like the supervisor will crash when the BGP table
counter reaches a certain threshold or similar to that not just the lack of
advertisement to a single peer. It’s possible but if you could
to their liking.
From: Adam Greene maill...@webjogger.netmailto:maill...@webjogger.net
To: 'Scott Granados' sc...@granados-llc.netmailto:sc...@granados-llc.net;
'CiscoNSP List' cisconsp_l...@hotmail.commailto:cisconsp_l...@hotmail.com
Cc: cisco-nsp
I would also add Nagios to the list. Open NMS has also been useful in the past
and groundwork was interesting all be it expensive for the fully baked
commercial version.
On Apr 24, 2015, at 12:00 AM, CiscoNSP List cisconsp_l...@hotmail.com wrote:
Hi Everyone,
Slightly off-topic, but we
Kingston all the way. At least for a while I know they were the company having
their memory rebranded. Not sure if this is still the case but have had very
good luck with their memory modules in Cisco devices.
On Apr 23, 2015, at 10:48 AM, Adam Greene maill...@webjogger.net wrote:
Hi
You can never assume that windows does anything correctly.
:)
On Mar 26, 2015, at 2:10 PM, Chuck Church chuckchu...@gmail.com wrote:
I guess I assumed windows using DNS correctly was wrong. There is a way to
flush dns (I think it’s ipconfig /flushdns) but it really shouldn’t be
necessary.
+1 for using a routing protocol. BGP with a private AS is a decent fit here.
On Mar 24, 2015, at 8:48 AM, Gert Doering g...@greenie.muc.de wrote:
Hi,
On Tue, Mar 24, 2015 at 08:27:59AM -0400, Dan Brisson wrote:
I'm curious what folks do in the situation where you have redundant
links to
Hi, I have a pair of ASR routers that had the following installed when
unpacked. Looking for recommendations of which software to upgrade to and use.
Basic requirements are BGP, HSRP and a very basic set of features.
Here’s the truncated show ver output
PROLevel3#show ver
Cisco IOS XE
Use local pref on learned routes.
Something like
ip prefix-list prefered-route seq 5 a.b.c.d/20
route-map preferred-routes permit 10
match ip address prefix-list prefered-route
set local-pref 200
and apply to the inbound side of your neighbor you want to gorse the traffic
through.
On Mar
I suppose that makes sense and you could buy spare fan trays so in the event of
the loss of cooling you could swap it out and be back in business. I buy that
argument, that’s a very good point.
On Mar 20, 2015, at 9:20 AM, Nick Hilliard n...@foobar.org wrote:
On 20/03/2015 13:09, Scott
Fan trays are for the weak.:)
Seriously though, wouldn’t you think a vendor would build in the proper cooling
and put the fans in the box instead of an extra tray?
Oh wait, then they wouldn’t have an extra accessory that you must have
to sell as another highly marked up line item.
I have never used Cisco’s ram for upgrades and never been bitten by this. The
memory is usually the same memory. At one point I remember seeing a Kingston
rebranded Cisco memory module for sale for several thousand dollars and the
Kingston equivalent was 100 and change. Cisco memory is one
Remove Windows and run Linux.;)
Seriously, insure that the ntp server is correct under control panel, time and
internet time tab. Also, if these are in a domain make sure the DHCP process
isn’t handing out the wrong NTP or what ever your DHCP source might happen to
be.
That’s all I can
I just use a serial to USB convertor and then the cable provided by Cisco. The
Keyspan WUSB line isn’t bad and inexpensive.
On Mar 2, 2015, at 11:21 AM, Matthew Huff mh...@ox.com wrote:
Since Newer PC laptops and all Mac Laptops no longer have a serial port, what
are people using to
Depends on what your application is and how much you control the network and
hardware selection. If you have the choice to use only 5GHZ gear you can
switch now. If you have to support random equipment and in a more public
setting then it will be a while, there are still 2.4GHZ only devices
Good morning,
I have recently been exposed to some of the ASR hardware for the first time and
while I’m well versed in standard IOS I haven’t done much work with XR. Can
anyone suggest a good pointer for getting up to speed. I’m most specifically
interested in the new policy construction and
Thank you for the pointer, really appreciated
On Dec 16, 2014, at 10:59 AM, Warren Jackson wrjack1...@gmail.com wrote:
http://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-2/routing/configuration/guide/b_routing_cg42crs.pdf
On Tue, Dec 16, 2014 at 10:49 AM, Scott Granados sc
in no time.
On Tue, Dec 16, 2014 at 10:49 AM, Scott Granados sc...@granados-llc.net
wrote:
Good morning,
I have recently been exposed to some of the ASR hardware for the first time
and while I’m well versed in standard IOS I haven’t done much work with XR.
Can anyone suggest a good
+1 on the VZW card. I’ve used both this card and other VZW data delivery
devices with good success. LTE is quite fast especially if you can connect on
the UMTS band with your device. I tried the VZW card before XLTE was rolled
out so can’t speak to whether this works or not but I have used
I’m wondering if you need a no proxy arp on your interface. I don’t see it in
the included config.
On Dec 12, 2014, at 11:03 AM, chris tknch...@gmail.com wrote:
Hello,
We have a small site we inherited that is still on ADSL on legacy sprint in
the northeast.
The ILEC is using aal5snap
A soft reset will do the trick. The issue is you need to reprocess the routes
based on your new route-map but you don’t have to completely clear the session.
Route refresh will take care of this so a clear soft should do the trick.
On Dec 2, 2014, at 9:01 PM, CiscoNSP List
Make sure that each router know’s about the other routers interfaces and can
reach the next hop. I’m betting that router A can’t reach a given network via
router B because A can’t get to B’s next hop. You have to make sure that /30
is distributed in to each somehow either via IGP or BGP
Carefully as apposed to what, recklessly press the tab with a hammer?
;)
On Sep 11, 2014, at 10:12 AM, Drew Weaver drew.wea...@thenap.com wrote:
In the instructions for removing a network module from a 3560x it states
'carefully press the tab on the right side of the module'.
I can't seem
If you have the old 25 pin mod tap that comes with the console cables you can
use that which converts you to RJ45 and then you can use your normal 9 pin on
the other end. Else you need a regular null modem type cable which are readily
available. As someone else mentioned, if you’re using a G1
What about powering your cameras and such with POE so you don’t have different
grounds via the power cable at the camera end and at the building end. This
way you provide power from the remote source and have everything on a more
common basis.
Even though your camera might not have a specific
This problem sounds a lot like a dissimilar grounding issue. Sounds like a
potential between buildings is causing problems. I don’t know if this is
feasible but a common ground might solve some of the problems.
On Aug 18, 2014, at 10:20 AM, Sander Steffann san...@steffann.nl wrote:
Hi,
Well let’s be current, most POTS providers run the wire as little as possible
meaning they deploy a remote terminal to the neighborhood and then just run the
cables from that point to the homes etc. Even there you have gas discharge
cans on each punch down that protect the shelves. I’ve had
If you’re running windows you might try http://tacacs.net.
Thanks
Scott
On Jul 30, 2014, at 3:15 PM, Andrew Wentzell awentz...@gmail.com wrote:
On Wed, Jul 30, 2014 at 3:01 PM, Rich Lewis rle...@sis.tv wrote:
And if so, is there a way (that people are happy implementing) to get
TACACS+
I don’t think equipment vendors are scared by the idea of software networks
because they are participating in that space in a big way. Look at what Cisco
is doing or Juniper for that matter with contrails. I haven’t worked with the
Cisco virtualized objects but I have used Junipers VFirefly
So this is not a stupid question at all. I’ve wondered about this myself. I
suspect the reason your terminal slows is the CPU spikes when adding a new
neighbor and the session establishes. (I could be wrong that’s just a guess)
In my case I never had the slow down problem so I would cut and
So for a little more clarification on this, I would want to monitor say ingress
on my transit links and then ingress on say my input links from my server farm
ports and capture the data that way instead of monitoring ingress and egress on
the same transit only interfaces? So in other words
Hi,
First, thanks for all the great input on analyzers and their strong and weak
points. It looks like from the comments I’m going to give nfsen a shot.
My followup question concerns selection of interfaces and the direction
to monitor. While googling I find that almost all examples I
Good morning,
I’m starting to work with Net Flow data and am looking for both good
background documentation to get more familiar and suggestions for an analyzer.
I already have data collection working so I’m looking for suggestions for
something to turn that data in to something
+1 on the EX 4200.
Good, configurable with VC cables or optics for bundling in to a chassis over a
larger physical area, decent horse power and decent features.
On Dec 9, 2013, at 11:19 AM, Doug McIntyre mer...@geeks.org wrote:
On Mon, Dec 09, 2013 at 05:17:58PM +0200, Mark Tinka wrote:
On
I can’t think of any reason to use more than 1. If you have a meshed network
and announce space to the public network then you need a real AS. For your
application if you’re using provider space and just looking for redundancy with
in the DC you could get away with using a private AS. I
Another +1
Open DNS is a great work around and allows for easy management in the event you
wish to block further sites.
On Nov 14, 2013, at 10:40 AM, Pablo Lucena pluc...@coopergeneral.com wrote:
You can do something like this on a 1841:
class-map match-any BLOCKED-WEBSITES
match
RANCID is your friend here. Available for most platforms and lets you script
what ever you need.
On Oct 31, 2013, at 8:02 AM, Ahmet Uncu uncuah...@gmail.com wrote:
Hello all,
I need to configure about 300 cisco routers/switches same time. Could
you offer me a free software that can do
This is correct, in your set up, the customer learned route is not the best
route. If you want to preserve the prepends I would increase the pref of your
learned customers so you install them as the most preferred.
Thanks
Scott
On Jul 29, 2013, at 6:53 PM, Adam Greene maill...@webjogger.net
Wondering if anyone has any good suggestions for a tool for creating and
managing complex regular expressions? I'm especially looking for a good way to
generate / expand the members of a complex expression or to do a diff and
generate a expression from that diff. Any pointers would be most
PM, Nick Hilliard n...@foobar.org wrote:
On 25/06/2013 20:44, Scott Granados wrote:
Wondering if anyone has any good suggestions for a tool for creating and
managing complex regular expressions? I'm especially looking for a good
way to generate / expand the members of a complex expression
Honestly, I wouldn't use network statements and simply tag everything through
static or connected redistribution and communities. Allows you more
flexibility later and requires little more understanding up front but you'll
be better off down the road.
something like
router bgp abcd
no sync
Hi list,
Quick question, on a cisco CRS what is the lowest / shortest BFD interval that
can be set? Is 10MS possible and or what are the minimum settings that are
able to be configured?
Thanks
Scott
___
cisco-nsp mailing list
filters automatically across both C and J's devices.
Your thoughts about an ASA implementation are also on the mark.
THanks
Scott
On Mar 21, 2013, at 4:30 PM, Justin M. Streiner strei...@cluebyfour.org wrote:
On Thu, 21 Mar 2013, Scott Granados wrote:
Just a general question for the group. Has
Just a general question for the group. Has there been announcements of Cisco
supporting BGP Flowspec in IPV4 and IPV6 on any of their platforms? My
understanding is that it is not yet supported but wondered if there was any
update to this.
Thanks
Scott
So more specifics are sort of a sledge hammer approach. If you announce more
specifics over one link, assuming a prefix that long is widely readvertised,
you'll reroute all the traffic not just have a small effect. (more specifics
always win) (also it's bad form to not announce unified
You know, this is probably a question that could be directed to nanog.. I
haven't noticed anything here but I have them in a more secondary capacity.
Thanks
Scott
On Nov 28, 2012, at 7:23 PM, harbor235 harbor...@gmail.com wrote:
Can anyone shed some light on the Level 3 issues ? I see the
I could be smoking crack here so I apologize if I'm wrong but doesn't the local
Telco provide clock on all T1s that you can recover? Even in the case where
you're providing PRI service doesn't the local loop the carrier provides
contain line clocking that you can recover?
What am I missing?
I second this, I think that point to point links make for the best connection
type in this use for all the reasons mentioned ands also for the simplicity.
There's something to be said for keeping the core (and network) as simple as
possible as long as the functionality is there. I don't see
The only problem you're likely to have is with your wallet if you buy Cisco
branded optics.:)
Others may disagree but I have never had any problem with 3rd party
transceivers in lots of products including the 2900 series.
On Jul 25, 2012, at 2:02 PM, pamela pomary ppom...@gmail.com wrote:
I'd have to second this, the 1841 is a pretty good way to go and you can pick
them up sec on hand inexpensively.
Non Cisco you could check out Mikrotik if you want some decent features on an
extreme budget but in all things, you get what you paid for. If you need
reliability I'd stick with
I Second that, Ryan has helped me get unwedged on many ASA issues. (including
one similar to yours) Much appreciated!
On Jul 5, 2012, at 1:19 PM, Scott Voll wrote:
Thanks. Perfect command. I was able to find the wrong Cert and fix it.
you rock Ryan.
Scott
On Thu, Jul 5, 2012 at
What about something like fixed orbit that gives you a ranked listing. THere's
probably sources of this data that are in more easily available for so you
could write scripts but that might give you a starting point. I'm not sure how
good the data is but it should be at least a rough starting
You have an MTU mismatch.:)
THis is my guess anyway because it really matches closely your issue.
I ran in to this with almost the same set up using larger MTU sizes for the
ethernet + tags. I had to use the IP MTU command under the actual interface
(or subiff depending) and set to 1500.
You
Gee and I thought LSD was for the operator and not a feature. Nice, no reason
the gear shouldn't share in the fun.
:)
On Apr 25, 2012, at 11:10 AM, Peter Rathlev wrote:
On Wed, 2012-04-25 at 09:44 -0500, Aaron wrote:
Is there something similar in IOS to lsd (label switch db) found in
IOS
make this even better. Now I know - MPLS!
Chuck
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Robert E. Seastrom
Sent: Wednesday, April 25, 2012 1:32 PM
To: Scott Granados
Cc: cisco-nsp@puck.nether.net
Subject: Re
It's all about RANCID.
Easy, very easy to modify and just works. That's my opinion anyway.
Thanks
Scott
On Mar 2, 2012, at 2:57 PM, Erik Sundberg wrote:
Quick question/poll
What is everyone using for router/switch/firewall config backups?
Is rancid still the one to use?
Thanks
to provide
configuration support.
-Original Message-
From: Scott Granados [mailto:sc...@granados-llc.net]
Sent: Thursday, February 23, 2012 2:02 PM
To: Bill D'Anjou
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] Megapath frame relay question Ok, few points.
FIrst, yes, Megapath
Ok, few points.
FIrst, yes, Megapath is going to assign you a 172.16 address to your wan
interface. This is a pretty standard Covad / Megapath thing.
Next, when I've done this is memory served I had to use a dialer interface for
the actual interface and bind that to a sub interface using a
Remember that pref is non transitive.
If you could, could you do a show ip bgp prefix and paste the output?
Then we might be able to expand more.
Thanks
On Jan 31, 2012, at 3:42 PM, John Brown wrote:
Hi,
I'm suffering from driving spreadsheets instead of routers.
Have a customer that has
So I'm not sure where to start with this one, any pointers would be
appreciated. I'd be happy to google but I'm not sure what the condition is
here at all, I'm pretty baffled.
Here's the setup.
A Single 7200 with an NPE400 and a few fast E interfaces. I have two metro
Ethernet pretty
Depends on the traffic type, packet sizes and what features you have
enabled. Can you detail the port configurationa bit more?
-Original Message-
From: Manaf Al Oqlah
Sent: Monday, October 03, 2011 9:47 AM
To: Group Study ; cisco-nsp@puck.nether.net
Subject: [c-nsp] Maximum traffic
Sounds like what you want is the anyconnect client. You can have your users
browse to a URL and install the clients that way instead of having to push
out pcf files. Infact I believe this is the preferred method. You can also
control group access or have groups available from a pulldown.
I'd have to second this!
Also and this may be a preference thing but JunOS in general is easier for
me to connect with mentally for some reason. I think it's just because
there's so much BSD under the hood and it just feels more natural in terms
of operating and configuring. You have to be
I think you're mixing apples and oranges a bit.
Do you mean the BGP session would come up and not stay up?
If so you need to do a
show ip bgp neighbor a.b.c.d | inc data
and view the mss size, make sure that packets of that negotiated size can
pass over the link. What you'll see in this case
Honestly, community tags might be the best in combination with route maps.
Something like
route-map transit-out perm 10
match community 15
yada yada yada
The basic answer to your question though as far as I know is that this
should be fine. You would be using the route-map to control your
Hi, I’ve been googling and finding a lot of matches but none of them seem to
have a definite solution or at least none that have worked so far. Wonder what
I’ve missed or if anyone has some good ideas.
Here’s the background. I have a Cisco 1841 router with 2 fast E interfaces
configured, one
It's all about rancid.
Will do exactly what you want to do and can be scheduled right in cron.
-Original Message-
From: Ambedkar
Sent: Tuesday, September 13, 2011 3:10 AM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] Routers and switches backup tools..
Hi,
Is there any free
Hi,
I have the following basic setup.
I have two different upstream paths one over ethernet which will not show a
down interface if there's a failure. I am wanting to use object tracking on an
1800 series to remove the default route in the event of an upstream failure. I
built the IP SLA
Just gave this a shot, no go.
All I have is
track 1 ip then the option route
no sla here
when selecting route it wants to have me add a route in cidr form with /
notation.
On Sep 12, 2011, at 1:07 PM, Peter Rathlev wrote:
On Mon, 2011-09-12 at 11:16 -0400, Scott Granados wrote
Some say that he wears a suit and never shows who's under the helmet and
continuously pushes playing cards with the picture of Rubins Barriccelo through
his desk fan!
Other's say that he moon lights as a mild mannered Network Engineer familiar
with the finer points of routing and switching.
Are the Cisco books (I believe this is a Cisco press book if memory serves)
available in electronic form or different formats for we who can't use
standard print?
-Original Message-
From: Vitkovsky, Adam
Sent: Tuesday, August 23, 2011 5:22 AM
To: Scott Granados ; cisco-nsp
is not available for all
books however the one you list below is available from the link above.
On 08/23/2011 01:36 PM, Scott Granados wrote:
Are the Cisco books (I believe this is a Cisco press book if memory
serves) available in electronic form or different formats for we who
can't use standard print
Hi,
Have the following problem. I have a Cisco 7200 NPE-400 (yes I know
seriously outdated) running 12.4-25C that has two BGP peers delivered over fast
E. It’s pretty garden variety. The only real different from stock config bits
I have are the hold in queues on the interfaces boosted
Hi,
The topic of tuning the network for BGP route exchange has been on the list
lately and I’ve been doing some googling but not finding anything that really
seems to fit what was discussed here. Does anyone have any pointers (either
7200 NPE-G1 specificor non router specific) that they can
Are you process switching traffic instead of fast or CEF?
-Original Message-
From: Chris Gotstein
Sent: Monday, August 22, 2011 4:08 PM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 7206VXR NPE-G1 Upgrade from 12.4 to 15.0 High CPU
Backed down to SRE, but still seeing high
Go with option A, community tags are your friend. It also removes the need
for any network statements in your config thus reducing the work in the long
term.
Something like this
ip prefix-list customer-prefixes seq 5 permit a.b.c.d/19
ip prefix-list not-to-specific seq 5 permit 0.0.0.0/0
] BGP question : What's the best way for filtering
outgoingprefixes?
On Thu, 18 Aug 2011, Scott Granados wrote:
Go with option A, community tags are your friend. It also removes the
need
for any network statements in your config thus reducing the work in the
long
term.
You'll probably still
In what configuration does an NPE G1 load tables in under a minute?
I haven't seen one load a full table in anywhere near sub 1 min.
G2 yes, G1 really?
-Original Message-
From: Saku Ytti
Sent: Wednesday, August 17, 2011 7:54 AM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] BGP
1 - 100 of 294 matches
Mail list logo