Re: Stus-List Stus list Soft shackle

I put some of that white vinyl over my baby stay to get it to pass over.Bill Coleman  Original message From: David Knecht via CnC-List Date: 2/17/2016 8:43 PM (GMT-05:00) To: CnC CnC discussion list Cc: David Knecht

Re: Stus-List Landfall 38 Atkins & Hoyle hatch seals

Measure twice cut once. And yes I do mean half inch, and I think it was a CH more. Or less. Now I'll have to pull that out and measure it again because I know it was around a half an inch, certainly not 3/8. Bill Coleman  Original message From: Dreuge

Re: Stus-List Landfall 38 Atkins & Hoyle hatch seals

I have a roll of 3/8, I could send you some for shipping. I have the larger Atkins Hatch, the cord for that seems to be around 10 mm. I don’t have a roll of that. Bill Coleman C 39 Erie, PAanimated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dreuge via

Re: Stus-List Nav Station Panel and Volt Meter Recommendations

I used Starboard with that kind of pebbled finish. Not like your setup, tho. Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jake Brodersen via CnC-List Sent: Monday, February 15, 2016 1:30 PM To: cnc-list@cnc-list.com Cc: Jake Brodersen

Stus-List ProFurl Spinex

Well, PHRF-LE just allowed a foot extension for A-Sails with no penalty, so, I see a new stemhead fitting with a foot long bow roller in the future for the Coltrek. Has anyone had any experience with these Profurl Spinex spinnaker furlers with the roller balls on the torsion rope? And

Re: Stus-List ProFurl Spinex

, NC cenel...@aol.com -Original Message- From: Bill Coleman via CnC-List <cnc-list@cnc-list.com> To: cnc-list <cnc-list@cnc-list.com> Cc: Bill Coleman <colt...@verizon.net> Sent: Thu, Feb 11, 2016 4:06 pm Subject: Stus-List ProFurl Spinex Well, PHRF-LE j

Re: Stus-List Old C factories on Google Street View

The saying goes, “ If you want to make a small fortune, take a large fortune and start a boat Shop.” Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ryan Doyle via CnC-List Sent: Monday, February 01, 2016 7:24 PM To:

Re: Stus-List DC distribution panels

Not sure what your panel looks like, but it can look good to just get a blank sheet black starboard or delrin and mount the Blue Sea onto that. That ‘s what I did, looks great. They make great stuff. Bill Coleman C 39 Erie, PAanimated_favicon1 From: CnC-List

Re: Stus-List 1980 C Headliner Panels

Are you talking about the cover panels that you remove to get at bolts? Bill Coleman C 39 Erie, PA -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of sthoma20--- via CnC-List Sent: Monday, January 25, 2016 9:22 AM To: cnc-list@cnc-list.com Cc:

Re: Stus-List 1980 C Headliner Panels

-List 1980 C Headliner Panels Yes. Bill Coleman via CnC-List <cnc-list@cnc-list.com> wrote: > Are you talking about the cover panels that you remove to get at bolts? > > Bill Coleman > C 39 Erie, PA > > -Original Message- > From: CnC-List [mailto:cn

Stus-List Barient 28ST on EBay

http://www.ebay.com/itm/151961260637?item=151961260637 ==mtr Bill Coleman C 39 Erie, PAanimated_favicon1 ___ Email address: CnC-List@cnc-list.com To change your list

Re: Stus-List Looking for Hatch Hinge for A C 24 '77 model

Take the hinge off and have a weld shop build up the missing aluminum, then cut/grind/sand to original shape, and drill new holes. Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Wolfe via CnC-List Sent: Tuesday, January 19, 2016 2:09

Re: Stus-List Raymarine e-Series Chartplotters/MFDs

Mike, what is this auto dimming of which you speak? I have the e series, and must adjust manually. I cannot find anything in the manual about an auto dimming feature, and it is quite annoying, as when turning on in the morning after being dimmed at nite you cannot see anything on the screen,

Re: Stus-List Source for Sturgeron?

From: Bill Coleman via CnC-List <mailto:cnc-list@cnc-list.com> Sent: Friday, January 8, 2016 10:30 To: cnc-list@cnc-list.com Cc: Bill <mailto:colt...@verizon.net> Coleman Subject: Re: Stus-List Source for Sturgeron? Thanks for that link Rick, I didn’t realise you could ga

Re: Stus-List Name plates

Check With Vanna, I am sure she can help! Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell via CnC-List Sent: Wednesday, January 13, 2016 4:46 PM To: C List Cc: Gary Russell Subject: Re: Stus-List Name plates OK, so now I'm in

Re: Stus-List VHF / AIS

Just hang in there, I am sure next year they will have it in 2000 NMEA. Heaven forbid they do all this at one time. When I bought my 2150, I was cursing them for not putting the gps in it, and of course, why do that when they can put it in a couple years later and push everyone into an

Re: Stus-List Engine Room Original Paint

It wasn’t outlawred until ’78, so there is probably a good chance, unfortunately. Bill Coleman C 39 Erie, PAanimated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of bobmor99 . via CnC-List Sent: Tuesday, January 05, 2016 8:56 PM To: cnc-list@cnc-list.com Cc:

Re: Stus-List winter condensation

BTW, compressed air dryers like those made by Van-Air use salt pellets over which the air passes. The water drips down and is drained out the bottom. I believe there is also calcium chloride in it too, and maybe some secret ingredients, but if you had a bucket with holes in the bottom and a

Re: Stus-List Source for Sturgeron?

Thanks for that link Rick, I didn’t realise you could game the system like that, the last time I tried that it didn’t work. Maybe it is because, as someone mentioned, that they actually source it out of UK. Interesting. One other note, even tho I want the Sturgeron for variety, I regularly

Re: Stus-List What's a Loud Hailer?

Yes,  like a hailing horn.  If it is like those from the 60's , you can also listen through it.  I actually have one,  just never installed it.  Couldn't see something to tacky on a boat I raced. I got my first SH in 2000 after returning from an ICW trip to FLA with a power boater

Re: Stus-List C Nameplate

Beautiful ! You may have a future there - ! Seems like you should have the + on there, as the 37 is a completely different boat. Regards, Bill Coleman C 39 Erie PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell via CnC-List Sent: Tuesday,

Re: Stus-List Bilge pump switch

I have the water witch, & my primary water is from the mast also and I have never had a problem - Bill Coleman  Original message From: Ted Drossos via CnC-List Date: 01/02/2016 11:15 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Ted Drossos

Re: Stus-List Automatic bilge pump switch help

Don't know how big the hose is, but smaller would leave less to drain.  I also   have an electronic switch,  - it is pumped through a Whale diaphragm pump,   which doesn't seem to allow much drain  back. It is also not high volume,  so an additional centrifugal pump is also helpful.  Bill

Re: Stus-List Sydney Hobart Race

True,  several years ago a Benetau 47 next to me almost sank out in the Lake due to a recent faulty bow thruster install.  Bill Coleman  Original message From: "Dennis C. via CnC-List" Date: 12/27/2015 12:44 PM (GMT-05:00) To: CnClist

Re: Stus-List New beer can Genoa

Actually,  that can end up being much more expensive.  I know.  Bill Coleman  Original message From: Rick Rohwer via CnC-List Date: 12/25/2015 3:24 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Rick Rohwer Subject: Re:

Re: Stus-List Folding prop for 30-1 with A4

I am surprised you don't have ten different suggestions already. So I will just tell you to get yourself a nice 2 blade Flex-O-Fold and don't look back. Hard to go wrong there. Bill Coleman C 39 Erie, PA -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf

Re: Stus-List Lines led forward

MY layout – SB, Spinnaker and Jib halyard on mast, Main and Cunningham led back to clutches. Port, Spinnaker led back to clutch, also a cam cleat on mast. Mostly bear away sets. Jib halyard at mast, rarely used. Main Outhaul, Vang, & first reef also led back to cockpit. As someone mentioned,

Stus-List 2 Cyl Yanmar

Here is a cute little Yanmar that just popped up on my screen. Maybe it would have similar feature/dimensions as some marinized engines. Was probably for off road equipment. . . http://www.mckeanmachinery.com/inventory/product-detail.php?item=BW8455 Bill Coleman C 39 Erie, PA

Re: Stus-List Wabasto furness

Look at all those knock off hoverboards, blowing up like Pintos! Personally, I would get the Wasbasto. If, when you get it, it sez, ‘Made in China’, then I don’t know what to say . . . Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Fred

Re: Stus-List Jumper Batteries

Does anyone know if these are Lithium ion or Lithium Polmer, and if there is any advantage of one over the other? I know from my RC Plane that the LiPo batteries can catch on fire! A friend brought one of these around once when my Jetta Diesel battery went stone cold, and it didn’t give it

Re: Stus-List Vacation Options -- Not C Related, But Sailing Related

Look for a place that rents Hobies or similar. My Girls / Husbands and I rented some at the Bitter End, had a few races, it was a blast. Little squall came through, flipped them over, they had fun flipping them back– One of the many highlights . . .. Bill Coleman C 39 Erie, PA From:

Re: Stus-List Update: Re: Keel attachment issues on a C 25

<<) please feel free to scold me :)>> OK, with that license, Ahmet, for chrissakes, quit pussyfooting around and just buy the right washer for the job! 91122A140 Just get some of these washers that McMaster has kindly put in stock for you, and

Re: Stus-List Winterizing the Holding Tank

Absolutely. Plus, once that smell permeates your boat, it will be obnoxious I even try to keep mine as empty as possible during the year. Regards, Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht via CnC-List Sent: Friday, November 20,

Re: Stus-List Changing oil filter Yanmar 3gmf

One neat trick I learned at a diesel clinic is, slide a gallon zip lock up around the filter & then unscrew it letting it drip into the bag, then drop the filter into the bag and seal. Bill Coleman C Original message From: Indigo via CnC-List

Re: Stus-List Hydrolocked!

Well you are indeed a lucky duck - Congrats on dodging a expensive bullet! Bill Coleman C 39 Erie, PAanimated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of davepulaski via CnC-List Sent: Monday, October 26, 2015 3:41 AM To: cnc-list@cnc-list.com Cc:

Re: Stus-List Replacing Windows

I had also read of SCS2000 being used as a structural adhesive for skyscraper windows, and also I am pretty sure Lexan. So, As an experiment I glued two pieces of Polycarbonate together with SCS2000, let it sit for a month, and pulled them apart. Unfortunately, it didn’t take a whole lot of

Re: Stus-List Pump out fitting

I bought mine through a place that sells hoses to equipment operators and belts, etc. Glass filled Nylon, I think. Tractor supply sells them also for 5 bucks. http://www.tractorsupply.com/tsc/product/gator-lock-quick-coupler-1-1-2-in-p art-f?cm_vc=-10005 Also R/V Supply places. Not sure if my

Re: Stus-List Hydrolocked!

That sounds seriously bad. I would be worried if the water was in there 10 minutes. I know I am not making you feel any better. Could you remove the injectors and crank it to blow it out? Bill Coleman C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of

Re: Stus-List Sale Tools

If is sounds too good to be true, it usually is! Bill Coleman C 39 Erie, PAanimated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Monday, October 19, 2015 10:07 AM To: cnc-list@cnc-list.com Cc: Paul Fountain Subject: Re:

Re: Stus-List stainless polish

Joe – If you heated your pulpit up to the temperatures that parts of the grill get to, it too would likely stain. Elevated temperatures in SS lead to Chromium Carbide Precipitation – the chrome has an affinity for carbon, which then becomes chromium carbide, and that leaves much less chrome to

Re: Stus-List Commercial Foul Weather Gear

jacket. Joel On Wed, Oct 14, 2015 at 10:44 AM, Bill Coleman via CnC-List <cnc-list@cnc-list.com> wrote: I have a Gill jacket that I am less than pleased with, the arms soak right through. I sprayed it with some waterproofing, but still not too happy with it. Â Fisheries Supply is r

Re: Stus-List rebedding hatch

When I re-bedded mine, (twice) I used 5200. Right now a pack of angry wolves want to jump all over me for saying this, (BUT DON’T!) because it works for me. The reason I used 5200 is the rails get stepped on sideways quite often, and I want it to be a structural part of the cabintop, not just

Stus-List Commercial Foul Weather Gear

I have a Gill jacket that I am less than pleased with, the arms soak right through. I sprayed it with some waterproofing, but still not too happy with it. Fisheries Supply is running a sale this week, does anyone have any experience with this brand? Or maybe it would be too hard to be

Re: Stus-List Diesel Fuel Additives?

No, it's all low sulfur. Green just tells the cops that you paid the road tax. Surprising , Truck diesel here is 2.69, and at our club (Red Boat Diesel) is $2.03. Put Bio-Bore additive in always. Or it will turn Black! Bill Coleman C 39, Erie From: CnC-List

Re: Stus-List Autopilot Recommendations

To Rick's question, I have no idea why the old ones worked, they may have been designed to simply follow a compass course, but I think that from the four thousand on they were designed to have feedback from the runner position sensor. I know mine was worthless until I put it in. A

Stus-List Pair of Barlow 32ST

Currently at 1,000 , I think these have the same bolt pattern as the Barient? http://www.ebay.com/itm/171958683577?item=171958683577 ==mtr Bill Coleman C 39 Erie, PAanimated_favicon1

Re: Stus-List IPad Question...

I just installed a GX2200 VHF with GPS, belowdeck, works perfectly.  As Fred mentioned,  the receivers on these are not your father's receivers.  OK, maybe l'm paraphrasing a little .One fellow on cruising forum  said he had one functioning in a pilot house of aluminum. But my note 4

Stus-List Darwins List

Who in their right mind would take a Container Ship, of all things, into a known, sitting Cat 4 Hurricane? Container ship hit by Hurricane Joaquin lost, Coast Guard searching

Re: Stus-List Darwin’s List

that the container ship either couldn’t turn around in time or that it was not safe in port? Any merchant mariners on the list? Steve Staten Langley, OK, USA “C’est La Vie” C 27 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Friday, October 02

Re: Stus-List Trucking to Georgian Bay

Ditto on removing the Instruments AND any part they sticks up over 13' The worlds smartest man had the presence of mind to remove his chartplotter from the pod above the binnacle, but not the Pedestal Guard with the custom made Pod. To paraphrase Richard, "It's really something to see your boat

Re: Stus-List Raymarine plotter upgrade

I am REALLY looking forward to dynamic laylines – Just installed an e series, (Thanks Fred!) but I can’t get all the slick stuff yet, till I install the Raymarine Depth/Speed Transducer and Anemometer – NMEA 0183 from my old B won’t cut it. Am waiting to be hauled out for that. I am impressed

Re: Stus-List GFCI Outlet

This is true, and That is where I got mine, but I don't think they cost 27 bucks - I did this this summer, and it took a few tries to find one slim enough, and at that I had to file off some plastic on the edges. C used the tiniest boxes they could find. Bill Coleman C 39 Erie Subject:

Re: Stus-List boat names

There was a boat here named AJA, and I said to him, "You must be a Steely Dan Fan," and he said, "No, I just couldn't get the name off !" Then a husband and wife, both Doctors, named their boat "PARADOX" Bill Coleman C 39, Erie PA

Stus-List Another Barient 32ST

But only one. He also has a 37ST http://www.ebay.com/itm/231689868266?item=231689868266 ==mtr Bill Coleman C 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Wednesday,

Re: Stus-List NMEA 2000 cabling

I am confused as well, I have not figured all the nuances out with the Raymarine, but I understand the Navionics takes sounding data and uploads for the common good. Found this on their site, does this mean it transfers date to your mobile device, then to them? navionics.com Press release

Re: Stus-List Windows laptop for chartplotter?

Drag Queen for both by Active Captain Bill Coleman C 39 Erie PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Kevin Driscoll via CnC-List Sent: Wednesday, September 09, 2015 1:06 PM To: cnc-list@cnc-list.com Cc: Kevin Driscoll Subject: Re: Stus-List Windows laptop

Re: Stus-List Barient ST 32's

Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Sep 4, 2015 4:55 PM, "Harry Hallgring via CnC-List" <cnc-list@cnc-list.com> wrote: Bill, EXACTLY what I'm looking for!! Harry Sent from my iPhone On Sep 4, 2015, at 16:24, Bill Coleman via CnC-List <cnc-list@cnc-list.

Stus-List Reporting when entering Canadian waters

Just when we thought the US Border Patrol was making things miserable – http://www.npr.org/2015/09/01/436525751/canada-enforces-pleasure-boat-reporting-requirements Actually, coming back from Canada this year the USBP were very co-operative, I called them, they took all info on the

Stus-List Barient ST 32's

border ..apparently he thinks we Canucks are a big threat to our southern neighbors...or he wants to keep you guys is. Rob Abbott AZURA C 32 - 84 Halifax, N.S. On 2015-09-04 10:21 AM, Bill Coleman via CnC-List wrote: Just when we thought the US Border Patrol was making things mis

Stus-List Star PHRF

Here in Erie it is 153 for our JAM fleet. I am half owner of #6868 with my Trawler buddy, who races it. It is the second Star for both of us. Last year when he first started in the C fleet, he was killing them, and I heard comments from the race committee (who didn’t know what a Star was) like,

Re: Stus-List Autopilot steering

Is your prop shaft offset so it can be removed past the rudder? Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Knecht via CnC-List Sent: Wednesday, August 26, 2015 1:44 PM To: CnC CnC discussion list Cc: David Knecht Subject: Re: Stus-List

Re: Stus-List SOS light flare replacement

Not till I sawr that this morning as well, and I couldn't buy one of them fast enough. So happy to not have to worry about those darn flares anymore. Now I will have to worry about having extra C Batteries on the boat, tho . . . Bill Coleman CC 39, Erie PA From: CnC-List

Re: Stus-List Autopilot steering

be why. If so, I guess that would explain the pull. Dave Aries 1990 CC 34+ New London, CT On Aug 26, 2015, at 2:02 PM, Bill Coleman via CnC-List cnc-list@cnc-list.com wrote: Is your prop shaft offset so it can be removed past the rudder? Bill Coleman CC 39 From: CnC-List

Re: Stus-List Was Wire Gauge, now Where can I get LED?

We also use them on Night races to light the Windex. As long as you know everyone in the fleet is using them for that purpose it is not confusing. I don’t know what other boats think, but there are usually not too many of them. Bill Coleman CC 39 Erie, PA From: CnC-List

Re: Stus-List ...Now lighting configurations...

Agreed, but for our night races there are never more than a few other boats not racing, which would be weekend warriors that I am sure don’t even know anything beyond red and green anyways. Very little commercial traffic, not like LIS. But you are correct, it is not kosher. I don’t think

Re: Stus-List ...Now lighting configurations...

My original masthead light WAS a strobe. No solid, no nothing. Screwed up my VHF reception. Not sure why those were ever used . . . Bill Coleman CC 39 Erie PA. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Donnelly via CnC-List Sent: Monday, August 24, 2015

Re: Stus-List New Sails for Alera

How Old? Still have its original shape? Bill Coleman CC 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Friday, August 21, 2015 9:42 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Re: Stus-List New Sails for Alera

Re: Stus-List Subject: Was Wire Gauge, now Where can I get LED?

Another POV, I have heard a lot of discussion about this over the years, both ways, (White vs. Colored) but just a month ago I replaced several lites using Marinebeam. I talked to the fellow there about colors, and he told me using a white light behind a colored lens only allowed around 30% of

Re: Stus-List New Sails for Alera

Ha ha - Reminds me of Foghorn Leghorn. https://www.pinterest.com/pin/292734044504512014/ Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent: Friday, August 21, 2015 10:33 AM To: CNC CNC Cc: David Subject: Re: Stus-List

Re: Stus-List Rust stains and welding

Just a thought, When I did my major refit, I made mounting plates that matched those on the rear pulpit, welded studs onto the plates that poked through the plates and were threaded on both ends. Those plates then become permanently attached to the boat. Then I just pushed the pulpit over the

Re: Stus-List Atomic 4 Raw Water Intake Clogging 1976 38

Not sure where Joe is, but that would help. I just had to clean out my refrigeration system again - Zebra Mussels. There is nothing but brown scum in the strainer, because I have moth balls in there, and nothing lives there anymore, but the Zebra fry pass right through the 50 micron strainer and

Re: Stus-List Atomic 4 Raw Water Intake Clogging 1976 38

Coleman via CnC-List cnc-list@cnc-list.com wrote: Not sure where Joe is, but that would help. I just had to clean out my refrigeration system again - Zebra Mussels. There is nothing but brown scum in the strainer, because I have moth balls in there, and nothing lives there anymore, but the Zebra fry

Re: Stus-List Electronics Upgrade

now that I'm missing one paddle on my speed transducer, true wind speed is skewed rather dramatically depending on whether I am going to weather or running because of how it in interpolates the direction you're going with the wind speed. You will be happy you went with the speed

Re: Stus-List 34+ lower intermediate shrouds

They both appear to take a very slight bend in the last 4 or so. No kink or anything,  just a slight bend. Is this right, or is there a potential problem with the toggles in the mast? I don’t have rod rigging, but I do know wire, and that is not good. It looks like it is not very tight, or

Re: Stus-List new topic mast height CC 30 MKI

IIRC, that was a Hinckley,  60 some feet  Bill Coleman  Original message From: Don Wagner via CnC-List cnc-list@cnc-list.com Date: 08/10/2015 9:12 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Don Wagner don.wag...@verizon.net Subject: Re: Stus-List new topic mast

Re: Stus-List Off topic Windows 10

Or this, More than 14 million devices http://blogs.windows.com/bloggingwindows/2015/07/30/windows-10-the-first-24-hours/?utm_source=twitterfeedutm_medium=twitter are already running Microsoft’s Windows 10 after its global launch

Re: Stus-List filters

With my old tank, before I started using Biobor my diesel was always dark and dirty looking. Starting out with a new tank in 2005, and using this, it is always clean and red, and no clogged filters. I am a fan. Regards, Bill Coleman CC 39 Erie, Pa From: CnC-List

Re: Stus-List Summer Cruise, Speed and Sticky Situation

My BG speed has been erratic, slow readings or none - discovered a missing fin on the paddle wheel.  Bill Coleman CC 39 Erie(with an incredible light show out over the lake over Canada) Original message From: Graham Collins via CnC-List cnc-list@cnc-list.com Date:

Re: Stus-List hypalon glue

Demaree has some repair parts, don't know if they are any better than what you already have, but they are great people. http://dibboats.com/inflatable-boat-parts/patches-rings.html http://dibboats.com/inflatable-boat-parts/cements.html Bill Coleman CC 39 Erie, PA From:

Re: Stus-List Exploding CC

it. Steve Thomas CC27 MKIII Port Stanley, ON - Original Message - From: Bill Coleman via CnC-List cnc-list@cnc-list.com To: cnc-list@cnc-list.com Cc: Bill Coleman colt...@verizon.net Sent: Tuesday, July 21, 2015 17:47 Subject: Re: Stus-List Exploding CC And then you have

Re: Stus-List Exploding CC

And then you have this. Not a CC, a Nelson Marek I believe - http://www.simcoereformer.ca/2015/07/17/sailboat-catches-fire-sinks-on-lake- erie Draw your own conclusions. Bill Coleman CC 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts via

Re: Stus-List CC 37+ Repower -- Ugh

Edd, Just curious if you had to destroy your old engine and send them proof of that. My buddy just ordered a 75 HP Beta from NC and B4 they would ship if from England, he had to remove the head, drill a hole through the cylinder wall, and send several pix to them, Something to do

Re: Stus-List head question-lubrication

I remember reading on one of the cruising forums to use Baby Oil. Tried that, and now my Skipper really feels like the rubber in the pump is galling. (plus, yes, it probably puts a coating in the holding tank) I went back to the Thetford lubricant, and it works good after that, but It doesn't

Stus-List FW: Boom out haul slide question

Not sure what boat you are talking about, but I got disgusted with mine probably 15 years ago, and scrapped the whole boom; It had a SS slide in the aluminum which galled and was just really poorly designed compared to today's products. I got an extrusion and end fittings from Charleston Spars,

Re: Stus-List Damage to fibreglas

Polyester resin doesn’t stick too well to anything except uncured polyester resin. That’s why Gougeon’s recommend epoxy for fiberglass repair. Well, that, and they sell it, of course. https://www.youtube.com/watch?v=tMVCwhz_hY4 Bill Coleman CC 39 Erie PA From: CnC-List

Re: Stus-List CC 37+ Repower -- Ugh

I like this better - https://www.youtube.com/watch?v=r0yXqU-w9U0 Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Pennie via CnC-List Sent: Wednesday, June 24, 2015 8:38 PM To: cnc-list@cnc-list.com Cc: John Pennie Subject: Re:

Re: Stus-List CC 37+ Repower -- Ugh

Do the Beta and get whatever is the 37.5 HP engine. It is just the right size for mine and your size boat. You may now have the option of a computerized control, Not available when I bought mine. I replaced my Perkins 107 and the Kubota engine is great. Mine was marinized by Nani, but pretty

Re: Stus-List Stanchion Legs For Gates...

Dave, Maybe they are too busy to be bothered right now, B/C it appears they do have them, http://southshoreyachts.com/product-category/cc-parts/page/3/ Regards, Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List Sent:

Re: Stus-List Darker Smoke, Harder to Start

(Disclaimer -no expert! )I use synthetic in my diesel car and truck,  and would on the boat as well if not for the way that moisture tends to accumulate due to the way we use them. The very short runs encourage condensation, so it of course gets changed every fall like most everyone does.

Stus-List Cool idea for matching wood shades

http://www.woodworkingnetwork.com/woodworking-project-photos/how-to-wood-plans/custom-builder-education/How-To-Oxidize-Teak-Using-Martin-Goebels-Tanning-Bed-Method-304708271.html Bill Coleman  Original message From: Nate Flesness via CnC-List cnc-list@cnc-list.com Date:

Stus-List CC 40 Prop Shaft

A friend is in need of replacing his shaft on an 83 CC 40, would anyone have an idea of the length? I believe it is the original Yanmar. Another friend who is replacing it would like to be able to do a quick swap out while it is hanging in the slings rather than removing, measuring, waiting,

Re: Stus-List Spinnaker pole storage

Jim Egloff at 716-525-3228 or email j...@rcryachts.com Regards, Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Sunday, April 26, 2015 12:54 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Spinnaker pole storage

Re: Stus-List Spinnaker pole storage

I have a carbon pole on the mast, I wouldn't do it any other way. It is so slick to deploy, and completely out of the way.  Bill Coleman CC 39 Original message From: svpegasu...@gmail.com via CnC-List cnc-list@cnc-list.com Date: 04/24/2015 5:03 PM (GMT-05:00) To:

Stus-List FYI 5200

A real find, I think - just discovered tubes of 5200 at Lowes for only 12 bucks. Might not be at every store, but . . . Bill Coleman CC 39 Erie PA ___ Email address: CnC-List@cnc-list.com To change your list preferences, including

Re: Stus-List TefGel - was 1976 CC 38 Electrical Panel

Jamestown Distributors,  and Teff Gel is what they use on planes.  Bill Coleman  Original message From: Rick Brass via CnC-List cnc-list@cnc-list.com Date: 03/12/2015 9:51 PM (GMT-05:00) To: 'Dennis C.' capt...@gmail.com, cnc-list@cnc-list.com Subject: Stus-List TefGel -

Re: Stus-List Non-Slip

I hope you have experimented. I bought some of that Gibco rubber 10 years ago, and experimented using Polyisocyanate Paint thickened with Colloidal Silica. I couldn't get it to fill in all the little tiny pyramids, and gave up and used a roller, which came out looking great. Not quite as

Re: Stus-List Need help from a fellow Cnc listers in Florida

I have a 1” shaft, 44” long. Propeller shaft. About 2 ½” long keyway, I think they are all ¼” key Regards, Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Wednesday, February 18, 2015 5:26 PM To: Bruno Lachance; CNC boat

Stus-List We've Hatched a Deal on Hatches - Up to 35% Off MSRP - Lewmar, Vetus, Freeman, Beckson

All this talk about ports and hatches - don't know if they are cheap or not. http://www.fisheriessupply.com/promo/hatch-sale-2015?utm_source=Fisheries+Su pply+Mailing+List http://www.fisheriessupply.com/promo/hatch-sale-2015?utm_source=Fisheries+S

Re: Stus-List Just Another CC Cruising Blog

It doesn’t sound so much like you are a lousy cretin, as you are a lazy Drunk! I am just kidding of course, you should make him sand the bottom by himself for that comment! Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Peter via CnC-List Sent:

Re: Stus-List Helm seat / boarding ramp

Very Cool - A self-storing Med-Moor Ramp! Bill Coleman CC 39 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Monday, February 02, 2015 11:27 PM To: CNC boat owners, cnc-list Subject: Stus-List Helm seat / boarding ramp To see my new

<    4   5   6   7   8   9   10   >