Hi,
During the spring cleaning i found an openmoko holder with a belt clip.
[1,2,3]
If someone is interested, i am happy to send it to you, if you pay the
postage and package costs.
( bitcoin is fine, and SEPA too )
I am living in Delft, the netherlands, (europe) so the closer you are,
the
Hi All,
Wikipedia [1] has the gta04 marked as cancelled, perhaps someone can
bring that page up to date?
Kind regards,
Ed
[1] https://en.wikipedia.org/wiki/List_of_open-source_mobile_phones
___
Openmoko community mailing list
On 01/31/2016 01:07 PM, Christ van Willegen wrote:
On Sun, Jan 31, 2016 at 11:17 AM, Ed Kapitein <e...@kapitein.org> wrote:
Wikipedia [1] has the gta04 marked as cancelled, perhaps someone can bring
that page up to date?
[1] https://en.wikipedia.org/wiki/List_of_open-source_mobile_
On Mon, 2015-03-16 at 08:31 +0100, Matthias Apitz wrote:
Hello,
I saw on the net a video about the BQ Aquaris E4.5 Ubuntu phone:
https://www.youtube.com/watch?v=CR4baLQmU0s
(english 40min)
Jono Bacon, former Ubuntu Community Manager, shares a video with a
detailed review and demo of the
SNIP
Interesting.
Makes me curious why you both spend money on that one instead of e.g. the
GTA04A5?
Any answer is valid - and no need to be polite…
I am just curious to understand how people think and decide such things in
March 2015.
BR,
Nikolaus
Hi Nikolaus,
A couple of
On 01/22/2015 06:55 PM, Robert 'Bobby' Zenz wrote:
Hello everyone.
Does somebody know if it is possible to retrieve the contacts of the
phone in QtMoko so that they can, f.e., be send via SSH to a remote
system for backup?
snip
Hi Bobby,
If your contacts are stored on the phone you could
On 01/22/2015 09:11 PM, Robert 'Bobby' Zenz wrote:
Hello.
Thank you. The contacts are on the SIM card, I already tried
talking with it but my tries were a little unsuccessful and resulted
in the modem/SIM not answering at all and locking up. My assumption was
that that was because I tried to
Hi All,
I took a model A raspberry pi [1] a tft screen [2] and a Arduino gsm
shield [3] to create a mobile phone [4]
It was a fun experiment to do, and in the end it did gave me a phone i
can use.
Unfortunately, it became so big and heavy, that it is more something to
put on your desk as a
On 05/17/14 04:25, Nick wrote:
Hi all,
I haven't been using my phone much recently, but it's always been
reasonably reliable when I have. Today I turned it on, and all day
it has just said searching for network. I haven't moved, and I'm
in an urban enough place that I don't think it's plausible
On 05/10/2014 05:23 PM, Francesco De Vita wrote:
If you think this is something you would like to try, please let me
know, so i can provide you with the kernel and the rootfs image for you
to flash.
You need to write some scripts to fit everything to your needs, so i
hope you have some scripting
On 05/07/14 14:46, Francesco De Vita wrote:
You could use the freerunner as a SMS gateway, you don't need a screen
for that.
That is something i use, i can send a text message and perform some action
(switching lights on or off )
Or have a text message send to my other phone if a long running
On 04/18/14 06:36, robin wrote:
Hi,
unfortunately I the screen of my old GTA02 has stopped working (all white
apart from a bit of pixel garbish at the bottom, also directly after
booting). Now I know that you can get a replacement for about 80EUR. Even
though this is still an option it is a
On Sun, 2014-03-02 at 13:31 +, robin wrote:
Hi,
I would like to be able to access some programs in qtmoko faster, so my
question is: Is there either a way to
to run an app directly when you press the aux button
and if so, how can I distinguish the length of a press (I know that
Hi Nick,
Thanks for the change in tone, for me it was more then welcome.
I have been to the USA with my FR and had no problem whatsoever in
connecting to the network, also the gprs worked just fine.
I did bought a USA sim card on ebay, just to cut the costs.
I traveled California, Nevada,
Hi Radek,
Thanks a lot!
i am still on the old 2.6.29 kernel ;-)
Will try it out soon.
Can you tell a bit more about your GPS problem?
Is there no output coming from cat /dev/ttySAC1 ?
Does it work with the older kernels?
I m not running qtmoko and the gps is runing fine.
Kind regards,
Ed
On
On 11/14/2013 12:17 AM, matteo sanvito wrote:
Hi ed,
I don't know about your first question, while about the second one,
try to change to after ...STAT1)
I'm glad to see that there is someone other that still uses gta02 :')
Best regards,
matte
Hi Matteo,
Thanks for your reply!
Could
Hi all,
I have a few questions:
-1 When i try to start Radek's buildhost i get:
./start.sh: line 2: 371 Real-time signal 0 qemu-system-arm -M
versatilepb -kernel vmlinuz-2.6.32-trunk-versatile -initrd
initrd.img-2.6.32-trunk-versatile -append root=/dev/sda1 -hda
squeeze.img -redir
Hi Jeff,
I would like to have another GTA02, but please feel free to give it to
anyone who need it more than i do.
Kind regards,
Ed
On 10/14/2013 08:23 PM, Jeffrey Ratcliffe wrote:
My GTA02 has been sitting around for too long without attention.
The battery has discharged completely and I
On 09/11/2013 04:42 PM, Kim Vandry wrote:
Hello,
SNIP
Uncompressing Linux... done, booting the kernel.
[0.575000] Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(0,0)
Qi claims to be setting the command line as follows:
loglevel=2 console=tty0
On 08/22/13 23:11, Sebastian Krzyszkowiak wrote:
So what? Those are still phones. Working, functional phones which have
much better specs than GTA02. User wants a free phone, user orders a
free phone, user gets a free phone. Without the need of owning GTA02
and replacing motherboard by himself
Last price:$122.74499
:-D
On Tue, 2013-05-21 at 11:08 +0200, Patryk Benderz wrote:
[cut]
I have an older USA model i can sell, i am looking for around 120 USD or
1 BTC.
Say what? 1 BTC is worth 120 USD now?
___
Openmoko community mailing
On 05/20/2013 06:23 PM, Joseph Armbruster wrote:
I am new to openmoko and looking to take the first step and buy a COTS open
hardware stack. I browsed through this list:
http://wiki.openmoko.org/wiki/Distributors
* GP2X does not appear to have cell phones (from what I could see)
and
* SDG
Hi Alexey,
Try one of the dealers listed on:
http://wiki.openmoko.org/wiki/Distributors
Kind regards,
Ed
On 05/19/13 07:23, Аlexey wrote:
Sell me a gta device, please.
___
Openmoko community mailing list
community@lists.openmoko.org
Radek, again, thanks for all the hours you put in to it, it is really
appreciated !
Kind regards,
Ed
On 05/16/2013 09:52 AM, Radek Polak wrote:
On Wednesday, May 15, 2013 05:32:15 PM Patryk Benderz wrote:
well, i just hope Radek earned a lot for selling this domain ;)
The story is quite
Hi all,
Doest anyone know of a bitcoin client that will run on our beloved FR?
Kind regards,
Ed
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
SNIP
the kernel, boot loader etc.
If you have ideas how to stimulate demand, please do!
Nikolaus Schaller
Hi Nikolaus,
Thanks for your great and continued work on the GTA0x.
Wouldn't it be nice if the GTA04 could be a showcase for the upcoming
Ubuntu phone?
I think the Ubuntu phone
On 03/08/2013 08:45 PM, Fox Mulder wrote:
Am 06.03.2013 14:21, schrieb Ed Kapitein:
SNIP
The lack of pairing also means a lack of encryption, you have to judge
the impact of that yourself.
Thanks for these instructions.
But the problem is that i want to pair the freerunner with my tablet
where i
On Wed, 2013-03-06 at 13:42 +0100, Fox Mulder wrote:
Am 05.03.2013 18:43, schrieb Fox Mulder:
Am 05.03.2013 15:08, schrieb Neil Jerram:
Fox Mulder quakem...@gmx.net writes:
Hi,
is it possible to use my gta02 as a gps mouse for another computer?
I got a cheap tablet without
Hi All, ( specially the dutch users ;-) )
Today the dutch government has send a test alert message[1], a cell
broadcast.
This is used to inform people about a major incident in a certain area.
Did any of the dutch people receive such a message?
Do you have any info/logs/whatever?
Kind regards,
I like proposal 8, but i think the chain should be broken
one open link, to free the project from the past.
On 01/14/2013 06:09 PM, Adrien Dorsaz wrote:
Hello,
So I voted for proposal #5 and #6. I wanted to give a precision for the
proposal #5 : I'd prefer his variant b with phone colored
On 01/04/2013 04:02 PM, robin wrote:
hi
I somehow messed up my routing, so I can no longer access the internet/router
from my freerunner (ping 192.168.0.200 works 192.168.0.1 (router) doesn't
anymore).
Now I thought as long as I can log in via ssh from my desktop I could still
access
Hi Nikolaus,
Congrats on this *great* achievement!
And good to see that the price is coming down on the next batch of GTA04's
Enjoy your Christmas holidays, you earned it!
Kind regards,
Ed
On 12/18/2012 09:44 PM, Dr. H. Nikolaus Schaller wrote:
Please read the full text here:
On 12/17/2012 05:59 PM, francesco.dev...@mailoo.org wrote:
Hi list
Sadly to say, my GTA02 is going to retire. It is having too much
troubles to be used as a daily phone and I'm thinking to replace it.
The perfect candidate is the GTA04 but I can't afford its cost right now.
I didn't follow
Hi Gennady,
I hope to find some time this Christmas to take a look at the SD card code.
It seems that your code at [1] is no longer available.
Is there a new place where i can find your code?
Any info on what you have discovered so far, hints, tips, tricks?
Kind regards.
Ed
[1]
On 12/10/12 21:48, Boudewijn wrote:
On Monday 10 December 2012 00:59:16 francesco.dev...@mailoo.org wrote:
Add to this some strange GSM/modem behaviour: whenever I get low GSM
signal for certain time, I have to restart the Neo because I loose the
phone functionalities (cannot
Very nice!
Could he post a photo of a standard case next to the alu case, just to
get an idea on how big it has become? ( front and side pictures would be
nice)
Hats off to him!
Kind regards,
Ed
On Fri, 2012-12-07 at 11:41 +0100, Radek Polak wrote:
Hi,
in june i posted pictures of my 3d
Hi Robin,
If you run pppd with the nodetach and debug parameters manually, you
will get quiet a bit of information about which authentication protocols
are tried.
You need to set up a connection file in (default in /etc/ppp/peers)
with the details about the connection.
And a chat script to
Hi Thomas,
If i read the page right, the price is *between* 10 an 1000 dollar a piece.
I hope they sell it to you for 10 USD !
Kind regards,
Ed
On 10/22/2012 05:29 PM, Thomas HOCEDEZ wrote:
Hi, I found this one :
On Fri, 2012-10-12 at 00:11 +0200, David Garabana Barro wrote:
O Xoves, 4 de Outubro de 2012, Timo Juhani Lindfors escribiu:
David Garabana Barro da...@garabana.com writes:
I've read about http://docs.openmoko.org/trac/ticket//2349, but it
should
be fixed in qtmoko's 2.6.34, isn't
Hi Davide,
Try (re)starting udev (or mdev) and see if you get any info.
Kind regards,
Ed
On 09/27/2012 11:17 AM, Davide Scaini wrote:
Hi all.
I asked on shr user list with no luck.
I'm using shr-core, I have this problem: the device for the
microsd is not created, i.e. /dev/mmcblk0p1 does
On 08/24/2012 08:09 PM, robin wrote:
hi all
I wanted to have the new anki 2.0 flash cards on my GTA, but it always
complained that it the system was not set to UTF8. In the end I succeeded by
running dpkg-reconfigure locale but since then my fonts are very large (not
everywhere but on most
Hi, could you post the command you used to scale and play the movie?
Kind regards,
Ed
On 07/01/2012 08:59 PM, Timo Juhani Lindfors wrote:
Radek Polak pson...@seznam.cz writes:
Freerunne has hardware switch for changing resolution to 240x320. But after
switching you will get the strange
On 07/02/2012 07:20 PM, Timo Juhani Lindfors wrote:
Ed Kapitein e...@kapitein.org writes:
Hi, could you post the command you used to scale and play the movie?
http://lists.openmoko.org/pipermail/community/2012-June/067176.html
Thanks, i did read that mail, but looking at the command line
Many thanks!
Very helpful commands in that script.
Kind regards,
Ed
On 07/02/2012 07:39 PM, Timo Juhani Lindfors wrote:
Ed Kapitein e...@kapitein.org writes:
Thanks, i did read that mail, but looking at the command line, the
stream is dumped on stdout right?
Yes. I typically do
mplayer
On 05/18/2012 02:27 PM, Travis Bachelder wrote:
Ok, So I took your advise (Benjamin Deering). Used Neotools, wow: what
a powerful tool, thank you very much... But, I think I did something
wrong. : /
_*This is my problem:*_
My first attempt: I tried flashing the FR (NAND) with QI, Kernel, and
Whooo Joerg,
take a beer!
I'm sure people are unaware of this, so it is good to explain it to them.
Don't take it personally, your help is really appreciated.
Kind regards,
Ed
On 05/06/2012 06:45 PM, Joerg Reisenweber wrote:
openmoko inc. isn't handling anything openmoko.org related, since
On 03/06/2012 04:10 PM, Dr. H. Nikolaus Schaller wrote:
we are coming close to the dream of getting unlimited availability
of new and compatible cases!
Thanks to the great work from Lukas I simply ordered a set
of case components at Shapeways and they already arrived
today.
SNIP
Today i
On Sunday, April 15, 2012 15:50:00 Radek Polak wrote:
On Sunday 15 April 2012 12:33:47 e...@kapitein.org wrote:
Somewhat unrelated:
I found that suspending by echo mem /sys/power/state sometimes fails and
hangs the FR. (on a 2.6.34 Kernel, on a 2.6.29 kernel it works fine )
Do you or
What is phranky?
phranky is a phone/SMS application written from scratch in c.
the gui uses Xlib.
What can you do with phranky?
* Start a phonecall
* Receive a phonecall
* Send a textmessage
* Receive a textmessage
What does it look like?
check out the video at [1]
Why phranky?
For most of the
On 04/02/2012 08:49 PM, Matthias Apitz wrote:
El día Monday, April 02, 2012 a las 08:32:51PM +0200, Jiří Pinkava escribió:
Hi,
after umout is the filesystem broken? I have experience where are writen
some pseudorandom data, which overiwrite even forst sector (after
restart disk partition
On 03/18/2012 02:25 PM, Mayeul Kauffmann wrote:
Le dimanche 18 mars 2012 à 14:34 +0200, Timo Juhani Lindfors a écrit :
I used another GTA02 to make audio notes and a cheap and small digital
camera to take photos. As long as all clocks are synchronized you can
combine all the data with your
Hi Robin,
One of the things i do before starting navit is:
if test -f ~/.navit/destination.txt; then
rm ~/.navit/destination.txt
fi
if test -f ~/.navit/center.txt; then
rm ~/.navit/center.txt
fi
With that i never have a hanging navit, without it it takes *forever*
to start and eat the whole
Hi Arslan,
A while ago i tried to write a software modem to communicate between 2
freerunners.
One of the things that went wrong was a 90 degree phase shift in the
audio signal.
So when you write audio software, please keep in mind that it might get
phase shiffted.
Kind regards,
Ed
On
Hi All,
Probably Off Topic, but for the ARM hackers among us, this [1] looks
very promising.
Kind regards,
Ed
[1] http://www.raspberrypi.org/faqs
___
Openmoko community mailing list
community@lists.openmoko.org
Best wishes for everyone and may the GTA04 be a smash hit in 2012!
Kind regards,
Ed
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On 12/30/2011 06:59 PM, Gerald A wrote:
On Fri, Dec 30, 2011 at 9:12 AM, Dr. H. Nikolaus Schaller
h...@goldelico.com mailto:h...@goldelico.com wrote:
The other strategy is the one taken by Apple. They have a very low
marketing budget compared to other companies. And the media are
That sounds great!
Would this mean that someone can build a dedicated Xorg-server module
for the glamo?
Or was all this already a public secret through the leaked documents?
Kind regards and a happy new year,
Ed
On 12/27/2011 09:46 PM, Martix wrote:
Hi,
I just found link to SMedia Glamo
1.5 support and DRI compatible MPEG4 decoding. Linux kernel
have compatibility issues with some SD cards, which can be
workarounded by setting lower glamo_mci.sd_max_clk. Don't know whether
is it HW or SW problem.
Best Regards,
Martix
Dne 28.12.2011 19:31, Ed Kapitein napsal
On Friday 16 December 2011 00:39:36 fdvj...@vodafone.it wrote:
Il 15/12/2011 22:57, Boudewijn ha scritto:
On Thursday 15 December 2011 22:23:56 Timo Juhani Lindfors wrote:
fdvj...@vodafone.it writes:
experience, during a day of usage, several freezings. I mean, when it
1) What kernel?
big +1 !
On 12/15/2011 06:29 PM, Griera wrote:
On Thu, 15 Dec 2011 16:00:34 +0100
Radek Polak pson...@seznam.cz wrote:
Hi,
also navit is now ported to qtmoko. Please check:
http://qtmoko.sourceforge.net/apps/qtmoko-navit.html
Nice. Thanks a lot!!
for install instuctions. It's still
Hi Robin,
I have something like this in my navit.xml:
speech type=cmdline data=/home/navit/scripts/say_it.sh '%s'/
and /home/navit/scripts/say_it.sh is a script that does some post
processing for speech,
but you can make it do anything i guess.
The %s is passed on to the script as command line
Hi Radek,
I want to build a kernel on the qemu buildhost, where can i find the
kernel sources you use?
kind regards,
Ed
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
on +/- 1200 Baud, using tc to control
the bandwith.
(without it the modem will lockup, like it does when using gprs sometimes)
Kind regards,
Ed
[1] http://wiki.openmoko.org/wiki/Manually_using_GSM
On 09/29/2010 09:19 PM, Ed Kapitein wrote:
Hi all,
I recently bought another freerunner and i have
On 08/03/2011 07:04 PM, omcomali@porcupinefactory.org wrote:
Hi all,
Last week I was unfortunate enough to have my Freerunner submerged in a lake
for a short moment. While I took out the battery immediately, it doesn't
quite work any more.
It spent about 10 secs underwater, and after a
On 06/02/2011 12:42 PM, Dmitry Shalnoff wrote:
Hello Everybody,
I have a periodically appeared problem with SD card writing/reading
functionality. I has several cards to try and found some correlation with
size and speed type of the card. '
Problems are appers when I'm trying to write
On 05/23/2011 07:24 PM, Phil Vandry wrote:
On Wed, May 18, 2011 at 03:19:16PM +0200, Eric Smith wrote:
Main application here is in a sea shipping container.
The key issues are RF communication (when in a GSM range of course)
and power management due to the long haul journey including journey
[1] https://github.com/gabrys/gta02-agps
:-)
On 05/24/2011 02:42 PM, Ed Kapitein wrote:
On 05/23/2011 07:24 PM, Phil Vandry wrote:
On Wed, May 18, 2011 at 03:19:16PM +0200, Eric Smith wrote:
Main application here is in a sea shipping container.
The key issues are RF communication (when
Hi Giacomo,
There might be something wrong with the libraries,
can you check with:
ldd /opt/toolchains/arm920t-eabi/bin/arm-linux-gnueabi-gcc-4.3
Kind regards,
Ed
On Monday 16 May 2011 14:44:31 giacomo 'giotti' mariani wrote:
and the -verbose option gives:
[...]
eval: 1:
Hi all,
In order to investigate my SD issues, i decided to erase my nand today.
That went well and NOR booting from the SD card worked fine too.
But when the phone went into suspend, it would not wake up again.
When pressing the power button the FR started to make a hissing noise.
removing the
On 04/24/2011 11:34 PM, Timo Juhani Lindfors wrote:
Ed Kapitein e...@kapitein.org writes:
So the question is:
Is there a part of the nand needed after the phone is booted?
What part of the nand might be needed when resuming from suspend?
The boot loader in nand is used also when you resume
On Tuesday 12 April 2011 10:34:38 giacomo 'giotti' mariani wrote:
Hello everyone,
[...]
We had problems with ubifs too. Gennady talked to ubifs devs and they
would like to see the kernel message and nandump so they could try
too look into it.
It seems that ubifs is not
Hi Nikolaus,
Just an idea:
handheld scanner for pets (veterinarian, animal rescue workers etc)
It could read the animals rfid chip and do a lookup in the database to show the
owner.
Kind regards,
Ed
On Monday 11 April 2011 09:59:38 Denis Shulyaka wrote:
Hi Nikolaus,
Great news!
Here in
On 04/01/2011 11:24 PM, W. B. Kranendonk wrote:
--- On Fri, 4/1/11, Ed Kapitein e...@kapitein.org wrote:
On 04/01/2011 05:20 PM, Gennady
Kupava wrote:
В Птн, 01/04/2011 в 17:00 +0200, Ed Kapitein
пишет:
On Friday 01 April 2011 14:52:02 David Matthews
wrote:
I had a few problems
Hi All,
I had a few problems with several uSD cards lately and i am trying to figure
out what is going wrong.
It used to be much more stable than it is now, i have massive file system
corruption on a weekly basis.
So i decided to downgrade to u-boot (was using qi) and back to an old andy-
On Friday 01 April 2011 14:52:02 David Matthews wrote:
I had a few problems with several uSD cards lately and i am trying to
figure out what is going wrong.
It used to be much more stable than it is now, i have massive file system
corruption on a weekly basis.
So i decided to downgrade to
On 04/01/2011 05:20 PM, Gennady Kupava wrote:
В Птн, 01/04/2011 в 17:00 +0200, Ed Kapitein пишет:
On Friday 01 April 2011 14:52:02 David Matthews wrote:
I had a few problems with several uSD cards lately and i am trying to
figure out what is going wrong.
It used to be much more stable than
Perhaps the date is suspicious ... ;-)
On 04/01/2011 09:19 PM, Kosa wrote:
However, the site has not been updated. No info about it yet. is
http://openmoko.org the right place to go?
Thanks again.
Kosa
El 01/04/11 13:15, Kosa escribió:
:D:D:D ¡qué chido!!
Thanks for keeping the
On 02/27/2011 02:27 PM, Πρεκατές Αλέξανδρος wrote:
Qi booted qtmoko from my sdcard in gta02 successfully .
Thank you for the detailed instructions.
Alexandros
Στις Κυριακή 27 Φεβρουάριος 2011 00:23:11 Ed Kapitein γράψατε:
Hi Alexandros,
Well, it seems good, the freerunner regonizes the card
, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
Στις Σάββατο 26 Φεβρουάριος 2011 01:14:02 Ed Kapitein γράψατε:
On 02/25/2011 10:08 PM, Πρεκατές Αλέξανδρος wrote
Thanks, that is it !
Kind regards,
Ed
On Friday 25 February 2011 08:42:01 Radek Polak wrote:
On Thursday 24 February 2011 12:24:03 Ed Kapitein wrote:
I use to be able to unbind the wifi card with the following command:
echo s3c2440-sdi /sys/bus/platform/drivers/s3c2440-sdi/unbind
any
On 02/25/2011 10:08 PM, Πρεκατές Αλέξανδρος wrote:
Having spend a day and some trying to boot qtmoko or shr trying different
combinations (bootloader+ distributions + partition scheme ) from two micro
sd card i own, without any success , and since the cards are accesible from
linux kernel
Hi all,
I use to be able to unbind the wifi card with the following command:
echo s3c2440-sdi /sys/bus/platform/drivers/s3c2440-sdi/unbind
any idea what the command is for the newer kernel (2.6.34.7-v31 ) ?
I did try several in the /sys tree, but to no avail.
kind regards,
Ed
Hi All,
I have had the same problem since i bought the freerunner, with all distros
(OM200x, gentoo, qtmoko)
The way i work arround it is by disabling the multiplexer and use the modem
directly.
That way i have a stable gprs connection.
And when i am done using the gprs connection i restart the
Hi Nikolaus,
What would be a good idea is to have a list with working functionality for the
device.
That would give people an overview on how usable the device is for a certain
task.
for example:
Yes No
can send SMS X
can make voice call X
working X server X
Hi all,
I have a hard time with an SD card that will give errors whne running
fsck, even right after an fresh mke2fs.
So i am trying to slowdown the glamo, but that does not seem to work with QI
acording to [1] i should work for nand in the same way as it does for sd
card partitions.
But that
:
On Sun, Jan 02, 2011 at 05:43:36PM +0100, Ed Kapitein wrote:
I have a hard time with an SD card that will give errors whne running
fsck, even right after an fresh mke2fs.
I have one of those too :-( The problem follows the μSD card, not
the Freerunner.
Any other idea on how to supply kernel
Hi Bernard,
You could debug it with the following command:
dbus-send --system --dest=org.freesmartphone.ogsmd --print-reply
/org/freesmartphone/GSM/Device org.freesmartphone.GSM.SIM.GetMessagebookInfo
Read message 1 with:
dbus-send --system --dest=org.freesmartphone.ogsmd --print-reply
On Sat, 2010-11-13 at 21:03 +0100, EdorFaus wrote:
On 11/08/2010 11:47 PM, Timo Juhani Lindfors wrote:
Ed Kapiteine...@kapitein.org writes:
Does anyone have pointers on how to address the hardware and its
registers etc?
I want to write the program in C and need a starting point.
I
Hi Nikolaus,
The story reads like a novel, with another cliffhanger every time:-)
Keep up the good work!
Kind regards,
Ed
On Sat, 2010-11-13 at 08:50 +0100, Dr. H. Nikolaus Schaller wrote:
Hi all,
time for another update.
Am 06.11.2010 um 12:35 schrieb Sylvain Paré:
Thanks for the
Hi All,
I am happily hacking on my FR and was toying with the wolfson.
I happen to notice that in order to get any sound from the earpiece i
had to switch on the Speaker Playback ZC Switch.
That switch is mentioned in the statefile, but i can't find it in any of
the diagrams on [1] [2]
Is there
On Wed, 2010-11-10 at 12:57 -0800, W. B. Kranendonk wrote:
--- On Wed, 11/10/10, Al Johnson openm...@mazikeen.demon.co.uk wrote:
From: Al Johnson openm...@mazikeen.demon.co.uk
The ultimate goal is to make a FR to FR modem
conection, using the GSM
voice band.
Why? Is this just to
Hi All,
I want to hack a bit on the Wolfson sound chip.
The ultimate goal is to make a FR to FR modem conection, using the GSM
voice band.
But the first step would be to generate a sine wave and feed it to the
wolfson chip.
I know i can use the alsa driver, but i would like to experiment a bit
Hi Thomas,
A bit far off perhaps, but an similar effort has been done for the Ipod
touch [1]
Perhaps there are lessons learned from that project.
Kind regrads,
Ed
[1]
http://www.ipodnn.com/articles/10/09/08/third.party.skin.adds.calling.texting
On Wed, 2010-11-03 at 10:28 +, Thomas
Hi All,
A while ago there was intrest in the MID of always inovating.
They seem to be shipping the devices as of today. [1]
So get them while they'r fresh ;-)
Kind regards,
Ed
[1] https://www.alwaysinnovating.com/store/home.php
___
Openmoko
On 10/26/2010 03:17 PM, W. B. Kranendonk wrote:
--- On Tue, 10/26/10, Andreas Fischer cyberf...@gmx.net wrote:
On 26.10.2010 12:14, Dr. H. Nikolaus
Schaller wrote:
How many new cases would you and your friends buy if
it costs:
* 20 EUR
* 50 EUR
* 100 EUR
* 200 EUR
(...) 20 Euros is
a
On 10/26/2010 05:05 PM, Dr. H. Nikolaus Schaller wrote:
SNIP
Hi All,
Since it seems so hard to have a custom made case, why not use an
existing case for a HTC, nokia, iphone or the like?
(or a chinese replica)
The layout of the PCB needs to be alltered ofcourse, but it seems that
it might
Hi Atilla,
I use t-mobile in holland and have good experience with them for GRPS
and normal GSM calls.
I had also a good experience in the USA with t-mobile, also with both
GPRS and GSM calls.
So you could give them a try.
Kind regards,
Ed
PS
i am in no way associated with t-mobile :-)
On
Hi Grennady,
I notice two times menu_1= , is that intenional or just a typo?
Kind regards,
Ed
On 10/21/2010 08:21 PM, Gennady Kupava wrote:
В Чтв, 21/10/2010 в 20:57 +0200, David Garabana Barro пишет:
Gennady
Is your 242-glamo-timings uboot ubifs capable?
I cannot boot qtmoko v28 with
Hi all,
From what i understand the doppler effect on the gsm signal limits the
max speed to +/- 250 Km/h.
So even with GSM coverage i doubt if it will be able to connect.
Kind regards,
Ed
On Mon, 2010-10-18 at 16:15 +0200, Dr. H. Nikolaus Schaller wrote:
Am 18.10.2010 um 16:05 schrieb Michal
Hi all,
I recently bought another freerunner and i have a plan with my
provider that will give me free calls between my family members.
Is there someone who ever hookup up two freerunners, using phonecalls?
I took a look at [1] that uses a linmodem, software only modem.
With this software you
1 - 100 of 217 matches
Mail list logo
