Redirected.
- Forwarded message from Saioa Perurena [EMAIL PROTECTED] -
Hola listeros:
Soy nueva en esto de Linux, y en las listas por las que andado siempre
aparecen hamm, bo, non-free,Se que tiene que ver con la instalacion
o distribucion pero no lo se.
Podria alguien decirme que
Amos a ver, resulta que tengo una Epson Stylus Color 600 (ESC/P2 y
blablabla) y quisiera configurarla al 100% en Debian.
Tengo los siguientes paquetes:
MagicFilter 1.2-21
lpr5.9-26.1
gs-aladdin 5.10-7
Bien, configuro el magicfilter de Debian.. y elijo
Mas cosas..
Resulta que me he instalado el:
tmview_96.05-3.deb
Que es un visor de DVI para svgalib (se supone).
Pues resulta que inicializo el tmview y se me queda frito con la pantalla
blanca y con una linea abajo muy poco sugerente que pone DVI PANIC, y a la
derecha
Bien.. esta es la pregunta.. como configuro el gs para que imprima
a
720x720 y a 1440x720 correctamente con una Stylus 600? (o con
cualquier
Epson Stylus ESC/P2)
Ya intentaste enviar el stcolor.ps antes del ficheiro que vas a escribir,
cuando usas el uniprint? En tu
Buenas,
¿Alguien podría decirme a qué se debe que a veces aparezca un mensaje del
núcleo que dice algo así como lo siguiente y cómo solucionarlo? Estoy con
el Linux 2.0.33 en un Pentium a 166 MHz y 64 Mbytes de RAM.
kfree of non-kmalloced memory: 00926b18, next= 02604000, order=67108866
(No me
On Wed, 13 May 1998, Enrique Zanardi wrote:
On Wed, May 13, 1998 at 11:02:02AM +0200, Martin Schulze wrote:
Hola listeros:
Soy nueva en esto de Linux, y en las listas por las que andado siempre
aparecen hamm, bo, non-free,Se que tiene que ver con la instalacion
o distribucion
On Wed, May 13, 1998 at 08:36:36PM +0200, Antonio Castro wrote:
No se si lo que voy a decir pueda sorprender o no.
Yo creo que en Debian se hecha de menos un documento en un lugar bien
visible donde se explique claramente lo que hay y donde esta.
Cuales sos las modalidades de insatalación
-BEGIN PGP SIGNED MESSAGE-
On Wed, 13 May 1998, Deibit wrote:
Resulta que me he instalado el:
tmview_96.05-3.deb
Que es un visor de DVI para svgalib (se supone).
Esa es la versión de hamm, y es un hecho conocido que no funciona.
[ Véase http://www.debian.org/Bugs ]
Hola a todos:
Lo primero, gracias a todos los que me habeis contestado a mis
anteriores preguntas. Es alucinante el grado de cooperación que hay
aquí... Espero poder algún día ser yo de ayuda para quien sea... :-)
Bueno, tengo un problema con irqtune. Uso Debian 1.3.1 más o menos
On Tue, 12 May 1998, Keith wrote:
: Cable modem down here in SotuhWest Florida cost about $35 per month.
: They put an ethernet card in your computer, but it is not bidirectional
: yet. You still have to dial in with a modem. So uploading is slow, the
: speed of the modem.
I want to write a
I tried to do what you are trying to do over the network. I finally took the
cd out of my win95 computer, installed the files via dselect, and then put
the drive back. After all the trying to get around it, that was the easiest.
It takes quite a while to load all the files to the machine.
--
To
I want to install xWindows using dselect. I do not know if I am using
dselect properly.
You could also take a look at the FAQ-O-Matic:
http://www.debian.org/fom/1.html. And be patient, this is the most
difficult thing for a newbie.
Leandro Guimaraens Faria Corcete Dutra
The
mouse is Microsoft (it says so on the outside) however when I set it up
in
W95 the program in the lower right hand corner says Microsoft
IntelliPoint.
This is the mouse with wheel -- the wheel is that round little
gray middle button
Right now I've tried to set it up with both
On Tue, May 12, 1998 at 04:23:25PM -0400, Will Lowe wrote:
Rather than running xdm all the time (nobody but me ever logs in, and I
can't remote Xdm into the machine because it's behind a firewall), I'd
like to simply write a script in my .bash_profile that determines if I'm
logged on from
On Tue, May 12, 1998 at 04:57:47PM -0400, Paul Miller wrote:
I accidently ran 'bl -S -d tty' (it should be: bl -S -d 125000 tty) on
tty1, and it frozen the console all the VCs -- I couldn't switch to
another VC, type anything, etc.. I was able to telnet it and kill the
shell bl was running
On Tue, May 12, 1998 at 05:01:01PM -0400, Paul Miller wrote:
How can I set the sound card mixer defaults (volumes, etc)? Each time I
login, my settings are reset.
I have an old Creative Labs SoundBlaster 16..
cam lets you set your volume levels from the command line, or from
a file. I
On Tue, 12 May 1998, C.J.LAWSON wrote:
/bin/cat :)
great kidder, now that cheered me up
thanks
Jonathan
I think I have the solution. Just run mandb.
elm# mandb
Processing manual pages under /usr/man/de...
Checking for stray cats under /usr/man/de...
I saw your reply to Bert Conliffe an was hoping you could give me similar
assistance.
:) I'll try. I'm only a newbie myself...
Personal background:
I've learned computers by sitting in front of them and struggling my way
through them. Currently I use WindowsNT at work with Lotus notes 4.5
Dear Greg,
1.) For the storage on this site, we have acquired an old Proliant RAID cabinet
and populated it with 7 4.1 gb drives (28 gb total) and we are dedicating 3 of
these drives to our ftp site. I am looking for a way (if it is possible) to
mount all
three of these drives at a single mount
Being a raw debian novice the following have tripped me:
When booting I get Unable to load charset 437. Where do I find it
and put it to quiet this error.
I tried to mount a partition as vfat in fstab and get an error
message. After login, I can mount the vfat without problems. fstab
requires the
On Tue, 12 May 1998, Shaleh wrote:
I am trying to enable 3 com ports -- two on board, the other is a modem.
onboard: com 1 irq 4
com 2 irq 3
modem: com 3 irq ??, with completely jumper options
The motherboard will only enable a com port, not let me change irq. I
have a
I've got a friend who has a corrupted his primary partition. He gets
an error message when he boots of an invalid superblock suggesting
that he run e2fsck -b 8193 /dev/sda1. I know that mke2fs makes
several backup copies of the superblock, but I'm unsure of where these
are placed. Are they
Good evening,
I'm having some stressful difficulties with some routing issues.
I've got a modem server with 16 modems on a Cyclades serial port box. I'm
trying to statically route six Ip addresses
(204.186.230.8/255.255.255.248) down one of those modems. I can do so,
but anytime the
Coudl someone tell me what ADSL is?
Thank you
ZORO
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Greetings,
I want to set up a small network using IP Masquarade over 2-4
phone lines, do I NEED eql, or can I set this up as two seperate PPP
connections and just let the machine route them independantly? Does this
cause any problems, or does it simply cause a less optimal use of the
I regularly get an error message in my xterm that says that an
application can't allocate the color map if, say, Netscape is already
running. Also xcolorsel won't run because it says that there are only 233
colors available where there should be 12000 or some other large number.
This is
R Chris Ross [EMAIL PROTECTED] writes:
RCR I regularly get an error message in my xterm that says that an
RCR application can't allocate the color map if, say, Netscape is
RCR already running. Also xcolorsel won't run because it says that
RCR there are only 233 colors available where there
M.C.,
You can mount all three drives at a single mount point if you use software
raid. For instance, you would just put sda sdb sdc all under md0, md0 then is
seen as one drive. The only problem is that you will lose about 1/3 of disk
space under RAID5. The good thing is that your data is
I have been battling xwindows for a few days now. Everyone has been very
helpful, but I am still not running.
I downloaded xlib6_3.3-4.deb and installed it using dpkg -i
xlib6_3.3-4.deb. I got an error when I did this, it is as follows.
ldconfig: warning can't open /usr/X11R6/lib/libICE.so.6 (no
Yo
I've got a friend who has a corrupted his primary partition. He gets
an error message when he boots of an invalid superblock suggesting
that he run e2fsck -b 8193 /dev/sda1. I know that mke2fs makes
several backup copies of the superblock, but I'm unsure of where these
are placed. Are
Hi,
Mario == Mario Olimpio de Menezes [EMAIL PROTECTED] writes:
Mario shouldn't the command line be: make-kpkg --revision 2 --zimage
Mario kernel-{image,source} ^ the target seems to
Mario be missing in the above and it isn't optional, is it?
Actually, it is. Hmm. The
Keith wrote:
I have been battling xwindows for a few days now. Everyone has been very
helpful, but I am still not running.
Stick with it! This is the hardest part of installation for everyone.
I downloaded xlib6_3.3-4.deb and installed it using dpkg -i
xlib6_3.3-4.deb. I got an error when
On Wed, 13 May 1998, Hamish Moffatt wrote:
Anybody got any way for a script to tell if
1) I'm logged onto the console
Well, if `tty` matches /tty\d/ is probably best.
Well, yes, except that I might be on from the console on /dev/tty3 ...
all I really care about is that I'm sitting
I'm trying to start an rxvt with an xpm background Everything's cool,
except that I have to run rxvt-xpm instead of rxvt (when did this
happen, BTW? It used to be different) However, I can't get a -scale
option to work. The best I can do is:
rxvt-xpm -pixmap /path/to/pixmap\;100x100
Which scales
Bravo! Couldn't have said it better myself! I seem to have the
same experience...several years experience with computers, and a
little programming, and a technical background in communications.
Unfortunately, Linux is not my full time job. Documentation
geared towards the novice user would be
On Wed, May 13, 1998 at 01:17:25AM -0400, Will Lowe wrote:
On Wed, 13 May 1998, Hamish Moffatt wrote:
Anybody got any way for a script to tell if
1) I'm logged onto the console
Well, if `tty` matches /tty\d/ is probably best.
Well, yes, except that I might be on from the console
Hello,
I'm in the process of installing and configuring 2.0 on a new machine,
so far everything looks good...
But xv seems to have a problem with jpegs, when I try to load one I get
the following message:
JPEG parameter struct mismatch: library thinks size is 672, caller
expects 456
Anyone with
On Tue, May 12, 1998 at 09:18:04PM -0400, Randy Edwards wrote:
I've got a friend who has a corrupted his primary partition. He gets
an error message when he boots of an invalid superblock suggesting
that he run e2fsck -b 8193 /dev/sda1. I know that mke2fs makes
several backup copies of the
On Wed, 13 May 1998, Jeff Garey wrote:
Bravo! Couldn't have said it better myself! I seem to have the
same experience...several years experience with computers, and a
little programming, and a technical background in communications.
Unfortunately, Linux is not my full time job.
On Wed, May 13, 1998 at 04:22:12PM +1000, Hamish Moffatt wrote:
On Tue, May 12, 1998 at 09:18:04PM -0400, Randy Edwards wrote:
I've got a friend who has a corrupted his primary partition. He gets
an error message when he boots of an invalid superblock suggesting
that he run e2fsck -b 8193
Jules Bean wrote:
Now, I can understand that a 486/100 is not the fastest machine around.
But I can't see why there should be a difference of about 2 orders of
magnitude between a 486/100 and a Pentium 133. Also - and tellingly -
in.telnetd is not taking up CPU time on the machine during this
Hi guys,
Today I have wanted to log in my system and I have received the message: Your
account has expired. Talk with your system administrator. Or something like
this. I've try to log as root, and received the same message. As I'm the system
administrator, where should I go now ?
My system
How do I do this ? When I boot from the rescue disk, it mount by default the
root partition and get the same messages. Somebody suggested to type the
init=/bin/sh
when get the prompt boot: from lilo. Lilo doesn't accept this. So, please be
more specific !
Thanks,
Ionutz
On Wednesday, May 13,
On Wed, May 13, 1998 at 09:57:51AM +0300, Ionut Borcoman wrote:
How do I do this ? When I boot from the rescue disk, it mount by default the
root partition and get the same messages. Somebody suggested to type the
init=/bin/sh
when get the prompt boot: from lilo. Lilo doesn't accept this.
Hello all!
A few days ago I have reported a strange problems with X server crashing
after segfault when using Lyx or Netscape. Just yesterday I've lost
a few hours of my work, after my wife asked me to find something in the
Internet, when I was writing an article. Therefore I've decided
to solve
Randomly, at times, my login screens fail to reappear
on any console after logging out on one console. All I have
found that works to make login screens appear is to reboot.
I am running a hamm system.
When the login screens fail to reappear, consoles do
not appear to do commands at
OK, this worked. So I typed at LILO:
linux init=/bin/sh
and the system booted as single user without asking for a password. After this
I've gave the command:
# mount -n -o,remount /
I have insued a passwd for the root and one for my regular user. It was ok, so
I have rebooted
is there an audio player supporting .ra (real audio) files?
neither sox nor nas knows this format.
Jens
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Wed, May 13, 1998 at 10:18:15AM +0200, Jens Lisner wrote:
is there an audio player supporting .ra (real audio) files?
neither sox nor nas knows this format.
There's an installer package for the (non-free) Real Video player, which
handles real audio.
Package: rvplayer
Priority: optional
Did you enable SCSI tape drive support in the kernel? I'm not sure if the
Debian kernel image has support for this compiled in or not.
Usually it's a loadable module, st
--
|||| ||| Marco Frattola Microsoft is not the answer
||`..'|| |||... Piacenza, Italy
Hi,
Does anyone know if it is possible to get a micrsoft mouse (the on with the
wheel) to act as a 3 button mouse? As under windows 95/nt the wheel can also
be used as a third button.
Regards
Graham
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
On Wed, May 13, 1998 at 09:48:12AM +0300, Ionut Borcoman wrote:
My system boot with loadlin and is hamm (frozen). Lilo doesn't want to work
as
my first primary partition is a vfat2 of 2Gb.
What's that got to do with anything? So is mine.
Hamish
--
Hamish Moffatt, [EMAIL PROTECTED], [EMAIL
Will,
I think Mr. Moffatt is on the right track. Won't `tty` actually be ttyp# if
you are connected via ethernet? Similarly, I think it will be different when
you are connected via serial port.
I've used: x = `tty | grep 'tty[012345]'` to do exactly what you are
asking about.
Ken
At 01:17 AM
-BEGIN PGP SIGNED MESSAGE-
There was a thread a while back about deleting weird files. Just for
people interest I had to remove some strange ones today. They were as
follows:
- -- 1 username users 0 May 2 1970 ??
- -- 1 username users 0 May
--On Tue, May 12, 1998 9:26 am -0500 Nathan E Norman [EMAIL PROTECTED]
wrote:
On Tue, 12 May 1998, Jules Bean wrote:
: Hi there...
[ snip ]
: Now, on the Pentium, everything runs nicely. On the 486, it can take
: 10-15 *minutes* to complete an ssl-telnet connection. It gets as far
On Wed, 29 Apr 1998, Oliver Elphick wrote:
poppy wrote:
While booting my debian 1.31 box with kernel
2.0.33, I see a failure to initialize my
ethernet card with an error code 2
Where can I find a translation of the
error codes or does anyone know what an error
number 2
Hi,
Thanks for the tips. Now, my system is working again. I've aded the
system users from a backup of the passwd. Mainly the mail, www-user,
etc. I just wonder about several things:
1. how do I test that everything is back to normal ?
2. how do I avoid things like this in the future ?
3. it
Everyone can relax on XDM - seems I managed to
introduce an error in the setup that caused the
problems. I had in my /etc/X11/xdm/Xservers file
a -bpp 16 setting that the server didn't like.
Now I need to figure out the proper mode lines and
settings to get it to work at 1024x768 -bpp 16.
I think I might need a windows manager. I have xwindows installed and
functioning, but when I go into it all I get is shell window. I installed
a couple of small programs but do not know how to start them. I am
assuming that I can start them by typing a command in the shell window,
but I don't
Ionut Borcoman wrote:
Hi,
Thanks for the tips. Now, my system is working again. I've aded the
system users from a backup of the passwd. Mainly the mail, www-user,
etc. I just wonder about several things:
good to hear its back up
1. how do I test that everything is back to normal ?
Thats
Hi,
Yesterday I've downloaded the new KDE beta 4. After some struggling, I
was able to start it. But, when I start EMACS, the text is all wrong (I
think it uses wrong fonts). The XEMACS works OK with fonts, but doesn't
like the .emacs and other lisp files that worked OK with EMACS.
Can somebody
Hi,
I just downloaded the latest package info for stable.
The new gzip in base depends on debianutils (=1.6) and the version
in stable is debianutils 1.5. I don't see the correct version of
debianutils in bo-unstable or bo-updates.
I heard debian had standardized on the 2.0.32 kernel headers,
I'm installing Debian on a notebook, and have to connect to several
different ISPs in different cities. I would like to use Xisp, but I
keep getting xforms not installed when dselect tries to configure it. I
can't seem to find anything but xforms0 and xforms-dev. Neither of them
seem to
Stephen Carpenter wrote:
Don't be stupid ;)what exactly that means well...ya got me
I have messed up my own system more than once
OK, you've got me wrong. How do I avoid this thing with loosing the
access. And without a warning !!!
About messing the system because of new packages, you're
Check out http://www.PLiG.org/xwinman/ for a listing of what is
available.
Each of the images goes to a review. Each review has links to the
screen shots.
Note that Enlightenment (E) has a completely user definable look called
Theme's. This means that Enlightenment, with the right Theme, may
In an article George Bonser [EMAIL PROTECTED]
| On Tue, 12 May 1998, Lazar Fleysher wrote:
|
|
| Coudl someone tell me what ADSL is?
| Thank you
|
| ZORO
|
| DSL means Digital Subscriber Loop.
[snip]
That's Line not Loop, and you can find out just about anything you
want to know about
Stephen Carpenter [EMAIL PROTECTED] asks:
hmm..is tehre a way to get that info from a working drive? I
would like to dump it to a text file and throw it on a rescue disk
There is a program /sbin/findsuper in the e2fsprogs package that
sounds like it might be what you want.
On Sun, 10 May 1998, Adam Keys wrote:
Kiyan Azarbar wrote:
Hi. I was wondering if anyone else had had this problem. It seems
really major. If I'm in console mode, then switch back to X with
alt-f7, and then move the mouse in anticipation of X showing up, it
very often crashes X. The
You probably want to use diald. diald sets up a dummy interface with the
route.
When an interface dies any routes tied to it are perforce removed. diald gets
around this by using a loopback interface. You could code something up yourself
but it would end up being diald (minus a few features
Why not make a test expression on emacs-version? For example:
(if (string-equal emacs-version 20.2.2) (print hello, 20.2.2 user))
Ionut Borcoman wrote:
Hi,
Yesterday I've downloaded the new KDE beta 4. After some struggling, I
was able to start it. But, when I start EMACS, the text is all
Someone was asking how to determine where the superblocks were ... I
deleted the original message.
At any rate, I use `dumpe2fs'. It'll tell you that, and more. The
first block of each group is a superblock, so you can either take the
Blocks per group, multiply by an integer, and add one, or
Can somebody give me a solution:
1. to make EMACS work OK with KDE
Play with the default font settings in KDE. Mine did this too, at first,
I changed the fonts around a few times, and now it's working fine. I
think it has to do partially with the difference between proportional and
A few days ago I have reported a strange problems with X server crashing
after segfault when using Lyx or Netscape. Just yesterday I've lost
a few hours of my work, after my wife asked me to find something in the
Internet, when I was writing an article.
unless you're using a very old version of
I don't like Windows, I suffer through it.
As for checking the supported cards list, I did and
the card I am using has support in the SVGA server. My
comment was that *I* need to figure out the proper
mode lines to get it to work.
I will assume the hostile tone of your reply is due
to
Will Lowe wrote:
Can somebody give me a solution:
1. to make EMACS work OK with KDE
Play with the default font settings in KDE. Mine did this too, at first,
I changed the fonts around a few times, and now it's working fine. I
think it has to do partially with the difference between
On Wed, May 13, 1998 at 09:25:03PM +1000, Chris wrote:
-BEGIN PGP SIGNED MESSAGE-
There was a thread a while back about deleting weird files. Just for
people interest I had to remove some strange ones today. They were as
follows:
- -- 1 username users 0
Chris [EMAIL PROTECTED] writes:
There was a thread a while back about deleting weird files. Just for
people interest I had to remove some strange ones today. They were as
follows:
- -- 1 username users 0 May 2 1970 ??
- -- 1 username users 0 May
On Wed, 13 May 1998, Bob Hilliard wrote:
Stephen Carpenter [EMAIL PROTECTED] asks:
hmm..is tehre a way to get that info from a working drive? I
would like to dump it to a text file and throw it on a rescue disk
There is a program /sbin/findsuper in the e2fsprogs package that
Gregory 2.) I don't think that this one is possible, but here goes:
Gregory We are using a real IP address from the company that we
Gregory work for, and are wondering if there is a way to create a
Gregory virtual network using IP Masquerade or some such. For
Gregory example, a browser
Yo-
I need to purchase a modem for a Debian box and I was wondering if anybody
had a suggestion. I know to stay away from WinModems but they are
rapidly becoming less conspicuous so I want to be sure I don't get one.
Any suggestions are appreciated!
-Ian
I will assume the hostile tone of your reply is due
to translation to English rather than intent. If it
was intent, please step back, take a deep breath and
relax. The lists are for *everyone* to get help and
if you can't suffer the sometimes idiotic questions
and problems people have (or
I think I might need a windows manager. I have xwindows installed and
functioning, but when I go into it all I get is shell window. I installed
a couple of small programs but do not know how to start them. I am
assuming that I can start them by typing a command in the shell window,
but I
I am trying to get debian packages to install on my machine by linking from
my Linux box to a WindowsNT PC with a null-modem.
On the Linux box I issue the following command to try to set-up a
connection:
getty ttyS0 9600
On the Windows PC, I open hyperterminal on COM1 with the settings 9600
8-n-1
OPINION
I work for an ISP. Have for going on three years. Find out what your provider
uses and get one that works with them. US Robotics (all of them) have been a
plague for tech support since the day I started. The new X2's were not much
better. I personally tell customers to stick to
On Wed, 13 May 1998, Ian Keith Setford wrote:
I need to purchase a modem for a Debian box and I was wondering if anybody
had a suggestion. I know to stay away from WinModems but they are
rapidly becoming less conspicuous so I want to be sure I don't get one.
Personally, depending on how much
Thanks for renewing my faith in the world :-)
I had thought it may have been a language translation issue.
I have a small knowledge of German, and I pity the person
who forces me to use it ;-)
The tone of email messages is hard to determine without some
indicators such as the smile :-)
I'm glad
Hi all,
I have two questions to ask. One concerns the probelmatic missing package
elf-x11r6lib. the package gs-alladin version 4.03-7 depends on this (I
know there is a newer version but this is another story ) As the elf-..
package is nowhehre to be found I did the following. I edited the
Yes, I think the same. But I've try with all the fonts from the
fontmanager with no success. What are your settings ?
Not the fontmanager. From the K^ in the lower left of the panel:
Settings-Desktop-Fonts ect.
I've got General font set to helvetica, 12 pt, iso-8859-1
and Fixed font set to
Hi,
Can one of the Debian developers (or anyone willing to help) please
contact Herng-Jeng Jou at [EMAIL PROTECTED] about packaging. It
is my understanding that there was an intent to package some of the
software he has organized at SAL (Scientific Applications for LINUX at
I have a problem with Apache Web Server. When i use a cgi script with the
extension .cgi it works fine, but if I try to use it with the extension .pl
it says Method Not Implemented.
Now I have added the AddHandler directive for the .pl extension and it still
does not work. Can someone help me?
My ISP has lynx, that contains a `use zmodem to download to the local
terminal'-option.
I'd like to telnet to my ISP, download a file via lynx, and zmodem it to my
local terminal. Problem is, when I choose that `use zmodem...', I only get
the zmodem handshaking line (with *B and lots of
[EMAIL PROTECTED] wrote:
I've found dumpe2fs more useful (in the same package).
True, dumpe2fs is generally more useful, but it doesn't
explicitly identify superblocks. You have to know that each Group
begins with a superblock.
Bob
--
_
|_) _ |_ Robert D. Hilliard[EMAIL
Matthew,
I have experienced strange colors when the X server doesn't
know about the RAMDAC chip on the video card. Perhaps
you could add the RAMDAC definition to the XF86Config
file (or remove it if it is there).
Pat
P.S. I have been having a most enjoyable email discourse with
Zdenek since
Hello,
I'm in the process of installing and configuring 2.0 on a new machine,
so far everything looks good...
But xv seems to have a problem with jpegs, when I try to load one I get
the following message:
JPEG parameter struct mismatch: library thinks size is 672, caller
expects 456
-Original Message-
From: shaul [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 13, 1998 12:09 PM
To: Vesa Kaihlavirta
Cc: recipient list not shown; @[EMAIL PROTECTED]
Subject: Re: how to zmodem via telnet?
++
++ My ISP has lynx, that contains a `use zmodem to download to the
local
++
On Thu, 30 Apr 1998, Chris R. Martin wrote:
I have an old 486 with a few hard drives in it that I want to use as a
server. I'd like to store debian-packaged apps such as gcc, x11, xemacs etc
on the server, yet keep some functionality on my local drive so I don't
need the server all the time.
Hi,
I copied one pure data-cd. This worked fine.
Then I tried Audio Tracks. In this case the files of the correct size are
created _without_ the CD-Drive running.
I tried my second CD-Drive - same shit.
My System:
Kernel 2.1.101
CD-Writer: Mitsume-2600TE (ATAPI)
2nd CD : Toshiba xxx 12-16
interesting..sorta hits home...
Bob McGowan wrote:
-Original Message-
From: shaul [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 13, 1998 12:09 PM
To: Vesa Kaihlavirta
Cc: recipient list not shown; @[EMAIL PROTECTED]
Subject: Re: how to zmodem via telnet?
++ I'd like to telnet to
Hey,
I'm new in DEBIAN LINUX. So I still have some problems. One is to
install the STAR-OFFICE 4.0. I have the DEBIAN 1.3 distribution and
the staroffice as a tgz-file.
Who can help me?
Thanks Michael
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact
I'm new in DEBIAN LINUX. So I still have some problems. One is to
install the STAR-OFFICE 4.0. I have the DEBIAN 1.3 distribution and
the staroffice as a tgz-file.
Who can help me?
There's a staroffice installer package in debian. Download the .deb, put
the staroffice .tgz file in /tmp,
1 - 100 of 104 matches
Mail list logo