. Sadly I must pull the plug on over $500 worth of electronics
because I can no longer receive technical support. So long Squeeze Box
it was fun while it lasted.
--
Roy Owen
Roy Owen's Profile: http://forums.slimdevices.com
The SDT I can live with out Live 365 I cannot as I am a paying
subscriber. And this USED to be the offical support forum!
--
Roy Owen
Roy Owen's Profile: http://forums.slimdevices.com/member.php?userid=187
View
?
--
Roy Owen
Roy Owen's Profile: http://forums.slimdevices.com/member.php?userid=187
View this thread: http://forums.slimdevices.com/showthread.php?t=74009
___
discuss mailing
First of all the SB are the original SB with the graphic display. They
do not sync/connect with mysqueezebox.com. I am fairly certain that I'm
running Squeeze center 7.3. I do not see any way to connect with Live365
from inside of squeeze center, it has vanished.
--
Roy Owen
Ahh,
Now we see the flaws inherent in Windows... Help! Help! I'm
being repressed Unfortunately there are no easy fixes for this
situation. As a professional Windows developer I run into this *A
LOT* especially in a corporate network. In Windows
the System account does not have access to the
What version of SlimServer? It used to work by restarting the Service(Windows) or stopping and starting the daemon(Linux).On 12/7/05, dfk
[EMAIL PROTECTED] wrote:If you password protect the server and get locked out, how do you get
back
Oops my bad. That's the way it works for the plugin to lock the player/server settingsOn 12/7/05, Roy Owen [EMAIL PROTECTED]
wrote:What version of SlimServer? It used to work by restarting the Service(Windows) or stopping and starting the daemon(Linux).
On 12/7/05, dfk
[EMAIL PROTECTED
Check out
http://www.aagelectronica.com/aag/index.html?target=p_1.htmllang=en-us
it even comes with free (as in beer) and OS software. On 12/6/05, Maditude [EMAIL PROTECTED]
wrote:snarlydwarf wrote: ...now I wanna get one of those weather station things so I have
-real- conditions, not just
I think there must be major differences here between Mac and Windows.What about Linux?
WOL
is a hardware thing not necessarily an OS thing. If the machine
is powered down then it MUST reboot to load the OS. However, if
the machine is in a hibernation state then the hibernation file can be
scraped
I have a Uniden 2.4 GHz phone and no problems with my WiFi
network. The Network is set to CH6 (Only CH that the Netgear 105
MB boost works with), I will refrain from comment on my Netgear WiFi
Router though. I also have no problems with the microwave
however, it is circa 1986. As with all things
Try
C:\program files\SlimServer\Server\Slim
.exe -uninstall
C:\program files\SlimServer\Server\Slim
.exe -install
This will remove the service and then re-install it.On 11/8/05, shifty1725 [EMAIL PROTECTED]
wrote:I had exactly the same problem, but when I try the solution offered I
just get an
In a way, yeah, it's overkill. I mean, who needs a full-blown PC
connected by ethernet to a Squeezebox in the dash when there are
embedded solutions that are cheaper? But still, it is awfully cool to
ssh to the Linux box under the seat! ;)
I've been looking for embeded solutions to no avail, do
Sorry,
I thought you were talking about embedded Linux Controllers with SSH
and network interfaces. I'd like to build a hardware interface
for my squeezebox at work to conenct to my ssh server.On 11/2/05, skyrush [EMAIL PROTECTED]
wrote:Roy Owen Wrote: I've been looking for embeded solutions to
Pressing and holding Pause for several seconds will put the SB inso a Stopped state.On 10/28/05, orrinc
[EMAIL PROTECTED] wrote:Is there a remote STOP command available in the IR remote code set?
I've been using the PAUSE command to stop the SQ2 player at night,and then PLAY to start it again in
I'm not sure how to sort the Live365 presets. They appear to be
sorted by listener hours, not my ideal but I keep my preset list fairly
short.On 10/10/05, fozzie [EMAIL PROTECTED] wrote:
Roy Owen Wrote: Log on to Live365 and add the station to your presets. With the addition
of the Live365
Log on to Live365 and add the station to your presets. With the
addition of the Live365 presets to the web interface this really is the
easiest way to use Live365 and Squeezebox. BTW I have a VIP
membership. You can also move the menu items around so that the
first menu after Now Playing is the
Back when my SlimServer ran on Windows I used the iTunes feature and
was quite happy with it. In the server setup screen just provide
the path to the iTunes folder(s) and the smart playlists should show up
under the playlists menu in SlimServer.On 10/6/05, Lumsmore [EMAIL PROTECTED]
wrote:Here is
You didn't say what OS you are using, I'll assume MS Windows.
Have you tried using a client like tunnelier from BitVise or
PuTTy? I've found that using a seperate ssh client to create the
tunnel and forward the ports is quite often more reliable.On 10/5/05, Wendy Seltzer [EMAIL PROTECTED] wrote:
I
PROTECTED] wrote:
On 10/5/05, Roy Owen
[EMAIL PROTECTED] wrote:
You didn't say what OS you are using, I'll assume MS Windows.
Have you tried using a client like tunnelier from BitVise or
PuTTy? I've found that using a seperate ssh client to create the
tunnel and forward the ports is quite often more
I'm running 2 SBG's, my server is running on Debian. I thought
that I would take a look at the SuperDateTime Screen Saver (SDTSS) to
see if I could hack it to show other weather info. Much to my
suprise most of what I want to see is there however, I am unable to
access any sub menus with my SBG or
Never Mind. I found the problem. Instead of copying the
updated plugin to /usr/local/slimserver/Plugins/SuperDateTime I copied
it to
/usr/local/slimserver/Plugins/SuperDateTime/SuperDateTime. (D'OH
smacks head with palm of hand, hangs head in shame and sits in corner)On 9/26/05, Roy Owen [EMAIL
For all of you that use Windows for workstations etc.
http://www.bitvise.com has a very good (free) ssh client that is
simple to setup for this (or any other) purpose. I use this
solution at work with an SBG and it works great.On 9/2/05, Robin Bowes [EMAIL PROTECTED]
wrote:chris wrote: Yeah, I'm
but it is stable and solid.On 9/2/05, Steve Bernard, Jr [EMAIL PROTECTED]
wrote:On 9/2/05, Robin Bowes wrote: Roy Owen wrote: For all of you that use Windows for workstations etc.
http://www.bitvise.comhas a very good (free) ssh client that is simple to setup for this (or any other) purpose.I use
Okay, about 3 weeks a go my Windows box was struck by lightning, so now
thanks to the insurance company I have a shiny new Dual Xeon EM64T 2.8
GHz box. I've finally gotten Debian to run. When I run
slimserver I get The following modules failed to load:
XML::Parser.
To download and compile them
On 8/20/05, Dan Sully [EMAIL PROTECTED] wrote:
* Roy Owen shaped the electrons to say...Okay, about 3 weeks a go my Windows box was struck by lightning, so nowthanks to the insurance company I have a shiny new Dual Xeon EM64T 2.8 GHzbox. I've finally gotten Debian to run. When I run slimserver I
SS=SlimServer
UNC=Universal Naming Convention eg: \\ServerName\ShareName\FileName
For the service you need to edit the service properties and fill in the LogIn as User section.On 8/16/05, jmallan
[EMAIL PROTECTED] wrote:Thanks for your reply but as anovice Windows XP user I do not understnad
I can confirm this. It appears to be a bug in the 2005-08-12
nightly. I'll install the 2005-08-13 nightly and check back.On 8/12/05, Wallaby [EMAIL PROTECTED]
wrote:Hi guys, this is my first post here since I took delivery of my SB2
about a week ago. The SB2 is great and and has surpassed
Never mind. I was using the MusicInfo plugin on an internet radio station. My Bad.On 8/13/05, Roy Owen [EMAIL PROTECTED]
wrote:I can confirm this. It appears to be a bug in the 2005-08-12
nightly. I'll install the 2005-08-13 nightly and check back.On 8/12/05, Wallaby
[EMAIL PROTECTED]
wrote:Hi
It appears that you are running some version of Windows, if you are
running SS as a service you won't be able to access the network shares
via drive letter. Change the SS service to log in as a named
user, and then change your short cuts to use UNC notation rather than a
drive letter.On 8/10/05,
It's not very powerfull but I like the iRock. Works great for my MP3 player in the car.On 8/10/05, nhopton
[EMAIL PROTECTED] wrote:Fellow Squeezers, I've been toying with the idea of buying a little
low-powered FM transmitter to plug into the headphone socket of theSqueezebox so that I can listen
I use SSH tunnels and port forwarding. If you're just around the corner would WiFi work?-- Do meddle in the affairs of Dragons,for you are crunchy and good with Tabasco.
___
Discuss mailing list
Discuss@lists.slimdevices.com
Your network at work won't allow an outbound SSH tunnel? That is
usually one of the few outbound ports that are allowed. You could
try setting your tunnel up on a different port (80), usually the
firewall/proxy are not protocall specific, however they can be.
Ask your network admin (very nicely)
SSH for Windows:
http://sourceforge.net/projects/sshwindows
SSH Setup
http://www.vbmysql.com/articles/ssh-tunnel-part2.html
Easy SSH client
http://www.bitvise.com/tunnelier.html
All of the above software is free and not nag-ware.
On 8/4/05, MrC [EMAIL PROTECTED] wrote:
Free or can you pay a
I have just encountered an interesting anomaly on my SBG. Firstly
I've created an SSH tunnel work to my Slimserver pc at home. If I
actually run Slimserver on work PC the display on my SBG is fine.
However if I stop the SlimServer and start the SSH tunnel the left most
column of pixels has some
There is also a plugin that that accomplishes this.On 7/26/05, ChrisDev [EMAIL PROTECTED]
wrote:robertwallace Wrote: Is there a kiosk-mode skin for Slimserver?
RobertTry the touch pad skin, nice and user friendly!Chris--ChrisDev___Discuss mailing list
This is a Windows issue. Mapped network drives with letters are
not available to services, they are part of the user's profile.
In order to use the share you *MUST* use UNC notation, if you are using
a disparet network (ie not Windows) you are out of luck. Also try
having the service run as a
Technicallly it is a Service Helper App.On 7/25/05, Philip Meyer [EMAIL PROTECTED] wrote:
A newSlimTray.exe has replaced it which is a proper tray application andsimply launches your web browser when activated.
I
don't think of it as a proper tray application.A proper
application that sits in the
You should still be able to start slimserver from the command line once you are logged into windows.On 7/25/05, dSw
[EMAIL PROTECTED] wrote:Roy Owen Wrote: This is a Windows issue. Mapped network drives with letters are not
available to services, they are part of the user's profile. In order to
Stop the slimserver
open up the SlimServer.pref file change the line for the time fromat
from
timeFormat = |%I:%M:%S %p
to
timeFormat = |%I:%M
restart the slimserverOn 7/19/05, Bart [EMAIL PROTECTED] wrote:
I have looked at all the time format options and the one I want is
missing.I would
That's a great station Greg. Thanks for the link.On 7/13/05, Greg Klanderman [EMAIL PROTECTED] wrote:
radish
[EMAIL PROTECTED] writes: FYI, that particular station is 22kHz. Winamp does indeed display the sample rate.thanks Radish!___
Discuss mailing
On 7/12/05, Greg Klanderman [EMAIL PROTECTED] wrote:
I assume you mean in the SB2 box itself, rather than the server?Is there any way to do the sample rate conversion on the serverside for an SB1?
Not that I am aware of. I face a similar problem. I've
resolved it by using both the digital and
Below is a portion of my log file. Running 2005-07-07 build on
Windows XP. I have deleted the database and rebuilt but I
encounter the same problem. Any help would be welcome.
Thnaks
Roy
iTunes: Confused looking for key in dictionary at C:/Program Files/SlimServer/server/Plugins/iTunes.pm line
I tried submiting from the forum but received no answer.
I've noticed that if I start Slim.exe from a command prompt (the same
holds true for slimserver.pl) with an asynchronous launcher, the
program never starts. Just starting from a command line it works fine.
Due to networking limitations I am
On 6/22/05, Michael Herger [EMAIL PROTECTED] wrote:
I tried submiting from the forum but received no answer.Forum or mailing list - there's no difference. I got your first mail, too,but do not have an answer. That's why I'll ask some questions :-).
I've noticed that if I start Slim.exe from a
This is a windows problem. Maped drives are not available to services even if they are run with a named user account.On 6/22/05, JJZolx
[EMAIL PROTECTED] wrote:Roy Owen Wrote: Even with Firedaemon I am unable to reach the network share I need
Is this a problem that can't be fixed?Do you know why,
I was under the impression that slimserver couldn't use UNC naming
conventions. I'll give it a try and let you all know what happens.On 6/22/05, JJZolx
[EMAIL PROTECTED] wrote:Roy Owen Wrote: This is a windows problem. Maped drives are not available to services
even if they are run with a named
Nope, no dice. I did get the Asynchronous launcher working. Needed to wait just a little longer for the startup.On 6/22/05, Roy Owen
[EMAIL PROTECTED] wrote:I was under the impression that slimserver couldn't use UNC naming
conventions. I'll give it a try and let you all know what happens.On 6/22
PROTECTED] wrote:
Quoting Roy Owen [EMAIL PROTECTED]: I suspect it's the fact that the iTunes Library.xml file is on a Netware volume. It shouldn't be a problem for most people.
what does the d_itunes log look like?If it finds the xml file, you should begetting the use itunes option on server
kdf,
That patch did not work.On 5/26/05, kdf [EMAIL PROTECTED] wrote:
Quoting Roy Owen [EMAIL PROTECTED]: kdf, I'm not sure how to read the diff file. I assume that I remove the lines preceded by '-' and add the lines preceded by '+'?
that's exactly right :)I'll be merging the fix soon anyway
Thanks for all your helpOn 5/26/05, kdf [EMAIL PROTECTED] wrote:
Thanks Roy.Best I can suggest at this point is to take a look at the latestnightly.A slightly modified version of my patch, and one from Micheal Hergershould be fixing this problem, and preventing the plugin from being marked as
Just installed the latest nightly. I think it's working properly, I'll do some further testing.On 5/26/05, Roy Owen
[EMAIL PROTECTED] wrote:Thanks for all your help
On 5/26/05, kdf [EMAIL PROTECTED]
wrote:
Thanks Roy.Best I can suggest at this point is to take a look at the latestnightly.A
iTunes is really broken now. I did a rescan with clear library
checked and now Slimserver can't locate any of my iTunes files.
Also the Use iTunes option on the main server settings page is mising.On 5/26/05, Roy Owen [EMAIL PROTECTED]
wrote:Just installed the latest nightly. I think it's working
I suspect it's the fact that the iTunes Library.xml file is on a
Netware volume. It shouldn't be a problem for most people.On 5/26/05, kdf [EMAIL PROTECTED]
wrote:have you disabled and re-enabled itunes plugin?have you restarted the server?
if you have done both, and nothign works...then consider
kdf,
I tried your fix and it didn't work. However I noticed that you
commented out line 232 in itunes.pl and not 233. If line 233 is
comented out both the use iTunes option and the iTunes tab appear in
the web interface. (I installed Active perl 2.8 to test).On 5/25/05, kdf [EMAIL PROTECTED]
On a networked (netware) drive. I don't start slimserver until
after I've logged into the network but for some reason it can't open
the library file. If I comment out line 233 and set up iTunes
manually it works fine after that.On 5/25/05, kdf [EMAIL PROTECTED] wrote:
Quoting Roy Owen [EMAIL
kdf,
I'm not sure how to read the diff file. I assume that I remove
the lines preceded by '-' and add the lines preceded by '+'?On 5/25/05, kdf [EMAIL PROTECTED]
wrote:Roy,since you now have ActivePerl installed, could you try this patch and let me
know if that works.If you have to patch
I've just done a clean install of the Slimserver 5/24/2005 nightly and
the iTunes plugin will not enable. This is on a test workstation
not my main server. Thought I'd do it here first. iTunes
version 4.8.0.31. Any ideas on how to get it going? Thanks-- Do meddle in the affairs of Dragons,for you
OS is Windows XP SP2 latest patches.
Here is the logfile
2005-05-24 07:58:21.4791 Your data source needs to be configured. Please open your web browser,2005-05-24 07:58:21.4792 go to the following URL, and click on the Server Settings link.2005-05-24 07:58:
21.4793 The URL to access SlimServer is
It won't enable. I check the option box and as soon as the browser refershes the check is gone.On 5/24/05, Philip Downer
[EMAIL PROTECTED] wrote: I am unable to get the iTunes Library option to show up so I can set
the path to the iTunes library.Just a quick check, but have you enabled the iTunes
Thanks kdf, I look forward with baited breath. BTW, I've
also put in a feature request at Apple to be able to specify the
location of the library file in iTunes as well.
On 5/24/05, kdf [EMAIL PROTECTED] wrote:
ah, yes, it appears I was ignored when I mentioned that the itunes settings tabneeds
Shouldn't I be able to just open the prefs file and remove iTunes from the disabled list?On 5/24/05, kdf
[EMAIL PROTECTED] wrote:Quoting Roy Owen
[EMAIL PROTECTED]: Thanks kdf, I look forward with baited breath. BTW, I've also put in a feature request at Apple to be able to specify the location
Okay, thanks.On 5/24/05, kdf [EMAIL PROTECTED] wrote:
Quoting Roy Owen [EMAIL PROTECTED]: Shouldn't I be able to just open the prefs file and remove iTunes from the disabled list?you can do that too.
___Discuss mailing listDiscuss@lists.slimdevices.com
Good network managment is to keep all servers logged out. This
avoids Man in the middle style attacks. Basically put, someone
could launch an attack through the logged in account and hijack your
server. I'm not too worried, I'm behind a firewall and the only
open port is 22, for ssh.On 5/23/05,
You need to install Active Perl and then run the Slim.pl file. On 5/20/05, damage [EMAIL PROTECTED]
wrote:i made some changes to xpl.pm and was trying to see if it worked. i
stopped restarted the slimserver after making the changes but mychanges don't appear to be loaded.do i need to force the
SlimServer already does this (minus the cover art). Am I missing something in your question?On 5/9/05, Ed Atlee
[EMAIL PROTECTED] wrote:
http://hme.pvrblog.com/taxonomy/term/12nd item, 'iSeeiTunes'.Okay, now, I've got to think that a good number ofSqueezebox owners might also have a TiVo or two
Richard,
I have been unable to cause the crash again. Maybe Windoze had a bit stuck sideways...On 5/5/05, Roy Owen [EMAIL PROTECTED]
wrote:Richard,
SoftSqueeze 2.0b8 worked for a while. I had to disconnect, when I
reconnected it crashed the Service on the server. I see if I can
get a log file
Wouldn't this constitute unauthorized copying/distribution?
-- Do meddle in the affairs of Dragons,for you are crunchy and good with Tabasco.
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
On 5/6/05, Robin Bowes [EMAIL PROTECTED] wrote:
Michael Herger wrote: Do you have a firewall installed and activated (XP comes with an integrated firewall!). Be sure to check the FAQ about that:
http://www.slimdevices.com/su_faq.html#networking-firewallHmmm. That's confusing. It says:You will
Richard,
SoftSqueeze 2.0b8 worked for a while. I had to disconnect, when I
reconnected it crashed the Service on the server. I see if I can
get a log file it may take some doing as I haven't been able to
reconnect even with the service restarted, I may need to reboot my
server.On 5/4/05, Roy Owen
On 5/4/05, Richard Titmuss [EMAIL PROTECTED]
Yes, the new version of Softsqueeze is in the Slimserver 6.0.xdownloaded using subversion, or the nightly build. This fix is not yetavailable in 6.1.x versions.
Any idea as to when it will be available in 6.1.x?
-- Do meddle in the affairs of
Okay thanks, I'll give it a try.On 5/4/05, Richard Titmuss [EMAIL PROTECTED] wrote:
Roy Owen wrote: Any idea as to when it will be available in 6.1.x?When I build a new version on that branch, probably later this week. It
takes at least an hour to build, confidence test and upload eachrelease, so
If you don't have the save password box checked you will get 2 login
prompts one for port 9000 and a second for port 3483. However I
am experiencing tthe same lack of connection as you. If I SSH
over the local LAN I don't have any problems. But if I go out
over the internet I have the problem.On
I think this is what you are looking for.
http://www.gwendesign.com/slimserver/development.htm#shadowplayOn 5/3/05, GoCubs
[EMAIL PROTECTED] wrote:
I recently upgraded to a SB2 and am using my old SB1 in a different roomONLY for multi-room display/control functionality (not using any of theaudio
Do you have Putty set to forward ports through the SSH
connection? Setting up SSH is one of those things that I learn
how to do and promptly forget once it is working.On 5/3/05, MMay [EMAIL PROTECTED]
wrote:Roy Owen Wrote: If you don't have the save password box checked you will get 2 login
I'm experiencing this problem as well. It appears to be related
to the bandwidth of the broadband connection. I've tried running
on 10MB and 100MB networks and it works just fine. But when I
connect via my cable modem nada. Sometimes I can't even connect
to the SlimServer. Go ahead and file the
Doesn't matter I've tried both ways. Through the Local LAN the
built in tunnel works great. Over the internet neither it or
Tunnelier (from BitVise) works with SoftSqueeze. On 5/2/05, pbrubaker [EMAIL PROTECTED]
wrote:Are you using the built in tunnel in Softsqueeze?--pbrubaker
Currently I am unable to connect to my home server over the
Internet. I receive the Connection failed. Please check
server settings. in the SoftSqueeze display. I am however
connected to my server with an SSH tunnel. I am able to connect
via local LAN over SSH to the server on my laptop. I'll do
I don't use any Instant Messenger program. I used ICQ back
when very few people were using it and it was great. Now all
Instant Messenger progs are good for is receiving pr0n spam. I
have the gmail notifier set to check every minute or so, so I don't
miss any important emails. Email is almost a
AFIK, it only applies to upgrading from one version to another. IE SS6.0.1 to SS6.1.X.On 4/28/05, Chris Glushko
[EMAIL PROTECTED] wrote:I thought I read something a while back on this list
that said you should uninstall your current version ofSlimserver before upgrading to a new version?Is
(buffer status on SoftSqueeze reports 0%), I believe
that it is a network problem and not a SoftSqueeze problem. I'll keep
digging and report my findings here.
--
Roy Owen
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com
Okay, I had SSH working with SoftSqueeze 1.X and SlimServer
5.4.x. Now with Softsqueeze 2.0 b99 and SlimServer 6.1 Trunk I am
unable to connect. I am able to create a tunnel and use remote
desktop (WinXP SP2). Below are the entries from the Windows Event
Log (Using Open SSH for windows):
Event
You need to allow access via the following ports 9000 (TCP) and 3483 (TCP). Once this is accomplished it should work.On 4/25/05, bromo3
[EMAIL PROTECTED] wrote:I have just got a SB2 and have it on my wired network - and the only way
I can get the thing to play is to disable the firewall
Check this out http://www.livejournal.com/users/brad/2079442.htmlOn 4/20/05, bubba
[EMAIL PROTECTED] wrote:Call be crazy, but I'm thinking of taking a Squeezebox out of its case and
mounting it in the wall of my bathroom (not *too* close to water!), so thedisplay is visible, with the main body of
Okay, ThanksOn 4/18/05, Michael Herger [EMAIL PROTECTED] wrote:
On Sun, 17 Apr 2005 13:36:28 +0200, Roy Owen [EMAIL PROTECTED] wrote: Running the 4/15/2005 nightly on WinXP SP2. When attempting to access ShoutCast SS crashes with the following in the event log:
The description for Event ID ( 0
Running the 4/15/2005 nightly on WinXP SP2. When attempting to
access ShoutCast SS crashes with the following in the event log:
The description for Event ID ( 0 ) in Source ( Application ) cannot be
found. The local computer may not have the necessary registry
information or message DLL files to
Yup, that's what I do too. Although I really only have one station that I listen to.On 4/17/05, relen
[EMAIL PROTECTED] wrote:I've saved internet radio stations in playlists for easy access and this
works fine in all cases except Live365.I'm a VIP user for ad-free listening and I presume that
I've currently got the --d_plugins and --d_remotestream on however there is no output in the log file.On 4/17/05, Michael Herger
[EMAIL PROTECTED] wrote:Am Sun, 17 Apr 2005 07:36:28 -0400 hat Roy Owen
[EMAIL PROTECTED]geschrieben: Running the 4/15/2005 nightly on WinXP SP2. When attempting
hat Roy Owen
[EMAIL PROTECTED]geschrieben: I've currently got the --d_plugins and --d_remotestream on however there is no output in the log file.Try running the application manually: open a DOS windows (run cmd), go
to the c:\program files\slimserver\server (or wherever your server isinstalled
Older versions of Windows and DOS you need to specify the actual device
ie: COM1, COM2, LPTx... Although I believe PRN defaults to
LPT1. CON and STDOUT are the same in DOS.
Just some old trivia floating around in an old programmers head...On 4/14/05, Michael Scott [EMAIL PROTECTED]
wrote:Quoting
Are you running logged in or as a service. Windows does not keep network connections when logged out.On 4/15/05, JJZolx
[EMAIL PROTECTED] wrote:Running SlimServer 6.0.1
06/15 nightly on Windows XP Pro.I'm trying toget SlimServer to use a music folder on the network.Permission on thenetwork share
Are you logged in? Also try assigning a drive letter to the share, that may help.On 4/15/05, JJZolx
[EMAIL PROTECTED] wrote:Roy Owen Wrote: Are you running logged in or as a service. Windows does not keep network
connections when logged out.Running SlimServer as a
I as well yddraigatgmail.comOn Apr 12, 2005 8:30 AM, Jim Dibb [EMAIL PROTECTED] wrote:On Apr 12, 2005 8:23 AM, Robert Jorgensen [EMAIL PROTECTED] wrote: I use google mail which currnetly offer you more than 2GB of storage. I have quite a number of invites to give away.If anybody is interested drop
/SeverSettings/Formatting/TimeFormat
On Apr 11, 2005 9:06 AM, JayNYC [EMAIL PROTECTED] wrote:Is there a way to make it so that when the Day-Time is displayed whenthe SB2 is in off-mode, that there is no seconds field and it does
I have SoftSqueeze installed at work, when I install from my SlimServer
webpage the installer reports Softsqueeze 2.0b3. When I run
SoftSqueeze the prefferences pane reports version 2.0a16. Have
uninstalled SoftSqueeze, cleared the cache, is this an error in
SoftSqueeze or my installation?
I leave mine on all night. When my wife comes to bead she turns
it down, that way when (not if) I awake in the middle of the night I
can still hear my music and get back to sleep.
Just my $0.02.
On Apr 11, 2005 12:57 PM, Thomas B. Malsbury [EMAIL PROTECTED] wrote:Tahir wrote:Thanks DeanIt's
Running the SS 6.1.0 Trunk 2005-04-06 nightly and I've noticed that if
I clear the play list and create another one the Player starts playing
on the same track number that it stopped on. Is this a bug or is
there a way to reset the track number to 1 (0)?
Thanks-- Do meddle in the affairs of
I'm Running SS 6.1.X on my laptop, I use iTunes. I can't seem to find
a combination of settings so that unchecked songs in iTunes DON'T show
up in SlimServer. What am I missing?
Thanks
--
Do meddle in the affairs of Dragons,
for you are crunchy and good with Tabasco.
I've tried that and they still show up.
On Apr 5, 2005 9:38 AM, Steven Moore [EMAIL PROTECTED] wrote:
If you goto to server settings and then itunes in the web interface you
should see a Ignore Songs Disabled in iTunes option.
Steven Moore
On 5 Apr 2005, at 2:30 pm, Roy Owen wrote:
I'm
Yup
On Apr 5, 2005 10:05 AM, Steven Moore [EMAIL PROTECTED] wrote:
Did you try doing a rescan after you changed the setting?
Steven Moore
On 5 Apr 2005, at 2:42 pm, Roy Owen wrote:
I've tried that and they still show up.
On Apr 5, 2005 9:38 AM, Steven Moore [EMAIL PROTECTED]
wrote
://forums.slimdevices.com/gforum.cgi?post=37565;
search_string=ignore%20songs;guest=55531#37565
Steven Moore
On 5 Apr 2005, at 3:15 pm, Roy Owen wrote:
Yup
On Apr 5, 2005 10:05 AM, Steven Moore [EMAIL PROTECTED]
wrote:
Did you try doing a rescan after you changed the setting?
Steven Moore
On 5
1 - 100 of 132 matches
Mail list logo
