Yes, I have the same thing here. It just means that one of your soundcards
is a high-end pro card that will play 16bit 44.1, 48k files and maybe 32k.
Being a card designed for pro-audio it won't handle lower resolution files,
like the 8000hz 16bit mono it's complaining about. That low resolution
.
http://www.supercontrol.de/cat/ft847faq/page4.htm#catcontrol
Hope you get it all figured out.
73, Jim - KK7A
*** REPLY SEPARATOR ***
On 11/5/2003 at 9:48 AM LAWRENCE REJNIAK wrote:
I am using a FT-847 and have not been able to make the the computer pick up
the
mode
around for an upgrade that is never to come and could start planning on
moving on (regrettably).
73
Jim KS1J
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike Rhodes
Sent: Tuesday, October 06, 2015 12:04 PM
To: DX4WIN
to handle
the?
Thanks
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Regrettably none of my DX4WIN 8.05 group numbers or descriptions are to be
found after the move to Ver 9.01.
I have 142 groups mostly for different contest Q's.
Any suggestions?
Jim KS1J
__
DX4WIN mailing list
Home: http
Good to go. Thanks
From: Paul van der Eijk [mailto:pvandere...@gmail.com]
Sent: Sunday, October 22, 2017 16:31
To: Jim
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Groups Vaporized -
Jim,
Keep a copy of your 8.05 log in a safe place!
Open the log directly, no export/import steps
showing for spots
of 21:12, 21:04 and 21:34.
This date shift does not occur if I connect directly to VE7CC.net.
Any ideas?
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
be resized and that is about it.
Although the solution was to load in a backup copy of the config.dat., I am
wondering if a cause had ever been found or documented.
73
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net
Thanks Jim for the advice. I'll give it a go as soon as possible. This might
explain some of the discrepancies.
However these GRID errors occur for stations I have only worked once.
Here is an example. I worked SX60RAAG one time only. On LOTW his GRID is
KM17UW. When I imported his record
something.
73
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com
This list hosted
am at DX4WIN 9.09.1259
This had been working ok in previous version.
73
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
by an award sponsor.
If this is the design then I’m okay with it
Jim KS1J
From: Paul van der Eijk [mailto:pvandere...@gmail.com]
Sent: Friday, January 03, 2020 21:57
To: Jim
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Submission Report Only Empty
Jim,
Do a submission and save
how the Group Names. I
could manually update that log with the intervening QSO's but wonder if
there is an easier way.
As to the cause, I have no idea.
73
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listi
Thanks Paul!
That worked and the Groups and Group Names are restored. Meanwhile I did rid
the log of duplicates a few days ago . The Group Names may have gotten deleted
when I did that.
Jim KS1J
From: Paul van der Eijk [mailto:pvandere...@gmail.com]
Sent: Sunday, March 22, 2020 13
Is there a limit to the number of characters allowed in the Packet 1
-CALLSIGN ALERT fill in?
I can't go past 61 characters.
Thank
KS1J, Jim
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http
Jim KS1J
-Original Message-
From: Jim Reisert AD1C [mailto:jjreis...@alum.mit.edu]
Sent: Friday, November 27, 2020 20:46
To: Jim
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Dx4Win Call Sign Alert
> Is there a limit to the number of characters allowed in the Packet 1
> -CALLSIGN
You don't need this driver for DX4WIN! DX4WIN works perfectly fine with LPT
port and Windows XP (an LPT driver is built into DX4WIN).
You will need this driver for Writelog, however,
As someone else pointed out, the problem sounds like an installation issue.
73 - Jim AD1C
--- Dean M. St. Hill
However, this will not work if he has phone or mixed entity credits approved
prior to 1 January 1975. DX4WIN will try to submit them again.
73 - Jim AD1C
--- PY2YP [EMAIL PROTECTED] wrote:
This is a very good point. You only can do that using a Group starting at
Jan, 1, 1975. The DX4WIN
it much more user friendly.
Jim Rhodes K0XU
[EMAIL PROTECTED]
) and should be downloaded somewhere
else if you don't have internet?
Jim Rhodes K0XU
[EMAIL PROTECTED]
can address in the next version.
73 - Jim AD1C
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
by entity
- print a label saying following countries have no QSL bureau
- print the rest of the lables, sorted by entity
73 - Jim AD1C
--- Larry Alkoff [EMAIL PROTECTED] wrote:
I routinely mark all QSL's Method = Bureau
and print all QSL's using Method All.
This separates the various Methods
with the QSO information.
I have used 72 groups so far, so only have 182 left (256 - 72 - 2 (YL/QRP)).
73 - Jim AD1C
--- Larry Alkoff [EMAIL PROTECTED] wrote:
I have just completed pasting info
Notes for This QSO
nearly 2000 strings
consisting of 2002 ARRL CW DX Contest.
A very tedious task
supports it.
73 - Jim AD1C
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
__
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
I was thinking of a pure software solution. There is a hardware solution which
WA9ALS can tell you more about.
73 - Jim AD1C
Original message:
[EMAIL PROTECTED] DL8HCO wrote:
Is it possible to work RTTY in DX4WIN with the MMTTY-Software and
how can I configure it ?
I answered
I also don't believe the labels should be changed. The people at ARRL are
entering QSO data into the DXCC computer based on band, not frequency. It's
easier if they don't have to translate this in their heads and make a mistake.
73 - Jim AD1C
p.s. Meters should be abbreviated M not m
of months) - 256MB for $27. I checked a few
days ago and it was up to $37 or $39. I just checked today and it's up to
$57 - WOW!
73 - Jim AD1C
--
Season's Greetings 2001/2002 - http://www.ad1c.com/2001/
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL
the program made a wrong operation and it
will be termined
You are not alone -- I and others have the same problem. Paul has not
fixed this problem yet. You should try to download the IOTA database from
the ON4AOI site:
http://users.skynet.be/ON4AOI/dx4win.shtml
73 - Jim AD1C
--
Season's
, as the format of the data in the
GOLIST database is changing, but it will provide start/end dates for managers.
73 - Jim AD1C
At 09:52 AM 1/11/2002 -0600, Larry Alkoff N2LA wrote:
I have noticed that I cannot delete the call in the QSL Manager log field
when there are more than one qso
- http://www.ad1c.com/2001/
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
with the super Ten Tec rcvr,
the RX-340.
73, Jim KH7M
printing in the middle of a
partially used sheet of labels?
73, Ed N3HXQ
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
Jim Rhodes K0XU
[EMAIL PROTECTED]
--- Mike Mellinger WA0SXV [EMAIL PROTECTED] wrote:
Go to the Prefix Box and change the prefix to K. Then correct the
state and zone and save.
If you correct the state, the CQ Zone will be re-computed automatically.
73 - Jim AD1C
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford
/iom_software/quiksync3.html ). You can use it to back up
to ANY media in the background - CD, ZIP, floppy, hard drive, network.
73 - Jim AD1C
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
9 filter,
which seems to basically be working, but I end up with
an error for each QSO which is due to a leading
space at the beginning of each callsign. Any
assistance in correcting this will be much
appreciated.
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA
Go into your radio internal settings and turn off Transceive. I found DX4WIN
works much better this way, but the radio no longer babbles so CT doesn't get
the frequency when you spin the dial.
=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL
they ARE different than the normal DIN plug - beware those eager to sell
you - one 8 told me he had them in stock - they were just plain olde
DIN's
Caveat Emptor!
K4OJ
- Original Message -
From: Guy [EMAIL PROTECTED]
To: dx4win@mailman.qth.net; [EMAIL PROTECTED];
[EMAIL PROTECTED]
). The only time I lose a connection is if the remote node
goes down, or something happens to my router or cable modem. Using ATT
Broadband Internet.
I don't filter out much besides the stuff above 2 meters. I like to see spots
from all over the world.
73 - Jim AD1C
=
Jim Reisert AD1C, 7
I have not heard anything about a beta test. I've been helping Paul in the
past.
73 - Jim AD1C
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
Jim Rhodes K0XU
[EMAIL PROTECTED]
Sent in my order last Saturday and had the registration key on Sunday.
Less than 24 hours.
Jim - N4ST
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Bear
Sent: Tuesday, February 04, 2003 17:09
To: Dx4win@mailman.qth.net
Subject: [Dx4win] Getting
I am running an old version (4.07). I really have not had a good reason
to upgrade. I just started county hunting and find there are errors or
omissions in the counties database. Is there a way a user can modify
this or is there a download available?
=20
73
=20
Jim N=D8WE
--- StripMime Report
Jim,
My apologies. I stand corrected on AC8H. He does indeed come up with the
right info. Is the only solution on these types of calls to have an entry in
the callsign table of the both the old and new country?
Jim, KS1j
- Original Message -
From: Jim Reisert AD1C [EMAIL PROTECTED
the Pending Credits
in LOTW and manually update the Subm flag in the corresponding QSL's in
DX4WIN. It would be nice if LOTW provided a download that included the
Pending Credit flag (as well as other info) and if DX4WIN allowed updating
based on this. Nice but not critical.
Jim, KS1J
seems to be working fine.
73, Jim, K0JUH
- Original Message -
From: Les Kalmus [EMAIL PROTECTED]
To: Dx4win@mailman.qth.net
Sent: Wednesday, June 01, 2005 3:02 PM
Subject: [Dx4win] V7 MMTTY Window Problem
In V7, the MMTTY window opens OK along with the RTTY control window
Since I upgraded to 6.04 I cannot export a file. The selection is greyed
out on the menu. What on earth have I done wrong? I can pull the log up
with 6.03 do an export, but this is a pain. Any ideas?
Jim Rhodes K0XU
[EMAIL PROTECTED]
Experience is the thing you have left when everything else
Thanks Paul, that was what I had forgotten to do with the upgrade.
At 08:24 AM 5/9/2005, Paul van der Eijk wrote:
Jim,
Did you copy your license file to the 6.04 directory?
--Paul
At 10:44 PM 5/8/2005, you wrote:
Since I upgraded to 6.04 I cannot export a file. The selection is greyed
out
Running DX4WIN 7.1 under XP Pro and I unconsiously changed the backup file
xtention from ~XL to file extention XLS and cannot change it back to DXL. after
an over night system reboot to update anti virus s/w.
Any easy way to do this ??
Jim, VK3KE/VK3DBQ
From [EMAIL PROTECTED] Fri Oct 21 22:10
That helped. The F9 key doesn't always clear it, but closing and
reopening the log window does.
73
Jim N0WE
-Original Message-
From: Garry Shapiro [mailto:[EMAIL PROTECTED]
Sent: Friday, February 09, 2007 2:31 AM
To: [EMAIL PROTECTED]
Subject: RE: [Dx4win] Log Problem
And if F9 does
Need help connecting DX4WIN with the new rig. I have the rig talking to
other logging programs but can't seem to get it to talk to DX4WIN. My old
1000MP worked fine. Is there a new rig file? I am running Version 7.01.
Thank
73
Jim N0WE
. Is there some way
to belatedly retrieve this data and incorporate it into the upgraded logbook?
Thanks for the help!
73,
Jim W1YY/7
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http
For some reason since I upgraded to 8.02 every spot on 30 meters shows up
highlighted in green, even where I have already worked that country on 30
meters, and in many cases, that particular station. Any idea what's causing
this?
73, Jim W1YY/7
Help! I use an older Sony Vaio desktop as my radio computer, and run
DX4WIN (8.02, which I upgraded from 7.05 a month ago). I saved my contacts
as recently as yesterday morning. Last last night I uninstalled some
programs I no longer use on that computer (like Microsoft Office, etc.).
None of
that would result in a faster response
time? Are there any other settings I should have changed other than just the
COM port? Please bear in mind that you are talking to a non-techie!
Thanks in advance for any help.
73,
Jim W1YY/7
__
Dx4win
One clarification to my email - the adapter I am using is called a USB-A to
serial cable, not a USB to RS232 adapter. Sorry for any confusion.
Jim W1YY/7
--
From: Jim Simon jhsi...@comcast.net
Sent: Friday, June 04, 2010 2:12 PM
To: DX4Win
Is there any way to completely eliminate spots for unwanted bands (for
example, 2 meters and 6 meters) in the dx spots window? Right now they
appear in grey, but I'd like to block them out completely. I'm using v.
8.04.
Thanks es 73,
Jim W1YY/7
bands/modes I do want to see scroll off the screen too quickly.
Any further thoughts? Thanks!
73,
Jim W1YY/7
--
From: Kjell W. Strom strom.l...@xs4all.nl
Sent: Saturday, June 05, 2010 11:36 AM
To: 'Jim Simon' jhsi...@comcast.net; 'DX4WIN' DX4WIN
,
Packet3. Can someone suggest how to cure the problem?
Thanks es 73,
Jim W1YY/7
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
-key the
names back.
My question is whether there is an easier way.
I am running 8.05.
73
Jim KS1J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN
There is a nice display of LoTW membership in the DX spots window. This is
useful in deciding whether to work another station in an unconfirmed entity.
However, I would like to be able to tell if a station I hear, but is not
spotted, is a member of LoTW. Is there a way to do this?
73, Jim
these
files?
Jim AD4J
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
.
I really appreciate all the suggestions. Hopefully, DX4WIN will eventually have
a convenient way of displaying LoTW membership when a call is typed into the
QSO Window. Perhaps the ARRL will provide a query service for this, at some
point. For now, using the ARRL page seems best.
Jim AD4J
One disadvantage of using DX Summit with for DX4WIN spots is that frequency is
only accurate to the kHz. A spot that shows up on 14200.4 on a browser will
display as 14200.0 in the DX4WIN spot window.
Jim AD4J
__
DX4WIN mailing list
I wonder if anyone else is having a problem getting v8.05 to CW announce
DX spots ?
In previous versions, the feature worked fine. I cant get it to work in
v8.05
Im wondering if its cock pit error, or a bug in the software.
Appreciate your help on this one
..
73, Jim
WPX credits.
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Saturday, July 07, 2012 08:15
To: dx4win@mailman.qth.net
Subject: [Dx4win] WPX LOTW versus DX4WIN
I must be missing something.
I have
Hello, Im not having any luck changing fonts within DX4WIN. In the Preferences
screen I click on the Screen Tab. It wont let me click on any field under
Screen Fonts / Scale. The help menu tells me to double click on the font to
change but nothing happens. Did I miss a step? Jim
back you could
buy credits for your QSLs from LoTW and if you bought in bulk, the price
went down, now it's a flat 12 cents each.
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Monday, July 16
Recently the same call window has been suddenly disappearing from my
screen, with no particular catalyst that I can identify. I then have to go
back into the window menu each time to bring it up again.
Any thoughts on what might be causing this?
Thanks es 73,
Jim W1YY/7
DXing! :-)
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of ALAN ZACK
Sent: Friday, February 22, 2013 03:31
To: 'Jim Reisert AD1C'; 'DX4WIN Reflector'
Cc: Violette, Daniel R
Subject: Re: [Dx4win] ARRL Diamond DXCC
I have been using TQSL 1.14 beta for weeks and have experienced no issues.
YMMV
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Joseph Orsak
Sent: Wednesday, May 22, 2013 20:33
To: dx4win@mailman.qth.net
Subject
Are you running any other programs that talk to your rig?
Do you get any error message about the com ports when you start DX4WIN?
If you have the radio com port enabled, seems like you should get either a
com port not available or a radio timeout error message.
_
Jim - N4ST
-Original
Another advantage of the newer TQSL programs is that they automatically
handle some of the newer digital modes without having to just blindly map
them to a generic DATA mode.
_
Jim - N4ST
__
DX4WIN mailing list
Home: http
idea how to fix this problem, short of flagging the QSO's as
invalid? Any suggestions appreciated.
Thanks and 73.
Jim Johns KA0IQT
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net
Jim -
Thanks. It was the operation of double-clicking on the W in the report
that I didn't fully understand. I thought that the report was linked to
the DXCC record QSO. I didn't realize that it worked the same as using
F8. Looking closer, the 1988 QSO was just the earliest QSO that matched
reveals the Import/Export filter window
but there are NO filter selections at all.
Now if I select LotW - Export to LOTW, another message is raised: Could not
find ADIF filter
How do I restore the standard set of Import/Export filters? ( I have current
backups)
73
KS1J Jim
After a bit of further searching I restored DX4WIN.IEP and the filters were
back. My backup version is dated Jan 26 2011 which I assume is the latest.
73 Jim
- Original Message -
From: Jim Bowman k...@arrl.net
To: Dx4win@mailman.qth.net
Sent: Saturday, June 15, 2013 12:57 PM
Subject
Ha,
W3LPL has such a great antenna farm, I can't hear his spots even when they
are from MD.
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Barry
Sent: Tuesday, July 23, 2013 12:51
To: dx4win@mailman.qth.net
Easily done! Set the following filter: SET/FILTER KEYWORD/REJ
PSE,THANK,TNX,heard in
Edit to add your own favorite things you do not wish to see. The above
filter blocks DX beggars, braggers and W3LPL since it added heard in.
73 - Jim, K5JTH
Subject: [Dx4win] Is there a blacklist
not use the VE7CC software. I have
made a function Key in the bottom of the DX4Win packet window that is
titled NO BS. It contains the above SET/FILTER command with a few other
additional nuisance spots or comments.
73 - Jim, K5JTH
Subject: [Dx4win] Is there a blacklist feature for Cluster
I like the way HRD handles new modes. It has a user editable file that can be
updated as needed and can be mapped to a current mode if required for uploading
to eQSL or LoTW.
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net
of the broad support of
digital modes that are built in.
73,
Jim - N4ST
-Original Message-
From: ALAN ZACK [mailto:k7...@cox.net]
Sent: Thursday, August 01, 2013 15:00
To: 'Jim - N4ST'; 'Dx4win'
Subject: RE: [Dx4win] Wish list
I looked at HRD at the Visalia Intl DX Convention, even got
Yeah, I have 4000+ digital QSOs logged in DX4WIN where the mode and signal
reports are stored in the comment field, because they are not compatible
with the DX4WIN format. There are a few conveniences, simplicity and
resistance to change that keep me using DX4WIN.
73,
Jim - N4ST
-Original
Don't know about USB to parallel, but I use an FTDI chipset USB to RS232
converter and then a photo-coupler interface to key my rigs and it works
fine with DX4WIN.
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf
Another vote for RT Systems.
Expensive, but fewer headaches.
Some foks have had success with less expensive converters based on the
Prolific chipset, but some counterfeit chips along with a plethora of
drivers and driver updates make these iffy in my book.
73,
Jim - N4ST
-Original Message
if it possible to write the ADIF file directly with the mode
and signal report in the comment field which could then be imported to
DX4WIN.
Never tried it , so don't know for sure.
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun
=UTF8qid=1378515070sr=8-2keywords=Valley+FTDI
73,
Jim - N4ST
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of w1ioo
Sent: Friday, September 06, 2013 20:04
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] connection from radio
Tom,
I have been running DX4WIN with Win 7 64-bit for years. I have not had any
problems. I think there was an LPT driver (?) that had to be installed to
get the hardware CW keying working, but it has been so long ago that I don't
remember the details.
_
73,
Jim - N4ST
-Original
Well, I went to Ham Radio Deluxe. Not a freebee.
A lot of folks seem to like the DX Lab suite.
___
73,
Jim - N4ST
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ROBERT
DEGRIPPO
Sent: Wednesday, January 20, 2016 06:07
To: Dx4win
Hi all, I am a new user, so I am sorry if this has been covered before.
In the packet window, Internet file selection, I select the dx summit http
file , then get a error: not an HTML/TEXT document, any ideas what I am
doing wrong.
Thanks
Dave I am having the exact same problem since belatedly upgrading to Windows
10 on my radio computer, except that after I click through those same two error
messages you are getting, DX4WIN comes up, albeit with some errors regarding
current band and mode, etc. on my FTDX-5000.
Jim, AD1C
ighted, press F3, then Enter.
No subscription required.
Jim, K5JTH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list
.
If you have it working with a 7800, I'd sure appreciate your settings
and/or any help you can provide. Tnx!
73,
Jim, KØJUH
The Old Duck Hunter
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http
Or did these old eyes
missing something. Your thoughts are appreciated.
Jim, KØJUH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.ne
I ordered Thursday and got mine the next day.
Jim Rhodes
K0XU
On Oct 21, 2017 05:54, "ROBERT GARCEAU" <rgarc...@snet.net> wrote:
> What has been the wait time for the key to get sent to the subscriber?I
> sent my order in late yesterday afternoon. Credit card has bee
I would get in touch with Paul to see if there was a glitch. I ordered late
Thursday (or very early Friday) and my key arrived early afternoon Friday.
I wouldn't have expected it till after the weekend, and won't be home to
install it till then anyway.
Jim Rhodes
K0XU
On Oct 21, 2017 08:07
Of course you have to do that after every log import to keep it up to date.
I know I do anyway as I use laptops for portable sessions and need to
cosolidate logs to one place anyway
Jim Rhodes
K0XU
On Tue, Sep 11, 2018, 14:48 w...@att.net wrote:
> Jim/ AD1F
> RR -Very good info
Or, if you are using windiz anyway, you could look in the recycle bin and
try to restore the file.
On Sun, Jun 30, 2019 at 2:47 PM Mike Cizek W0VTT wrote:
> Hello Bob,
>
> Try it and see. If your wsjt log is already gone, you have nothing to
> lose.
> Filter for FT8 QSOs. Do a Count Filter
e seen a couple of comments on this the past month or so but
> > have never really seen an answer to my knowledge.
> >
> > I'm running version 9.0.7.1230 on a windows 10 computer.
> >
> > The past month or so when trying to update the data bases in DX4WIN I run
> >
First place to check is the port setting. Make sure the data rate, data
bits, stop bits and everything else matches. Then make sure correct rig
file is selected.
Jim Rhodes
K0XU
On Sun, Dec 8, 2019, 13:14 Donald Chamberlain wrote:
> I have yaesu 5000 and have signal link hooked from trancei
Before you do anything else! Navigate to the save directory for your Dx4Win
files. Look for a file called something like N2MMLog.~XL. This is the log
file from before the last file save. Now, rename or delete (your choice)
your current log file (like N2MMlog.DXL, then rename the N2MMLog.~XL to
1 - 100 of 4233 matches
Mail list logo