[Dx4win] Parallel Port settings

[Mike Cizek]

Greetings -

Is there a way to change the address for LPT1 (or any other ports) in
DX4WIN?  My new PC doesn't have any built-in parallel or serial ports, so I
got a plug-in card with 2 serial and 1 parallel ports.  Evidently, they do
not use the "default" Windows addresses for ports and DX4WIN cannot find the
parallel port for CW keying.  N1MM has the ability to change the port
addresses, so I was able to make that work, but I cannot find that setting
in DX4WIN.  The serial ports work fine with both programs.

Setup: DX4WIN v 8.05; WIN 7 home premium 64 bit; Gigabyte mobo with i5 CPU;
StarTech PEX2S1P552B port expansion card.

This is NOT an "lptdriver" or "run as administrator" problem.  I am hoping
to avoid having to buy another expansion card, presuming I can find one
which allows me to set the port addresses.

Thanks.

73,

Mike W3MC

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] German DOKs

[Mike Cizek]

Thanks to K7ACZ for posing this question and to SV1DPI for providing the
answer.  The default for DOK used to be sorting by number.  When you got to
that field, you could just type in the first letter, then scroll down to the
proper number.  Would it be possible to make this the default method again?
Or, to be able to just type in the DOK number?  That would save two steps
for each DL card, which doesn't seem like much, but it adds up when you get
50-100 DL cards in each bureau mailing.  

73,
 
Mike Cizek W3MC
Chairman - DXCC East
convent...@ncdxa.org  http://dxcceast.com 
DXCC East is an ARRL approved convention
(410)562-3010


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of dx4win-requ...@mailman.qth.net
Sent: Sunday, 17 June, 2012 12:05
To: dx4win@mailman.qth.net
Subject: DX4WIN Digest, Vol 98, Issue 14

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of DX4WIN digest..."

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN filter question

[Mike Cizek]

Hello George - 

Try this - 

FILTER - type in 2013-01-01 - ENTER.  This should give you all QSOs from 1
Jan.  Then EXPORT this to another log file, say YES when it asks you if you
want to use the filter for the export.  Do your DXCC report on this exported
log file.
There may be an easier way, in which case AD1C will probably anwer.

73,
 
Mike Cizek W3MC

 

-Original Message-
From: George [mailto:goofy...@rochester.rr.com] 
Sent: Wednesday, 30 January, 2013 09:08
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN filter question

I need to filter all my QSO's from 1/1/2013 to 1/31/2013, tomorrow, and only
filter for the unique countries and write to a file that others without
DX4WIN can read. 
We have a contest in our DX club, WNYDXA, for the most countries in the
month of January.
I was able to filter all contacts in January but also need unique countries,
no dup countries.
How can this be accomplished in DX4WIN version 8.05?
Thanks.

George  W2YJ





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] LoTW Inconsistencies

[Mike Cizek]

Greetings - 

First order of business:  Jim, AD1C, thanks a zillion for all the time and
effort you put into databases and those cool utility programs.  Let me know
if you ever get out to the Baltimore/DC area; I'll ply you with good food
and booze.

There appear to be inconsistencies in my LoTW record, and I wonder if any
others have similar issues, or if I am doing something wrong.  A search of
the DX4WIN reflector archives turns up several issues with LoTW not matching
DX4WIN and how to cure that, but I find nothing about inconsistencies within
LoTW itself.

After doing a large LoTW upload, then a DXCC application (and waiting until
it was processed), I ran dx4wlotw.exe, went through all of the mismatches
and changed them so there were no mismatches between my Award Credit Matrix
from ARRL and the DXCC Listing report generated by DX4WIN.  After doing
this, I would expect the CHECKED column in the DX4WIN report to match the
AWARDED column on my LoTW Account Status page, but they are different.  Each
band score is different, and the DXCC Challenge score is over 100 counts
different.  ARRL thinks I have credit for more countries than DX4WIN does,
in each case.

I decided to check by band, starting with 160m.  ARRL gives me credit for
two more countries than DX4WIN lists as being checked. Selecting 160m, All
Credits, sorted by prefix, and comparing that listing to the Award Credit
Matrix, I find two countries on the 160m list that do not have corresponding
X marks in their respective boxes on the Award Credit Matrix.  Clicking on
QSO Details for each of those QSOs shows that they are, in fact, confirmed
through LoTW.  This is not a case of selecting the wrong QSO, or a QSO that
occurred before DXCC records were computerized.  Both of these QSOs are
within the past few years, are the only 160m QSOs with those countries, and
show as confirmed contacts but do not appear in the Award Credit Matrix.

This does NOT appear to be a problem with dx4win or dx4wlotw, but strictly a
LoTW issue.  Have any of you noticed this in your records?  Is there a way
(an easy way, hopefully) to correct it?  Many thanks.

73,
 
Mike Cizek W3MC

 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW Inconsistencies

[Mike Cizek]

Many thanks to all who answered, both to me and to the reflector.
Fortunately, none of you had the correct answer - by which I mean to say
that this was NOT a case of me screwing up the dx4win to LoTW process.

It seems that the Award Credit Matrix on LoTW is NOT updated instantly when
your DXCC application is "completed".  The updated totals will show in your
Account Status report instantly, but the Matrix is only updated after the
DXCC processes your application.  SO I just have to wait.

Patience, young grasshopper.....

73,
 
Mike Cizek W3MC

 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Log for second callsign

[Mike Cizek]

If you want to keep the logs completely separate, shouldn't you use two
separate log files instead of one file with group numbers?  Make a log for
N4GG and another for WA4BTC?  You would need separate keys, etc, for LoTW,
but could merge the two (or more) files there for your DXCC.

73,
 
Mike Cizek W3MC

 

-Original Message-
From: Gerben A.Menting - PG5M [mailto:p...@dx.to] 
Sent: Wednesday, 21 August, 2013 11:35
To: 'Hal Kennedy'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Log for second callsign

Hal,

The group numbers work out very well for me. As said, I do maintain all my
DXpedition calls and PG5M contests in a single log, but using the group
numbers to identify the respective call/contest. Now with incoming QSL's, I
just type in the call and get all QSO's listed that I worked, regardless the
DX-call or contest. Next I can confirm the respective QSO's. A the time of
printing, I let the program also print the group number at the bottom of the
label (this is a tick box in the QSL printing menu). Now all QSL labels come
with the call associated with the group number. Example: "You worked 3D2GM"
or "You worked PG5M CQWWCW". With all the sheets with labels in front of me,
I peel off the label and can see on what QSL card I have to stick the label.

The benefit of this process is that you don't need to run label printing for
each call sign. Especially when people send me QSL requests for different
call signs, I can confirm in one go, instead of opening different
logs/databases to check the different calls.

Regards,

Gerben - PG5M

-Original Message-
From: Hal Kennedy [mailto:hal...@comcast.net] 
Sent: woensdag 21 augustus 2013 16:41
To: Gerben A.Menting - PG5M
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Log for second callsign

Thanks Gerban,

I have gotten this far.  I cant seem to label groups 1 and 2, but as long as
they are numbered I can always figure that out later.  As a stand along
long, I found it troubling that the callsign in "preferences" was not the
old callsign but locked down to the new one.  
I suppose in the end this does not matter.

Thanks for the help & 73
Hal N4GG & WA4BTC


On 8/21/2013 10:21 AM, Gerben A.Menting - PG5M wrote:
> Hal,
>
> To be more precise on how I handle this, do the following.
> You have your current log which may be called MASTER or N4GG (whatever 
> name you use).
> Assuming you have the other logbook already in an electronic format, 
> create a new log (File | New) and give it a name (you can use the call 
> sign for that log). Next you have to indicate the group number for the 
> QSO's in this log. Go File | Preferences | QSO, and fill 2 in the 
> Group field. I assume you have 1 for the first log.
> Next import all the QSO's into this log.
>
> Now you can handle the 2 different logs accordingly or you can merge 
> the two logs. To do the latter, take the following steps:
> First open the first log (MASTER or N4GG in this example).
> Next: File | Import | and chose DX4WIN8 I/E and chose from the menu 
> File | Import. Follow the next steps to select your file with the 
> second log and import it. Save the log.
>
> Now go to the menu and chose Filter | Edit Group Names (look in the 
> manual how to do this) and give a name to the group numbers. In your 
> case 1 is N4GG and 2 is the other call. Once ready, you will have all 
> calls in one log but you can see for which call the QSO is (assuming 
> you have selected "group field" in your logbook report.
>
> Success,
>
> Gerben - PG5M
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net 
> [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of Hal Kennedy
> Sent: woensdag 21 augustus 2013 15:09
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] Log for second callsign
>
> Trying to set up a completely separate log for an old call-sign of mine.
> Starting DX4WIN my call and name are already in [preferences] and 
> can't be changed.  How can I enter a new call - same name?
>
> Hal
> N4GG
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
>



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Data Updater v. 7.01 released

[Mike Cizek]

Hello Dennis -

Your attachment didn't come through the reflector.  Perhaps the program 
was never installed properly?  There are three files:

dx4wupd.exe
dx4wupd.ini
dx4wupd.rc

Do a search for dx4wupd.* Windows Button; type in the box that says 
/Search programs and files /and see what you get.  Mine didn't find 
anything on the first search, so I had to tell it to search again in 
Computer (WTF?!?  Ohthis is Windozenever mind) and it finally 
found them.  Just delete them and install the new version.  Maybe reboot 
after deleting and before installing.  Make sure you install the new 
version in the same directory as the main DX4WIN program.  I made a 
separate directory called Radio_Programs (catchy title, eh what?) and 
keep everything in there:


C:\Radio_Programs\dx4w805
C:\Radio_Programs\N1MM Logger+
etc...

Jim - please correct me if I told him anything wrong!

GL.  73,
Mike W0VTT

On 19-Mar-15 14:09, RadioDen45 wrote:
Thanks for all who replied, but, if you can find "DX4WIN updater" 
alphabetically in this list you have better eyes than I have  See 
attachment.  Something's strange here. It's V6.02 I'm trying to 
uninstall, but wait, I notice V6.04 in my dx4win805 folder and V6.02 
is not to be found


I'm running W7 with all updates.  I'm thinking I did something wrong 
when I tried to install V6.04...  So how do I uninstall the updater if 
it isn't in the uninstall list and I see no uninstaller for it in the 
dx4win805 folder?


Thank you in advance for all the help!  Dennis, k0eoo

-Original Message- From: Jim Reisert AD1C
Sent: Thursday, March 19, 2015 12:22 AM
To: DX4WIN Reflector
Subject: [Dx4win] DX4WIN Data Updater v. 7.01 released

I've released DX4WIN Data Updater v. 7.01.  The release notes are below.

I recommend that if you have installed a previous version, that you
uninstall it, from the Windows Control Panel (Programs and Features).
This will not remove your custom settings. Then install the latest
version of the program:

   http://dx4win.ad1c.us/updater/#history

There have been extensive changes, mostly in the area of error
checking.  If you have any problems during the installation, or with
running the program itself, please let me know ASAP.

Here are the release notes:

7.01 - 19 March 2015
   * Bug fix: ignore corrupt DX4WUPD.INI (settings) file
   * Bug fix: use all possible methods for checking if DX4WIN is running
   * Bug fix: last line in DX4WIN.TCP (DX cluster nodes) wasn't being
added. Apologies to ZS6RO
   * Bug fix: direct all internal errors to a pop-up error message window
   * Feature: real Windows installation program
   * Feature: Update button is disabled until the user chooses at
least one data file to update
   * Other: -help and -version options work on the command line (again)
   * Other: BIG code cleanup (Perl Best Practices, etc.)

There is still at least one user out there who is having problems. I'm
hoping that this new version will bring those problems into the light,
so they can be solved.

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 
__

DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] call sign look up

[Mike Cizek]

Hello Courtney,
That feature does not exist in dx4win. To use it with another program, you must 
be an XML subscriber with QRZ. 
I just keep QRZ open in a browser window and look up calls that way.  
73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Courtney Judd  Date: 
7/7/17  07:07  (GMT-06:00) To: Dx4win@mailman.qth.net Subject: [Dx4win] call 
sign look up 
question for the group I have " https://www.qrz.com/lookup/ " listed 
under preferences/ext data/website callsign lookup  enabled box 
checked...but it didn't seem to work at all. So what do you all use... 
what works the best? Maybe QRZ is not free? Thanks for any ideas... 
thanks and 73's Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4Win Version 9 Teasers ??

[Mike Cizek]

 Hello Mike,
Paul announced sometime last summer that version 9 was in beta testing.  He has 
not announced a release date and likely will not until he is sure it is ready 
for prime time. 
73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Mike Rhodes  Date: 
9/15/17  21:39  (GMT-06:00) To: DX4WIN Reflector  
Subject: [Dx4win] DX4Win Version 9 Teasers ?? 
Just wondering if there are any teaser bits of info regarding Version 9 
that inquiring minds might be privy to? Is it in Beta test yet? Release 
candidate ? Features that are simply going to blow us away?

Inquiring minds really would like to know,
Mike / W8DN
DX4Win Since Version 0.97

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Upgrade from 8.05 to 9

[Mike Cizek]

Version 9 will run on XP Pro.  I tested it on an old IBM ThinkPad but did not 
try it with a radio connected. 
Ron, it doesn't update automatically like Windows. We control when we ask for 
updates.  I'll try exactly what you propose to do and let you know if it works. 
73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Jim Reisert AD1C 
 Date: 10/20/17  08:03  (GMT-06:00) To: Ron Polityka 
 Cc: DX4WIN Reflector  Subject: Re: 
[Dx4win] Upgrade from 8.05 to 9 
On Fri, Oct 20, 2017 at 3:42 AM, Ron Polityka WB3AAL wrote:

> Can I download the Version 9 onto a flash drive and install it to my Win XP
> Pro machine that is not connected to the Internet?

Download 9.01 and try it.  You can not save or print without a license
key.  This way you can tell whether it works on XP or not before
spending money on an upgrade.  Post your results to the reflector.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Ver 9 Payment?

[Mike Cizek]

Go to http://dx4win.com/ , click on Order on the left.  It will take you to
the secure order form.

73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Mike Greenway  
Date: 10/20/17  16:04  (GMT-06:00) To: DX4WIN@mailman.qth.net Subject: [Dx4win] 
Ver 9 Payment? 
I see all the details on using it but where do you pay for the upgrade to get 
the key?   I don’t see anything on the website about upgrading to V9 and if it 
was on the reflector I missed it.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] V9 Log File

[Mike Cizek]

 Hello Bert,
No, you cannot. The file format is different in version 9. Save your v8 file 
separately before putting it in v9. 
73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Bert Garcia N8NN  
Date: 10/20/17  18:33  (GMT-06:00) To: dx4win@mailman.qth.net Subject: [Dx4win] 
V9 Log File 
Can I open a Ver9 log file with the Ver8 program?  That is, can I go back to
Ver8 if I want to without losing QSOs added to my log with Ver9?

Bert N8NN

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Grids

[Mike Cizek]

I tried adding HF bands to the built in VUCC award but that didn't work for 
some reason.  
73,Mike Cizek WØVTT 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Bill Maddock via DX4WIN 
 Date: 4/19/18  14:05  (GMT-06:00) To: 
jjreis...@alum.mit.edu, j...@w9rpm.com Cc: DX4WIN  
Subject: Re: [Dx4win] Grids 
We would need 2 letters/ 2 numbers. It would be awesome if it worked on HF also.
Thanks and 73
Bill N4ZI

Sent from Yahoo Mail on Android 
 
  On Thu, Apr 19, 2018 at 11:43 AM, Jim Reisert AD1C 
wrote:   On Wed, Apr 18, 2018 at 5:28 PM, W9RPM wrote:

> I don't suppose that a way could be had to have a window like the VUCC Grid
> window to track grids on HF?

Maybe Paul could modify the display of the "CQ DX Field" window, to
optionally support either just 2 letters, or 2 letters + 2 numbers.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n4z...@yahoo.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
  
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] exporting

[Mike Cizek]

Hello Steve,Try using a Selection. Filter> Selection, enter a name, enter the 
dates, check date filter, update, add. After you do the export, make sure to 
change the filter back to All QSOs. 73,Mike Cizek WØVTT Sent from my Verizon, 
Samsung Galaxy smartphone
 Original message From: steve sala  Date: 
2/21/19  17:59  (GMT-06:00) To: dx4win@mailman.qth.net Subject: [Dx4win] 
exporting I am trying to make an ADIF file of my contacts for the last year to 
send up to ClubLog.  I cannot figure out how I filter for just the last year.  
When I go to the help, most of the info on filtering seems to be for importing, 
not exporting.  Any guidance?73Steve 
K7AWB__DX4WIN 
mailing listHome: http://mailman.qth.net/mailman/listinfo/dx4winHelp: 
http://mailman.qth.net/mmfaq.htmPost: mailto:dx4...@mailman.qth.netThis list 
hosted by: http://www.qsl.netPlease help support this email list: 
http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Importing county line QSO's

[Mike Cizek]

Hello Mark,

Try reducing the amount of time for duplicate QSOs; the default is one 
minute.


File > Preferences > Import > Time window to match QSO in secs (my logs)

73,
Mike Cizek W0VTT

On 26-Aug-19 08:28, Mark Endorf wrote:

I think this has been addressed before, but what is the easiest way to
import an ADIF file containing county line QSO's?
DX4WIN will stop the import operation, interpreting it as a duplicate QSO.
Thanks!

Mark WA0MHJ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] How to open cluster window and bandmap?

[Mike Cizek]

Hello Dennis,

Files > Preferences > Packet1
Type = Regular
COM Port = TCP/IP (unless you're using an external packet modem & 2m)
Baud Rate = 9600
Flow Control = None
Data/Parity = 8 bits/no parity

Packet2

Cluster node auto connect (if you want auto)
Enabled = checked
Node address = choose your favorite, I use VE7CC-1>Whonnock-BC,ve7cc.net
Enter your callsign
Keep alive = 5 (this pings the cluster every 5 minutes, helps keep you 
from getting disconnected)


73,
Mike Cizek W0VTT

On 17-Sep-19 15:47, radiode...@gmail.com wrote:

Some how DX4WIN got corrupted ands wouldn't load.  I uninstalled and
reinstalled (version 9), did the update and connected to my log but all my
setup files were gone!

I had saved setup pictures of the various tabs for PREFERENCES and so far
all seems to be working OK...

My question, how do I open the cluster/connect window to start getting spots
and the bandmap??  Its been so long I forgot, LOL

Regards, Dennis, k0eoo

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul van der Eijk
Sent: Thursday, June 27, 2019 12:59 PM
To: David Kozinn, K2DBK 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import

I think changing the mode/submode of the old FT4 QSOs will avoid this. When
matching QSOs for import the sub-mode is now looked at too. See Multiple QSO
Operations | Change mode/sub-mode; use this after setting a filter!

--Paul

On Thu, Jun 27, 2019 at 1:12 PM David Kozinn, K2DBK  wrote:


By any chance, were those FT4 QSOs? (That'll only make sense if you're
using the most recent release candidate).

I saw something similar with my first import, but it was fine after that.

-Original Message-
From: dx4win-boun...@mailman.qth.net 
On Behalf Of paul.w...@gmail.com
Sent: Thursday, June 27, 2019 10:35 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import

Importing QSOs from wsjtx_log.adi into DX4WIN log.  Specify to ignore
dupes.
In 9.0.4 this worked nicely, only importing new QSOs.
Now with 9.0.5 it created approximately 140 duplicate QSOs out of
1000+ QSOs in the wsjtx log.
These added Qs differ by a minute.

The import preferences are the same for both versions of DX4WIN 60 & 1800.

Any ideas?

Paul  W2LE

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html



--
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Add bands in the DXCC window

[Mike Cizek]

Hello Luc,

You need to add them as Valid Bands and Award Bands for DXCC:

File > Awards > DXCC

73,
Mike Cizek W0VTT

On 25-Sep-19 07:24, Luc wrote:

Hi.
In my DX4WIN ver.8.05, I can add the bands that I want to appear in the
DXCC window, I can add or remove bands, without any problem.
My friend EA8TH who also has the same version, does the same as me, is
going to:
File / Preferences / Station
Make the changes (add the 60 meter band) comes out with Save Changes and
exit, but do not save the changes.
I have also checked in File / Preferences / Personal, that Expert mode is
activated in User Level.

Any suggestions?

EA8AM 73 & DX's




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FT 4 ?

[Mike Cizek]

Hello Andy,

It's already there.  Mode = MFSK; Sub Mode = FT4
This is the way it is set up in the ADIF spec.

73,
Mike Cizek W0VTT

On 08-Oct-19 21:11, Andy-UA0BA wrote:

Hello to ALL !

There is a new mode - FT4.

I want to start it to make a QSO.

Will this new mode be added to DX4WIN ?

Thank you!



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Comments in logbook?

[Mike Cizek]

Use your own callsign. Then, when you want to search for notes (F8) just type 
your own callsign.73,Mike Cizek WØVTT Sent from my Verizon, Samsung Galaxy 
smartphone
 Original message From: Tom Doligalski via DX4WIN 
 Date: 6/19/20  15:26  (GMT-06:00) To: DX4WIN Reflector 
 Subject: [Dx4win] Comments in logbook? Years ago, in 
the dark ages before we had electronics logs, it was very convenient to write a 
comment in the logbook. Something like “new dipole” or “new radio”. I would 
like to suggest a similar function for dx4win. Maybe have the program recognize 
and entry made with the callsign field starting with the #sign as a comment. No 
entries for qsl, etc. but just day, time, notes for this qso. Maybe the current 
frequency and mode. Items would appear chronologically in the log, but nowhere 
else. Not sure how difficult this would be, but it would be very useful, albeit 
only used occasionally. 73, Tom W4KXSent from my iPad 
__DX4WIN mailing 
listHome: http://mailman.qth.net/mailman/listinfo/dx4winHelp: 
http://mailman.qth.net/mmfaq.htmPost: mailto:dx4...@mailman.qth.netThis list 
hosted by: http://www.qsl.netPlease help support this email list: 
http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Importing QSL requests into DX4WIN from ClubLog

[Mike Cizek W3MC]

Would it work if you used File | Preferences | QSO | Label/Upl Flag and
checked QSL Card?  That way, each QSO you imported should be marked to send
a QSL.  You would have to do separate imports for buro and direct, changing
the QSL Method for each.

Many thanks to AD1C and SV1DPI for all the work time and effort you put in
to this!

73,

Mike W3MC 

-Original Message-
From: Lee Hallin [mailto:hall...@lanecc.edu] 
Sent: Saturday, 16 November, 2013 05:45
To: Jim Reisert AD1C; DX4WIN Reflector
Cc: John Warburton G4IRN
Subject: Re: [Dx4win] Importing QSL requests into DX4WIN from ClubLog

Hi Jim, John and others,
 
I am actually working on this for Joe (OZ0J / 5Q2T) -- see his post from Sep
24th at the end of this email.
 
I haven't done ClubLog yet so if anyone else has variations of what they
would like done by a utility I'm writing, please speak up now :-)
 
Also, mention what version of DX4WIN you are using.
 
My "plan A" is to write something that would create a .DXL file but I don't
yet know if that is possible.  
My "Plan B" would be to have you do an "export", run my program against the
export and then re-import the new results to DX4WIN.
 
Plan A is more handy for the user (ONE step) but "Plan B" is more versatile
and perhaps easier to adapt to future versions of DX4WIN.
 
I "hope" to have something to test by the end of next weekend (Nov 24th).
 
73, Lee  N7NU


>>> Jim Reisert AD1C  11/15/2013 5:53 PM >>>


-- Forwarded message --
From: John Warburton G4IRN 
Date: Fri, Nov 15, 2013 at 4:18 AM
Subject: [Club Log] Importing QSL requests into DX4WIN
To: Club Log 


Hi gang

I am using OQRS for my overseas trips and have download several ADIF
files containing details of bureau and direct requests.

My main logging programme, from which I manage QSL printing is DX4WIN.

Has anyone found a way of importing the Clublog produced ADIF file
into DX4WIN and setting the QSL label and method flag, ready for
printing?

I suspect it isn't possible! Anyone else use a similar set-up? Do I
need to check the DX4WIN entries manually?

How do others update their logs from the QSL request ADIF files
produced by Clublog?

Thanks

John G4IRN.
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

!SIG:5286d020308741603512839!
 
>>> "Joergen "Joe" - OZ0J"  9/24/2013 10:19 AM >>>


Hi 

I am QSL manager for some calls and I would like to import the OQRS ADIF
file from www.clublog.org info DX4WIN.

The QSO's are already in DX4WIN, but I would like to update the QSL status
meaning that the stations who want a buro QSL card will get one after I have
updated the stat us from the OQRS Clublog file.

An example of the clublog ADIF file can be seen at
https://dl.dropboxu
sercontent.com/u/2651703/5Q2T-clublog-qslrequests-2013-09
(
https://dl.dropboxusercontent.com/u/2651703/5Q2T-clublog-qslrequests-2013-09
) 
-23.adi

I get an e-mail with whose stations that want a QSL card. The e-mail can be
seen at https://dl.dropboxusercontent.com/u/2651703/clublog-qsl-e-mail.pdf

I stead of going through all the e-mails manually, I would like to import
the ADIF file so DX4WIN update these data:

Label change from N to Y (only for those that have not been sent already)
Method change from Buro to Direct if it is a direct QSL card.

I have tried to import the ADI F file via File -> Import/Export and set the
imported QSOs to "replace". That was not the solution I was looking for.

Do anyone have a solution ? Or is it manually work?


Vy 73 de OZ0J / 5Q2T

Joe


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Tuning indicator with MMTTY?

[Mike Cizek W0VTT]

Hello Eric - You must also open MMTTY from the programs menu (or where 
ever you put it).  I use rtty very infrequently and just had to learn 
that again this morning.


73,
Mike W0VTT

On 14-Jan-15 13:53, dx4win-requ...@mailman.qth.net wrote:

  [Dx4win] Tuning indicator with MMTTY?


Content-Type: text/plain; charset=ISO-8859-1

All I see when I bring up the RTTY window in DX4Win 8.05 is the text
screen, no tuning indicator.

Is this normal, or have I bdone something wrong?

73,
Eric E3DQ



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Digest, Vol 129, Issue 6

[Mike Cizek W0VTT]

Hello Isidro -

Try saving your log in a "My Documents" folder.  I have been doing this for 
years, and it works very well because the log gets saved to my backup along with all of 
the other documents.  It worked fine in WinXP and works with Win7; it should work with 
Win8 as well.  GL.

73,
Mike W0VTT


Date: Tue, 20 Jan 2015 02:36:07 +
From: "Isidro Acosta Hernández"
To: "Dx4win Foro"
Subject: [Dx4win] DX4WIN and Windows 8.1
Message-ID:
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

Hello all.

A friend of mine, also a DX4WIN v8.05 user, has just installed it in his new
laptop with Windows 8.1.  As suggested by instal program, he installed it in
c:\dx4win805.  Now, each time he tries to save the log file (either typing
Alt-S or going to File > Save), he gets this message:

An exception occurred!
Unable to create directory
[ok]

But the file is saved correctly.

My friend re-installed the program in c:\program files\dx4win805.  Now, no
error message appears, but, he noted that the log file is no longer stored
in the save folder, but in:

c:\users\{username}\appdata\local\virtualstore\program files\dx4win805\save

Question:  Is there a way to disable the above error messages when
installing DX4WIN in root directory, or to save the data files in the
DX4WIN's own save folder, not in "c:\users\{username}\local..."?


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Future Addition to the QSL "Method" window

[Mike Cizek W0VTT]

Hello Ron,

I have been using  for Clublog and any other OQRS what uses PayPal.

73,
Mike W0VTT

On 19-Apr-15 14:04, WB3AAL wrote:

Hello,

  When and if there is an update to the DX4Win program beyond the 8.05
version, it would be nice to add ClubLog into the QSL "Method" window.

73
Ron Polityka
WB3AAL



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ER1LW

[Mike Cizek W0VTT]

Hello William,

A quick check of ES1TU's page shows several folks have received cards 
from him, but none recently:

http://adok.dyndns.org/stat?call=er1lw
ER1MM is quite active and he uses LoTW.  GL.

73,
Mike W0VTT

On 11-Jun-15 14:53, William Osborne wrote:

Hi Folks,

  


I am trying to confirm ER with this station (ER1LW) for CW.  I have sent
money to his PayPal account and several emails but I have not received any
response via email or smail. Has anyone been in contact with him recently?

  


Thanks,

William Osborne-K5ZQ

   wosborn...@gmail.com

270-205-9565

  


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Import WPX LOTW confirmations into DX4WIN?

[Mike Cizek W0VTT]

Hello Mark,

Try using "Download Report" on the left hand side of the awards tab.  
That has all of your confirmed QSOs in it.


--
73,
Mike Cizek WØVTT



On 31-Dec-15 14:39, Mark via DX4WIN wrote:

Happy New Year everyone.

  


I have a couple of thousand WPX confirmations on LOTW that I would like to
bring into my DX4WIN log file.

  


Does anyone out there know of an easy way to import that "confirmed"
information into the DX4WIN log?  I don't want to go through the exercise of
manually updating each one of the relevant QSOs.

  


Tnx & 73,

  


Mark, K6FG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] list of worked/confirmed calls per continent?

[Mike Cizek W0VTT]

Hello Joe,

For Worked All Europe, you can get the report under:
Reports | Custom
then select: Worked All Europe - CW or Worked All Europe - SSB

--
73,
Mike Cizek WØVTT



On 02-Jan-16 09:47, OZ0J Joe wrote:

Hi

  

  


Happy New Year

  


I would like to find the DXCCs, that I am missing in several modes to hunt
e.g. Worked All Europe and Worked All Continents. I know the report DXCC ->
Needed Listing, but are looking for a report only for DXCCs to Worked All
Europe.

  


It could also be interesting to find the confirmed paper QSLs to the same 2
mentioned awards.

  


Is there any way to get a report or file where I have the continent of all
QSOs?

  

  


73 Joe OZ0J

  

  

  

  

  


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN, LoTW, and the DXCC Award

[Mike Cizek W0VTT]

Hello Ed,

The answers to all of your questions can be found here:
http://dx4win.ad1c.us/

DX4WIN does not communicate directly with LoTW.  You use Trusted QSL to send
your information to LoTW and AD1C's Compare DXCC to LoTW utility to take
your LoTW account and compare it to your DX4WIN log.  There are several of
us on here who are happy to help you, but please read all of Jim's
instructions first, and that will likely answer many, if not all, of your
questions.  GL.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ed
Douglass
Sent: Tuesday, February 02, 2016 22:14
To: DX4WIN Reflector
Subject: [Dx4win] DX4WIN, LoTW, and the DXCC Award

I would appreciate some help to more thoroughly understand in what ways
DX4WIN (v.8.05) "communicates" with the Logbook of The World program (LoTW)
and possibly also with the DXCC desk at the ARRL.  I haven't been able to
find answers to my questions using the HELP services in DX4WIN.

The ability of DX4WIN to export my logs to LoTW and for LoTW to send a
report of successful matches back to DX4WIN is wonderful.  It is not clear
to me, though, if DX4WIN also communicates with the DXCC desk at the ARRL
with regard to paper QSL cards that have been checked, submitted, and
approved.  Does DX4WIN have this ability as well?

What about the meanings of the letters W, L, M, C, S, and the asterisk(
"*") in the DXCC Listing report?

The "W" (for station worked) seems clear enough.

The letter "L" seems to mean that I put a "Y" in the box under "Label" in
the QSO window, asking DX4WIN to mark a QSO so that a label can be printed
later.  Does the "L" mean anything else?

The DX4WIN instructions say that the letter "M" means I mailed a QSL card
for a contact I made.  What is the "trigger" in DX4WIN that causes an "M"
to appear?  Is it that I have entered a date in the "QSL Date" boxes? Not
that I have put a "Y" indicating I want to create a label?  Am I right that
the "M" has to do only with my outgoing paper QSL cards?

The DX4WIN instructions say that a "C" means a QSO has been confirmed.
Confirmed by whom?  Is this because LoTW found a match to my QSO?  Or is it
because the DXCC desk knows I have a valid paper QSL card for the QSO and
tells DX4WIN about it?  Or is it because I have received a paper QSL card
and I have entered a "Y" in the "Cnfm" box?

Does an "S" (for submitted) mean that I have exported a QSO to the LoTW
program but a match was not found at the time of export?  If the other
operator exports his or her logs to LoTW after my submission, does LoTW
remember that I am still looking for a match?  Or do I have reset the
upload flag and clear the date of the original export in order to try again
for a match?  Does the "S" also signify that I have submitted a valid paper
QSL card to the DXCC desk at ARRL?

Finally, the asterisk ("*") is said to mean that the QSO has been approved
for the award.  Approved by LoTW (because LoTW found a match)?  Approved by
the DXCC desk at ARRL (because I submitted a valid paper QSL card?)  Or
does the asterisk mean simply that a matched (or Confirmed?) QSO meets the
rules of the DXCC award program?  Does the asterisk have anything to do
with paper QSL cards that have been checked and submitted to the DXCC desk?

I look forward to some help.

73 de Ed, AA9OZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Deleted Countries

[Mike Cizek W0VTT]

Kingman (and all other deleted countries) still count towards your mixed,
phone, CW, rtty, and individual band DXCC totals.  They do not count for the
Honor Roll or the DXCC Challenge.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of David
Kozinn, K2DBK
Sent: Saturday, April 30, 2016 16:56
To: wosborn...@gmail.com; dx4win@mailman.qth.net
Subject: Re: [Dx4win] Deleted Countries

Unless I'm missing something, KH5K is still Kingman reef, it's just no 
longer a "counter" for DXCC purposes.


On 4/30/2016 5:14 PM, wosborn...@gmail.com wrote:
> Jim,
>
> I just updated my country file using you excellent updater. But, (here 
> comes my dumb question) nothing changed in my log except I now have 
> 339 checked. When I search for KH5K it still comes up as Kingman Reef, 
> is this right?
>
> Thanks,
>
> William Osborne--K5ZQ
>
> 270-205-9565
>
> wosborn...@gmail.com
>
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Report that shows Labels to be printed?

[Mike Cizek W0VTT]

Hello Greg,

You can do a filter (F8) with label set to Y.  It's not a report, but will
give you a list of just those QSOs.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of GC
Sent: Thursday, May 26, 2016 08:09
To: dx4win@mailman.qth.net
Subject: [Dx4win] Report that shows Labels to be printed?

Is there a report that I can initiate to show what Q's are scheduled to have
a label printed?  I can see where I can CLEAR the flags/PRINT etc,  Just not
sure how to see whats in the que.ThanksGregK9IG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LOTW

[Mike Cizek W0VTT]

Hello Cort,

There are two ways to do it:
1. Do a date filter(F8) in DX4WIN.  Set Preferences|QSO|QSO Date to "Greater
Equal".  This will give you all QSOs from 9 Mar 16 to present.  Now do an
export to LoTW and answer YES to "Filter active, use it for export?".
DX4WIN will remember the date of your last LoTW upload so it won't be an
issue next time.
2. Export everything and use the QSO Date Range filter in TQSL to select 9
Mar 2016 to present.

After you do the export and upload, in the QSO window, do LoTW|Set LoTW
Upload Date for everything.  This way, DX4WIN will think you have already
uploaded everything (even the QSOs you uploaded from Writelog) and not try
to upload them again.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Thursday, May 26, 2016 08:52
To: Dx4win@mailman.qth.net
Subject: [Dx4win] LOTW

hey guys, need some help with sending the last few months to LOTW. The 
dates would be Mar 9,2016 to today. Everything I try to do it wants to 
send the whole 120,000 qsos in my log. Most of my lotw postings are thru 
Writelog which is so easy. Maybe there are just some simple steps to do 
this also. Reading the help files just confuses me even more... old 
timers i guess lol, thanks, 73's Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Help with Printing QSL-labels

[Mike Cizek W0VTT]

Hej Goran,

It sounds like the QSL Label Flags got changed.  You can do a print preview
to see how many labels it wants to print, then reset the ones you don't want
to print back to N. 

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Göran
Lundell
Sent: Thursday, August 18, 2016 07:41
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Help with Printing QSL-labels

Hello,
I had  DX4WIN 8.05 installed on my Windows XP, which broke down.
Now I have installed DX4WIN on one Windows 10 and one Windows 7 ultimate.
In both cases I can now not print QSL labels.
What happens is that when I press print (in the same way and settings that
I had done for so many years with my XP) the program starts to GENERATE
PAGES with an increasing number without seemingly any practical end to it..
Everything else seems to work fine.
Anyone who can guide me how to fix this?
Goran
SM0CMH,  SV5/SM8C
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Help with Printing QSL-labels

[Mike Cizek W0VTT]

Hej Goran,

That is beyond me, sorry!  Perhaps someone else on the list will have an
answer that will work.

--
73,
Mike Cizek WØVTT 

From: Göran Lundell [mailto:glunde...@gmail.com] 
Sent: Thursday, August 18, 2016 08:20
To: Mike Cizek W0VTT
Subject: Re: [Dx4win] Help with Printing QSL-labels

Hi Mike and thanks .
I am not sure I understand what to do so: I go to print and instead of
PRINTER I choose PREWIEV and it starts counting pages and continues when it
reaches one million. In this particular data base I have some 40.000 QSO:s,
so it seems that soimething is really amiss  For every QSO there is a No for
print. I have also reset all print items.
What to do?
73
Goran


2016-08-18 14:55 GMT+02:00 Mike Cizek W0VTT :
Hej Goran,

It sounds like the QSL Label Flags got changed.  You can do a print preview
to see how many labels it wants to print, then reset the ones you don't want
to print back to N.

--
73,
Mike Cizek WØVTT
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Göran
Lundell
Sent: Thursday, August 18, 2016 07:41
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Help with Printing QSL-labels

Hello,
I had  DX4WIN 8.05 installed on my Windows XP, which broke down.
Now I have installed DX4WIN on one Windows 10 and one Windows 7 ultimate.
In both cases I can now not print QSL labels.
What happens is that when I press print (in the same way and settings that
I had done for so many years with my XP) the program starts to GENERATE
PAGES with an increasing number without seemingly any practical end to it..
Everything else seems to work fine.
Anyone who can guide me how to fix this?
Goran
SM0CMH,  SV5/SM8C
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] wrong heading for a specific call?

[Mike Cizek W0VTT]

TZ4AM has his grid square set to FK52 on LoTW. 

73,
Mike Cizek W0VTT

Sent from my Verizon Wireless 4G LTE DROID

Jim Reisert AD1C  wrote:

>On Wed, Aug 31, 2016 at 3:42 PM, Rick K0XB wrote:
>
>> I wonder if anyone has an idea why this is going on: I entered the callsign
>> "TZ4AM" into the main window on DX4WIN, and it told me the heading was 143
>> degrees. I'm in Minnesota, so this is obviously incorrect for TZ. But if I
>> enter any other TZ call, it tells me the heading is 78 degrees, which I
>> believe is correct. Why would it show an incorrect heading for a specific
>> call?
>
>DX4WIN probably inherited a grid square (or IOTA ?!?) from a previous
>QSO with TZ4AM.
>
>-- 
>Jim Reisert AD1C, , http://www.ad1c.us
>__
>DX4WIN mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:DX4WIN@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN DATA UPDATER INSTALLATION PROBLEM

[Mike Cizek W0VTT]

Hello Noll,

Check the properties of the updater icon.  Does it still point to the older
version?

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of noll
amidzich
Sent: Tuesday, October 04, 2016 14:40
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN DATA UPDATER INSTALLATION PROBLEM

Esteemed members,

 

I am new to this reflector and this my first post.  I apologize in advance
if this issue has been previously discussed...

 

Have been using V 7.07.02 without issues.

 

The other day decided to download V8.05.

 

Per instructions on Data Updater web page downloaded 8.05 in the same
directory as 7.07.02

 

Download went very quickly and smoothly, NO error messages.  " DX4WIN Data
Updater" icon appeared on desktop.

 

So far, so good..

 

Double Clicked on "updater" icon and "wheel" on icon spun for about 2
seconds and stopped without opening program.

 

Repeated this process several times with same results.

 

Proceeded to control panel and Uninstalled updater program.

 

Reinstalled. no problem, no errors, and icon reappeared on desktop.

 

Double clicked again on "updater" icon with same results.

 

Am running Windows 10.

 

Not sure what to do next?

 

73

 

Noll W9RN

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Help

[Mike Cizek W0VTT]

Hello Dwayne,

The license file should be in the dx4w805 folder and should be named
ve6qx_lic.dx4w8  GL.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dwayne
Sent: Tuesday, November 15, 2016 11:57
To: dx4win@mailman.qth.net
Subject: [Dx4win] Help

Iam trying to put my Lic into a new copy of Dx4win 805, I moved the lic out
of the old program on to the desk top and then downloaded a new Dx4win 805
and moved the lic from the desk top into the program. when trying to bring
up the new 805 it says it can't find any lic.and of course can't save any
contacts Tried putting the lic in the save folder and the first folder
that cmes up no luck.. 
  Not very good at running around inside my computer..
  Any help out there as where to install it exactly..
 Or maybe new lic. required .???/
 Tnx   Dwayne   Ve6qx
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Spots in different windows

[Mike Cizek W0VTT]

Hello Terry,

The spots in the DX Spots window are filtered by what you need on certain
bands and modes.  You can set and change those filters in Files |
Preferences | Packet 1 (Spots to Ignore & Prefixes/Zones for Spotters);
Packet 2 (Colors for DX Spots) and Packet 3 (Bands and Modes).  GL.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
t.cell...@mchsi.com
Sent: Monday, November 28, 2016 13:07
To: dx4win@mailman.qth.net
Subject: [Dx4win] Spots in different windows


  I am trying to understand why there are DX spots showing up in my packet
window
  that do not show up in my DX spot window. If there are spots that show up
in the
  packet window, I can force them to show up in the DX spot window by doing
a 
  SH/DX and they will appear. Any ideas?  W0AWL Terry
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Upgrade from ver 5.03 to ver 8.05

[Mike Cizek W0VTT]

Hello Joe,

The missing and changed QSOs are most likely because the country database
was updated when he upgraded to 8.05.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of OZ0J Joe
Sent: Sunday, 11 December, 2016 01:10
To: dx4win@mailman.qth.net
Subject: [Dx4win] Upgrade from ver 5.03 to ver 8.05

Hi


A friend of mine have tried to upgrade from version 5.03 to version 8.05. 

I have not seen the errors, but he has informed me, that some of the CW QSOs
are missing/changed the prefix (DXCC). There is no problem with the SSB
QSOs.

Could it be the jump from version 5.03 to 8.05 that is too difficult?


73 Joe, OZ0J

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Error in DXCC report - version 8.05

[Mike Cizek W0VTT]

Hello Joe,

CW QSOs before 1975 DO count for mixed and single band DXCC awards, so your
DX4WIN report is correct.  The award for CW only DXCC started on 1 January
1975, so only QSOs made after that date count.

The CW DXCC award does not count individual bands.  It only counts the
number of countries (entities) starting on 1 Jan 1975 and it doesn't matter
what band, or how many bands you have.

I hoe this makes sense to you, and to Leif.  If not, perhaps someone else
can explain it differently.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of OZ0J Joe
Sent: Tuesday, 13 December, 2016 13:52
To: 'DX4WIN'
Subject: [Dx4win] Error in DXCC report - version 8.05

Hi


I earlier got the information that CW QSOs before 1 January 1975 do not
count for DXCC. Since that I have tried to help my friend OZ1LO to find out,
whatever there is an error in the DXCC report in DX4WIN version 8.05.

I have created a log with 2 QSOs on 80 M. Both QSOs are with CW mode and one
QSO is BEFORE 1 January 1975 and one AFTER.

When I run the DXCC report (Report -> DXCC) I get this result:

MIXED 2
CW 1
80 M 2

Even when I run the DXCC report with these settings:

DXCC summary or listing
Mode = CW
Band = 80M

I still get:

MIXED 2
CW 1
80 M 2

Why do I not only get the CW DXCC awarded QSOs here?

Pictures of the report settings and result can be found at
https://dl.dropboxusercontent.com/u/2651703/dx4win-oz1lo.pdf

How do I (or OZ1LO) get a report that ONLY show the valid CW DXCCs on each
bands? Or is that not possible?


73 Joe, OZ0J


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??

[Mike Cizek W0VTT]

Hello Mike -

The certificate selection is in TQSL:
Log Operations
Sign a Log and upload it automatically to LoTW
Select File - Open
Select Station Location for Signing

Check the Callsign Certificates tab in TQSL to make sure your certificates
are properly installed.  They should each have the yellow emblem next to
them.

73,
Mike Cizek W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike
Rhodes
Sent: Wednesday, 14 December, 2016 14:02
To: dx4win@mailman.qth.net
Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ??

...finally getting around to uploading my logs from my two previous 
callsigns (WN/WA8NBO) to LOTW. Have installed the certificates, 
separated the Q's from my log and created ADIF files. However, I have 
yet to figure out how to upload using the correct certificate. If the 
process is defined in the instructions, I have overlooked it. Any help 
greatly appreciated.

Thanks,
Mike / W8DN
DX4Win Since Version 0.97

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??

[Mike Cizek W0VTT]

Hello Mike - 

No, that doesn't sound right.  It should also show WN8NBO and WA8NBO as
choices.  Did you establish station locations for both of those
certificates?  When I upload a file, after selecting the file, the Select
Station Location for Signing window shows all five of my callsigns.  You
should see all three of yours here.  There is a button on the far left of
this window that says New...  This will allow you to establish a new station
location for any of your existing callsigns, but does not allow you to add a
callsign.  

Check Callsign Certificates tab and make sure all three callsigns appear
here.  
Next, check the Station Locations tab and make sure each callsign has a
location.  You can add Station Locations on this tab.  GL.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike
Rhodes
Sent: Wednesday, 14 December, 2016 14:17
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??

Mike,
   When I do the "Sign a log" thing, it says it will sign and upload as 
W8DN with location Ohio (all 3 calls use Ohio as location). Is it going 
to give me a chance to change after that or immediately send the file. 
Seems like I would remember since I just uploaded DN Qs last night but I 
guess that is one of the "benefits" of getting to be an old fart.

Thanks,
Mike / W8DN
DX4Win Since Version 0.97




On 12/14/2016 3:08 PM, Mike Cizek W0VTT wrote:
> Hello Mike -
>
> The certificate selection is in TQSL:
> Log Operations
> Sign a Log and upload it automatically to LoTW
> Select File - Open
> Select Station Location for Signing
>
> Check the Callsign Certificates tab in TQSL to make sure your certificates
> are properly installed.  They should each have the yellow emblem next to
> them.
>
> 73,
> Mike Cizek W0VTT
>
> -Original Message-
> From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike
> Rhodes
> Sent: Wednesday, 14 December, 2016 14:02
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ??
>
> ...finally getting around to uploading my logs from my two previous
> callsigns (WN/WA8NBO) to LOTW. Have installed the certificates,
> separated the Q's from my log and created ADIF files. However, I have
> yet to figure out how to upload using the correct certificate. If the
> process is defined in the instructions, I have overlooked it. Any help
> greatly appreciated.
>
> Thanks,
> Mike / W8DN
> DX4Win Since Version 0.97
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Data Updater re-write and feature request

[Mike Cizek W0VTT]

Wasn't the original Doctor DX written for the Commodore 64? 

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Barry
Sent: Wednesday, 28 December, 2016 11:50
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Data Updater re-write and feature request

Jim,

Will it still work with my Commodore 64?

Barry W2UP

On 12/28/2016 10:17, Jim Reisert AD1C wrote:
> Based on feedback so far, I will do whatever I can to maintain
> compatibility with Windows XP.
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] up grade to new PC

[Mike Cizek W0VTT]

Hello Glenn,

The driver you need is lptdriver.exe and you put it in the dx4win drivers
sub-folder.  It should be included with the new version of the program.

You can find upgrade instructions here:
http://dx4win.ad1c.us/appnotes/upgrade.html 
The AD1C site has a LOT of useful information about the program.  GL.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Glenn
Wyant
Sent: Monday, 02 January, 2017 14:13
To: dx4win@mailman.qth.net
Subject: [Dx4win] up grade to new PC

Currently using Ver 6.05 with older XP PC

Purchased a new Win 10 PC , if I try to use my old 6.05 disk
to install on the new win10 machine, I get the message about
the Port Driver is needed or not found. My new machine has no
serial port, I will go wireless with that.

I want to upgrade from 6.05 to 8.05

My old machine should not be a problem upgrading there.
However how do I get the upgrade on the new win 10 pc when
there is no DX4WIN installed there to the port driver requirement.

The full version is $90 and the upgade is $40 , so a sizeable amount,
considering the CDN dollar sucks.

Any suggestions how I might proceed ??

Thanks , Glenn VA3DX


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX alerts - Colours

[Mike Cizek W0VTT]

Hello Luis,

Yes, it is:

Files (at the very top); Preferences; Packet 2: Colors for DX Spots.  Click
on each category to open up a window with options to change both the font
color and background color.  The ATNO would be the first category, New
Country.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Luis
Teixeira
Sent: Wednesday, 04 January, 2017 04:56
To: DX4WIN Reflector
Subject: [Dx4win] DX alerts - Colours

Hi
Is it possible to configure one colour for NEW COUNTRY ?
I know that the program already have one colour (yellow) for 'NEW COUNTRY?
but this definition includes also those we have already worked but NOT
confirmed (W).
What I mean is NEW ONE (ATNO all bands).
Is it possible?
TNX de Luis, CT4NH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Worldwide Flora Fauna

[Mike Cizek W0VTT]

Hello Ron,

You may need to edit the dx4win.awd file and add it.  It's in the save
folder.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of WB3AAL
Sent: Friday, 20 January, 2017 14:46
To: dx4win@mailman.qth.net
Subject: [Dx4win] Worldwide Flora Fauna

Hello,

 I have been working a few stations that are now operating the Worldwide FF
program since NPOTA is over.

 I worked N4CD that is in Kff-3029 in Texas. I can find the Custom Award
Worldwide FF program but I can't find his location at Kff-3029.

Thanks for any help to guide me in the correct direction!!

73
Ron Polityka
WB3AAL


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Set QSL Label Flag In Log

[Mike Cizek W0VTT]

Hello Mike,

Up at the very top -

File | Preferences | QSO

Under "Defaults for new QSO", there is a little window that allows you to
select QSL label, LoTW, and eQSL.  

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mike
Rhodes
Sent: Thursday, 09 March, 2017 12:07
To: Dx4win
Subject: [Dx4win] Set QSL Label Flag In Log

Not too thrilled with the subject to this query but couldn't figure out 
how to say it in a few words...

I know I have seen it somewhere but can't find it at the moment. How do 
I select under what conditions the QSL Label flag gets set in the log 
entry screen. Looked in the help screens but could not figure out how to 
narrow the search.

Thanks,
Mike / W8DN
DX4Win Since Version 0.97

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Data Updater: UPDATE\dx4win.php is not a JSON fileerror

[Mike Cizek W0VTT]

Jim,

You shouldn't have to apologize for ANYTHING!  We all owe you a huge debt
for all of the time and effort you put in to your utility programs and
databases.  Thank you.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Jim
Reisert AD1C
Sent: Thursday, 06 April, 2017 18:07
To: DX4WIN Reflector
Cc: iz5...@gmail.com; wa3...@arrl.net; OZ0J Joe; Joe Reisert
Subject: [Dx4win] DX4WIN Data Updater: UPDATE\dx4win.php is not a JSON
fileerror

Hi Folks,

I finally figured out what's causing this error from the DX4WIN Data
Updater.  Only a few people have reported seeing it:

UPDATE\dx4win.php is not a JSON file

It means exactly what it says it means.  Because it happened to me
today, I was able to diagnose the problem.  It's a long-ish story, but
the executive summary is:

1.  The Updater is doing exactly what it's supposed to do.
2.  If you saw this error, you will not see it again.

Leo, IZ5FSA maintains the 425 DX News calendar:

http://www.425dxn.org/index.php?op=wcal

He makes a version of this calendar available that can be used by
DX4WIN.  In the past, the calendar he provided was text-based.  It
looked something like this:

13/02/2016 00:00:00,21/02/2016 23:59:59,V31YN: Belize
13/02/2016 00:00:00,23/02/2016 23:59:59,5V7TH: Togo
13/02/2016 00:00:00,24/02/2016 23:59:59,XW4XR: Laos

After the Updater downloaded the calendar, the user had to manually
import it into DX4WIN.  I believe the name was something like
calendar.txt.

Somewhere along the line, the name of the downloaded file became
dx4win.php, but it was still in text format.  Remember this for later.

In early 2016, Leo began offering the calendar in JSON format.  It was
first used by version 8.01 of the DX4WIN Data Updater:

"JSON, or JavaScript Object Notation, is a minimal, readable
format for structuring data.
  It is used primarily to transmit data between a server and web
application, as an alternative to XML."

The calendar in JSON format was downloaded into a file called
calendar.php, which was used by the DX4WIN Data Updater to update the
calendar inside DX4WIN.  The user no longer had to import it into
DX4WIN by hand.

Recently, Leo moved the calendar from his personal web server to the
425 DX News web server.  In this process of this change, the name of
the file that the Updater downloaded changed again, this time (back)
to dx4win.php.  This also resulted in the release of version 9.4 of
the DX4WIN Data Updater.

Here is where the problem occurs.  People who used an earlier version
of the DX4WIN Data Updater downloaded a text version of the calendar
into a file named dx4win.php, which is stored in the UPDATE directory.
Today, the Updater is downloading a file with this same name, but in
JSON format, to a temporary directory.  The Updater compares the old
and new calendars to see if they are different.  It compares the
newly-downloaded calendar from the temporary directory, with the
previous one that is in the UPDATE directory.  If you were using an
old version of the updater, you may have an old dx4win.php file in
text format.  So the Updater is trying to compare the new JSON-format
calendar with the old TEXT-format calendar.  This cause the pop-up
error message.  When the error occurs, the Updater decides the old
calendar in the UPDATE directory is no good, and replaces it with the
one it just downloaded.  So the error will not occur again.

Sorry for the inconvenience.  At least I understand the problem now,
and know that it is *not* with the 425 DX News website or the Updater.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Query

[Mike Cizek W0VTT]

Hello Dean,

Are you talking about the DXCC report?  In this matrix the symbols are:
C = confirmed (but not submitted for credit, or credited by the League)
S= submitted for credit (but not yet credited)
*= confirmed, submitted, and credited to your DXCC account.

So - what you see is not unusual.  There is a handy way to align your DX4WIN
log with your ARRL DXCC account, if you have a DXCC award and an LoTW
account.  Use Jim's utility program "Compare LoTW to DX4WIN".  Info is here:
http://dx4win.ad1c.us/lotw/index.html 

GL.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean
Norris
Sent: Monday, 08 May, 2017 15:58
To: dx4win@mailman.qth.net
Cc: k...@arrl.net
Subject: [Dx4win] Query

I did  a search on DXCC listing mix/cw/ssb and see a number of entities
showing an "S" for some prefixes where there is a "C" in one or morde of the
mode positions.  Shouldn't , therefore be a "C"  in the "MIX"  column?


Just askin'
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Query

[Mike Cizek W0VTT]

Hello Mike,

You may need to do that manually.  If you make a submission through DX4WIN,
you can change all of the submitted QSOs to Checked.  Look under Reports –
Award Flags – Action.  Try this – AFTER making a backup copy of your log and
putting it safely away.  Do a submission (Reports – Report/Action –
Submission) for the award(s) of interest.  Then do Reports – Award Flags –
Action – Submitted -> Checked for the same award(s).  If that doesn’t work,
maybe someone else will have an idea, or you may need to do it manually.
GL.

73,
Mike W0VTT


From: Mike Parnin [mailto:mikep6...@yahoo.com] 
Sent: Tuesday, 09 May, 2017 12:40
To: Mike Cizek W0VTT; 'Dean Norris'; dx4win@mailman.qth.net
Cc: k...@arrl.net
Subject: [Dx4win] Query

In regards to LOTW and DX4WIN 8.05 I have what may seem as a easy reply to
this problem.
I have a LOTW account and have DXCC. I upload and download my log to LOTW
with no problem.
My numeric values in LOTW and Dx4WIN match exactly. My question is when I
download my DXCC info from LOTW, the "C" values in the DXCC Listing report
don't change from "C" Confirmed to * for Checked. Yes, I have transferred in
LOTW those Confirmed to Checked and the "numeric" values for DXCC and the
ones in DX4WIN Summary match. Why are Confirmed values in DX4WIN not
changing to * ?  Do I have a setting wrong or is this a manual setting ?


TNX,  Mike,  N4EPD


________
From: Mike Cizek W0VTT 
To: 'Dean Norris' ; dx4win@mailman.qth.net 
Cc: k...@arrl.net
Sent: Monday, May 8, 2017 5:15 PM
Subject: Re: [Dx4win] Query

Hello Dean,

Are you talking about the DXCC report?  In this matrix the symbols are:
C = confirmed (but not submitted for credit, or credited by the League)
S= submitted for credit (but not yet credited)
*= confirmed, submitted, and credited to your DXCC account.

So - what you see is not unusual.  There is a handy way to align your DX4WIN
log with your ARRL DXCC account, if you have a DXCC award and an LoTW
account.  Use Jim's utility program "Compare LoTW to DX4WIN".  Info is here:
http://dx4win.ad1c.us/lotw/index.html 

GL.

73,
Mike W0VTT

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dean
Norris
Sent: Monday, 08 May, 2017 15:58
To: dx4win@mailman.qth.net
Cc: k...@arrl.net
Subject: [Dx4win] Query

I did  a search on DXCC listing mix/cw/ssb and see a number of entities
showing an "S" for some prefixes where there is a "C" in one or morde of the
mode positions.  Shouldn't , therefore be a "C"  in the "MIX"  column?


Just askin'
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] k3

[Mike Cizek W0VTT]

Hello Steve,

Look again, it is listed.  If you have an older version of DX4WIN (I don't
know when it was added), try a generic Kenwood radio.  I'm sure there is
info on AD1C's excellent web site: http://dx4win.ad1c.us/ 

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of steve jobes via DX4WIN
Sent: Thursday, 15 June, 2017 22:33
To: dx4win@mailman.qth.net
Subject: [Dx4win] k3

Hi,
   I  just got a K3 and want to hook it up to dx4win but didn't see it
listed under radios. What is the procedure and settings? I also have the P3.
I appreciate any info given Thanks.
73,
Steve W1DXH
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] dx4win on wine

[Mike Cizek W0VTT]

Hei Arne,

I'm not a Linux expert, but have tried and was not successful running DX4WIN
on Ubuntu.  This was a few years ago, and I was not able to find anyone else
at that time who was able to make it work in any version of Linux.  GL.

3,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of oh2...@sral.fi
Sent: Tuesday, 04 July, 2017 16:03
To: dx4win@mailman.qth.net
Subject: [Dx4win] dx4win on wine

Hi,

has anybody run dx4win on wine? How to make the radio if work over a USB 
adapter?

73 Arne

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADI Import Having Duplicates Rejected

[Mike Cizek W0VTT]

Hello Bud,

You have several options when importing QSOs.  When you select a file for
import, a window opens up entitled "Options for duplicate QSOs".  It has a
drop down menu and the default option is "Issue warning and stop".The
next two options are "Imported QSO replaces existing QSO" and "Imported QSO
is ignored".  Simply select whichever one of these you like and the import
will proceed.  GL.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Tuesday, 04 July, 2017 20:13
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADI Import Having Duplicates Rejected

I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went
perfectly. The DX4WIN log shows mode JT65. Perfect.

The WSJT-X adi file now has three qso's including the first one.

DX4WIN rejected the import because of the one duplicate QSO.

How do I set DX4WIN to accept all duplicates in the adi file?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] cut numbers?

[Mike Cizek W0VTT]

Hello Peter,

Not sure what you mean here.  If you are talking about canned responses from
the CW keyboard window, yes, you can.  Simply type in 5NN, or whatever cut
number response you want to one of the function keys.

If you are talking about serious contesting, you may be better off using
N1MM or one of the contest specific logging programs.  

Did this answer your question?  If not, what exactly do you want to do with
cut numbers?

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Peter Archibald
Sent: Thursday, 27 July, 2017 18:09
To: dx4win@mailman.qth.net
Subject: [Dx4win] cut numbers?

Does anyone know,  if you can have cut cw numbers with in contest mode??

 

Or in setup.

 

Tnx  Peter/W4ZGR

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] New mode FT8

[Mike Cizek W0VTT]

Hello John,

In the QSO Window, do a filter (F8) for AMTOR. Then QSO > Multiple QSO
operations > Set Mode.  

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of W9RPM
Sent: Tuesday, 01 August, 2017 12:29
To: DX4WIN
Subject: [Dx4win] New mode FT8

Hi, I am logging all my FT8 contacts as AMTOR, as I never use that 
mode.  Will I by able to change all of them at once over to FT8 when it 
is available to chose, or will I have to change each one manually?

Thanks, John W9RPM

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
DX CLUB: http://www.tcdxa.org/
AOL IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

[Mike Cizek W0VTT]

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

[Mike Cizek W0VTT]

Hello Bob,

The program only does phone, cw, and digital because that is what the League
counts for DXCC; they don't care which digital mode you use for your digital
DXCC.  The reports generator looks at the entire log, or a selection, but
will not recognize the F8 filter.

There are two ways to get the report info you want.  One (I think the
easiest) is to use the method I described in my last email.  The other would
be to assign all of your JT65 QSOs to a group, make a selection (different
than a filter) of that group number, and do your report on the selection.

73,
Mike W0VTT

-Original Message-
From: Robert Garceau [mailto:rgarc...@snet.net] 
Sent: Friday, 11 August, 2017 16:25
To: 'Mike Cizek W0VTT'; 'N4QS, Dave Perry'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

I have version 8.02 and it does accept JT65 in the mode column of all the
q's that import from WSJT-X. And uploading to LOTW is not a problem. What I
tried to do was go to reports>report generator and do a search by mode. JT65
doesn't show, only PHONE, CW and DIG. 

Bob, W1EQ

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com] 
Sent: Friday, August 11, 2017 5:16 PM
To: 'N4QS, Dave Perry'; 'Robert Garceau'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Format for FT8 mode Input in ADIF file for TQSL?

[Mike Cizek W0VTT]

Hello Paul,

Yes, there are only three characters in FT8, so you need to change all of
those MODE:4 to MODE:3.  You won't have to fuss with this when the new
version comes out :-)

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Paul Ferguson
Sent: Monday, 14 August, 2017 17:22
To: dx4win@mailman.qth.net
Subject: [Dx4win] Format for FT8 mode Input in ADIF file for TQSL?

I used DX4WIN LOTW > Export to LOTW. Most of the QSOs in this batch 
were FT8 mode. I then edited the LOTW ADIF formatted file to indicate  
FT8 mode on all FT8 QSOs.

I noticed the file entry for a JT65 QSO mode was "JT65" so I 
tried "FT8" on FT8 QSOs.

When I use the TQSL V2.3.1 with Configuration data V11.1, it says  
"Invalid MODE (FT8)" on the first line containing the new mode.

Is it the "MODE:4" that is incorrect?

73,
Paul 
K5ESW 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] How do I modify ADIF so that I can upload FT8 QSO's?

[Mike Cizek W0VTT]

Hello Mark,

If you are logging your FT8 QSOs in WSJT-X, you can simply upload that log
with TQSL.

In my case, using a K3 and WSJT-X, DX4WIN thinks all digital mode QSOs are
RTTY QSOs and I had just been uploading them that way.  They will match as
long as both sides of the QSO use a mode in the DATA mode group.

To change your DX4WIN file to FT8, export the ADIF file and for each QSO,
change RTTY (or what ever you used to log those QSOs) to
FT8.  You can do this with a simple text editor like Notepad.

The new version of dx4win will have all of the new modes in it.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark Lunday
Sent: Monday, 14 August, 2017 20:42
To: DX4WIN Reflector
Subject: [Dx4win] How do I modify ADIF so that I can upload FT8 QSO's?

I know we don't have that update yet.  How are other folks doing the mod?

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FT8 LOTW confirmation downloads

[Mike Cizek W0VTT]

They do not show as confirmed when you download them.  You will need to look
at the lotwreport.notfound file and change each one individually.  It
doesn't take too long unless you have a ton of FT8 QSOs.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N9KO
Sent: Wednesday, 16 August, 2017 10:29
To: dx4win@mailman.qth.net
Subject: [Dx4win] FT8 LOTW confirmation downloads

I see some interesting ways to use DX4Win ,ie log FT8 as TOR and convert TOR
to FT8 in the TQSL file.  I have one question about this method.  When you
download the LOTW QSL's, how are these confirmed FT8 QSO's identified as
"confirmed" in the DX4WIN program as the LOTW download shows the mode of FT8
and DX4WIN shows the mode of TOR?

N9KO
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Digest, Vol 160, Issue 6

[Mike Cizek W0VTT]

Hello Bill,

You can decrease the Poll Rate and number of tries to get a shorter time
before the radio is turned off.  Under Preferences > Radio, try Poll rate
(ms) 500 and Max Tries 2.  That way, you only have to wait one second.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bill
Sent: Wednesday, 16 August, 2017 10:58
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Digest, Vol 160, Issue 6

I have another issue I hope is resolved in the new release. When no
radio is present or the radio is turned off while to program is
running it freezes DX4WIN until the radio times out.  Why freeze the
program while we wait for the radio to time out, just continue
normally with a warning message a bottom of window or time out much
faster.

Thanks,

Bill--K5ZQ

**

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Uploading FT8 QSO's to LOTW

[Mike Cizek W0VTT]

Hello Tom,

There is an easier way.  For FT8, log them as TOR, a mode supported by
dx4win but not by LoTW.  In TQSL, under File > Display or Modify
Preferences... > ADIF Modes > Add...   Type TOR in the ADIF Mode window,
select FT8 for the Resulting TQSL mode, and select OK.  Now, all of the FT8
QSOs that you logged as TOR will be converted to FT8 when they are signed
and uploaded to LoTW.   Unfortunately, you cannot do the same with FSK441 to
MSK144 because both modes are supported by LoTW.

OR - you can simply upload your WSJT-X adif log to LoTW through TQSL.

Note that in LoTW, ANY mode in the Data mode group will provide a match with
any other mode.  For example, if you log your FT8 QSO as TOR and upload it
as either TOR or FT8, and the other guy uploads his as RTTY or simply as the
generic DATA mode, it will generate a match.  DXCC does not care which
digital mode you use.

Rest assured that dx4win version 9 DOES include all of the new modes.  

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Tom Hammond
Sent: Wednesday, 23 August, 2017 13:20
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Uploading FT8 QSO's to LOTW

Greetings folks. Thought I'd share an experience that might help you, or,
someone might point out how to do this differently. 

 

I've made a handful of FT8 QSO's. Since DX4WIN doesn't have an FT8 mode
(YET!) I was selecting a similar mode of JT65. When the ARRL announced that
FT8 was now a supported mode on LOTW, I decided to export my FT8 QSO's and
upload to LOTW. 

 

So, in DX4WIN, I exported my QSOs creating an .adi file. I then edited this
file and changed all occurrences of JT65 to FT8. I saved the file and then
used TQSL to sign and upload my .adi file. However, TQSL said the "FT8 " was
an invalid mode. Wait, what? Maybe you already know where I went wrong. 

 

In the .adi file there are XML-like field names. My .adi file had
FT8. Well, it turns out that "4" after MODE means that the mode is
4-characters long, BECAUSE, I had originally chosen JT65 as the mode which
IS 4-characters long. Once I figured this out, I changed the field heading
to FT8 and saved the file. This time my file was signed and uploaded
with no errors. 

 

I've done similar search and replace from FSK441 to MSK144 but both of those
mode strings are 6 characters, so I didn't have to change the  field
heading. 

 

So, lesson to be learned here is, when selecting an alternative mode for
your FT8 QSO's, try to find a 3-character mode so that when you perform a
search and replace of your adi file, you also won't have to change each
occurrence of the  length character. 

 

There's got to be an easier way..

 

73, Tom

K8BKM

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN ver 8.05 Help

[Mike Cizek W0VTT]

Hello Carol,

Jim AD1C has info on the DLL error on his website here:
http://dx4win.ad1c.us/updater/index.html 

There is also info on importing your log into a newer version here:
http://dx4win.ad1c.us/appnotes/upgrade.html 

Scroll about 2/3 of the way down the page to where it says "Additional notes
for upgrading to DX4WIN 8.0x from an earlier major version"  and see if that
works.  GL.

73,
Mike W0VTT 

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Carol Richards
Sent: Wednesday, 23 August, 2017 12:40
To: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN ver 8.05 Help

Hello all,

My XP computer just died and I have Win 8.05 set up on a win 7 machine. 
Almost everything is fine except...

1. My DX4WIN ver 6.04 files were saved on a flash drive. I imported that 
file into DX4win 8.05. All the qso's came through except for one 
problem...all the qso info is gone; name, qth, etc. Everything else is 
there.


2. I have downloaded the updater but it won't run because I am missing 
VCRunTIME140.dll. I remember having that problem with my XP machine and 
someone told me how to fix that problem.


Any help?



Carol


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Sunrise /sunset window

[Mike Cizek W0VTT]

Hello Bernie,

If your notebook screen is much smaller than the screen you originally had,
it may be open but off the edge of the screen someplace.  Do you have "Leave
all windows in original position" checked?  It's under File > Preferences >
Screen.  If it is checked, try un-checking it.  Un-check the SR/SS window in
the QSO window > Windows, and check it again and see it if re-appears.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of w...@att.net
Sent: Wednesday, 23 August, 2017 16:30
To: dx4win@mailman.qth.net
Subject: [Dx4win] Sunrise /sunset window

Hi,
I just installed, I copied over the whole directory to a notebook -Windows 7
everything seems to be fine everything is there except I can't open the
sunrise sunset window I didn't see anything in the archive
Anybody have the answer ?
I don't see it behind any of the windows I've been moving them around
Thanks for any help 73, de Bernie/WO2N

Sent from my iPhone
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT9

[Mike Cizek W0VTT]

Hello Bob,

There is no provision for the user to add modes, but there are a couple of
ways to log your JT9 QSOs and upload them to LoTW.

In my setup (WSJT-X and K3) all of the soundcard modes are logged as RTTY.
I make note of the actual mode (JT9, MSK144, or JT65 on my case) in the
"Notes for this QSO" field and just upload them as RTTY QSOs.  They will
still generate a match in LoTW.

Another way is to log them as TOR, which is a mode not supported by LoTW.
To upload them you can have TQSL map them to JT9:
 TQSL > File > Display or Modify Preferences... > ADIF Modes > Add..  Type
TOR in the ADIF Mode: box and select JT9 for the Resulting TQSL mode.  Now
all of the TOR QSOs will be converted to JT9 when they are signed by TQSL
and uploaded to LoTW.  

When downloading from LoTW and importing them back in to dx4win, the only
QSOs that will match will be the ones where the other station has also
uploaded them as RTTY.  The rest will be in the lotwreport.notfound file and
you can change them manually.

DX4WIN version 9 will have all of the new modes in it.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of ROBERT GARCEAU
Sent: Monday, 28 August, 2017 08:39
To: DX4WIN Reflector
Subject: [Dx4win] JT9

 I have version 8.02.How do I add JT9 to the station setup parameter drop
down menu for modes?
Bob, W1EQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] IC-7300 - DX4WIN Interfacing issue

[Mike Cizek W0VTT]

Hello John,

 

This was on the reflector just the other day:

 

 

[Dx4win] CAT communications control file for IC-7300

 

Björn Ekelund Fri, 26 Aug 2016 10:53:33 -0700 bj...@ekelund.nu

 

Through a fair amount of sweat and pain I have now developed a .rig file for
Icom IC-7300.

Since you cannot have attachments in this mailing list, please drop me a
line if you are interested.  I will also submit it for publishing on the
official .rig file web page.

 

When you use it, please keep in mind that you must enable "CI-V USB Echo
Back" if you unlink the REMOTE and USB interfaces.

 

Björn

 

 

73,

Mike W0VTT

 

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of 5b4...@gmail.com
Sent: Wednesday, 30 August, 2017 03:35
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] IC-7300 - DX4WIN Interfacing issue

 

Hi, I have searched archives but not able to find much information regarding
this topic. All I basically want to do is be able to read and display the
radio frequency in the appropriate DX4WIN window and use the CW keyboard
facilities to transmit morse on the 7300, Simples!

I presume that this can be done with just the USB cable, have tried with the
7600 rig file and changing the hex code to 94, then re-booting but no luck.
Any ideas, thanks in advance

 

73

John G3SZG 5B4AHK

Sent from my mini iPad 

 

 

__

DX4WIN mailing list

Home: http://mailman.qth.net/mailman/listinfo/dx4win

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:DX4WIN@mailman.qth.net

 

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Is DX4WIN even supported?

[Mike Cizek W0VTT]

Hello Mark,

Not only is dx4win still supported, but a new version is now in beta
testing.  You don't say what version you are using, but for most recent
versions the best way to update any and all of the files is to use AD1C's
Data Updater:
http://dx4win.ad1c.us/updater/index.html 

You may also download the files manually:
http://dx4win.ad1c.us/  

The most recent country file was released just a few days ago:
http://www.country-files.com/category/dx4win/ 

You need to click where it says [download]:

Posted on September 21, 2017
Version entity is Japan, JA

Entities: 401
Prefixes: 4,630
Callsigns: 23,033
Managers: 75,623
Addresses: 11,182
[download]

Or, you can use Jim's Data Updater and update all of your files at the same
time.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark K3MSB
Sent: Monday, September 25, 2017 12:10
To: List DX4WIN
Subject: [Dx4win] Is DX4WIN even supported?

http://dx4win.ad1c.us/data/index.html

Click on

DX4WIN.CTY <http://www.country-files.com/dx4win/index.htm> - Country
File (Revision
History <http://www.country-files.com/dx4win/release.shtml>)

I get

http://www.country-files.com/dx4win/index.htm

"This is somewhat embarrassing, isn’t it?

It seems we can’t find what you’re looking for. Perhaps searching, or one
of the links below, can help."

Is DX4WIN even supported any longer?

I know the updated has ceased to work a long time ago, and I suspect from
the above link that any support is now long gone.

Mark K3MSB
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Window positions changing on reboot

[Mike Cizek W0VTT]

Hello Barry,

Under File > Preferences > Screen make sure you have the box "Leave all
windows in original position" checked.  You may also have to write a new INI
file.  File > Preferences > File.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Barry
Sent: Saturday, September 30, 2017 08:26
To: DX4WIN
Subject: [Dx4win] Window positions changing on reboot

Recently migrated DX4WIN 8.05 from a Win7 computer to a Win10 computer.  
Everything is good, except... the Previous QSOs and DXCC grid windows 
don't hold their previous position when I reboot.  AM I missing a 
setting somewhere to save the windows' positions?

Tnx,
Barry W2UP
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] NEW VERSION

[Mike Cizek W0VTT]

Hello Pierre,

Ye, it's true.  Paul announced that version 9 was in beta test during the
summer.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Pierre Dupuis via DX4WIN
Sent: Friday, October 06, 2017 22:04
To: 'DX4WIN'
Subject: [Dx4win] NEW VERSION

It is true that a new version is coming to replace version 8.05
this year or 2018.

Pierre  VE2MP
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] NEW VERSION

[Mike Cizek W0VTT]

Hello Jerry,

Paul has not announced too much about the new version, nor has he announced
a release date.  Some things he has announced are that version 9 will
include all of the new modes, plus a generic "DATA" mode, and integration
with AD1C's data updater.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jerry N9AW
Sent: Saturday, October 07, 2017 10:45
To: DX4WIN
Subject: Re: [Dx4win] NEW VERSION

Has a list of what will be in the new release ever been published?   Beta
testing is a long way down the road for development.  I would be interested
in knowing what we should expect as new features or changes.   I have been
a DX4WIN user from the beginning also.

73
Jerry N9AW


On Sat, Oct 7, 2017 at 6:31 AM, Mike Cizek W0VTT  wrote:

> Hello Pierre,
>
> Ye, it's true.  Paul announced that version 9 was in beta test during the
> summer.
>
> --
> 73,
> Mike Cizek WØVTT
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@
> mailman.qth.net]
> On Behalf Of Pierre Dupuis via DX4WIN
> Sent: Friday, October 06, 2017 22:04
> To: 'DX4WIN'
> Subject: [Dx4win] NEW VERSION
>
> It is true that a new version is coming to replace version 8.05
> this year or 2018.
>
> Pierre  VE2MP
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] NEW VERSION

[Mike Cizek W0VTT]

Hello Neil,

I think the idea is to make it as bulletproof and bug-free as possible
before releasing it.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: Neil Carr [mailto:g0...@blueyonder.co.uk] 
Sent: Saturday, October 07, 2017 11:42
To: 'Mike Cizek W0VTT'; 'DX4WIN'
Subject: RE: [Dx4win] NEW VERSION

Thanks for the updates Mike.
I've pretty much used DX4WIN since version 5, 17 yrs ago. I've always
upgraded as soon as the next version was available.
Hopefully Paul (and his Team) can  start to manage the expectations of the
customer with a release date  soon. I don't think there are going to be any
"game changing" features. Just bringing the product up to speed with modern
requirements (long overdue). No doubt the upgrade will also come with a fee.
I am giving it until the end of the year, then will move on, there are a lot
of products out there  vying for my business. We do need to be hearing
something soon.
PS: I am not shooting the messenger here :-)
Thanks for your replies.
73 Neil G0JHC


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike Cizek W0VTT
Sent: 07 October 2017 16:57
To: 'DX4WIN' 
Subject: Re: [Dx4win] NEW VERSION

Hello Jerry,

Paul has not announced too much about the new version, nor has he announced
a release date.  Some things he has announced are that version 9 will
include all of the new modes, plus a generic "DATA" mode, and integration
with AD1C's data updater.

--
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jerry N9AW
Sent: Saturday, October 07, 2017 10:45
To: DX4WIN
Subject: Re: [Dx4win] NEW VERSION

Has a list of what will be in the new release ever been published?   Beta
testing is a long way down the road for development.  I would be interested
in knowing what we should expect as new features or changes.   I have been
a DX4WIN user from the beginning also.

73
Jerry N9AW


On Sat, Oct 7, 2017 at 6:31 AM, Mike Cizek W0VTT  wrote:

> Hello Pierre,
>
> Ye, it's true.  Paul announced that version 9 was in beta test during 
> the summer.
>
> --
> 73,
> Mike Cizek WØVTT
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-bounces@ 
> mailman.qth.net] On Behalf Of Pierre Dupuis via DX4WIN
> Sent: Friday, October 06, 2017 22:04
> To: 'DX4WIN'
> Subject: [Dx4win] NEW VERSION
>
> It is true that a new version is coming to replace version 8.05 this 
> year or 2018.
>
> Pierre  VE2MP
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

---
This email has been checked for viruses by AVG.
http://www.avg.com


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Problem with exporting LoTW

[Mike Cizek W0VTT]

Hello Sam,

Do any of those QSOs show a LoTW upload date?  Did you maybe have a filter
in place (looking for something in the log) when you did the export?  Try
doing a filter by date for the contest weekend and select LoTW > Clear LoTW
Upload Date (whether or not an upload date is showing) and try the export
again.  I agree it doesn't make sense.  If all else fails, you can always
sign and upload the ADIF file from N1MM with TQSL.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Sam Leslie - W4PK
Sent: Thursday, October 12, 2017 12:15
To: dx4win@mailman.qth.net
Subject: [Dx4win] Problem with exporting LoTW

Hello everyone..

 

I have been having a problem with exporting to LoTW, and I am at my wit's
end trying to figure it out.  After the recent CQWW rtty test I imported my
log from n1mm+ and I was successful with over 1500 contacts being imported.
I selected the "set LoTW flag" when I did this, and indeed the LoTW flag was
set to "Y" for all these contacts.   When I then tried to export from DX4WIN
(8.5) for submission to the LoTW web site I got a message that only about
150 contacts were being exported.  I then aborted the export and clicked N
to "do you want to clear the upload flag".

 

All my contacts (1500+) still have the LoTW flag set to "Y" but now when I
try to export I get the message that "Exports finished, no QSOs were
written".

 

I then tried to set the "Filter" function by creating a new group with the
Date Filter box checked and of course the first and last dates entered.
This did not work either.  I know the answer is simple but for the life of
me I have not been able to find it.

 

What am I doing wrong?

 

Sam Leslie

w...@w4pk.com

 

Inch-by-inch life's a cinch, but yard-by-yard it is really hard

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Custom award migration to DX4WIN 9.01

[Mike Cizek W0VTT]

When migrating custom awards, I found it convenient to filter by country and
do them one at a time.  Filter (F8) for DL to do all the German DOKs, etc.
That way, the number of AWDERR messages isn't so overwhelming.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Friday, October 20, 2017 12:15
To: DX4WIN Reflector
Subject: [Dx4win] Custom award migration to DX4WIN 9.01

As Paul mentioned in his release announcement, the custom awards
database has undergone some changes.  Some awards were re-named, and
there were some changes to the custom award values.  Note that in the
QSO window, the Custom award and Custom award value fields show the
abbreviations, not the full names.  You can do a custom award report
to see the full names.

If you are tracking custom awards in DX4WIN, you should probably
perform a migration.  This will result in changes to your log, so make
sure to save the changes if you are satisfied with the migration.

QSO | Multiple QSO Operations | Check Custom Awards

You will get a prompt like the following:

Checking Custom Award for 153811 QSOs
Are you sure

Click Yes.  When it is done, you may see something like the following:

One Custom Award value could not be converted
Look for AWDERR: in the QSO notes field

These are examples of some of the error messages you see in the "Notes
for this QSO" field:

AWDERR: Awd=WLHA AwdV=0029 Msg=Bad award value2
AWDERR: Awd=ARLH AwdV=GUA 005 Msg=QSO not good for award2

The first message means the abbreviation for the custom award value
was not recognized.

The second message means that the QSO was made before the award start
date, or after the award end date.

If you find any such AWDERR messages in error, please let me know and
I'll update the database.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] new features in 901

[Mike Cizek W0VTT]

Hello Dave,

File > Preferences > Ext Data.

Check Enabled for Online callsign lookup, enter your user name and password
for QRZ.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of n...@vci.net
Sent: Friday, October 20, 2017 15:23
To: 'kostas sv1dpi'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] new features in 901

How do you set up xml data lookups from qrz.com?  I don't see it in the
documentation.  I have a subscription.

Thank you.

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of kostas sv1dpi
Sent: Friday, October 20, 2017 12:27 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] new features in 901

Paul talked about all the new features.

I would like to note some long awaited features which I liked most in 901:

-> Auto connect in clusters

-> xml data with QRZ.com plus alt+f3 opens direct the browser to qrz!

-> Separate DXCC application either via LotW either via paper cards.

-> Auto update for files and dx4win.

-> new modes and reports (for the ft8 funs - I hate this mode... :) )

-> new search! Alt+f8 and you can search for data, phone, cw

-> in QSL methods added OQRSd (direct) and OQRSb (buro)

and much more according Paul's email...

73 Kostas SV1DPI


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN Digest, Vol 162, Issue 17

[Mike Cizek W0VTT]

Hello Dick,

The license key goes in the main dx4w901 directory.  Yours should be
N7RO_lic.dx4w9

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dick Moen N7RO
Sent: Friday, October 20, 2017 15:53
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN Digest, Vol 162, Issue 17

Where do I put the licence key?

- Original Message -
From: dx4win-requ...@mailman.qth.net
To: dx4win@mailman.qth.net
Sent: Friday, October 20, 2017 9:26:50 AM
Subject: DX4WIN Digest, Vol 162, Issue 17

Send DX4WIN mailing list submissions to
dx4win@mailman.qth.net

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-requ...@mailman.qth.net

You can reach the person managing the list at
dx4win-ow...@mailman.qth.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of DX4WIN digest..."


Today's Topics:

   1. Re: DX4WIN Data Updater is not compatible with DX4WIN 9.01
  (Neil Carr)
   2. Updated country database for version 9 (Paul van der Eijk)
   3. Re: Updated country database for version 9 (PY2YP)
   4. Re: CAT problem (kostas sv1dpi)
   5. RES:  Updated country database for version 9 (py5eg)
   6. Network access Version 9 (Ernie)


--

Message: 1
Date: Fri, 20 Oct 2017 15:41:38 +0100
From: "Neil Carr" 
To: "'Jim Reisert AD1C'" ,  "'DX4WIN
Reflector'" 
Subject: Re: [Dx4win] DX4WIN Data Updater is not compatible with
DX4WIN 9.01
Message-ID: <000101d349b1$89d45770$9d7d0650$@blueyonder.co.uk>
Content-Type: text/plain;   charset="us-ascii"

Understand Jim thanks.
I'm sure it's been brought up last 24 hrs, so apologies, only get time to
read my emails between meetings/work during the week, and whenever I have
had a quick look there have been 20-30 to sift through on this reflector,
sorry if I've missed it and doubled up.
Appreciate your quick reply.
73 Neil G0JHC


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: 20 October 2017 15:34
To: DX4WIN Reflector 
Subject: [Dx4win] DX4WIN Data Updater is not compatible with DX4WIN 9.01

The DX4WIN Data Updater is for users of DX4WIN 8.05 and earlier.  It is not
needed by DX4WIN 9.01 which has a built-in updater.

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

---
This email has been checked for viruses by AVG.
http://www.avg.com



--

Message: 2
Date: Fri, 20 Oct 2017 11:29:05 -0400
From: Paul van der Eijk 
To: DX4WIN Reflector 
Subject: [Dx4win] Updated country database for version 9
Message-ID:

Content-Type: text/plain; charset="UTF-8"

Jim released a new country database.

When you do a Help | Check for updates you should see the file country.dat
available for download.

--Paul, KK4HD

-- 
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com


--

Message: 3
Date: Fri, 20 Oct 2017 14:00:09 -0200
From: PY2YP 
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Updated country database for version 9
Message-ID: <923af4e2-59e0-d6ae-7c64-fcb49f2cc...@py2yp.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Yes. It works! Still waiting for the key.

73 DX de PY2YP - Cesar

On 20/10/2017 13:29, Paul van der Eijk wrote:
> Jim released a new country database.
> 
> When you do a Help | Check for updates you should see the file country.dat
> available for download.
> 
> --Paul, KK4HD
> 


--

Message: 4
Date: Fri, 20 Oct 2017 19:10:07 +0300
From: kostas sv1dpi 
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] CAT problem
Message-ID: <8ba29792-d913-cc12-8221-4951f0600...@otenet.gr>
Content-Type: text/plain; charset=utf-8; format=flowed

I believe there are not changes in code on cat control. Only Paul can 
say if these are the same files from Jim's site or new ones, so it is 
possible to have bugs. I assume you use files from Jim's site for these 
radios. don't you? Also please confirm that you have the same settings 
in both versions for the 2 radios? Anyone else who has tried Icoms 7300 
or 7600?

73 Kostas SV1DPI

 20/10/2017 15:25, ? Tibor M. Blum - IK2SAI - 

Re: [Dx4win] win 9 leave windows in original position

[Mike Cizek W0VTT]

Hello Dick,

The window positions are stored in the config.txt.

File > Preferences > File > Write configuration file

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Richard Hicks
Sent: Friday, October 20, 2017 21:52
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] win 9 leave windows in original position

My windows change every time I reopen program especially country window.

 

Any ideas?

 

Dick K4UTE

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] v 9.01 - Custom Award question.

[Mike Cizek W0VTT]

Hello Ernie,

Click on the Custom Award Value window and type F1.  This brings up a list
of all the numbers with names.  In this window, type F2 to toggle between
sorting the list by number or by city name.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ernie Walls
Sent: Saturday, October 21, 2017 07:30
To: dx4win@mailman.qth.net
Subject: [Dx4win] v 9.01 - Custom Award question.

I will try to keep this simple - and I do hope there is a simple answer that
I have completely overlooked.

I worked Yoshi, and he lives in Sendai City (Japan).

I want to populate both the 'Custom Award' and 'Custom award value' boxes on
the logging window.

We all know how we collected this same information (data) in v8.05 and prior
- and that Sendai City is city number '4616' in (Jim's AD1C) the JCC award
database.

Let's assume, however, that I do not know this and want to find out this
very same information using v9.01.

What I did was select 'JCC' from the list contained within the 'Custom
Award' database. So 'JCC' populates the 'Custom Award' box.

I then clicked on the 'Custom award value' box, and a list of numbers comes
up - thousands of numbers. Just numbers, as far as I can see!

My question is - how do I find out which of those many numbers belongs
(equals) Sendai City. In v8.05 there was a database that allowed you to
match the name of the city with the corresponding award number - easy!

How do I do this very same thing using v9,01.

What did I miss?

Please help - it must be simple?


Ernie Walls VK3FM
vk...@wallsy.com.au<mailto:vk...@wallsy.com.au>
Mobile 0418 301 483

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Upgrade from 8.05 to 9.01 with XP Pro

[Mike Cizek W0VTT]

Hello Ron,

File > Preferences > Screen > Scale Factor

The default is 100 (%), try something bigger.  If that doesn't give you the
look you want, you may have to try changing the settings on your monitor.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ron Polityka
Sent: Saturday, October 21, 2017 10:49
To: dx4win@mailman.qth.net
Subject: [Dx4win] Upgrade from 8.05 to 9.01 with XP Pro

Hello,

 I have a dedicated machine that runs XP Pro that is not connected to the
Internet in any way. I have it connected to my K2 and K1 for CW keying but I
do pull the plug to run a straight key, bug or the keyer inside the K2 and
K1 rigs.

 I have been one of the longtime guys that uses the DX4WIN program since day
one. So I decided to do the upgrade but I first went out and purchased a new
USB Flash Drive. I backed up the entire folder for DX4WIN 8.05 version.

 I downloaded the new DX4WIN 9.01 and purchased the license. A few hours
later I received my receipt and the V9 license file.

 I loaded the file onto the computer that is on the Internet running Win 7.
I then loaded onto the XP Pro computer. I then copied my log file into the V
9.01. Everything opened up fine and seems to work great. Now for the real
test. I did an update on the V 9.01 on the Win 7 computer. I copied the
DX4WIN Version 9.01 file from the Win 7 computer to the XP Pro computer.

 I opened up my log file and everything is working fine. Now I just have to
go and transfer some files I use in the DX4WIN for CW and PSK to their
proper location.

 One thing I would like to do is make the windows larger on the XP Pro
machine but I have a larger monitor I can use but that will be at a later
time.

Thanks to Paul and the Beta Testers.

73
Ron Polityka
WB3AAL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Callsign lookups.

[Mike Cizek W0VTT]

Hello Ernie,

G4IIY is correct, use the  command, but there are a few other things
to check.

 In File > Preferences > Ext Data:
Data Source = QRZ Online
Website callsign lookup = enabled
Address = http://www.qrz.com/db/

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ernie Walls
Sent: Monday, October 23, 2017 08:57
To: dx4win@mailman.qth.net
Subject: [Dx4win] Callsign lookups.

Can some kind soul tell me how to get the QRZ.com callsign lookup feature
working.

A couple of pieces of info - this still works instantly and flawlessly in
8.05, and so easy was it to apply even I had no problem getting it working.
And.. I do not have a paid subscription to QRZ.com. I use the free service.

For the life of me I cannot get this working and either cannot find the
correct information to allow me to get it working or cannot understand the
information that I can find about the subject. And yes, I do have VERY POOR
computer skills.

Please be detailed and provide info step by step and if you think necessary
(or better) send the information directly to me.

Thanks in anticipation.

Ernie Walls VK3FM
vk...@wallsy.com.au<mailto:vk...@wallsy.com.au>
Mobile 0418 301 483

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] wwff

[Mike Cizek W0VTT]

Hello Mark,

You may need to update those award values.  In the QSO window:
QSO > Multiple QSO Operations > Check Custom Awards

Make a back up copy of your log first, just in case.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark
Sent: Tuesday, October 24, 2017 13:14
To: dx4win@mailman.qth.net
Subject: [Dx4win] wwff

Version 9.01 don't copy my wwff award, how can i fix it ?

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QRZ XML DATA

[Mike Cizek W0VTT]

Hello John,

File > Preferences > Ext Data
Data Source = QRZ Online
Online callsign lookup = Enabled
Initial Callsign and Callsign lookup address should already be filled in.
Enter your callsign and password.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Wakefield
Sent: Thursday, October 26, 2017 10:40
To: dx4win@mailman.qth.net
Subject: [Dx4win] QRZ XML DATA

Can anyone tell me please what to write in the relevant boxes to receive XML
data from QRZ?  I have looked at recent postings but cannot see an answer.
Can someone advise me please. I have a subscription on QRZ for XML.

 

Thanks,

 

 

John M0XIG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] update

[Mike Cizek W0VTT]

You will only see the files that have been updated.  It won't show you files
that are the same as the ones you already have.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of on...@telenet.be
Sent: Thursday, October 26, 2017 10:49
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] update

when i use help - update, i always see the sample logfile - tcp file etc..,
is that normal ? 
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Worked All UK Counties

[Mike Cizek W0VTT]

Hello Ernie,

It's still there:  UK Counties   Award Code WGBC

Do Reports > Custom and type UK

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ernie Walls
Sent: Thursday, October 26, 2017 23:26
To: dx4win@mailman.qth.net
Subject: [Dx4win] Worked All UK Counties

This award does not appear in 9.01 - or, I cannot find it! Has it been
deleted?

Ernie Walls VK3FM
vk...@wallsy.com.au<mailto:vk...@wallsy.com.au>
Mobile 0418 301 483

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] wwff

[Mike Cizek W0VTT]

They are both still there.  The default search in the Custom Award window is
by award name.  Start typing World Wide Fl  and it will come up.  F2
will switch between searching for award name and award code.  Hit F2 and you
can type WWFF or ARLHS.  The text at the top of the box tells you if it is
searching for the name or the award code.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark
Sent: Sunday, October 29, 2017 04:05
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] wwff

In version 8.05 I saw in my logbook, in the awdstrng column, the name of the
award. In version 9.01 I only see BAD = WWF or BAD = ARLH
What am I doing wrong ?

 

73 - ON5GM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

[Mike Cizek W0VTT]

Hello Bud,

You need to log in to QRZ first.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Sunday, October 29, 2017 17:07
To: dx4win@mailman.qth.net
Subject: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

I switched from using the Flying Horse CD Rom in V8 to using QRZ.Com in V9. 
I entered my user name and password in Preferences..

I’m now missing the street address line when using QRZ.COM with F3.

What do I need to do?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] A Minor Issue

[Mike Cizek W0VTT]

Hello John,

If you want to make and save changes to a QSO, use F10, Update QSO.  If you
are going through the log doing buro cards using the F2 key, hitting F2
after making the change will save the changes and do whatever else you have
it set to do in File > Preferences > F2 key.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of John Holmes
Sent: Thursday, November 02, 2017 14:52
To: dx4win@mailman.qth.net
Subject: [Dx4win] A Minor Issue

I am running the latest version 9.02.1134 and noticed something odd. In
going through my incoming bureau QSL cards I found one for which I had
busted the call. I found him in my logbook viewer and brought the incorrect
QSO to the screen. Then I changed the callsign to the correct one and
pressed . I would have received a "Do you want to make the changes"
warning previously but this did not happen and the callsign could not be
corrected. If I changed the QSL route, etc. and pressed , the
modified QSL route would be saved and the corrected callsign would also be
saved.
Just a minor issue.
John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Can I changing spacing?

[Mike Cizek W0VTT]

Hello Dusty,

Resize and position all the windows the way you want them, then do File >
Preferences > File > Write configuration file.  The window size and position
info is saved in the config file.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dusty Chapman
Sent: Friday, November 03, 2017 21:51
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Can I changing spacing?

Is there any way I can permanently resize some of the headers/spacing  in
the Logbook and DX spots windows?  That way, I wouldn't have to change them
every time  I have to reopen DX4WIN. 

For example,  in the Logbook, I only need one, maybe two spaces in the Conf
& LCnf columns for the "Y", and what prefix is nine characters wide,  etc.,
etc...

Thank you,

Dusty - K3WC

 



---
This email has been checked for viruses by AVG.
http://www.avg.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Maintenance release DX4WIN 902

[Mike Cizek W0VTT]

Hello Alan,

Check for Update will show you a list of ALL the files that are newer than
what you have, and lets you check which ones to update.  Jim's DX4Win Data
Updater is now an integral part of the program.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Alan Zack
Sent: Saturday, November 04, 2017 01:03
To: 'Jim Reisert AD1C'; 'Paul van der Eijk'
Cc: 'DX4WIN Reflector'
Subject: Re: [Dx4win] Maintenance release DX4WIN 902

Does the CHECK FOR UPDATE update the CTY files and all other files that the
DX4WIN DATA UPDATER did in ver 8. Or do we still use DX4WIN DATA UPDATER for
new CTY files, etc.

TU, Alan K7ACZ



-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Wednesday, November 1, 2017 1:51 PM
To: Paul van der Eijk
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Maintenance release DX4WIN 902

On Wed, Nov 1, 2017 at 2:21 PM, Paul van der Eijk wrote:

> Available for download as a fresh install or update using the "Check 
> for update" menu option.

The "Fresh Install" also has all the data file updates that I released on
October 30.  Note that you can get these through Help | Check for Update.
In other words, there is no need to do a fresh install of
9.02 *just* to get the data file updates.

Also note that you will no longer be prompted to update (download) the
Sample log, if you have deleted it.

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k7...@cox.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Missing DOK award in 9.01 is not missing at all!

[Mike Cizek W0VTT]

Hello Alan,

You need to update the custom award values.  In the QSO window, QSO >
Multiple QSOs operations > Check custom awards.  Good idea to filter for
just DL calls first.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Alan Zack
Sent: Saturday, November 04, 2017 02:07
To: 'Jim Reisert AD1C'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] Missing DOK award in 9.01 is not missing at all!

I found the DOK listing but the DOK's I saved in ver 8 did not transfer over
to ver 9.

Alan K7ACZ



-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Friday, October 20, 2017 11:56 AM
To: DX4WIN Reflector
Subject: [Dx4win] Missing DOK award in 9.01 is not missing at all!

The DOK award was renamed to match the WAEDC web site:

 
http://www.darc.de/der-club/referate/dx/diplome-des-darc-referates-dx/diplom
e/#c5239

[DLD]  Deutschland Diplom (German DOK)

You should find all your DOK there.  It has been so long since I changed
this that I forgot about it.

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Missing DOK award in 9.01 is not missing at all!

[Mike Cizek W0VTT]

Hello Alan,

If you have the DOK info just in the "Note for this QSO" field, it won't
magically appear in the custom award listing.  You would have had to put it
in the custom award in version 8.05.

Actually, version 8 had the listing by DOK numbers, too, but you had to
change it from name to number with F2 once you had the window open.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Alan Zack
Sent: Saturday, November 04, 2017 02:24
To: 'Jim Reisert AD1C'; 'DX4WIN Reflector'
Subject: Re: [Dx4win] Missing DOK award in 9.01 is not missing at all!

I have ver 8.05 on one PC and 9.0.2.1134 on another PC.
I have DOK info in my NOTES window. I have 106 DOK numbers in my NOTES in
both 8.05 and 9.02.
When I performed the run the "Check Custom Awards" function under Multiple
QSO Operation it told me CHECKING CUSTOM AWARDS FOR 106 QSO'S (correct). ARE
YOU SURE: YES. Response: No custom awards values were converted. What did I
do wrong?

I really like the new listing as it is by actual DOK numbers. In 8.05 they
were listed by name. Very hard to find the DOK number in the names listing.

Alan K7ACZ

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Friday, October 20, 2017 12:00 PM
To: DX4WIN Reflector
Subject: Re: [Dx4win] Missing DOK award in 9.01 is not missing at all!

> The DOK award was renamed to match the WAEDC web site:
>
> 
> http://www.darc.de/der-club/referate/dx/diplome-des-darc-referates-dx/
> diplome/#c5239
>
> [DLD]  Deutschland Diplom (German DOK)
>
> You should find all your DOK there.  It has been so long since I 
> changed this that I forgot about it.

I forgot to mention:

You *will* have to run the "Check Custom Awards" function under Multiple QSO
Operations in order to covert the old DOK award to the DLD award.  See the
message I sent out earlier today to the reflector:

http://mailman.qth.net/pipermail/dx4win/2017-October/023022.html

73 - Jim AD1C

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 901 update

[Mike Cizek W0VTT]

No, it really is 9.0.2.  Look at Help > About... on the menu bar and you
will see.  Paul will likely correct this with the next update.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Akira Iizuka
Sent: Saturday, November 04, 2017 04:45
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] 901 update

Hi folks,
Yes. Me, too.

73  Aki   JA1EOD

On 2017/11/04 17:19, Ken Chandler wrote:
> Hi guys
> First time I've used CHECK FOR UPDATES.
> Did all the fresh updates without issue, but, I'm still showing v9.01 on
the header!
> So do I need to reinstall as a complete reload!
>
> Cheers
>
> Ken.. G0ORH
>
> Sent from my iPad
>
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to ja1...@sky.sannet.ne.jp
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QSL MANAGERS

[Mike Cizek W0VTT]

Hello Mark,

You're not doing anything wrong.  Paul hasn't enabled those managers, yet.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark
Sent: Saturday, November 04, 2017 03:23
To: dx4win@mailman.qth.net
Subject: [Dx4win] QSL MANAGERS

When I want to open the database qsl manager, it says the qsl manager editor
is not available, as well as for countries and iota. What am I doing wrong ?

 

ON5GM - Mark

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ver 9.02

[Mike Cizek W0VTT]

Hello Glenn,

60m is easy:

File > Awards > DXCC  Enable 60m as a valid band and award band.

Not sure about an easy way to do FT8, sorry.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Glenn Wyant
Sent: Saturday, November 04, 2017 15:50
To: dx4win@mailman.qth.net
Subject: [Dx4win] ver 9.02

Two things I would like...

Add the 60 meter band to a spot where I can get a total countries
I have worked ( I know it doesn't count for DXCC )

Also is there any way to a get a total countries worked or list just on FT8 
???

Glenn VA3DX 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] 9.0.2 Data entry window

[Mike Cizek W0VTT]

Hello Bob,

Try playing with the Font sizes or Scale Factor in File > Preferences >
Screen and see if that gives you the look you want.  On my screen, changing
the Scale Factor from 90 to 100 makes that change.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bob Henderson
Sent: Sunday, November 05, 2017 11:58
To: dx4win@mailman.qth.net
Subject: [Dx4win] 9.0.2 Data entry window

Having just installed 9.0.2 I note the data entry window has adopted a new
format with its top line menu now on two lines rather than one and header
text smaller.  It feels uncomfortable viewing the window in this shrunken
format but it doesn't appear to be resize-able.  Is there a simple solution
I have failed to find?

Bob, 5B4AGN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] "Check for Updates" and cluster restart

[Mike Cizek W0VTT]

Hello Chris,

Go to File > Preferences > Packet2 and make sure you have Cluster node auto
connect enabled, your callsign and a Node address entered.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Chris Sauvageot
Sent: Tuesday, November 07, 2017 03:15
To: dx4win@mailman.qth.net
Subject: [Dx4win] "Check for Updates" and cluster restart

After "Check for Updates" function dx4win close and do a restart - but 
cluster starts not automatically again ( like at normal dx4win start)

73 Chris
DL5NAM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Master call data merging.

[Mike Cizek W0VTT]

Hello Vic,

The file is called mstrcals.dat and should be in the dx4w901\save directory.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Victor Kravchenko
Sent: Wednesday, November 08, 2017 13:28
To: dx4win@mailman.qth.net
Subject: [Dx4win] Master call data merging.

Please refer to Dx4win user manual 3.8 "Master calls" (page 101).

I followed a procedure step by step, but cannot locate a newly created file
(calls.txt) 
during step 4.
Is it possible that .txt file is not recognised as a valid one?


73!
Vic R6AF

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Master call data merging. Part II

[Mike Cizek W0VTT]

Hello Vic -

I just tried this myself and see what you mean.  Try changing the file name
to calls.dta.  That seemed to work for me.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Victor Kravchenko
Sent: Wednesday, November 08, 2017 13:28
To: dx4win@mailman.qth.net
Subject: [Dx4win] Master call data merging.

Please refer to Dx4win user manual 3.8 "Master calls" (page 101).

I followed a procedure step by step, but cannot locate a newly created file
(calls.txt) 
during step 4.
Is it possible that .txt file is not recognised as a valid one?


73!
Vic R6AF

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] PzRotatorAx not working in 9.02

[Mike Cizek W0VTT]

Hello Steve,

I don't use rotor control myself, but believe I read on here recently that
you need to enable it by band.  Look in File > Preferences > Control.

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Steve Lund
Sent: Friday, November 10, 2017 15:55
To: DX4WIN
Subject: [Dx4win] PzRotatorAx not working in 9.02

Has anyone gotten PzRotatorAz (13.17) to work with DX4WIN 9.02?

In checking the preferences:

8.05
Message Based
Handshake: ThunderRT6FormDC|DX4PST

9.02
Message Based
Handshake: ThunderForm|ARSWIN

Changing this to DX4PST does not change the results.

PzRotatorAz is working correctly in tracking mode with WriteLog 12.09F.

Steve, K6UM
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Sunset/Sunrise Window

[Mike Cizek W0VTT]

It used to be in Files > Preferences > Screen, but it isn't there any more!

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: Sunday, November 12, 2017 20:23
To: John Shea
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Sunset/Sunrise Window

On Sun, Nov 12, 2017 at 6:26 PM, John Shea wrote:

> The Sunset/Sunrise Window is checked and cannot be unchecked. The window
is
> not present on the screen or minimized. Closing DX4WIN9.02 and rebooting
the
> system and re-opening the program finds Sunset/Sunrise again checked and
> again the window is not present.

File | Preferences

There should be a setting to leave all windows in original position,
but I can't find it now!

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] F8 Lookup Specific QSO by Callsign

[Mike Cizek W0VTT]

Hello Bud,

Press F8 FIRST, then the callsign, then .

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Monday, November 13, 2017 09:54
To: dx4win@mailman.qth.net
Subject: [Dx4win] F8 Lookup Specific QSO by Callsign

In prior versions I always entered a callsign and pressed F8 to see logged
QSO’s with a specific station.

Now I get “not in the log”. Yet I find the callsign by scrolling the log and
finding the QSO’s I’m looking for.

What changed or what am I now doing wrong? 

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Mode RTTYM

[Mike Cizek W0VTT]

Hello Steve,

That's because your K3 is in the Data mode, and all it reports to dx4win, or
to any other logging program, is that it's in Data.  There is no way for the
logging program to tell which sound card mode you are using.

On the menu bar at the top, click on Radio > Ignore Mode in real time and
that will let you select whichever mode you are using.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Steve Lund
Sent: Tuesday, November 14, 2017 17:22
To: Mel SM0MPV
Cc: dx4win
Subject: Re: [Dx4win] Mode RTTYM

When I click on the Mode box, RTTY is the 4 selection. The first 5
selections are not in alphabetical order.

Using AFSK A on my K3 in Real-time selects RTTY.

It appears that one can not change a real-time mode selection. WHY?

When I operate the WSJT-X modes in real-time, they all show RTTY. It would
be nice to be able to override this.

Steve, K6UM

On Mon, Nov 13, 2017 at 11:50 PM, Mel SM0MPV  wrote:

> Hello,
>
> Suddenly has RTTY changed to RTTYM in the list of modes.
> All my old rtty contacts are listed as RTTY, however when adding a new
QSO,
> or since I work  AFSK I change the mode after the QSO to RTTY instead of
> SSB, the only RTTY mode in my list is RTTYM. RTTYM is exported to the adif
> file for uploadng to various databases.
>
> Is this as it should be? I am using DX4WIN 9.02 and a lenovo ThinkPad
X230.
>
> --
> 73 de Mel - SM0MPV
> 8S0C - Contest Call
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to k6um.el...@gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] qsl managers

[Mike Cizek W0VTT]

Hello Mark,

Paul has not yet enabled the database managers.

-- 
73,
Mike Cizek WØVTT
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mark
Sent: Wednesday, November 15, 2017 02:06
To: dx4win@mailman.qth.net
Subject: [Dx4win] qsl managers

Where and how can i change the qsl managers ?

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html