Every time I change modes from CW to RTTY or RTTY to CW I get the Split
N/A error message. I do not get this message when changing modes from
CW to SSB or SSB to CW. Since I am primarily a DXer who works split
having to change from split operation before mode change and then change
back to
I agree. There are only two valid reasons for a transceiver refusing to
obey a direct operator command: to avoid physical damage, or to avoid
transmitting illegally out-of-band.
So when the operator presses the SPLIT button, the transceiver should do
as it's told! Every other make of transceiver
Why only tune the radio, and not use the Waterfall?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for
Hi all.
I strongly disagree with the words that say DATA, thus AFSK - whistle
tones , is the better RTTY contest modes. There are, from my point of
several points against this theory.
Nor AFSK is the best non contest mode for RTTY. It's just for casual
operations, often with radio that doesn't
With AFSK-A the K3 has very a narrow DSP filter to maintain a really
good transmit IMD so you need to keep the modulating frequencies
within the chosen preset filter range 1275 in my setup. You can use
the waterfall to tune but you need to use DATA-A instead of AFSK-A
risk is any off
Thanks to Wayne for clearing up what was my misunderstanding regarding the
PX3 noise blanker. I now see what the problem is. It was in my
interpretation of what I expected to see when I went to the NB en menu
parameter. The next line says Turn noise blanker on/off. Since I saw no
change here,
risk is any off frequency noise from the sound card, harmonics etc
will also get transmitted not really a big issue if the sound card is
good quality.
Not quite accurate ... one can have a professional quality sound card
and if the levels are too high, the connections are not correct, the
Does anyone know of any issues with connecting the KX3 to the Ameritron AL-80B
amplifier using ACC2 port?Tnx 73, Dennis - WU6X
__
Elecraft mailing list
Home:
Attention CW Bug users. Just a short reminder if you're experiencing
scratchy dot problems due to contact bounce on your bug, I've
resurrected Ted McElroy's mechanical Dot Stabilizer which, when
installed and properly adjusted, helps eliminate around 90 percent of
this problem. Doesn't wear
Frank,
Like yourself, I do quite a bit of DX RTTY operation using split, and to
tell you the truth, I just tried what you are talking about, and you are
right! To me honest with you, I hadn't noticed it before because I have a
nasty habit of double pushing the SPLIT button before holding it to
We used two K3s for a M/2 in last weeks's contest, and did over 2000 Q's; I
second the N1MM / FSK recommendation, as there are few variables to manage if I
don't have to worry about TX levels.
Also, it's definitely an opinion, but on the receive side, I personally dislike
seeing other ops
Hi,
when working with the DS response string, i found an easier and faster
method to read the values from the equalizer.
If you select an AF-band in the RX/TX EQ menu, the set value appears briefly
in the VFO-B display area.
This value can be read out with the DB command then.
The SWTxx;
I am new to the K3, but started RTTY many years ago.
My preference has always been for FSK keying whenever possible.
I have used Writelog for many years and have found MMTTY to be
preferable to RTTYrite which is the included default.
I also like MMTTY and I also like FSK keying :)
I am awaiting
Joe you are correct that if there are physical problems and poor
adjustments it will be bad but I was assuming a good working setup
with a quality sound card that is properly adjusted at both the
computer and K3 that it will be fine.
I hope that they add the ability to monitor
Hi All,
I am having trouble with keying my AL-82 with my KX-3 thru my N0XAS UKA-2
keying adapter. The setup has worked for over a year and all of a sudden the
KX-3 shows a center to ground on the ACC2 phono all the time.
I checked the ACC2 settings and I can’t get it out of this grounded
Gents,
I will look at the Fred Cady KX3 manual, but are those AFSK TX filters or
similar filter, applied to the RTTY TX when using HRD, fldigi, N1MM, or for
that matter the KX3 Companion or others by selecting the AFSK mode on the
KX3?
Rob
KA5QQA
Hi John,
This will be fixed in the next revision of PX3 firmware.
Kind regards,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-noise-blanker-tp7593545p7593556.html
Sent from the Elecraft mailing list archive at Nabble.com.
And I do not have any issue with the K3 not going split with RTTY on
one freq and CW/SSB on the other. You have to admit operating RTTY
and SSB/CW split is not exactly a common mode.
However, it would be appropriate when initiating SPLIT from the A-B
button that VFO B mode be forced to that
On 2014-10-02 12:03 PM, dm...@nexicom.net wrote:
Joe you are correct that if there are physical problems and poor
adjustments it will be bad but I was assuming a good working setup
with a quality sound card that is properly adjusted at both the
computer and K3 that it will be fine.
I must say, push-push-hold is a reflex for me whenever working
split, SSB/RTTY/CW. My only problem is pressing the wrong button
-- V-M instead of A-B. HIHI It overwrites one of the memories.
This error comes from having my computer and P3SVGA screens at
right angles to the K3. Sometimes i'm
Hello List members,
I have for sale a factory built P3 High Performance Panadapter with factory
installed P3SVGA option, all in mint condition. The serial number is #3153 and
was purchased at the Visalia DX convention this year. I no longer have the
original packing box. It is excess to my
Excuse me while I learn what questions to ask,
Wondering if there is a logging and more program that will allow use of
CW and the PSK D and FSK D modes of my KX3 in a more complete application
than the KX3 utility terminal?
Secondly...how do you tune in stations using PSK D and FSK D? I find it
Cool idea Wolfgang, it works well for the KX3 too. Thanks.
Gary Mitchelson
NC3Z Davidsonville, MD FM18
NC3Z/4 Pamlico County, NC FM15
http://www.mitchelson.org/
On 10/2/2014 11:44, dl2ki wrote:
Hi,
when working with the DS response string, i found an easier and faster
method to read the
I would like to be able to use my K3 with NaP3 through an LP-PAN, but
when I click on a signal, instead of going where clicked it sends the
VFO to a frequency approximately 2 KHz lower. I presume it may be going
to the suppressed carrier frequency instead of the Mark frequency. Both
NaP3 and
I want to Echo Rob's question and wonder if it is possible to implement some
basic autotune algorithm similar to pressing SPOT button in the following
situation:
When I call CQ in PSK D and someone comes back to my call slightly off
frequency, I have to enable RIT and try to manually tune to a
Pete,
PowerSDR had offset values for DIG_L and DIG_U. They represented the
MARK frequency (2125 for DIG_L and 2295 for DIG_U). Are those set
correctly in your installation?
Unlike most rigs - except for Yaesu - which do not allow the dial to
show the true RTTY (RF MARK) frequency in AFSK,
Thanks for all the inquiries. The P3/SVGA has been sold.
Todd, WA7U
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Hi Igor,
If RIT is turned on, then Autospot (CW and PSK31) is already applied to the RIT
offset, not directly to VFO A. I believe this is what you're asking for?
There is no Autospot for RTTY (FSK-D) at this time. However, if CWT is turned
on, then it's pretty easy to tune in an RTTY signal by
Peter,
I suggest that you probably don't want to go that route. What I
would suggest is that you use some digital mode software behind the K3,
something like FLDIGI, or your favorite application. You will see the
stream of data on its waterfall and you would use that for final tuning.
It
Finally got around to installing this in my K3.
There seems to be a large difference in output power vs input power when
transitioning across the 146.000 threshold.
Below 146, 0.5mW drive gives 6 out. Above 146 it only gives 2 out. And swr does
not change. Ideas?
Harlan
NC3C
Sent from my
Just finished the PX3 (kit) and it works like a charm. Now comes the question.
I had a Pigknob attached to the “Acc 1” port. Now the Acc1 port is connected
between the KX3 PX3.
Can I “Y” the connection into the PX3, (From KX3 Pigknob), or some other way.
If I had to chose, of course it’s
Hi Sid,
You can daisy chain them, similar to the KXPA100. Connect the knob to the
PX3 ACC1 PC port. Then the PX3 ACC1 XCVR port to the KX3 ACC1 port.
73,
Nick
N3WG
On Oct 2, 2014 6:09 PM, Sid Leben s...@leben.com wrote:
Just finished the PX3 (kit) and it works like a charm. Now comes the
H
Yes that will work too as long as you run it stand alone. Injecting that
command set during polling in a multithreaded app, needs careful checking to
ensure that the right response occurs. Timing is a issue here.
73's Tom
On Oct 2, 2014 11:44 AM, dl2ki dl...@online.de wrote:
Hi,
when
33 matches
Mail list logo
