Wayne,
Is that same algorithm and code in the KX3 and K3s??
73,
Barry
K3NDM
-- Original Message --
From: "Wayne Burdick"
To: "Dr. William J. Schmidt"
Cc: "Elecraft Reflector"
Sent: 4/7/2019 12:32:03 PM
Subject: Re: [Elecraft] BIZARRE OFFERING FROM
nizing that
for certain functions, Windows OS is necessary.
“Aging Obsolescence” is a continuing challenge with electronics that continues
to function but no longer meets current technical ‘expectations.’
FWIW,
Barry Baines, WD4ASW
Keller, TX
Ted,
If the RX EQ isn't enough, and you're interested in a relatively simple
homebrew project, I recall an article in
QST by Hal, N4GG, about 15 years ago, for an outboard equalizer for use with
headphones.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
Merv,
I didn't mean using the P3 for I data. I would prefer having it
available from the K3S/K4. That would really cut down on the extra
stuff.
73,
Barry
K3NDM
-- Original Message --
From: "K9FD"
To: elecraft@mailman.qth.net
Sent: 3/24/2019 10:37:40 PM
Subject: Re:
I'm easy. All I want is the I stream available on the back of the
radio as it is on the KX3 while keeping the IF output. That opens up a
number of options that I now use work arounds for.
73,
Barry
K3NDM
-- Original Message --
From: "Dauer, Edward"
To: "elecraft@
He will also need com0com, a free port replicator that runs really well
with Win4K3. I have a half dozen virtual ports defined and have run with
as many as 4 at a time with no noticeable issues.
73,
Barry
K3NDM
-- Original Message --
From: "Mark Musick"
To: "roc
I've run out of ideas at the moment.
73,
Barry
K3NDM
-- Original Message --
From: "Peter Dougherty"
To: "Barry" ; Elecraft@mailman.qth.net
Sent: 3/20/2019 10:18:37 PM
Subject: RE: Re[6]: [Elecraft] Sending AFSK RTTY
VOX is engaged, the correct codec is select
will turn your radio to transmit. So, if you were planning to
use the CAT function for PTT, this will allow you to transmit regardless
of a correct set up for the PTT, or not.
73,
Barry
K3NDM
-- Original Message --
From: "Peter Dougherty"
To: "Barry" ; Elecraft@mailma
for contesting. FT8 is OK for DX, but when I get serious,
less often these days, I use CW. My station is modest compared to many,
just a K3s and some wire in the backyard; no amp, tower, rhombics, etc.
I do have DXCC mixed, phone, CW, and am short 23 for digital and 21 on
80 for 5BDXCC.
73,
Barry
K3NDM
be
more straight forward.
If you want, I can talk you through it via LL phone. It really
shouldn't take more than about 30-45 minutes to make it all play.
Contact me directly and I'll give you my phone number. But, I don't
function before about noon EDT.
73,
Barry
K3NDM
-- Original
using WSJT-X.
All you need to do is set op mode in FLDIGI and go. Have fun!
73,
Barry
K3NDM
.
-- Original Message --
From: "Peter Dougherty"
To: Elecraft@mailman.qth.net
Sent: 3/19/2019 8:59:17 PM
Subject: [Elecraft] Sending AFSK RTTY
I haven't sent AFSK RTTY in almost 18 ye
thought. You will get a steady tone if you push the tune button
on the software, yet the signal you want with transmit enabled will not
be steady.
73,
Barry
K3NDM
-- Original Message --
From: "JAY"
To: Elecraft@mailman.qth.net
Sent: 3/17/2019 2:10:03 PM
Subject: [Elecraft] D
to the splitter. If you don't split the IF out, the RSP2 works
fine.
73,
Barry
K3NDM
-- Original Message --
From: "Bob Conder via Elecraft"
To: "elecraft@mailman.qth.net"
Sent: 3/17/2019 9:26:05 AM
Subject: [Elecraft] Win4K3Suite ?
Are any of you using the Win4K
work well this way. This is what I do and have had no problems.
73,
Barry
K3NDM
-- Original Message --
From: "JAY"
To: Elecraft@mailman.qth.net
Sent: 3/12/2019 11:23:52 AM
Subject: [Elecraft] Settings for Digital use
I have the KI03BU installed.No problem RX but unable to
Mitch:
> On Feb 28, 2019, at 5:50 PM, Mitch Wolfson DJ0QN / K7DX wrote:
>
> Barry,
>
> Understand your standpoint now, but that is the opposite of what you wrote
> below. You said that you wanted to be able to run the KAT-500 utility
> remotely, which prompted me
.
It is a tough little cookie !
Barry VK2BJ
Sent from my iPad
> On 1 Mar 2019, at 06:12, Bob McGraw K4TAX wrote:
>
> Yes, improperly or incorrectly using ALC with any amp or any transceiver, for
> that matter, can and usually does produce distortion and splatter. Just
&g
Mitch:
> On Feb 28, 2019, at 11:27 AM, Mitch Wolfson DJ0QN / K7DX wrote:
>
> Barry,
>
> I have been using serial to ethernet servers for over 10 years to control
> rotors, amplifiers and other serial devices. You set these up once and can
> forget about them. You ins
ing
and other items needed at the other QTH.
FWIW,
Barry Baines, WD4ASW
(Keller, TX)
> 73,
> Fred
> AE4ED
>
> On Thu, Feb 28, 2019 at 8:12 AM Jorge Diez - CX6VM
> wrote:
>
>> Hello
>>
>> any idea if will be a new control radio for remote? Like K3/
and if there are any hints/tips I should know about.
In answer to the unasked question, why have I bought an old Orion II.
Because I have ! I like playing with different rigs although the K3 and
TS990 are the two definite keepers.
I await any responses with interest.
Barry Simpson VK2BJ
this weekend.
73,
Barry
K3NDM
-- Original Message --
From: "Ed G"
To: "elecraft@mailman.qth.net"
Sent: 2/23/2019 8:36:30 AM
Subject: [Elecraft] K3 and DATA Mode Transmit Question
My K3 seems to be all set up for RTTY – DATA Mode, AFSK A selected, I am using
Line
Mike,
One of my ham friends has his next door neighbor using solar power. It
is causing a lot of RFI across most of HF. I suggest that you require your
supplier supplier to use RF quiet solutions.
73,
Barry
K3NDM
On Wed, Feb 13, 2019, 12:58 PM mjpilgrim I've employed a small solar power
m overseas, avoid them.
Barry W2UP
Michael Walker wrote
> What has worked for me is make sure that Elecraft tags it as:
>
> "Amateur Radio being returned from Warranty Repairs".
>
> The tricky part is if they insure it for full value. CRA sometimes sees
> that as a valu
terig.com/wp/?page_id=1010
<http://www.remoterig.com/wp/?page_id=1010> . I also use one of these to
remotely control my Green Heron RT-21 rotator.
Ham Radio Outlet is a supplier for these devices.
Hope this helps,
Barry Baines, WD4ASW
(Currently
swapping over your
antenna/dummy load to the ANT 2 socket to see what happens.
I think I eventually just retuned the ATU on ANT 2 with a dummy load in
place and the problem went away.
Good luck.
Barry VK2BJ
On Mon, 21 Jan 2019 at 04:17, Ed G wrote:
> Hello,
> My K3 is exhibiting some SWR
Hi Andy,
In Win10 it's a two step procedure to get to "playback devices". First
right click on the speaker icon and select "Open sound settings".
Then click on "Sound Control Panel" on the right side of t
H, Bob,
I haven't looked to see how much difference there is between the two
settings; I don't use VOX for SSB. I guess I probably should have a
look, though. I hadn't thought of this issue because of the way I
operate. Good catch.
73,
Barry
K3NDM
-- Original Message
this a try and see how well it works. And BTW: I do
use FT8 fairly regularly as well as RTTY and PSK31.
73,
Barry
K3NDM
-- Original Message --
From: "Bob McGraw K4TAX"
To: elecraft@mailman.qth.net
Sent: 1/19/2019 9:36:26 AM
Subject: Re: [Elecraft] K3s can only transmit wsjt if the
of the day, I decided that the SPE was not for me and I sold it.
I much prefer the KPA500.
If you don't want the KPA1500 there is a very nice looking solid state amp
made in the UK by Linear Amp, the Gemini HF 1K. It has some really good
reviews on eHam and it appears to have silent QSK.
73
Barry
it go dead and not replacing it?
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
like your paper and have it. I also wish that you continue to
get more hams to actually build more things.
73,
Barry
K3NDM
-- Original Message --
From: "Jim Brown"
To: elecraft@mailman.qth.net
Sent: 1/14/2019 2:21:30 PM
Subject: Re: [Elecraft] Slightly Unbalanced dipole?
recommend the approach
above for overall simplicity and assurance of maintaining feed balance.
73,
Barry
K3NDM
-- Original Message --
From: "Vic Rosenthal"
To: "Al Lorona"
Cc: elecraft@mailman.qth.net
Sent: 1/14/2019 1:12:37 AM
Subject: Re: [Elecraft] Slightly Unba
of balanced feeders quite difficult.
An 80 meter dipole used on 40 or 20, for example, is a pretty good
antenna. However, it begs to be fed with open wire or equal. That means
no balun can be used at the antenna feed point. The exception is to use
very expensive coax. :-)
73,
Barry
K3NDM
See the note I just sent you. You may have not turned on I output.
That is my suspicion.
73,
Barry
K3NDM
-- Original Message --
From: "Kevin F."
To: elecraft@mailman.qth.net
Sent: 1/5/2019 11:42:36 PM
Subject: Re: [Elecraft] KX3 RX I/Q testing
Thanks for the prompt repl
. There will
not be anything magic to hear.
FLDIG wants the receiver's filtered audio to drive it. It develops
what it needs from a mono audio input, either line or mic in.
73,
Barry
K3NDM
-- Original Message --
From: "Kevin F."
To: elecraft@mailman.qth.net
Sent: 1/5/2019 10:35:09
Try The RF Connection. Just tell Joel you want Amphenol connectors. He
will make your cables to order for a reasonable price.
73,
Barry
K3NDM
-- Original Message --
From: "Buck"
To: elecraft@mailman.qth.net
Sent: 1/3/2019 2:53:15 PM
Subject: Re: [Elecraft] K3 Standard inte
I find it mind boggling that you guys like email for this and find it hard to
search a message board. Have you ever tried a well-set up vBulletin board?
It's S much easier. But I'm terribly outvoted here, so this is my last
email on this subject.
Barry LU/W2UP
--
Sent from: http
emails for those of us who
don't own every Elecraft product.
Barry, temporarily LU/W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
. I did own a Johnson Viking II in my early days.
73,
Barry
K3NDM
-- Original Message --
From: "Victor Rosenthal 4X6GP"
To: "Elecraft Reflector"
Sent: 12/22/2018 12:03:05 AM
Subject: [Elecraft] Tuners and spurious responses
I just replaced my single-ended T-netw
Good to hear!
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Life was miserable on 80 Friday night and part of Sunday here. It was so
bad 80 wasn't much fun. 40 and 20 were better, but still noisy.
73,
Barry
K3NDM
-- Original Message --
From: "Robert G Strickland"
To: "Elecraft"
Sent: 11/26/2018 6:33:50 PM
Subject: [Elecraf
ting
desk and computer.
73,
Barry
K3NDM
-- Original Message --
From: "Dave Scarfe"
To: "Barry LaZar"
Cc: "Bill Weaver" ; Elecraft@mailman.qth.net
Sent: 11/22/2018 8:54:00 AM
Subject: Re: [Elecraft] P3 v. SDRPlay RSP1A for panadapter
I don't have P3, b
run about 50 KHz on my 24" monitor. This way
I can see where the DX station is hearing. The way you operate will
dictate what bandwidth you will use and when.
73,
Barry
K3NDM
-- Original Message --
From: "Bill Weaver"
To: "elecraft"
Sent: 11/21/2018 1:17:12
that will
work fine if you need to buy a card.
73,
Barry
K3NDM
-- Original Message --
From: "Kev Schache"
To: Elecraft@mailman.qth.net
Sent: 11/1/2018 7:02:13 AM
Subject: [Elecraft] KX3 -Win4K3 Suite - external Soundcard
Greetings from South Australia to all,
I'm an octoge
either a SDRPlay or a LP Pan to baseband the IF and
develop the I analog data needed. Wayne essentially designed that in
the KX3.
73,
Barry
K3NDM
-- Original Message --
From: "Dave Scarfe"
To: barrylaz...@gmail.com
Cc: elecraft@mailman.qth.net
Sent: 10/30/2018 9:51:42 AM
S
station, less
than $100 to protect a few $1000.
73,
Barry
K3NDM
-- Original Message --
From: "Wayne Burdick"
To: "Elecraft Reflector"
Cc: "k...@yahoogroups.com"
Sent: 10/29/2018 11:08:39 PM
Subject: [Elecraft] Avoiding costly lightning damage to your radio
monitors this
reflector.
73,
Barry
K3NDM
-- Original Message --
From: "Terry"
To: elecraft@mailman.qth.net
Sent: 10/30/2018 1:07:06 AM
Subject: [Elecraft] K3 Win4k3Suite Question
I am looking to purchase a preowned K3. I currently own a KX3 that I
have
interfaced to W
Looks pretty good for what I've seen so far.
73,
Barry
K3NDM
-- Original Message --
From: "rich hurd WC3T"
To: "Eric Swartz - WA6HHQ, Elecraft"
Cc: "Elecraft Reflector Reflector"
Sent: 10/18/2018 9:23:05 PM
Subject: Re: [Elecraft] NEW Elecraft Webp
something heavy on top of it.
Currently going through the insurance claim process, and the number of
repetitive phone calls and emails has been mind-boggling. A very poorly
managed company.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
Wayne,
Thanks. You are doing what I've advocated for a long time, don't get
fancy just put up some wire and it will work. I hope new hams take note
of what you are doing. :-)
73,
Barry
K3NDM
-- Original Message --
From: "Fred Jensen"
To: elecraft@mailman.qth.net
Sent:
Wayne,
Nice going! What were you using for an antenna?
73,
Barry
K3NDM
On September 20, 2018 11:07:01 PM EDT, Wayne Burdick wrote:
>Tonight I heard a very weak CW CQ on 7.007 MHz right around sundown --
>LA1MFA (Norway). With the filtering on the K3S dialed down to 100 Hz,
>30
is it something else that is in play?
I’m also wondering (perhaps Dick can answer this) at what point(s) the KPA500
“soft” and “hard” faults kick-in on VSWR. If you’re running at 3.0:1 VSWR with
no issues, what are the set points for fault detection?
73,
Barry, WD4ASW
>
> Mike - K9JRI
>
>
The KAT500 manual (page 21) also notes, “The Elecraft KPA500 amplifier also
works efficiently into a load SWR of 1.5:1. Suggested values are 1.8:1 to
launch an automatic tuning operation and 1.2:1 for bypass.”
Hope this helps,
Barry Baines, WD4ASW
(Currently in Boston, MA)
>
> T
t if you have true “broadband” at both locations, I wouldn’t
expect any problems.
FWIW,
Barry Baines, WD4ASW
(Currently in Boston, MA)
> tnx and 73
> David G3UNA
>
> __
> Elecraft mailing list
> Home: htt
. They don't block voices to any significant degree. And
they're very comfortable. I find them to be a great compromise between
performance and price, compared to Bose.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I'm waiting for the movie. Jason Alexander as Eric and Jeremy Piven as Wayne
:-)
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
est K3/0-Mini was purchased in August
2014. I’m wondering how critical the updates are to the “K3/0” devices. From
what I can tell, the K3/K3S firmware revision documentation doesn’t
differentiate between features that impact the K3/K3S versus what impacts the
“K3/0” devices.
73,
Barry, WD4ASW
&g
are package is used for both the
“Remote” and “Control” devices. Perhaps Wayne, N6KR or Don, W3FPR can clarify
this for us.
73,
Barry Baines, WD4ASW
> On Jul 26, 2018, at 11:27 AM, Hisashi T Fujinaka wrote:
>
> Did you hear anything? I'm wondering the same thing.
>
> On M
rt of the various applications that utilize
these devices to get everything going again.
73,
Barry, WD4ASW
> __
> Clay Autery, KY5G
> (318) 518-1389
>
__
Elecraft mailing list
Home: http://mailman.qt
. In my mind, the ‘perfect remote setup’ would
be a blending of the two systems… ;-)
FWIW,
Barry, WD4ASW
Keller, TX
(Currently in Columbia, SC)
>
> -larry (K8UT)
>
> -- Original Message --
> From: "j...@kk9a.com"
> To: elecraft@mailman.qth.net
for CAT control ?
Or is that idea too simple ?
Any advice would be appreciated.
Thanks and 73
Barry VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
or 0,1,2,3 or some
other sequence.
Thanks
Barry Simpson VK2BJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
accessory pockets
Arriba carry case
Complete set of photos viewable at
https://photos.app.goo.gl/Fpu7c55kWpWSepZh7
$1100 plus shipping
Please reply directly via email
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home:
This is the 21st century version of "my dog ate my homework."
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
ther
RTTY contesters who can also recognize their calls on RTTY.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq
limited condo for 9 years now. I'd rather not get
on the air than make QSOs (if that's still the correct term) with FT8.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net
Well I have no issue with Mike’s comments. I am always having to find ways of
making gear look nice and symmetrical.
It matters !
Barry VK2BJ
Sent from my iPad
> On 28 Jun 2018, at 05:04, Michael Blake wrote:
>
> I received and completed my KAT500k this morning and I must say it
ble or only
digital (DVI or HDMI)?
Hope this helps,
Barry Baines, WD4ASW
(Currently in Columbia, SC)
>
> Thank you,
> Mark
> WU6R
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mai
even touch on the other ham activities. Bjorn points out that he
uses his backstage, so do the majority of sailors. Having gear that tolerates a
salty environment would be great..
73,
Barry
K3NDM
On May 26, 2018 12:10:35 PM EDT, Wayne Burdick <n...@elecraft.com> wrote:
>Thanks,
, when you are scratching around for weak signals on 10m and 12m, preamp 2
makes a world of difference.
Barry Simpson VK2BJ.
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
should consider Bob’s Y-Box configuration for AG as an effective
interface between the two devices.
FWIW,
Barry Baines, WD4ASW
Keller, TX
> On Mar 29, 2018, at 12:06 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
>
> Tony,
>
> Unless you have a very old K3, the therma
station is located.
73,
Barry Baines, WD4ASW
Keller, TX
>
> 73 de Jim - KE8G
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
and software as a function of convenience at that
moment. But, I have no problem clicking on a spot and having everything go
there and waiting for me, to include setting up logging. You might just view
this as just another tool in the kit to maximize your operating.
73,
Barry
K3NDM
On March 27, 2018
Yes I did exactly what Lyle describes.
I was sure I had not done that when it was suggested to me by Elecraft when
I had the same problem.
But I had !! I corrected it, no harm done and it then worked fine.
Barry VK2BJ
On 27 March 2018 at 03:53, Lyle Johnson <kk7p4...@gmail.com>
Hi Craig
I would go for the 200Hz filters, not the 250Hz. I added the 200Hz to my
main and sub receivers (already have the 400Hz) and they are a really
worthwhile addition.
That's my opinion FWIW.
73
Barry VK2BJ
On 9 March 2018 at 03:57, Craig Buck <radiok...@gmail.com> wrote:
> Ge
John,
I wasn't using the Astron-supplied lug. I crimped another lug onto the
cable. Somehow, the wire within the crimp worked itself loose, after 10+
years.
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft
In transmit, the voltage was dropping from 13.3 to about 11 at the radio.
The ground wire side of the power cable had worked loose within its terminal
lug at the power supply, causing excess drop. Reattached and now the drop
is just a few tenths of a volt. Problem solved.
Barry W2UP
Yes, BAT MIN is set for 11, and my metered Astron is about 14,
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Was playing around in the contest last night and noticed BAT LOW momentarily
flash across the screen. I'm using a 70A Astron supply with very little
else on it. Power connector is tight. ANy thoughts?
Tnx,
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com
Ed, I had a similar issue, I too have an early serial number k3. Elecraft
says my rig needs to go in for repairs, there are some old pins on boards
that they say need upgrading to solve the power output issue. 73, Barry
K6ST
Date: Sat, 24 Feb 2018 13:57:05 -0800
From: Ed Schuller <esc
Ed, I had a similar issue, I too have an early serial number k3. Elecraft
says my rig needs to go in for repairs, there are some old pins on boards
that they say need upgrading to solve the power output issue. 73, Barry
K6ST
Date: Sat, 24 Feb 2018 13:57:05 -0800
From: Ed Schuller <esc
if you are going portable in the field. I purchased mine when the built
in speaker of my KX3 stopped working, the speaker is ok, I suspect it is
the headphone socket failure. I don't know if these speakers are
available in the USA but I would think so.
Barry G4DBS
---
This email has
Chris,
If all else fails, cheat. Probably the very simplest thing you can
do is mount an 17 meter element in parallel to the 80 meter element. It
will be cheaper and no less efficient.
73,
Barry
K3NDM
-- Original Message --
From: "Chris Hallinan" <challi...@gmail.c
ly lengthy transmission line run, you will
be using the lowest loss line for as far as you can go and then
transition. I would use a very low loss cable from the balun to the
tuner, something like LMR-400.
73,
Barry
K3NDM
-- Original Message --
From: "Alan Lambert" <a...@thelam
happy if I could use a sensitivity of a 1 uV on 80.
73,
Barry
K3NDM
-- Original Message --
From: "stan levandowski" <sjl...@optonline.net>
To: Elecraft@mailman.qth.net
Sent: 1/29/2018 4:20:06 PM
Subject: [Elecraft] KX3 Roofing Filter Question
I am going to order anoth
and I seem to have had a problem. In the about 2
years I've used my K3s, there has never been a hint of anything like
this.
73,
Barry
K3NDM
-- Original Message --
From: "tomb18" <tom...@videotron.ca>
To: "Barry" <k3...@comcast.net>; "Elecraft" &l
by
other signals in the passband, for instance FT8 with a received
bandwidth of 2.5KHz. Normally, the K3 AGC is excellent and should have
prevented what you describe unless the the AGC threshold is too high.
73,
Barry
K3NDM
-- Original Message --
From: "Tom" <tom...@vide
Here's my take on filters.
I intended to send it to the reflector but realise that I sent it direct to
K9MA only.
Barry VK2BJ
-- Forwarded message --
From: Barry Simpson <vk...@optusnet.com.au>
Date: 1 January 2018 at 14:09
Subject: Re: [Elecraft] filters
To: K
operating positions.
Thanks to all who provided help and advice, to Elecraft with their super
fast response and to the US Postal Service and Australia Post who both
excelled over the Christmas period.
Barry Simpson VK2BJ
__
Elecraft mailing list
.
I will advise the outcome when I have resolved it.
Thanks again to all.
73
Barry Simpson VK2BJ
On 17 December 2017 at 23:58, Drew AF2Z <pu...@af2z.net> wrote:
> I also have an early K3, ser nr apprx 400 earlier than yours. I got the
> ERR 12V fault a couple of months ago. As
me in the right
direction to check for a short in the PA module. What should I be looking
at/for ? The rig has not emitted any smoke nor has there been any burning
smells or unusual noises.
Any pointers would be appreciated before I take the rig apart.
Thanks and 73
Barry Simpson VK2BJ
I've been assembling and testing an ulralight portable FT8 setup for use
with my KX2, although it's based on an 8-inch Windows 10 tablet. It uses
the *Syba SD-AUD20101* USB soundcard. It works very well. I've posted
some notes here: http://k3s.wikidot.com/ft8sota
73,
Barry N1EU
On Mon, Dec
Wayne,
In case you weren't aware, Dual Watch is a term Trademarked by Yaesu. Next
thing ya know, you'll be saying SuperBowl. :-)
Barry W2UP
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http
.
It must be retaining heat through the 18 sec of down time before the next
transmitting cycle, and this slowly raises the baseline temperature. This
is evidently NOT a good use case for the KX2 at the 5 watt level, except
perhaps if the ambient temperature is low.
73, Barry N1EU
On Thu, Nov 23, 2017
(i.e., xmit for 12 sec out of each 30 sec period) with low SWR. How much
power are you running? Are you using extra cooling of any type?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
a switcher.
73,
Barry
K3NDM
-- Original Message --
From: "rich hurd WC3T" <r...@wc3t.us>
To: "stan levandowski" <sjl...@optonline.net>
Cc: Elecraft@mailman.qth.net
Sent: 11/19/2017 7:31:48 PM
Subject: Re: [Elecraft] (OT) - Unplanned Discovery
W
Yes, different use case. All my KX's have the internal tuner. But I was
thinking of an antenna configuration which would benefit from having a T1
mounted away from the operating position.
73, Barry N1EU
On Wed, Nov 15, 2017 at 9:00 AM, Dave Fugleberg <dave.w...@gmail.com> wrote:
>
with the special interface cable. A special interface cable is
NOT available for the KX2 or KX3.
Do I have this right?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
://www.maniaradio.it/en/bkttimesync.html
73,
Barry N1EU
On Sat, Oct 28, 2017 at 11:58 PM, Josh <j...@voodoolab.com> wrote:
> Yes, that! I set up NMEATime with a USB "puck" GPS receiver for EME with
> JT65 on a Windows machine not internet connected. Works great. Easy to
> se
0-30C, means it needs an external reference. The GPS
receiver is a viable solution.
73, Barry N1EU
On Sat, Oct 28, 2017 at 11:49 PM, Brian Hunt <huntin...@coastside.net>
wrote:
> Google NMEATime. Haven't tried it myself but one of the local hams is,
> along with a USB GPS rece
201 - 300 of 1488 matches
Mail list logo
