Hello Andy
The main reason I abandoned small transmitting loops was their susceptibility
to temperature variation, one cause being power input, the other due to
instantaneous change when the sun comes out.
Apologies for sliding off topic.
David G3UNA
> On 17/07/2022 16:38 Andy Durbin wr
Thanks for the note, Jim, I'll ask for advice.
73 David G3UNA
> On 15 June 2022 at 16:41 N4ST - Jim wrote:
>
>
> For some reason, your email and a couple others recently are showing up as
> [SPAM]
> ???
>
__
Elecraft mailing list
Hom
I answered this today and the response from the reflector came in blank.
This happens from time to time: I don't know why or how to fix it.
My answer was: I posed a question last week and got a response from Elecraft
support within a day.
73 David G3UNA
_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Steve
Great idea: did you use self-fluxing enamel wire? This is common on small
gauges used in signal circuits but not so common on large gauge wire used in
power transformers that I recall.
David G3UNA
> On 21 March 2022 at 14:38 SteveL wrote:
>
>
> As a valuable side note, the Hakko 808
Expensive:
20 years ago when I started working with Knowles mic elements for Mil headsets
they cost the firm GBP15 each in lots of 20k. One of the main criteria was
reliability. I recall the output was 100mV with a standard close-coupled tone
on the face of the capsule. The instruction to the s
With all desoldering tools it's important to *regularly* clean the inside of
solder debris.
David G3UNA
>
> > On 14 Mar 2022, at 05:06, Tony <73gu...@gmail.com> wrote:
> >
> > All:
> >
> > Can anyone recommend a budget de-soldering iron that can be used in tight
> > places? I need to remove
Ted
If the residue is clear, don't bother, you might create more damage than you
realise (ESD). If the residue is brown, you've been using the wrong solder.
If you really feel the desire for aesthetics then you can can brush it with
IPA, but beware ESD if there are sensitive components on boa
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Sounds like you are in need of a choke somewhere or a grounding issue.
David G3UNA
> On 07 December 2021 at 13:26 Tom Boucher wrote:
>
> Tom
>
> I've found that pressing tune again, immediately after a tune sequence
> sets it off to do "fine tuning" which might help.
>
> David G
Tom
I've found that pressing tune again, immediately after a tune sequence sets it
off to do "fine tuning" which might help.
David G3UNA
> On 07 December 2021 at 11:59 Tom Boucher wrote:
>
>
> Thanks NK7Z, NK7I and K8CN for responses.
>
> Dave and Rick indicated that running the K3 at a hi
le and QRP. We want that antenna to really work and understanding
> it better, helps.
>
> 73,
>
> Chuck K0MV
>
>
> On 11/4/21 9:59 AM, CUTTER DAVID via Elecraft wrote:
> > Hi Dan
> >
> > Good question. I'll answer as a non-expert as best I can.
> &g
Hi Dan
Good question. I'll answer as a non-expert as best I can.
This is essentially a quest for a multi-band dipole that is easy to make and
use. If you can put up mono band dipoles and beams for all your bands, you
probably will not bother going this route.
The popular description of the
Hi Jim
Not many folks have the space or ability to put up a full set of resonant
dipoles. The MODERN off centre fed dipole is as good as you'll get any
multiband antenna and for the most part will not need a separate antenna match
box.
I suggest you measure the common mode current on a dece
Jim
Don't stay stuck in the past: not all ocf dipoles are created equal.
With properly designed transformers and chokes, the common mode current can be
tamed to perfectly decent levels.
David G3UNA
> On 02 November 2021 at 18:25 Jim Brown wrote:
>
>
> On 11/2/2021 6:15 AM, Bill via Elecra
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
the TX radio to prevent its phase noise from being
> > heard on other bands. Just pressing PTT on the TX radio, even without
> > putting out any measurable power, will raise the noise floor on multiple
> > bands. With suitable band decoders driving filter selection,
> &
short time owning a Flex 6600M that had “state
> of the art” internal filters. Reading the Flex manual seemed to suggest that
> all bets are off when power exceeds 100w and you want to transmit on one port
> and listen on another.
>
> Paul
> W6PNG/M0SNA
> www.nomadic.b
Given the improved performance of modern transceivers, is there still a call
for high specification W3NQN band pass filters in a 2-transmitter station? For
example on a Multi-2 contest environment. For instance K3S + KPA + KAT. The
filter fitted between radio and amplifier.
I have the *feeli
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
You might find some answers here:
https://www.dj0ip.de/antenna-matchboxes/
On the next page he shows all the results from published data.
David G3UNA
> On 14 July 2021 at 07:29 Julia Tuttle wrote:
>
>
> That doesn't actually answer the question "what are manufacturers measuring
> when they qu
According to my calculations on MIL217 connectors are the least reliable of all
components from memory
David G3UNA
> On 10 June 2021 at 17:17 lmarion mailto:lmar...@mt.net >
> wrote:
>
>
> retried FAA electronic tech, I have fixed by far more by repluging or
> reseating a card or conn
Would a gas discharge tube save the sensitive parts?
David G3UNA
> On 05 June 2021 at 16:20 "Dr. William J. Schmidt" wrote:
>
>
> This happened with my backup amp at the contest station on J6. I left it
> connected by accident overnight (too much rum) and we had some static
> storms. Took o
Funny how things move around: back in 1914-15 they could do 300wpm on spark
transmitters and regularly worked 200wpm with 15kW stations up and down the
west coast USA. It wasn't said as such but we know it as FSK. Machine to
machine. Plus ca change...
David G3UNA
> On 06 February 2021 at
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
There was indeed a Loudenboomer made by a Brit back in the 60s / 70s and I
think it was G3TPW Steve Webb who moved on to make the Cobwebb antenna.
David G3UNA
> On 04 January 2021 at 13:14 Louandzip via Elecraft
> wrote:
>
>
> "Where ignorance is bliss, 'tis folly to be wise." ?
> On S
Sliding off topic a little: in designing some outdoor industrial control
equipment I was required to use some chunky, robust push buttons that were good
for high voltage, high current but no good at 12V. Getting to logic level I had
to build in a lot of extra current from 12V to ensure a good sw
There is a new manufacturer advertising in Sprat magazine. Model UMPP-1 is
advertised bench model and there are others $60 to US. Not quite "cheap" but
very small and good for travelling.
www.umpp-cw.com
gm0...@gmail.com
73 David G3UNA/G6CP
> On 18 September 2020 at 08:36 David Gilbert wro
a single core choke, so I'll take a
look at the new info.
73 David G3UNA
> On 03 September 2020 at 17:05 Jim Brown wrote:
>
>
> On 9/3/2020 4:21 AM, CUTTER DAVID via Elecraft wrote:
> > I use K9YC-style chokes, eg several turns on 240-31 core, or, if it's
> &
Ronnie
You might try measuring the common mode current on your coax feed in various
places, just a cheapo RF current meter clamped over the coax. That will tell
you if the chokes you are using are doing their job. I know for sure that cmc
causes considerable distortion of swr curves. Any ant
Perhaps it's more to do with the common mode impedance that these
transformers/choke present. Is the 4:1 a true Guanella or a Ruthroff or ?
David G3UNA
> On 02 September 2020 at 00:27 Rick NK7I wrote:
>
>
> If you model it accurately, you see that a 4:1 transformer will cause most
> (other
I would like that, would you sell outside USA?
David G3UNA
> On 21 August 2020 at 13:09 Howard Sherer mailto:h...@lehigh.edu > wrote:
>
>
> I have a like new KAT 500 for sale. $500. plus shipping from 18104
>
> Howard AE3T
> _
Jim and Dave
Let's start with Kevin KD5ONS and his 40m vertical. A great monobander and I'm
sure it performs very well on that band. He tells us it works great on most
other HF bands as well, using the wonderful Elecraft matching ability. Had he
stayed with that one antenna on that one band
Dave
You read something into my post that was neither there nor intended. This
highlights one of the oddities of emails: you can't write them to fit all
audiences.
David G3UNA
> On 01 August 2020 at 20:12 David Gilbert wrote:
>
>
>
> For what it may be worth, I'm a staunch supporter of an
6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 7/31/2020 4:27 PM, Phil Kane wrote:
> > On 7/31/2020 2:26 AM, CUTTER DAVID via Elecraft wrote:
> >
> >> A cheap and exceedingly sturdy tripod is a re-cycled/re-purposed rotary
> >> washing line.
> >
promise. I'd be interested in the reason why an antenna properly
> designed for a particular band is a bad idea.
>
> Dave AB7E
>
>
>
> On 7/31/2020 2:04 AM, CUTTER DAVID via Elecraft wrote:
> > With Elecraft matching units you don't need (and it can be un
A cheap and exceedingly sturdy tripod is a re-cycled/re-purposed rotary washing
line.
Remove the line for other things, eg guys and turn it upside down.
Peg the legs if it's windy.
Make/buy a clamp for your antenna pole.
I used this with a screwdriver antenna and a few radials on the grou
With Elecraft matching units you don't need (and it can be undesirable to have)
antennas made for a particular band. You make life easier for the matching
unit by making your antenna non-resonant on bands you want to use. That way
the unit does not have to cope with especially high voltages wh
Skip
Was any attempt made to redress the imbalance?
David G3UNA
> On 17 July 2020 at 03:19 Fred Jensen mailto:k6...@foothill.net > wrote:
>
>
> They were around somewhat before the patent in several forms, and they
> were around in 1960, which is the last time I looked hence my estima
Jim
We're drifting off topic and you're pushing at an open door.
I accept that wire size has an influence, but in my experience on smaller cores
(UK limit is 400W) wound with RG316 I have observed the core getting hotter
than the wire.
BOK = Brick On Key. I think it was Alpha that used this
est. It's horses for courses. A properly designed choke for an ocfd
will not over-heat but these are few and far between it seems.
David G3UNA/G6CP
> On 15 July 2020 at 21:07 Jim Brown wrote:
>
>
> On 7/15/2020 11:46 AM, CUTTER DAVID via Elecraft wrote:
> > Ferrite-cored
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Ferrite-cored chokes (balun) heat up and change apparent swr.
David G3UNA/G6CP
> On 15 July 2020 at 17:36 j...@kk9a.com wrote:
>
>
> That is quite an assumption. A 2el 40m beam with large efficient
> High-Q loading coils will have less bandwidth than for example one of
> the popular US m
Buyer beware.
I bought a superb, almost new, almost unused Bird 8141, in its original box and
it failed after a short while. Taking it apart it was obvious that it had been
well and truly cooked. It must have been hammered. The main connection had
corroded and separated from the element. I
Wayne did this at Visalia but I've forgotten how he did it. I recall he used a
little laptop.
David G3UNA/G6CP
> On 09 June 2020 at 04:20 Ken Widelitz wrote:
>
>
> Is anyone using a P3 remotely? If so, how? What is the bandwidth required?
>
> 73, Ken, K6LA / VY2TT
> ___
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Bob
I'm steering slightly off course and I feel I must come in: I presume that
during the manufacturing process, the amplifier goes through a production
process to set up the indicators using a lab quality load and modern, lab
quality power meter, regularly calibrated. I have a Bird with variou
For those with antennas that are "nearly right," eg provide <1.5:1 in a sweet
spot but not the entire band, like a beam or a dipole, a commercial matcher
that covers a huge range is not justified. A simple multi-tapped transformer
would satisfy those needs. A relay-switched unit should be rela
Hello Gill
Doing reliability calculations to MIL 217 was very instructive many years ago
and it taught me that operating well under the limits extended MTBF a lot.
Some military customers instructed that specs were 60% or more degraded to
achieve longer service life. What was your experience o
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Eric
I've watched kids use Morse practice oscillators of the simplest kind (we made
a kit for <£3 including the key) and they are absolutely taken by it. I don't
think they compare their cell phones with this system at all. We do because we
are aware of the technology, but kids see things diff
Wayne was looking for 1mW output. How does that equate in regard to the regs?
David G3UNA
> On 18 October 2019 at 22:58 Fred Jensen wrote:
>
>
> If they're unlicensed, they will be intentional radiators subject to
> 47CFR15 Subpart C [15.201 et seq] which imposes field strength limits
> tha
I'd like to suggest that one very good reason for using centre-fed and external
matching unit is because the harmonic pickup from nearby stations is much
reduced compared to multi-band antennas. This is best implemented when the
antenna is as near perfectly balanced as possible to avoid feedlin
o 10 volts. Analog readouts automatically do that
> compensation because you cannot read the meter scale with 4 digit
> accuracy. Even my 12 inch slide rule in college was limited to 3
> significant digits.
>
> There is a difference between doing it "good enough" and with
power measurements.
> >>
> >> 100 watts into 50 ohms is 70.71 volts
> >>
> >> 100 watts into 55 ohms is 74.16 volts
> >>
> >> 100 watts into 45 ohms is 67.08 volts
> >>
> >> 73
> >>
> >> Bob, K4TAX
> >&
I often wonder just how useful a precision dummy load really is in the amateur
service. I picked up home brew dummy load at the club the other day. It
measured 57ohms dc and comprises 4 wire-wound resistors attached in a cluster
across the end of the coax. After lots of disparaging remarks I
Thanks Wayne, something to look forward to
--David
-Original Message-
From: Wayne Burdick
Sent: Friday, May 24, 2019 3:39 PM
To: bear...@yahoo.com
Cc: Buddy Brannan ; Elecraft Reflector
; k...@yahoogroups.com; blind-h...@groups.io
Subject: Re: Elecraft K4 and Accessibility
Short ans
Is it possible to get the audio CW feedback on the K4, or even the K3/K3S?
--David
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Buddy Brannan
Sent: Friday, May 24, 2019 11:26 AM
To: Wayne Burdick
Cc: Elecraft Reflector ; k...@yahoogroups.com;
blind-h...@gro
ake a patent on it
but it was a very neat package.
David G3UNA
> On 17 April 2019 at 16:41 CUTTER DAVID via Elecraft mailto:elecraft@mailman.qth.net > wrote:
>
>
>
> __
> Elecraft mailing list
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
David G3UNA
> On 16 April 2019 at 03:28 Fred Jensen wrote:
>
>
> And, the outcome of the conversation was???
>
> 73,
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 4/15/2019 5:22 PM, CUTTER DAVID via Elecraft wrote:
> > I had a ni
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
I had a nice chat with Eric talking about remoting the P3
David G3UNA
> On 15 April 2019 at 23:01 Barry Baines via Elecraft
> wrote:
>
>
> Bill:
>
> > On Apr 15, 2019, at 12:18 AM, Bill Frantz wrote:
> >
> > No. There were the usual show special deals and the KPA1500 was emphasized.
> > The
I used a large sandwich box which held it very well indeed. Then it can be
popped into your ruck sack without further ado.
David G3UNA
> On 21 March 2019 at 17:24 Frank Krozel wrote:
>
>
> Always protect the front!
> de KG9H
>
>
> > On Mar 21, 2019, at 12:23 PM, Bryan Nehl wrote:
> >
> >
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
The most extensive measurements of real live dipoles using chokes and baluns
has been done by Rick DJ0IP. He made hundreds, if not thousands of
measurements with asymmetric dipoles. He measured common mode current with the
feeder straight down, off-centre and reversed on several bands to test
Sorry, I said Reg, should have said Louis
David G3UNA
> On 09 December 2018 at 16:30 CUTTER DAVID via Elecraft
> wrote:
>
>
> In addition, Reg was designing in the era of valve output transmitters with
> built-in pi-tank matching system, so, it was possible to match on
Noise cancelling that I've come across is limited to low/medium frequencies.
If your hearing takes you higher, the noise-cancelling has finished by then.
This is probably not the ability of the sensing mic but the circuitry and/or
room acoustics, echo, etc. I'm a little out of date on the sub
In addition, Reg was designing in the era of valve output transmitters with
built-in pi-tank matching system, so, it was possible to match on different
bands. I'm sure mine worked across 80 to 10m in those days. For 80 to 10m
these days I use a off-centre-fed dipole with hybrid choke/transform
Would a simple dip in varnish do?
David
G3UNA
> On 02 May 2018 at 12:35 Charlie T wrote:
>
>
> Yeas, but it's a destructive test, like checking the opening current for a
> fuse.
> I would guess that any core, whether ferrite or powdered iron would be
> subject to some water absorbs ion in not c
I have used twisted thick wires to encourage magnetic cancelling as recommended
by Jim Brown. The twisting also makes the cable easier to manipulate. I used
2 cores rescued from scrap household cable.
David
G3UNA
>
> On 11 April 2018 at 17:02 "j...@kk9a.com" wrote:
>
> My 70amp A
Yes, I already sent a message to Chris, hope he fixes that soon
David G3UNA
>
> On 04 August 2017 at 17:45 Wes Stewart wrote:
>
>
> They should fix some links on this site.
>
> On 8/4/2017 2:26 AM, David Cutter via Elecraft wrote:
> > Apologies for taking this away from Elec
My K3 s/n 4487 has exhibited similar behaviour since I built it in 2010.
Despite calls to Elecraft Support no solution was found despite Gary talking
me through various items until a month or so ago when the spike was causing
problems with my amp on 24 Mhz. It was mentioned that the K3 must see 13
77 matches
Mail list logo