Hi all,
Decided to reduce my asking price to $2600.00, including ship and
Insurance, CONUS. Same payment method.
Thank you
R Gilley
AD1G
Selling my KPA500 #3792 and KAT500 #2879. Both units clean and in top
condition, casual CW, no DATA or SSB, not used much due to antenna
Selling my KPA500 #3792 and KAT500 #2879. Both units clean and in top
condition, casual CW, no DATA or SSB, not used much due to antenna
restrictions. Includes interconnect cables for K3/K3S, power cables, KUSB
interface, KPA500 power ca for 240 Vac. Prefer to sell as a unit, but open for
dio to be thoroughly checked over and any other needed updates to
be made, which was good.
- Richard
On Fri, 15 Dec 2023 at 07:56, Doug Turnbull wrote:
> Dear OMs,
> The problem is that radio prices would almost certainly need to go up
> to give the dealer a margin after his/her
DX requests
6. Make stunning new DX contact
Thanks again one and all.
Cheers!
Richard Kunc
Secret Mountain Laboratory
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.
mit there’s no visual indication on which frequency I’m
transmitting. Should there be?
Cheers.
Richard
W4KBX
> On Nov 5, 2023, at 10:11 PM, Rich wrote:
>
> It is quite simple just long press the A>B button and you will be in SPLIT
> mode.
>
> Tell us what you are d
appreciate a step-by-step How-To lesson
in working split.
Thanks.
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Because I’ve seen several Q post here about the IC-7300 I’m going to try my
question again.
Is there a simple way to enter “custom” frequencies in the Band Stacking
Registers? For examples 14,000, 14,150, and 14,300.
I’ve scoured both manuals to no avail.
Thanks.
Richard Kunc
W4KBX
flat
What do we know about the Audio Technica ATH-GL3?
https://www.audio-technica.com/en-us/ath-gl3
Richard Kunc
flat...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
are the dregs.
So now I open again for other suggested headsets in the $100 range. The CM500
was a gaming headset so that could be a source. This is going to be a gift for
a friend who badly needs something.
Any more ideas?
Cheers.
Richard Kunc
W4KBX
flat...@comcast.net
Sometimes I run my K3s with a KPA500 and KAT500, other times I run an IC-7300
with the “500 Twins.” Both work fine.
I have a nagging question about the 7300, though. If you have your 7300 pretty
much figured out, please get in touch via my email address:
flat...@comcast.net
Thanks.
Richard
I just received my Yamaha CM500 headset and I have a question.
Can the mic boom be swiveled around counterclockwise so the mic can be on my
right side?
Didn’t want to try before asking.
Please reply to my email address:
flat...@comcast.net
Many thanks.
Richard Kunc
W4KBX
with a maximum price of $150. The only two
sources I’d like to avoid are China and Heil.
Looking forward to your ideas.
Cheers!
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I would like to know the callsigns and/or locations of the three SSB net
controls for antenna aiming proposes.
Thanks.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I've tried the following:
- Heil
- Yamaha CM-500
- RadioSport
Then I found the Inrad W1 http://vibroplex.com/contents/en-us/d9181.html
Hands down the best, in my opinion. It's over the ears, doesn't clamp
on, not heavy and is stout.
Rich - N5ZC
On 8/6/2023 11:37 AM, Eric Fitzgerald wrote:
I am using a KAT500 with an IC-7610, switching among three antennas. I have
similar problems, as follows:
On each band, I use only one of the antennas; on several bands there is
only one antenna with a reasonable match within the KAT500's capability. I
am relying on the KAT500's frequency sensing
memories ….” On a MAC M1.
Again thank you all for your kind replies.
R Gilley
AD1G
> On Jul 27, 2023, at 8:10 AM, Richard Ferch wrote:
>
> ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
> (or DTR-something), and something in the computer is activating R
ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
(or DTR-something), and something in the computer is activating RTS (or
DTR) at the time the radio is powered up.
If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY
to OFF-OFF (or OFF-DTR if you want
Hi all,
I loaded WSJTX on a IMAC and ran into this issue on my K3: I have receive and
Tx ok but I also have ERR PTT displayed. Pressing any key does not clear this
error and I have no access to power adjust as an example. CAT does go green
but still the error.
I have gone over my WSJTX
Yes, and if business trends are true…short line, discontinuing products, not
being able to keep up with new products, shortage of parts, that equals a
perfect opportunity for a Chinese company to come in and buy them with a new
name of ELECLAFT.
> On Jul 17, 2023, at 1:37 PM, Fred Jensen
First, you need to remember that the programmer's manual for the elecraft
radios does not tell you anything about the syntax of N1MM+ macro commands.
For that you need to consult the N1MM+ documentation.
Second, the ; at the end of each command is not punctuation, it is an
integral and necessary
space in my station. There’s lots of wiggle room
here.
3. 12 volts DC is available to power it.
4. An in/out (inline/bypassed) switch is essential.
Links to look at would be great.
Fingers crossed … VISA paid up and ready to rock and roll.
Cheers
W0VTT wrote:
"You can also do radio control through the same USB port, but if you want
to do both at the same time you need a port sharing program like LP Bridge."
The second half of this sentence is incorrect. You can do radio control on
the USB port at the same time as you are using the USB
elp support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r...@gmail.com
>
--
Richard Hill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.ht
It worked. Thanks.
On Sat, Apr 29, 2023, 2:02 PM W3FPR wrote:
> Rich,
>
> Try this -- bend the pins in just a little bit and try it that way. You
> don't have to bend them very much and they will straighten out when you
> get the job done.
>
> 73,
> Don W3FPR
>
>
I'm installing a new but old KXV3A board into the J66 block. The
instructions say the pins should just clear the top of J66 when the BNC
connectors are up against the top of the back panel opening. I am not
seeing a way to orient the board such that the pins clear the block. The
pins seem to
A potential explanation: the LINE IN level may have defaulted to zero.
The LINE IN level is adjusted using the MIC gain control, but only when MIC
SEL is set to LINE. So, you need to set MIC SEL to LINE (which turns
MIC+LIN off), adjust the MIC gain control to give the desired non-zero LINE
IN
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
Are you familiar with general hospital protocol with regard to patient
discharge procedure?
If you can help, please email me at my home address in the Cc line above.
flat...@comcast.net <mailto:flat...@comcast.net>
Thanks.
Richard Kunc
of the K3. I was looking for:
1. any cautions about clearance above the K3 and
2. whether the K3 is happy with a power combo sitting on top of it.
What practical advice is out there?
Thanks.
NU6T
--
Richard Hill
__
Elecraft mailing list
address.
Cheers!
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Who will be net control today on 20 meters?
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Will do, thanks! No worry here, Wayne. Will be able to give it a try
tomorrow.
Rich
NU6T
On Thu, Jan 26, 2023, 1:23 PM Wayne Burdick wrote:
> Hi Richard,
>
> Again, apologies to you and others for the long delay. Our supplier had
> their own supply chain problems, thanks to
FYI: My long ago ordered MH3 mic arrived today. Feels good, but I have not
used it yet.
Thought some would like to know that they are shipping.
Rich
NU6T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
The KPA1500 has been sold. Thanks
Rich W4WU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I have a KPA1500 in excellent condition for sale $5500 and I’ll split shipping.
It’s just back from Elecraft for updates and upgrades with new finals. Operator
error, no fault of amp. Looks like new and performs to specs per Elecraft tech.
I have several photos for serious buyers. Non-smoking
from the KAT500 and plug in a
separate 12-volt supply. This semi-acrobatic feat, performed by touch alone,
must be done every time I switch either way.
I’d prefer to let the K3S power the tuner, but is that safe?
Cheers!
Richard Kunc
W4KBX
flat...@comcast.net <mailto:flat...@comcast.
from the KAT500 and plug in a
separate 12-volt supply. This semi-acrobatic feat, performed by touch alone,
must be done every time I switch either way.
I’d prefer to let the K3S power the tuner, but is that safe?
Cheers!
Richard Kunc
W4KBX
flat...@comcast.net <mailto:flat...@comcast.
Does anyone have a KPA500 for sale?
Please respond to flat...@comcast.net <mailto:flat...@comcast.net>
Thanks.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Please, I would like to know the callsigns and locations of the three SSB net
controls for antenna aiming proposes.
Thanks.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I would like to know the callsigns and locations of the three SSB net controls
for antenna aiming proposes.
Thanks.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Where’s the 40-meter SSB net today?
Do I have the time wrong? 3pm EST Sunday at 7280?
Where can I get a schedule of all the SSB nets? Tried the website and Google ——
nothing.
Cheers!
Richard Kunc
W4KBX
__
Elecraft mailing list
Home
Do you have K144XV internal transverter and K144RFLK RF lock boards you would
sell? I am very interested.
Also, if you have PDFs of the installation and/or user manuals for them, please
email them to me at my home address:
flat...@comcast.net <mailto:flat...@comcast.net>
Thanks.
Richar
of these, please let me know.
Icom IC-7100
Ten-Tec 526 “6N2”
Anything similar. I’m open to suggestion.
Please use my home email: flat...@comcast.net <mailto:flat...@comcst.net>
Thanks.
Richard
W4KBX
__
Elecraft mailing list
Home
OK, here is a bit of view from the little pistol side. I made 135 contacts
from a low EFHW antenna and 99W. I'm not loud. I'm a CW novice. I hear
OK and send OK at 23 wpm. I practice and can hear simple exchanges up to
about 30 wpm. I struggle with callsigns and complex words and phrases. I
ist
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nu6t.r.
I no longer have an Elecraft radio so this Y-Box by N6TV is no longer of
any use. I also have a couple of cables for it. It was set up for me to
config. TX INH to HI=inh GND TX OK to allow RF output. I used it for EME
operation. I have the original configuration diagram by N6TV and I believe
he
you could notice.
I’d told this shortcoming as been addressed and corrected in the K4.
Cheers,
Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
heartbreak, or is my radio looking at ANOTHER trip to the
factory?
Firmware # UC 05.67
Cheers.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Never mind! I found it in the manual after all. The Adobe Reader “Find” box
doesn’t recognize all caps.
> On Nov 5, 2022, at 3:40 AM, Richard wrote:
>
> What’s the functional difference between FINE/COARSE and RATE? The
> difference between FINE and COARSE is obvious
What’s the functional difference between FINE/COARSE and RATE? The difference
between FINE and COARSE is obvious, but how do they differ from RATE? When do
you use which, and how? Couldn’t find even a mention in the manual.
Richard Kunc
W4KBX
I would recommend this, headset wise.
http://www.vibroplex.com/contents/en-us/d9181.html
Much better construction than the CM-500 and the Heil Pro Set in my
opinion. It does not clamp your head like a RadioSport.
I've tried them all and the W1 is my recommendation.
Rich - N5ZC
On
For a K3S, what should the current rating be of the in-line DC power cord fuses?
Has anyone come up with in-line DC power cord circuit breakers?
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I understood that ordered microphone parts were substandard when delivered
and new parts had to be sourced, delaying production.
Would you have preferred they delayed shipping the shack in a box until the
mics were available?
NU6T
On Fri, Oct 7, 2022, 12:12 PM David Gilbert wrote:
>
> I
One could also consider, "HF Vertical Performance-Test Methods and Results"
by N0AX and K7LXC, 2000. Available from Champion Radio Products or DX
Engineering.
They set this up as a reasonably reproducible test method to allow at least
somewhat comparable results accepting the inevitable
It would be interesting to see the results of a fully double blind
scientifically reproducible test done with traceable engineering quality
test equipment on a closed pedestrian mobile track.
NU6T
On Sun, Sep 25, 2022, 12:19 PM David Gilbert wrote:
>
> To be a proper comparison, the AX1 needs
I have a K3+ (serial # 593) in excellent condition for sale with a number
of the upgrades including the following:
KXV3B-F
KBPF3A
KFL3B-FM-IR-F
KTCX03-l-F
KI03BUPKT-F
About the only thing not upgraded was the synthesizer.
This is the 100 watt version and it has the auto tuner. It's in excellent
k3wyc said:
> ... The spotted frequency should be the suppressed carrier frequency ...
I don't think so. Most modern CW rigs that I am aware of, including the K3,
display the actual transmitted frequency on the dial, not the SSB
suppressed carrier frequency.
That is why the spotted frequency
If you might be able to help me with a reel to reel tape recorder that recently
quit, please get in touch via my home e-mail.
Thanks.
Richard Kunc
W4KBX
Elecrafter since 2017.
flat...@comcast.net
__
Elecraft mailing list
Home: http
Hi folks, I recently acquired a P3 with the Sensor module Rev B board and am
looking for a directional coupler 0-200w. Does anyone have one that they are
willing to part with? Please email me directly KQ9L.QRP gmail com.
Thank you.
Rich
KQ9L
Sent from my iPad
Is or was anyone here an actual working electrician? If yes, then I have a
question for you that should be dealt with off the reflector. Please holler via
my e-mail address if you think you might be able to help.
Thanks, and Cheers!
Richard Kunc
W4KBX
flat...@comcast.net
There is a good chance your battery came with, or should have, advice to
charge the battery every six months or less to keep it alive.
I know we hate to read instructions...but in this case it is an expensive
avoidance.
Had my education.
Nu6t
On Wed, Jun 29, 2022, 1:15 PM Drew AF2Z wrote:
>
I have a KPA500 for sale in like new condition. $1900 shipped in CONUS. Zelle
for payment or pick up with cash. Photos available.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
To all those who responded (or my still respond) to my inquiry about Mac
logging software — thanks. Very helpful stuff.
Cheers!
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
I’m looking for a simple basic logging program for the Mac, preferably one that
I can tailor to my needs, one that would be good for SSB contacts.
Any recommendations?
Thanks.
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http
For code practice, I tried plugging a straight key into the “KEY” jack on the
back of my K3s. I hear a tone when I operate the straight key but the volume is
low and I can’t change the tone.
How about some sequential help on this?
Richard
W4KBX
Wa
Half wave
On Wed, May 11, 2022, 20:09 Hank via Elecraft
wrote:
> I wish I knew as much about half wave dipoles as I think I do.
>
> Hank
> K4HYJ
>
> > On May 11, 2022, at 10:52 PM, Edward Mccann wrote:
> >
> > Concur.
> >
> > Slack reasonable cut.
> >
> > No dumb questions, just dumb
I’m trying to send this to the reflector at large, but it keeps attaching
John’s name. Sorry, John. This will be my third try.
Anybody out there super-well versed in the behavior of the half-wave dipole?
Cheers,
Richard Kunc
W4KBX
Anybody out there super-well versed in the behavior of the half-wave dipole?
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Anybody out there super-well versed in the behavior of the half-wave dipole?
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
levels
readily visible.
etc
Richard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Thank you!
On Thu, Apr 21, 2022 at 4:31 PM Wayne Burdick wrote:
> >
> > On Apr 21, 2022, at 3:24 PM, Richard Hill wrote:
> >
> > I thought the last call was to get on a list so they knew how much to
> order when suitable parts were found, and ultimately acquired, so
> Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ju...@juliatuttle.net
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help:
Well, that’s a great question but angled to a non answerable solution.
My take, and remember I live in New York, when companies put out a new model,
some run to try the new flavour of the day. Now that the bloom is off the rose
so to speak, we look back and see or ask ourselves being the times
Have you a KBPF3A General Coverage Board you’d sell?
Cheers,
Richard Kunc
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
It’s also worth mentioning that if the radio and the amp are hard wired
together, changing the band using the buttons on the front of the amp
automatically changes the band on the radio.
Richard
W4KBX
> With the band switching cable between the radio and amp, the amp follows the
> re
Hi
I believe for some intermittent time the tuner did not move the caps to
the antenna side. It is working now though.
All these boxes we have are computer controlled. I
Thanks all
On Wed, Feb 23, 2022 at 4:27 PM Richard Donner
wrote:
> Hi
> Well I checked the antenna and it i
that now it is automatically chosen.
This has been a nice study time to figure how this tuner works. It seems
fine now.
Thanks for the help all seems well.
On another note , my k3 has reached its 15 birthday year
Thanks all
Richard
On Wed, Feb 23, 2022 at 1:48 PM Richard Donner
wrote:
> I h
if the"amp key interrupt " was ever set properly.
How should it be set with a KPA500 amplifier all cabled up.
I did not see a simple explanation what these kat500 setting are for.
Any help would be appreciated. I think I am going for a walk
Thanks Richard wa6kyr
___
Hello Everyone. I would like to directly connect my K3S to a K3/0 mini,
basement shack to upstairs living room. All the information seems to use the
RemoteRig and internet to do the linking. Has anyone hardwired K3S to K3/O ???
Any help would be appreciated..
Tnx, Rick WA3MKT
Sent from
Can KAT500 frequency memories set by me be deleted either individually or per
band?
Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
center frequency for 80-meter SSB DX?
Thanks.
Richard — W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Looking for a K3/0-Mini…. Tnx Rick WA3MKT
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
No, not that kind, the wattmeter kind.
I need a 100-watt 2-30 MHz slug for my CD 81000-A wattmeter which uses the same
slugs as does the Bird 43.
MUST be 100 watts.
What’cha got?
PLEASE reply directly: flat...@comcast.net <mailto:flat...@comcast.net>
Cheers!
Richard Kunc ~
You may or may not consider this logical, but: The description of the
transmitter gain calibration procedure in the manual does not call up any
special calibration menu. It just says transmit a carrier at exactly 5.0
watts or exactly 50 watts. Apparently the firmware uses these power level
HI,
Selling my KX2 #02335 purchased Dec 2017, Lightly used and includes:
KXPD2 -paddle
KXBT2 -LI Battery
KXBC2 -Charger
KXAT2 -Ant Tuner
AX1/W40 meter coil
Tripod Adapter
Case (not CS40 or CS60)
32’ Counterpoise wire
Manual
Asking $1100. Inc. shipping and Insurance within the 48.
Photos
and to all those that responded
> On Dec 20, 2021, at 8:16 PM, Bob McGraw wrote:
>
> Richard et al:
>
> Just checked my KAT500 and it had V1.75 installed. Then with the KAT500
> Utility, version 1.21.9.15, I did download the firmware from the Elecraft
> site and install V2.0
Hi,
Having difficulty loading latest version of the Kat500 utility. The
version I have is 01.75, the utility indicates that 2.05 is available. However
the new version does not load but the message “ Input hex file is corrupt,
check sum is not zero”
I have the same issue attempting to
Hi all,
Had a falt on amp (swr) pushed reset corrected swr and now get no output. Seams
like reset not working. Any suggestions?
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
To use the RxAnt In/Out BNC connectors in the KXV3, you need to select the
RX Ant from the front panel RX Ant switch. This means you need a jumper
between RX Ant Out and RX Ant In to feed the RX in the K3, with a tee or
splitter to feed signal to the SDR. If you do not select RX Ant, the only
It might have been derogatory if I had named the other guy as you asked me to
do; the information I shared is absolutely true. What's your problem?
Richard
> On Nov 26, 2021, at 4:52 PM, Bob McGraw wrote:
>
> Richard:
>
> May I suggest you refrain from posting derogato
Is there any area within the 40-meter SSB segment where DX tends to congregate
or appear? I ask this for antenna tuning purposes.
Cheers,
Richard — W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I have the following items for sale:
*P3 with VGA card* in excellent condition, no scratches and used in a
non-smoking environment. No issues and I just took it out of service with
my early model K3. I decided I didn’t need it since I got an LPpan2 that
serves my purposes. $950 shipped and
care what he does
to anyone else's enjoyment. Power for power's sake is contagious.
On the other hand, I've made several 10,000 to 11,000 mile Australian contacts
with 15 watts and a hex beam at 30 feet.
Richard
W4KBX
> On Nov 11, 2021, at 2:17 AM, Jim Brown <mailto:j...@audiosystemsgro
I had a discussion about this sort of madness with Joe Taylor, creator of FT8
and WSJT-X. Here's what he had to say about it:
"Hi Richard,
"Yes, it's annoying when people engage in a QRO arms race to make more QSOs or
make them more quickly with FT8. Using high power is one
PX3 for sale, perfect condition asking $480.00, includes:
PX3CBL
Power Cable
KXUSB
Manual
Shipping CONUS included, USPS Priority Mail. Insurance add $25.00.
PayPal preferred or check, will ship when cleared. Photo upon request contact
off line at
er or copy
that to VFO B, then put 28.300 in VFO A? Can I use FREQ ENT to do the latter?
Thanks.
Richard Kunc – W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
through her house.
All help will be gratefully received.
Richard
W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
How about this? K3s, 100w, Hex Beam, Central Florida to Australia, 20 meter
SSB, LONG PATH, 15,727 miles; he was 5x3, I was 5x5.
Richard
W4KBX
> On Sep 13, 2021, at 3:03 PM, barry halterman wrote:
>
> Reminds me of the time, way, way back going up on MT. Diablo with a two
> met
I might be interested in buying one if anyone has one they aren’t using, as
long as I can find the Yaesu crystal.
Rick, W2JAZ
--
Sent from Gmail Mobile
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I unhooked the antenna from the switch box and plugged it directly into the
K3…tapped ATU…same lines.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
1 - 100 of 2332 matches
Mail list logo