Re: [Elecraft] Dust Covers

Hi hi!! On Saturday, January 20, 2024 at 07:50:57 PM EST, Kevin McQuiggin wrote: I heard of that lady.  Her name was Jean! Sent from my iPhone > On Jan 20, 2024, at 16:47, Thomas McCulloch wrote: > >  Hi Mike, > I have a K2 with a denim dust cover. It's really neat, i

Re: [Elecraft] Dust Covers

Hi Mike, I have a K2 with a denim dust cover. It's really neat, it looks like it was made from a pair of jeans! (It wasn't ...Hi) It even has my call embroidered on it. I bought it quite a few years ago right after I built the K2. As I recalled some guy was selling them privately and not

Re: [Elecraft] User's Dilemma

Thanks Don. Always nice to hear your take on things. you had repaired and upgraded my K2 quite a few years ago and its still in great shape!. Tom, WB2QDG On Saturday, December 16, 2023 at 08:52:06 PM EST, W3FPR wrote: Send it to Watsonville for the best service. Let me give you a

[Elecraft] Use of "delay" in K3 CAT Command Strings

I use buttons in the N1MM+ Bandmap to store CAT Command strings. This allows my remote operators to make radio setting changes easily while we are contesting remotely. When we switch back and forth between CW and SSB in mixed mode contests, it is very helpful to be able to turn the

[Elecraft] K3/P3 FS

Posting on behalf of the owner, KK4ODQ K3 S/N 5793 KPA3 100W KAT3 ATU KBPF3 Gen. Coverage in Main RX KR3X Sub RX KDVR3 Voice Recorder KXV3 Transverter/RX Antenna Input K144XV Internal 2M Transverter Filters - Main and Sub 2.80/0.40 P3 Does Not Have SVGA $2500/OBO Contact Nick, KK4ODQ

Re: [Elecraft] PayPal holding payment

There is another, very important reason NOT to accept payments via PayPal for casual, hobby related transactions. Effective this year, PayPal (and Venmo) now issues an IRS form 1099-K to anyone receiving more than $600 in a calendar year. Therefore, you have to report your proceeds as income,

[Elecraft] K3/K3S Options and Upgrades

Given the termination of options and upgrades, I’m concerned that the same thing will happen to K3/K3S service and repair. There are a lot of us here in customer land that will need that capability well into the future, therefore it’s loss or diminishment would adversely affect lots of folks.

[Elecraft] Other Radio lists thoughts.

Speaking of the Sherwood RX list, someone mentioned producing additional lists…here is some food for discussion….. possibly not on this list. List 1) Radio Receiver (RX) …..already exists. List 2) Radio Transmitter (TX)…..already suggested. List 3) Radio Ergonomics (RE) - a list of what is

Re: [Elecraft] KPA500 Question

Hi Jim, Sounds like an issue with the T/R circuit, you'll find some reports in the history of this list. I had a very similar case just one week ago - in my case it was R7 which was blown. The original type seems to be a 51 Ohm (type 1206 SMD) resistor - I've used now two 100 Ohm 1/4 watt

Re: [Elecraft] K4 Ethernet connection

to use shielded cat5e/cat6 cabling and grounding all switches etc. when in an RF rich environment such as your shack. 73 Thomas OZ5TN (aka M0TRN, AF7BE) On Wed, 9 Sep 2020, 19:29 Joseph Trombino, Jr, wrote: > Howdy Gang. > > Need someone with a bit of wireless experience to giv

Re: [Elecraft] K4 Remote Question

there to the rest of the shack. 73, Thomas OZ5TN (aka M0TRN, AF7BE) On Wed, 9 Sep 2020, 17:31 Pete Meier via Elecraft, wrote: > The K4 has an eithernet port for remote operations. As I understand it the > K4 doesn’t have WIFI . > My internet router is not close to my shack so direct CAT 5

Re: [Elecraft] With the K4 coming, is it time to replace this email list with a forum?

Actually I'm finding the discussion about the discussion of k4s is more annoying than the discussion of k4's. Just hit delete. Tom k2bew On Sun, Sep 6, 2020, 19:54 David Gilbert wrote: > > Ahh. Well then, I'd bet quite a lot of money that 95+% of that traffic > will have "K4" in the header

[Elecraft] Rack-mount K4

Will it be possible to 'fully' control a rack-mounted K4 via Mouse and/or K-Pod through a PC Monitor located a foot or so from each other? Thanks, Tom W4TMW __ Elecraft mailing list Home:

[Elecraft] Fwd: K4 Question

Third try with a different email address > Begin forwarded message: > > From: Thomas Donohue > Subject: Fwd: K4 Question > Date: May 28, 2019 at 2:22:41 PM EDT > To: elecraft@mailman.qth.net > > Second try > > Sent from my iPhone > > Begin forwarded

Re: [Elecraft] AXE1 extender?

I was going to ask the same question about the AXE1. A AX1 was waiting here for me last week when I returned from a business trip. I really wasn't sure what to expect but have a goal of doing more outside operating and antenna setup is always a deciding factor. If you only have a short time

[Elecraft] Fo(3):Best wishes!!!

https://www.msn.com/35299.htm?3735=cavncxju&16479=66876=6398429 http://alexandraknows.pw/comments/ya51llqui.php/09707.htm?677392=uwkmgwpq&5629=2951536=94798986 hey, how are you doing! It is better than all weight loss diets -- 09.01.2019 20:02:33 I am very grateful

[Elecraft] K3 audio problem

This weekend I suddenly began to have an oscillation problem in the speaker amp of my K3 (SN 969)) Headphones and the RX both work fine. I don’t hear the strange audio oscillation in the headphones), but the speaker amp appears to be having problems. If I turn on the speaker using SPKR+PH YES I

[Elecraft] Re(3): dxlab

an alley on our right. Come into thе hall. I shall be at my surgery until ten a. I have something really wonderful for you! i started and never looked back Keith Thomas 16.10.2018 4:56:26 __ Elecraft mailing list Home: http://mailman

[Elecraft] K3S settings for Heil HM-10 XD microphone

Thanks to all who responded to my query. I have since connected the HM-10 XD to the K3S and have found that the following settings work well for both the HC4X and HC5X cartridges. MC FP H, mic menu setting, and Mic gain 30. I continue to use the same transmit EQ settings as I used for the the

[Elecraft] K3S settings for Heil HM-10 XD microphone

I recently purchased subject mic and will be connecting it to the K3S shortly. Before I do that, I was wondering what mic settings to use? I currently have a Heil PR-10 mic and am using the MIC FP HI menu setting and a mic gain of 20; the PR-10 works fine, but I wanted to get a mic that I could

Re: [Elecraft] K3

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] Deleting Off topic email

t folder. > Presto -- you have your own digest on your computer. > > If you do not want to see the OT posts, simply create a filter to place > anything with "OT" into into your trash. > > Mozilla Thunderbird works nicely and is free - multiplatform as well. > > 73

Re: [Elecraft] Deleting OT

be quite interesting .. at least early > on. :-) > > Grant NQ5T > K3 #2091, KX3 #8342 > >> On Jun 16, 2018, at 11:20 AM, Thomas Schaefer > <mailto:t...@xmission.com>> wrote: >> >> While inevitably I will hear from people that I should just click hit

[Elecraft] Deleting OT

While inevitably I will hear from people that I should just click hit the DELETE key, I get the digest form of this email list. One cannot really delete only the OT posts when using the digest. Does anyone know if there is a way to have the qth.net list software automatically remove posts

[Elecraft] KPA1500 Serial Number 207 delivered

A brand new KPA1500 Serial number 207 (ordered 10/16/2017) arrived safely today. Great packing job and I was surprised the amp was heavier than the power supply. But they are both lighter than I expected. Now I understand the handle as they are each light enough to trust the handle. Regards,

Re: [Elecraft] Any KPA1500 received that were ordered after 1st day?

73 Torrey N9PY > Sent from my iPhone > >> On Apr 3, 2018, at 11:07, Thomas Schaefer <t...@xmission.com> wrote: >> >> I wonder if a better way to track how the KPA1500s are shipping (versus >> shipping status page) is that when someone on this list reports r

[Elecraft] Any KPA1500 received that were ordered after 1st day?

I wonder if a better way to track how the KPA1500s are shipping (versus shipping status page) is that when someone on this list reports receiving one, can you tell us the day you ordered it? I saw a report of serial number 56 which I assume is still a day one order. It would help those of us

Re: [Elecraft] KX3 Utility Segmentation Fault in Linux

Hi Rob, When I tried to start one of the utility programs today I got an error: (k3util:2054): GLib-CRITICAL **: g_hash_table_insert_internal: assertion 'hash_table != NULL' failed I think this is just a warning but it was followed by a segfault... All my Elecraft utility programs were affected

Re: [Elecraft] K3s Low sub receiver volume

over several years tried to help me get through this! 73, Tom W4KX > On Feb 28, 2018, at 7:18 AM, Thomas Doligalski <w...@mac.com> wrote: > > L-MIX-R set to A b > SPKRS set to 1. I don’t use an external speaker. I use a set of stereo > headphones, plugged into the rear (have a

Re: [Elecraft] K3s Low sub receiver volume

> On Feb 28, 2018, at 12:24 AM, Bob Wilson, N6TV <n...@arrl.net> wrote: > > CONFIG: L-MIX-R set to A b? > > CONFIG:SPKRS 2? Anything plugged into speaker jack? Mono plug or stereo? > > 73, > Bob, N6TV > > >> On Feb 27, 2018 6:41 AM, "Thomas D

Re: [Elecraft] K3s Low sub receiver volume

They are the same. Tom, W4KX Sent from my iPad > On Feb 27, 2018, at 7:40 PM, Scott wrote: > > Check NR and ATT are the same on both main and subrx. > > Scott > AD5HS > __ > Elecraft mailing list > Home:

Re: [Elecraft] K3s Low sub receiver volume

SUB AF: Normal Sent from my iPad > On Feb 27, 2018, at 11:35 AM, Thomas Doligalski <w...@mac.com> wrote: > > Normal > > 73, Tom W4KX > > Sent from my iPad > >> On Feb 27, 2018, at 11:23 AM, Mike Flowers <mike.flow...@gmail.com> wrote: >> >&

Re: [Elecraft] K3s Low sub receiver volume

gt; Changing this to NOR increased the AF output and made the SubRX behave the > way I thought it should. > > Sorry that I don’t remember the parameter name ... > > -- Mike Flowers, K6MKF, NCDXC - "It's about DX!" > >> On Feb 27, 2018, at 8:11 AM, Thomas Dol

Re: [Elecraft] K3s Low sub receiver volume

which is not the transmit antenna. > > The above is what I recall from years ago when I first installed a sub-rx. > My memory may be faulty. > > 73 de Brian/K3KO > >> On 2/27/2018 15:11 PM, Thomas Doligalski wrote: >> Also tried the front panel earphone jack, with t

Re: [Elecraft] K3s Low sub receiver volume

Also tried the front panel earphone jack, with the same results as the rear panel jack. 73, Tom W4KX Sent from my iPad > On Feb 27, 2018, at 10:05 AM, Thomas Doligalski <w...@mac.com> wrote: > > I use stereo earphones plugged in the rear. I get equal volume in both > earph

Re: [Elecraft] K3s Low sub receiver volume

Larry W0LRF wrote earlier this month: > There have been a few posts on this subject, but none had answers. > > > > > Both my main and sub receiver are on the same antenna. > > The audio volume from the sub is much lower. > > The AF for the main is…… let’s say at 9 o’clock….. to get equal

Re: [Elecraft] K3 No. 8527, CMP/PWR-Control not responding

Hi Arne, A few years ago I had an issue with one of the push buttons at one of the encoders (K3, SN #1160). This problem resulted in a complete mix-up of the function assignments of almost all buttons in the front panel - so I had to repair it. I decided to exchange all 4 encoders - because the

Re: [Elecraft] am i missing something?

Unobtanium?That’s what my pending KPA-1500 is made of too :) Tom NY4I > On Jan 30, 2018, at 6:20 PM, Lynn W. Taylor, WB6UUT > wrote: > > Optimistic. He knows they're made out of unobtanium. > > On 1/30/2018 2:54 PM, bill wrote: >> Even though I have one, I

Re: [Elecraft] Security cable attachment for radios

I use Tryten T3 cables. The T3 has a very strong glue to connect a hardened cable pass-through to a device without its own security slot. These cables and holders are made for server racks that need to he held more securely than a cable lock. Note the kit also contains some wedges to fit into

Re: [Elecraft] KPA1500 Manual?

> > Tom, > > With only minor exceptions, the KPA1500 should respond in the same way as the > KPA500 combined with the KAT500. > > 73, > Don W3FPR > > On 11/29/2017 11:53 AM, Thomas Schaefer wrote: >> At the risk of being impertinent and asking a quest

Re: [Elecraft] KPA1500 Manual?

3, > Don W3FPR > > On 11/29/2017 11:53 AM, Thomas Schaefer wrote: >> At the risk of being impertinent and asking a question about Elecraft gear, >> does anyone know if there were pre-release versions of the KPA1500 book? I >> am curious about the programming commands f

[Elecraft] KPA1500 Manual?

At the risk of being impertinent and asking a question about Elecraft gear, does anyone know if there were pre-release versions of the KPA1500 book? I am curious about the programming commands for possible inclusion in some software I write. If it helps, I promise to decode the manual using

[Elecraft] OT Response Grid Chase: Was Re: Don't sell that KX2 just yet...

Retrieved November 9. 2017 from http://www.arrl.org/international-grid-chase-2018: Satellite contacts count. Contacts made through earthbound repeaters do not count for the Grid Chase, but repeaters in outer space are the exception. There

[Elecraft] KPA1500 Enhancement

Hi to all: I'm changing the topic back to my original question, which has not been answered. Are there plans or thoughts to add a second RF input to the amp similar to the two RF inputs on the Yaesu VL1000? I'm not interested in SO2R, I am interested in feeding my K3 and K3S into a KPA1500,

[Elecraft] KPA1500 Enhancement

Hi to all: Wayne or Eric. Are there any plans or thoughts about adding a second RF input to the amp, similar to what the Yaesu VL-1000 has? Best 73, Tom/W1QU Sent from my iPad __ Elecraft mailing list Home:

Re: [Elecraft] (Elecraft) Linear thoughts

Hi to all: I had the strong suspicion based on what I heard an Elecraft rep say at last years Dayton Hamvention that a 1500W linear was being worked on; so, I was not surprised by Eric's request. My input is as follows: (1) 1500W+ output, key down; (2) light weight (30 lbs or less); if the

Re: [Elecraft] K2 kit ordering

Martin, why not order from a UK dealer? 73 Colin, G3PSM On 25 Feb 2017 4:53 am, "Martin Sole" wrote: > Hi, > > So it's time I got on with this, and I can see it happening really soon. > Before I proceed though I'd like to get an idea about shipping and delivery. > > The

Re: [Elecraft] K3S and Heil PR10

Hi to all: I apologize for the late response. I am using a K3S and Heil PR10 here and had the same problem as was noted in the original post. I have found that the PR10 will only work correctly using the HP input in the Mic settings. I use a mic gain setting of 12. I posted a note on this

Re: [Elecraft] 9:1 Balun

y solution for portable operations. 73 Thomas OZ5TN (aka M0TRN, AF7BE) On 1 February 2017 at 02:35, Kevin - K4VD <ke...@k4vd.net> wrote: > One thing I think would be great to have, especially built in as part of an > antenna tuner, is a switchable BALUN. When someone needs to throw up rand

Re: [Elecraft] 9:1 Balun

the long wire/counterpoise a bit is likely to improve your signal more than switching from a 4:1 balun to a 9:1, or none at all. 73, Thomas OZ5TN (aka M0TRN, AF7BE) On 1 February 2017 at 01:02, kev...@coho.net <kev...@coho.net> wrote: > We have all learned to say, "Yes De

Re: [Elecraft] 9:1 Balun

am.net/ehamforum/smf/index.php?topic=33274.0;wap2 73, Thomas OZ5TN On 31 January 2017 at 07:59, gliderboy1955 via Elecraft < elecraft@mailman.qth.net> wrote: > What are the advantages/disadvantages of using a 9:1 balun v. using the > switchable Elecraft balun at 1:1 or 4:1 or no balun a

[Elecraft] K3S Band data 1 connection to the Yaesu VL1000 query

Hi to all: This subject has been posted before and I found the answer on the Elecraft historical threads web page. In any event I tried the recommended solution but have not been able to get the K3S to key the VL1000. Specifically, I’m using a Band data one cable put together by Array

[Elecraft] K3S Mic Gain and Heil PR-10 Query

Hi to All: I’m using a PR-10 mic to drive the K3S; I find that I need to set the mic gain to 40+ to get sufficient output to push the ALC meter to nearly the top of its range. My XYL, W1JX, with a softer voice, needs to run the mic gain to the maximum setting (60) to achieve the same output.

[Elecraft] Multiple rig control and logging using a single Macbook Pro

Hi to all: I posted the following on the MacloggerDX site and got a partial response, so thought I would try here also. I have been using a Macbook Pro running the El Captan operating system and the MacloggerDX program for rig control and logging of a K3 for several years now and all is

Re: [Elecraft] Magnetic Loop Antenna Question

Hi Terry - I have two loops: the MFJ 1788 (40-15 meters) and the Ciro Mazzoni Midi loop (80-20 meters). I use the MFJ portable, on a MFJ tripod, and it works well, but better to answer someone's CQ than trying to call. The downside is it is limited to places you can drive up to - it is pretty

Re: [Elecraft] KXPA100 RS-232 problem

is well, but if it requires a lesser baud rate, set both the KX3 and the KXPA100 to that baud rate. 73, Don W3FPR On 11/4/2016 10:34 AM, Thomas Beltran wrote: > Hello John and thanks. Should I figure out what the baud rate of the > kx3 is (since that works) and then set the kxpa100 to

Re: [Elecraft] KXPA100 RS-232 problem

Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Thomas Beltran Sent: Friday, November 04, 2016 10:05 AM To: donw...@embarqmail.com; Elecraft@mailman.qth.net Subject: Re: [Elecraft] KXPA100 RS-232 problem Hi Dick John and Don and thank you. I checked everything

Re: [Elecraft] KXPA100 RS-232 problem

connector body "home". 73, Don W3FPR On 11/4/2016 9:37 AM, Thomas Beltran wrote: > I have read some emails concerning the RS-232 connector on the KXPA100's > back panel not working with software applications that need the rig's data, > but I did not see any resolution. In my

Re: [Elecraft] KXPA100 RS-232 problem

you will be able to seamlessly use the KX3 by itself if for some reason you don't want or need the amp. On Fri, 2016-11-04 at 06:37 -0700, Thomas Beltran wrote: > I have read some emails concerning the RS-232 connector on the > KXPA100's back panel not working with software applications tha

[Elecraft] KXPA100 RS-232 problem

I have read some emails concerning the RS-232 connector on the KXPA100's back panel not working with software applications that need the rig's data, but I did not see any resolution. In my case, I just set up a ciro mazzoni midi loop. This loop will follow the radio's frequency, getting data

Re: [Elecraft] Assembled K2 MAB boards available

On Fri, 23 Sep 2016 09:37:19 -0400 "Doug Shields" wrote: > Hello everyone, > > Months ago I took on assembling a small lot of the K2 MAB boards. > Life got in the way and it took a lot longer to complete the boards than > anticipated. I now have seven boards completed

Re: [Elecraft] OT: K2

On Tue, 20 Sep 2016 18:35:27 + Eric J wrote: > I had recently stopped monitoring the reflector as I only have a K1 and > two K2's. Everything is K3 and subject lines rarely reflect that anymore > so it's hard to filter them. But I had a K2 problem and rejoined. Got a

[Elecraft] P3 with K2?

Can the P3 display unit be used with a K2? If so, are mods necessary for either the K2 or P3? Thanks, Tom Taylor KE7TT -- Ever notice the first thing you see at an airport is a big sign that says "TERMINAL"? Have a nice flight. - Lewis Grizzard ^^ --... ...-- / -.- . --... - -

Re: [Elecraft] SSB Net Sunday July 10th

On Sun, 10 Jul 2016 15:23:35 -0500 James Wilson wrote: > W4RKS Jim in Fort Worth TX substituting for > Net Control WB9JNZ Eric in Chicago, IL > July 10, 2016 > > Many thanks for all of the relaying stations: > N6JW John in CA, KM4IK Ian in GA and NS7P Phil in OR > > Stations

[Elecraft] K3/100 for sale

I have my  K3/100 (serial number 61--) with KAT3; KXV3A; KBPF3; KFLA-400; KFLA-1.8; KFLA-2.8; KFLA-6; and KSYN3A for sale. It has been my backup rig and has seen little use. It has all the updates and has the new KSYN3A board installed. It is in mint shape and never seen cigarette smoke. I want

Re: [Elecraft] Elecraft Digest, Vol 144, Issue 9

; are erased. The meter outline and scale are still there. > > Both the SWR and power meters are blanked in this way when the transceiver > goes back to receive mode. > > Alan N1AL > > > On 04/06/2016 03:14 AM, Thomas Lindner wrote: >>> From the firmware note:

[Elecraft] P3 meters MCU 01.60

>From the firmware note: * SWR meter blanked: Both the analog and digital SWR displays are now blanked whenever the transmit power is too low to give a valid reading. What I have to do to get the meters blanked during reception? 73 de Tom DL2RUM

[Elecraft] WTB 15Khz Filter for K3 for FM

Hi Everyone We have a K3 with the KXV1 module for 2M in an existing K3. To run FM, do we just need to add a 15KHz roffing filter? If so, does anyone have one to sell that is sitting around collecting ham dust? Thanks Tom K9XV (W9VW)

[Elecraft] [K3/KX3] Memory Editor

I made e simple memory Editor: http://dl2rum.de/rumsoft/Elecraft.html It programmed my K3 and KX3 once and it worked fine for me. 73 de Tom, DL2RUM > > Is there a memory editor for Mac? I ask because I have been using the K3 > Memory Editor on and off via Parallels for quite some time but it

Re: [Elecraft] K3 - No RX/TX

Kudos to Howard at Elecraft support for immediately shipping out a new KSYN3A board. Hopefully it'll arrive in time for Christmas - UK Customs permitting. 73 Colin, G3PSM On 14 December 2015 at 11:56, Colin Thomas <colin.g3...@gmail.com> wrote: > Hi all, > > Before I bother

[Elecraft] K3 - No RX/TX

Hi all, Before I bother the good people at Elecraft support I would like some thoughts on the above problem. I have bulit and used K3 s/no 8943 for the past 8 months or so but a couple of days ago it stopped both transmitting and receiving. Yes I do have an antenna on it and my old FT1000MP

[Elecraft] K3 - No RX/TX

Thanks to everyone that has responded. It looks like the KSYN3A has died a death so time to contact Elecraft support. 73 Colin, G3PSM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K3 - No RX/TX

On 12/14/2015 2:15 PM, elecraft-requ...@mailman.qth.net wrote: > >> Message: 12 >> Date: Mon, 14 Dec 2015 11:56:13 + >> From: Colin Thomas<colin.g3...@gmail.com> >> To:"elecraft@mailman.qth.net" <elecraft@mailman.qth.net> >> Subject: [Elecraft] K3 - No RX/TX >> Message-ID: >>

Re: [Elecraft] Wire labeling - slightly OT (Ron W3ZV

On Tue, 8 Sep 2015 15:21:48 -0700 "Eric Swartz - WA6HHQ, Elecraft" wrote: > We're exceeding the OT posting limit on this one. Let's end the thread for > now. > > When an OT thread hits 5-6 posts, please try to limit additional postings as > much as possible to avoid the

Re: [Elecraft] Taking KX3 to Italy on vac number 2

Mille grazie- Thanks to all who responded. Good advice - I think I have everything necessary - and hope to see you on the air! A week in Piemonte and a week in Umbria with wonderful people, food, wine and ham radio! 73 Tom K4AEN

Re: [Elecraft] Proposed On-topic indication.

Thank you for posting that. I am at fault… The guidelines state: 5a. Please -do not- post publicly or privately asking people to stop a particular thread, no matter how long, off topic or repetitive it gets. Email me instead ;-) . I will step in when I feel it is necessary to end a thread.

Re: [Elecraft] K3: Old KSYN3 and KXV3A Boards

Ah behold the misplaced modifier :) Seriously, I would LOVE to hear if anyone takes Bob up on that offer. I have my old synth and I cannot imagine a case where someone would need one of these. If you had a failure now and needed to replace it, you would surely just replace it with the new one.

Re: [Elecraft] K3 FD report in high RF (K3 vs Flex 6xxx)

Are there moderators here? We are getting a bit far afield of Elecraft topics. :) Tom NY4I 727-437-2771 P.S. Drowning in email? I use SaneBox to instantly clean up my Inbox: http://sanebox.com/t/gdaz7 On Jul 1, 2015, at 5:13 PM, Fred Townsend fptowns...@earthlink.net wrote: Jim hits

[Elecraft] Latest P3 Firmware

I loaded MCU 1.35 Beta in January 2015 on my P3. I love the new P3 control commands. 1.35 was removed from the server some time later. Are there any news about a P3 firmware update that I missed? I use the new in 1.35 introduced CAT commands in my P3 control software, the latest production

Re: [Elecraft] KSYN3A + KSYN3

I just went thought this process and the new KRX3 comes with the new synth. I had to pick up a new synth to replace the old one in the main receiver as they have to match. It only took 12 hours to do it all including redoing the filters in the receiver because I did not read the manual close

Re: [Elecraft] Question about KRX3 install

Thanks. Well, I figured it out in that based on reading Fred’s book and the email from Fred, I installed the cable from the ATU to the KRX3. The issue is that the installation makes it seem like BOTH these items are optional (if you only want to run the sub RX off the main antenna and NOT do

[Elecraft] Question about KRX3 install

Hello, I have a question about the sub receiver I installed this weekend. The procedure for the aux antenna states you have two options for an AUX antenna, either put the BNC in the back of the radio OR connect though the KAT3 so the non used antenna port is the AUX. From reading the book,

Re: [Elecraft] Question about KRX3 install

[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Thomas Schaefer Sent: Saturday, June 13, 2015 8:30 AM To: Elecraft@mailman.qth.net Subject: [Elecraft] Question about KRX3 install Hello, I have a question about the sub receiver I installed this weekend. The procedure for the aux antenna

Re: [Elecraft] Question about KRX3 install

: http://sanebox.com/t/gdaz7 On Jun 13, 2015, at 12:56 PM, Jim Brown j...@audiosystemsgroup.com wrote: On Sat,6/13/2015 8:31 AM, Thomas Schaefer wrote: So If I follow you, I have to pick one of those two options? For all practical purposes, yes. Which you pick depends on how many

Re: [Elecraft] K3 to K3S upgrade kit?

Indeed, and I also love my K3 for all the fun it's brought me so far. But I guess I've got to admit I've become a bit of an Elecraft fanboy and just have to own the best they can offer :) 73, Thomas OZ5TN On 19 May 2015 22:27, Tony Estep estept...@gmail.com wrote: On Tue, May 19, 2015 at 3:12

Re: [Elecraft] Ham enthusiast arrested

But how will congressmen (women?) live without us paying the utility companies? 73, Tom On Wed, 1 Apr 2015 17:53:52 -0500 David Christ radio...@mchsi.com wrote: And feeds power back into the power grid so you have no more electric bill. David K0LUM On Apr 1, 2015, at 5:32 PM, David

Re: [Elecraft] Looking for a KPA500 Schematic

On Fri, 27 Mar 2015 12:53:33 -0500 Grant Youngman n...@tx.rr.com wrote: This is very similar to the car quits on the road diagnostic technique. The first step is to pull off the road. Step 2 is to open the hood and stare at the engine. Look everywhere. Look at it very carefully. Is it still

Re: [Elecraft] Amphenol PL-259

On Sat, 21 Mar 2015 17:06:07 +1000 Gary Gregory vk1zzg...@gmail.com wrote: Hi, Somebody recently commented on these and also right angle versions which are the variety i am chasing. Amphenol appear to be unavailable here in VK. Could somebody point me to a supplier please? Apologies in

[Elecraft] WTB Nicely cared for K3

Good evening everyone, I am just getting back into ham radio and I would like to find a well cared for K3 that needs a new home. The best candidate should be fairly well equipped with options and have the general coverage receiver module. If you have such in your shack please send the

[Elecraft] Hamfest in Tacoma, WA

Hi fellow hams Tomorrow (Sat 7 Mar) the Mike Key ARC is holding their annual hamfest at the Puyallup fair grounds. It is a swap meet with all types of items, not just ham gear. There are: computer stuff, general electronics, test equipment, tools, books, lighting equipment, and other

Re: [Elecraft] [Bulk] OT: Verizon's response to Net Neutrality: in Morse code!!

don't bother to read his posts. -- Original Message -- From: Colin Thomas colin.g3...@gmail.com To: Cc: elecraft@mailman.qth.net Sent: 2/27/2015 9:30:06 AM Subject: Re: [Elecraft] [Bulk] OT: Verizon's response to Net Neutrality: in Morse code!! Guys, Give it a break. I

Re: [Elecraft] [Bulk] OT: Verizon's response to Net Neutrality: in Morse code!!

Guys, Give it a break. I joined this reflector to learn about Elecraft products, not the state of the US Internet Service Providers problems! You do have subscribers from outside of the U.S. 73 Colin, G3PSM On 27 February 2015 at 15:13, Phil Hystad phys...@mac.com wrote: Well, I

[Elecraft] K3 memories and split

Hi, during testing my K3/KX3 memory management program for Apple OS-X I discovered an unexpected behaviour: Short: When recalling a memory, VFO B will not be set when it is currently on another band. Long: I have installed the Sub RX, using firmware MCU 5.09 and have set CONFIG:VFO IND to

[Elecraft] For Sale: SideKX (Original) Ultimate Kit for KX3 and PX3 (ships from Germany)

://gemsproducts.com/PX3.html http://gemsproducts.com/KX3.html Sadly I cannot use it, because it is not compatible with the N8BX weighted tuning knob. VY73 Thomas DK1EY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

[Elecraft] For Sale: SideKX (Original) Ultimate Kit for KX3 and PX3 (ships from Germany)

://gemsproducts.com/PX3.html http://gemsproducts.com/KX3.html Sadly I cannot use it, because it is not compatible with the N8BX weighted tuning knob. VY73 Thomas DK1EY __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] KAT500 Remote control tool for Mac OS-X

Hi Mac users, see here: https://itunes.apple.com/app/kat500ui/id940040854?mt=12 https://itunes.apple.com/app/kat500ui/id940040854?mt=12 I made a small and simple tool for the Elecraft tuner KAT500. It is NOT a replacement of the Elecraft KAT500 Utility application. It duplicates the controls

[Elecraft] K3 For Sale

I have a K3 S#00750 that is extra to my needs at present. It has the following: K3/100 KAT3 KRX3 KBPF3 KFL3A 1.8K 2.7 K 5- Pole KAT500-K $ 3000 + shipping to U.S. Address + Insurance SHIPPING BY FEDX thomas.mahaneyn...@yahoo.com

[Elecraft] KAT500 helper application fro Mac OS-X

Hi, i made a small and simple tool for the Elecraft tuner KAT500. It is NOT a replacement of the Elecraft KAT500 Utility application. It duplicates the controls and indications from the front panel and it shows some internals. See this screen shot to get an idea:

Re: [Elecraft] K3/100 serial 8290 - lost/stolen

caught. 73, Thomas OZ5TN (aka M0TRN) On 9 October 2014 13:59, John, 9H5G kk4...@gmail.com wrote: Hi all, Just a request to ask you if you might keep your eyes open for the above. It was in my checked baggage (no option :( ) on Tuesday and seems to have been mislaid at Gatwick Airport

Re: [Elecraft] another feature requestHello Elecraft,

Would this feature be available on the K2 at some future time? Thanks, Tom KG7CFC ## On Tue, 16 Sep 2014 07:44:53 -0700 Wayne Burdick n...@elecraft.com wrote: Hi Gerry, The KX1 provides Morse-code interface tones for all controls and the menu. The KX3 provides a Morse

  1   2   3   4   5   >