This happens when the K3 is receiving PTT from both the Signalink and the
software at more or less the same time. Do what Rick WA6NHC suggested and
just have HRD trigger send receive via the K3 commands, *OR* have the
Signalink do it via the PTT plug on the back of the K3, but NOT both.
73,
*Well all this speculation is fine, however, if every station calling CQ
from the US added the ability to RECEIVE one additional S unit, I think
this would be far less expensive than a 1500W solid state amplifier that is
just going to add to the QRM already on the bands.
I often hear signals from
I use FLDigi, but I had the exact same problem. You need to disconnect
the PTT jumper inside the SignaLink. It's easier to just disconnect the
PTT connector from the back of the radio if you don't need it. I needed
my PTT lead for an external KAM+.
For PTT, you need to use the program. I'm
Perhaps Elecraft could bring out a hybrid combiner/controller for those who
want to run more power than one KPA500 can give. A new product for Elecraft
and a boost to KPA500 sales. (Or maybe they already have it in mind).
No charge for this business consultancy ;-)
73 to all
Geoff
G3UCK
For those who don't believe Dave, here is some suggested reading material.
N6BT's new Antenna Book, Array of Light
He discusses the significant difference an extra 2db makes.
Yes he also sells antennas, but what he says rings true.
73 de Brian/K3KO
On 2/22/2012 07:54, David Gilbert wrote:
) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__ Information from ESET NOD32 Antivirus, version of virus signature
database 6904 (20120222) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
I think the talk about HEADSETS AND 1500 WATT AMPLIFIERS has be coverd ,can we
move on !
Don
W4DEE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I agree !
vy 73 deMit freundlichen Gruessen
Helmut - DL2MAJ Helmut Berka
-
On 22.02.2012 13:51, Don Etters wrote:
I think the talk about HEADSETS AND 1500 WATT AMPLIFIERS has be coverd ,can
we move on !
Don
W4DEE
I was working CW at 50 watts and happen to look up and see a whiff of smoke
on the rig end of the fuse holder. The rig never cutoff and the the meters
on the Astron indicated normal current and voltage. I immediately killed the
power.
The fuse holder was too hot to touch but I did disconnect it
Amen,
Gary; I have an Alpha 87A, and since I got the KPA500 it has set dormant on the
shelf. The 87A is fully automatic as is the KPA500, but the KPA500 changes
bands faster and has no warm up or detectable tune time. I can't count how many
DX stations I missed waiting for it to do the three
Including contests, sound cards, and signal reports...
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Farmers have learned that rotating crops improves
productivity and saves the land. Voters should
improve productivity and save OUR LAND by
rotating politicians
I think we're due for a repeat of the endless thread on soldering irons, aren't
we? :-)
73,
Ken
VE3HLS
--Original Message--
From: n...@n5ge.com
Sender: elecraft-boun...@mailman.qth.net
To: reflector
Subject: Re: [Elecraft] Can't we move on
Sent: Feb 22, 2012 09:05
Including
Managed to get output up to 4 and 2W on these bands, not as much as
mentioned in the original 2006 postings, but certainly sufficient for QRP on
these bands. So now, my K1 is capable on 80-10 including WARC. I have
found this little rig to be ideal for park bench portable. 73, Curt KB5JO
And now just think how great it would be if Elecraft technology were applied
to a 1500 watt brick on the key amplifier...Actually with an instant on
tube -- would be great! How about bringing back the old vapor cooled
amplifier with auto tune...Wow... 73 de Greg-N4CC
-Original Message-
Would you go for it if Elecraft just bought some Alphas with no paint and
painted on the Big E and added 2 grand for the effort?
Willis 'Cookie' Cooke
K5EWJ Trustee N5BPS, USS Cavalla, USS Stewart
From: Greg n...@cableone.net
To: 'Elecraft'
John the problems with this type of fuse (cartridge) and fuse holder are
legendary. The higher the current the bigger the problem. In the factory I
have seen entire lots of defective fuses and fuse holders. The problem is
made worse by soldering fluxes. If you must solder a fuse holder, be sure
Recently got feedback from John, ON4UN (also has K3) that his audio
playback from my K3 DVR was horrible. He played my recording of him back
to me and in fact it was pretty bad. Signals were solid. I have heard a few
other such reports about my K3 DVR playback. I cannot currently remove the
I have a K3 and I'm looking for inexpensive suggestions for desk mic.
Thanks,
- -
73 de Bryon/W7RIV
http://www.w7riv.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
It all depends upon whether you're looking for more power to compete
with QRM or QRN. If you're trying to rise above the QRM and everybody
does the same, there's not much net gain. At any given time, though,
the QRN is fixed and as best we know isn't smart enough to try to
compete with
On Wed, 22 Feb 2012 14:32:38 + k.alexan...@rogers.com writes:
I think we're due for a repeat of the endless thread on soldering
irons, aren't we? :-)
73,
Ken
VE3HLS
No
No its not that
which is the best mike to use with my K3 and do I have to change the
equalizers settings
Hi Al,
Indeed one could combine amplifiers by using Hybrid Combiners. However when
used for SSB and especially if driven by a typical amateur solid state
transceiver working from a 12V DC supply, a potential problem to be
considered is that the level of Odd Order IMD products as seen at the
Don't forget the custom knobs!
73,
Rick K7MW
On Wed, 22 Feb 2012 14:32:38 + k.alexan...@rogers.com writes:
I think we're due for a repeat of the endless thread on soldering
irons, aren't we? :-)
73,
Ken
VE3HLS
No
No its not that
which is the best mike to use with my K3
On 2/22/2012 8:44 AM, W7RIV wrote:
I have a K3 and I'm looking for inexpensive suggestions for desk mic.
Look for a used Shure 450 on one of the auction sites. Works great with
ham gear, including a K3.
73, Jim K9YC
__
Elecraft
And although I've posted this link before, here it is again for anyone
who missed it and wants to hear what a difference of 2 db makes.
Actually, there are several audio files there that compare various CW
signal levels at or near the background noise level:
a. six steps of signal strength
Possibly you guys should seek retraining on how to use email. If the
topic shown in the subject line doesn't appeal to you ... (read this
next part carefully) ... you don't have to open it. Yeah, I realize
that may not be intuitive for some, but there it is.
Dave AB7E
On 2/22/2012
Before Elecraft even considers or starts working on anything else new, I for
one would be most grateful if the powers that be would release the KAT-500
to market or at least provide some reliable take it to the bank type
information.
At recent hamfest Elecraft booth duty individuals are saying is
I came home for lunch today and my KAT3 was in the mailbox. I opened
the box and the zip-lock bag and was looking at it through the
anti-static bag and noticed that two of the toroids nearest the
connector are not perpendicular with the circuit board. The photo shows
them perpendicular with
I picked up my shiny new project from UPS today! I plan on updating this
thread as the project progresses.
This reflector looks like a wealth of related information, and several
local K3 owners are behaving like expectant grand parents...
73,
kb1vlz
You are right. Anyway, I hope they skip the KPA1500 and work on a KPA5000 or
KPA1 for us serious operators
George, W6GF
Love my two K3s
From: W0UCE w0...@nc.rr.com
To:
Sent: Wednesday, February 22, 2012 9:28 AM
Subject: Re: [Elecraft] Elecraft KPA 1500 -
I'd like to add my vote for the endless
why is the highly praised
insert_favorite_product
so poorly designed,
because anyone with any intelligence should know,
(even if, only 1% of users would have wanted it)
insert_ur_favorite_feature
wasn't included in the initial design!
p.s.
I tried really
Don't get me started on the custom knobs!!! :-)
73,
Ken, VE3HLS
From: Rick Dettinger k7m...@gmail.com
To: riese-k3...@juno.com
Cc: elecraft@mailman.qth.net
Sent: Wednesday, February 22, 2012 11:59:47 AM
Subject: Re: [Elecraft] Can't we move on
Don't
Come over to the dark side Luke. It's your destiny. D. Vader, 1977
From: Sam Morgan k5oai@gmail.com
To: elecraft@mailman.qth.net
Sent: Wednesday, February 22, 2012 12:44:54 PM
Subject: Re: [Elecraft] Can't we move on
I'd like to add my vote for the
I changed the subject line to fit my comments, better:
I have not seen the N2QY mods (not seen a link), so do not know what
it does, but it seems one merely needs the IF brought out for the
KRX3 (aux receiver) and that is easy, if you know how to use a soldering iron.
I did this to connect my
I had fun making my own. I founbd a base, clip and electret element at
Radio Shack. A piece of copper tube or plastic tub for a mic handle,
and some cable and plug to the radio and I had a nice desk mic. Drill
the base for a pushbutton, and some speaker wire to the PTT plug on the
back of
I would leave them alone. I don't think mine are 'straight' but it
works.
bill nr4c
On Wed, 22 Feb 2012 11:35:39 -0600, Joel Black wrote:
I came home for lunch today and my KAT3 was in the mailbox. I opened
the box and the zip-lock bag and was looking at it through the
anti-static bag
My K2/100 #3163 for sale complete as follows:
K2
KPA100
KAT100-1
KSB2
KAF2
KNB2
K160RX
KI02
FDIMP
All complete in excellent condition and working as it should from a non-smoking
shack. All documentation. Completely updated and aligned by Alan, W3DVX on
10/08. Over $1800.00 new from
Back in the PI days (pre-Internet), we wouldn't be typing messages to this
listserv. If we were home (instead of at work, as I am now) and we had
something to say about ham-related stuff, we would have gone on the air
and said it. Not a bad idea, actually. You guys who have the luxury of
being
Amend, Dave! Below is a copy of my response to a similar request some years
back.
***
Is it not just as easy to simply utilize the 'Delete' key?
I've always been a tad fascinated by a request such as this. If a group of
individuals enjoy discussing a certain topic and a few others do not, is it
First off for those wanting a KPA-1500, might consider combining two
KPA-500 for 1000w (much easier and cheaper). Otherwise, it makes
more sense to design a new 1200w amp around the new LDMOS devices
($250 range). Designs are being done for 6m/2m/432 with the
Freescale LDMOS and some folks
Do not be messing with toroids. They are NOT there to look pretty.
The manual may not specifically warn against all possible ill-advised
actions in your use of the product. There are millions of possible
ill-advised things you can do to screw up your product. DO what the manual
tells you to do
Can we make this reflector work the same way as the KX-3 reflector in that the
KX-3 emails have a listing of the messages with hyper links that brings you to
them directly? With the K-3 you have to scroll down and find them. Since the K3
list is so much longer, it makes it a lot to work to find
Didn't really need this KAT100-1 when I ordered it, just had an urge to melt
some solder. 50+ year kit builder (non-smoker). Kit completed 12/2011 up to
the point of constructing the K2 interface cable and final alignment and tests.
Initial resistance measurements all good. All parts
Is there a KX3 list somewhere? I would like to subscribe to that instead... I
can't
find one :-( There is much too much info on here that has nothing to do with
the
radio. TNX and VY 73, Lance
On 2/22/2012 6:39 PM, Richard Gracer [via Elecraft] wrote:
Can we make this reflector work
Lance,
It is on a Yahoo group, and although Wayne does post there at times, is
is not run by Elecraft.
73,
Don W3FPR
On 2/22/2012 1:51 PM, W7GJ, Lance wrote:
Is there a KX3 list somewhere? I would like to subscribe to that instead...
I can't
find one :-( There is much too much info on
Gee, what if Elecraft was to do a bulk buy of the CM500, and make them
available along with the other K3 parts/accessories? Might be convenient.
Just thinking...
Ralph, VE7XF
__
Elecraft mailing list
Home:
While I appreciate the concern about the warnings and what not to do, I was
not worried about cosmetics, but performance. I did not want that toroid
coupling to something it wasn't supposed to couple to.
I have built several kits one of which I specifically remember having to move
inductors
Hi Bert,
I have both the K2 and K3. I also operate almost 100% CW and in a casual
manner. I don't contest but, I work a lot of QRP. I had the same question
before I bought the K3. So, to answer your question based on casual
operating, I would say that there is little difference. I seem to
Has anyone used a LiFePo4 battery to run Elecraft transceivers? What
charging techniques do you use? What battery brand and or size do you use?
Your thoughts?
Thanks
John Lally
W7JJL
__
Elecraft mailing list
Home:
I think you are talking about the KX3 Yahoo group, we don't maintain that.
You can go to nabble , the threads are easier to see, not sure how the
links are handled.
http://www.elecraft.com/elist.html
Keith
On 2/22/2012 10:38 AM, Richard Gracer wrote:
Can we make this reflector work the same
I never use those fuse holders. My power cord for the K2 goes from a fused
(blade type) in an MFJ DC outlet to the rig.However, you and I discussed
the issue with those MFJ Outlets a week or so ago! The one powering my K3 sits
right behind the K3 on the wall so I can see it. Lesson
Here's a better suggestion:
Let's let Elecraft work on the products and their production that a lot of
us are really waiting for.
Their staff is doing very well handling what they have on the table now.
Maybe they'd have time to get the KAT500 out the door and
work on their plans for the future.
I have an FT-857D with the remote mic, the stock mic is sitting around doing
nothing. So I thought of an idea. Why not make an RJ-45 to 4 circuit TRRS
adapter and use the stock mic with the KX3?
When I installed my FT-857D in my truck I used a panel mount female-female
RJ45 I grabbed off some
Richard W6RIG wrote
Can we make this reflector work the same way as the KX-3 reflector in that
the KX-3 emails have a listing of the messages with hyper links that
brings you to them directly? With the K-3 you have to scroll down and find
them. Since the K3 list is so much longer, it makes
Someone asked about fem. RJ-45s. Cyberguys! sells RJ-45 jacks in both
CAT5e and CAT 6 -- some do not require a punch-down tool. See
www.cyberguys.com
John Ragle -- W1ZI
__
Elecraft mailing list
Home:
No.
100 amp HB power supply plus West Mountain Radio ISOPower.
Battery brand unknown. Three commercial server room backup batteries.
Larger than a car battery.
The ISOPower trickle charges the batteries. When mains power fails the ISOPower
switches the power to the batteries which can
If you mean using the k3 dvr to record someone and play it back to them, that's
a old problem Elecraft said they would address a year or so ago!!!
There needs to be a way to adjust the level and there is not at present.
Recently got feedback from John, ON4UN (also has K3) that his audio
Not sure if this get's you what you need.
http://www.cablestogo.com/product.asp?cat_id=107sku=20202
Scott, KB0KFX
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Microphone-idea-adapter-tp7309841p7310036.html
Sent from the Elecraft mailing list archive at Nabble.com.
Scott,
Thanks for the reply. However, that is the same part I have from my Yaesu
kit - female RJ-45's on both sides. The kind of jack I am looking for would
have a wire connection/mount on one side (mounts to a cable itself - just
like a male RJ-45 that we're probably all familiar with by now)
Thanks all! VY 73, Lance
On 2/22/2012 6:51 PM, W7GJ, Lance wrote:
Is there a KX3 list somewhere? I would like to subscribe to that instead...
I can't
find one :-( There is much too much info on here that has nothing to do with
the
radio. TNX and VY 73, Lance
On 2/22/2012 6:39 PM,
I'm brand new to RTTY. I have MMTTY setup so it receives and transmits
(AFSK) via VOX. I would like to do the NAQP/RTTY this weekend and use
N1MM. How do I setup N1MM to key the K3?
Would anyone be willing to share their N1MM RTTY macros? I'm not sure
whether RTTY requires a special key
John,
There are lots and lots and lots of web sites to buy both the batteries
and chargers. I normally buy my Hyperion batteries from allerc.com I
use them for my r/c planes. I use lipo's for my electric motors
(generating 2000 to 6000 watts depending on how big the plane is).
Anyways
Hi,
I have heard ON4UN on a number of occations fairly recently and found that
his audio *is* relatively bad. I suspect that he has an RF feedback problem.
Can anybody else confirm this? I have been very surprised that nobody has
mentioned this to him on the air, so I have held my tongue on the
How about an extension cable - change the one end to what you need?
http://www.cablesondemand.com/Library/InfoManage/Items.asp?product=MP-5TRJ45EXTE
rayW0PFO
--
On 02/22/2012 05:11 PM, Steve KC8QVO wrote:
Scott,
Thanks for the reply. However, that is the same part I have from my Yaesu
Spoke with John yesterday and his signal was clean and strong. Certainly didn't
hear any symptom of rf or a/c hum.
Why not drop him an email?
On Feb 22, 2012, at 6:07 PM, ab2tc ab...@arrl.net wrote:
Hi,
I have heard ON4UN on a number of occations fairly recently and found that
his audio
Hi,
A friend asked me about my KPA500. He read that it runs QSK and he would like
to run his IC -781 with the Elecraft in QSK cw. Is there anything other than
providing a relay cable from his ICOM to the KPA500 and running the ICOM QSK or
is there more to it for a non-Elecraft radio?
Just bought a fine used remote KPA100/KAT100 in an EC2 cabinet. It's neat,
but I'd like to put it under the operating desk, rather than beside the K2.
Can the K2 serial bus and the other 3 signals be extended for a total of 6
ft? Any problem remoting the RF by the same 6 ft?
Alas, the KPA100
Perhaps there will be more info released once the KX3 has been successfully
shipped; I imagine that is gt we haven't heard anything about it lately.
Matthew Pitts
N8OHU
Sent from Yahoo! Mail on Android
__
Elecraft mailing list
Home:
Ray,
YES That is a fantastic solution. I never thought of looking for a cable
like that, but that would do exactly what I need.
Even better, I found one locally at Microcenter - they call it a port
saver - 1' long. That will work wonderfully.
Heinrich Hertz is the feature today. Nice graphics
matt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
And all this time I thought his father's name was Cycle;-)
Tom wb2qdg
k2 # 1103
On 2/22/2012 9:26 PM, Matt Zilmer wrote:
Heinrich Hertz is the feature today. Nice graphics
matt
__
Elecraft mailing list
Home:
Chris,
Why not try locating the KPA100/KAT100 at 6 cable feet from the base K2
and see what happens. There is no real information available on that
subject that I am aware of.
There are cautions available - those cautions say that there *may* be
timing problems on the Auxbus signalling - if
TU Elecraft for adding 6m to the KPA500. Wrkd FK8CP on 6m from NW Tn
tonight. K3 wouldn't have made it alone. Nice to have a 6m amp !!
K9IL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hopefully someone out there is running Remoterig with their K3s that has
already been down this road...
I am in the process of debugging my setup, and have succeeded in getting
the radios to communicate with each other properly.
I am stuck at the following problem (I am sure there will be
On Wed, Feb 22, 2012 at 7:31 PM, David F. Reed w5sv.d...@gmail.com wrote:
Hopefully someone out there is running Remoterig with their K3s that has
already been down this road...
I am in the process of debugging my setup, and have succeeded in getting
the radios to communicate with each other
*Umm, as we get older we forget stuff ok?./.anyone remember how to lock
the K3 FP for a guest operator?
Gr...too many beers and too much QRM from close by Operators.:-)
All replies appreciated and be nice guy's ok?
gary
*
--
Gary
VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679,
You can lock the Mic, Compression and power levels with the PWR SET
configuration. Tap 1.
73 and cheers,
Fred
Fred Cady
The Elecraft K3: Design, Configuration and Operation
www.ke7x.com
fcady at ieee dot org
-Original Message-
From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
*Tnx to all who replied.I know, I'm gettin old ok?
ah..the joys of growing old.
Gary
*
--
Gary
VK4FD - Motorhome Mobile
Elecraft Equipment
K3 #679, KPA-500 #018
Living the dream!!!
__
Elecraft mailing list
Home:
I know I should be able to find this information someplace, but so far I
haven't come up with it, and I am sure someone has already designed these. I
would appreciate it if you would send me the plans. Please send to my email
k4...@arrl.net so I will be sure to get it. I am getting way to
John, I have a K2/10 and I am using this LiFePo4 battery installed inside
the radio.
http://www.batteryspace.com/lifepo426650battery128v3300mah42wh7aratewpcb.aspx
http://www.batteryspace.com/smartcharger15afor128vlifepo4batterypack4cells152vcut-offwith55mmx21mmmalebarrelplug.aspx
I contacted
But the signal contains harmonics...
Fred
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Matt Zilmer
Sent: Wednesday, February 22, 2012 6:26 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Check this - www.google.com
Iain,
that did the trick; thanks!
73 de W5SV, Dave
On 2/23/2012 03:49, iain macdonnell - N6ML wrote:
On Wed, Feb 22, 2012 at 7:31 PM, David F. Reedw5sv.d...@gmail.com wrote:
Hopefully someone out there is running Remoterig with their K3s that has
already been down this road...
I am in the
Wayne and Eric will have to address this. I can say I am having a blast
testing the KX3. I enjoy cw and digital modes and this little self
contained has shined so far. Still some firmware bugs being addressed but
the rig worked well as soon as I hooked it up.
A couple notes...
1. Excellent
82 matches
Mail list logo
