Bill,
I wonder if the Elecraft K3 has the I/O signals to easily implement a
remote head. This is a feature which has been requested in the past and I
think that Elecraft even had a prototype at one time but it died a death -
could be wrong on this last point.I too have hoped for this
Steve,
The only thing I can say is that there is more than enough audio drive
with my MH3 microphone.
Does your MH-31 work with plenty of audio on your FT-817 or FT-857?
My numbering scheme was consistent with a left to right convention
looking into the jack opening (like the diagram in the
How about: http://www.elecraft.com/K3-Remote/k3_remote.htm ? Uses
an Ethernet connection between the remote and the transmitter.
Mark AD5SS
On Fri, Jul 27, 2012 at 4:44 AM, Doug Turnbull turnb...@net1.ie wrote:
Bill,
I wonder if the Elecraft K3 has the I/O signals to easily implement a
Hello gang,
I have a number of blips (birdies) surrounding my VFO A display line on the P3
that faithfully follow it as I tune up and down. They are more visible on 40
meters but more down in the noise on other bands.
Is this normal behavior…to be expected?
Pete WK8S
While operating last night on 20m on my K3 serial 1391, I had an issue with my
transmit audio cutting out during PTT transmit. Also power output
simultaneously dropped out completely in mid sentence. I could see this both on
the power meter and hear it on monitor.
I currently use a Heil
Kieth,
In cases like that, the first things to check are the external cables -
in your particular case, the PTT.
If you are using the mic jack PTT, try the one on the back panel - if
that cures the problem check your cables again.
The other possibility is that something happened in your
Hi Don,
Thanks for the quick recommendation. I will give that a try this morning.
I did a complete switch out of the headset, PTT switch and adapter and
experienced the same cutout. I did consider this being an RFI issue. I was
doing a bit more ragchewing then usual last night.
I will try
Mark,
Yes the remoting capabilities are great but a simple pod such as TenTec
uses is what some of us would like. A good friend EI9KF is using a K3/0
with similar interface boxes and it is a pretty nifty arrangement.
Thanks.
73 Doug EI2CN
-Original
If what you are looking for is a multi-function remote tuning knob consider
using the Shuttle Pro 2 by Contour Design at
http://retail.contourdesign.com/
I've used this device in that role in my mobile contesting setup to control
the K3 which is in the rear of the vehicle and the operator is in
Hi,
Since I received my UPS tracking code last week I have been following the
parcel's track through the US, arriving in Germany and then going through
Denmark and Sweden before arriving in Oslo, Norway yesterday. The expected
delivery was next Monday before the end of the day. However, today the
That my friend is very hard to understand I'm sure, hope you get it sorted
out soon.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Frode LA2RL
Sent: Friday, July 27, 2012 10:54 AM
To:
On 26/Jul 17:43, Phil Townsend wrote:
Has anyone on this site fooled with Raspberry Pi for use with the Elecraft
line?
Just wanna know.
Phil
Hi Phil,
I've got a Pi that I bought with the intention of making a new
radio-focused image for it; been a bit short of time to make
much
They Raspberry Pi may be fine. Or it might be not. Because it's an
extremely limited device.
For example: doesn't have an Audio- (Mic/Line) input. So you need an
USB dongle for it if you want to do any data mode stuff (e.g. with
FLDIGI).
Doesn't have an RTC clock, so always starts at 1st January
UPS is very, very good at their business. Bet you have it tomorrow!
Imagaine how surprised the other person is that they received a radio and not
clothing!
God Bless Best 73!
Jack - WE5ST
From: Fred Smith m...@mo-net.com
To: 'Frode LA2RL'
Man that's way worse than getting socks for Xmas!
On Jul 27, 2012, at 11:42 AM, Jack Berry we...@yahoo.com wrote:
UPS is very, very good at their business. Bet you have it tomorrow!
Imagaine how surprised the other person is that they received a radio and not
clothing!
God Bless Best 73!
Knowing that there are a number of KX3 owners who are interested in an computer
interface that does not rely on VOX mode to transmit CW or digital modes from
the
computer, I have outlined the interface that I am using here:
http://www.bigskyspaces.com/w7gj/KX3.htm
Good luck and happy DXing!
It should be technically feasible to use the high-speed protocol
that was developed for the RemoteRig solution to implement a remote
control head that talks over a serial connection to the K3. It'd
essentially be a K3/0 in a compact package, suitable for moving around
the desk, or mounting on a
Lately UPS has not been very, very good...
I ordered a speaker from a company in Las Vegas, NV; I'm in Tucson. It was
shipped on July 2 and scheduled for delivery on July 5, according to UPS' own
tracking data.
On the morning of July 5, it was Out for delivery. Imagine my surprise to
see
On 7/27/2012 11:57 AM, Lance Collister, W7GJ wrote:
I have outlined the interface that I am using here:
Looks like a great solution, Lance. Just enough, not overkill. Thanks
for posting.
73, Jim K9YC
__
Elecraft mailing list
Home:
Tigertronics is peddling the SignaLink. I've been using it for a long
time on my TS-50 with the idea to use it on my KX3. I checked last night
and found that they have the cables and the KX3 jumper plug. I've really
been happy with this unit and suggest that you have a look. I paid $100
which
This thread caused me to check up on my own expected shipment of a new
LNRPrecision (PAREndFez) 40/20/10 dipole I've been waiting for.
I went to the tracking website and look at what I found:
Poughkeepsie, NY, United States 07/27/2012 8:25 A.M. Transportation
accident occurred.
Can you
Keith, From your original post you seemed to say that the signal output
dropped whilst the K3 was still in TX,
i.e. you say during PTT transmit . So was the TX indicator active during
my transmit audio cutting out ?
This would indicate no problem with the ptt, but the audio - signal circuit
Signalink USB is nothing more than a repackaged $10 USB audio dongle.
It does not provide any USB to serial functions and no access to TxD,
RxD, DTR, RTS. Lance specifically needed TxD and RxD for computer
logging and RTS for advanced PTT.
The alternative to the WestMountain Radio Nomic is a
Here's a similar story about FedEx, with a happier ending.
As a beta tester for the K3, I was sent some new boards by FedEx. It was a
Friday, and I
really wanted to install them over the weekend. I was watching the FedEx site
all day. The
package was out for delivery when suddenly at about 5
I wonder why so many designs talk about the Microphone input on the PC.
Is a Line in that uncommon?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
With the rush by hams to using laptops for their ham station (lack of
room is an often cited reason), they will find no Line-in - only mic-in,
and that mic-in is not stereo either.
While I believe that a desktop computer sitting under the operating
table with real serial ports and real
Dear Elecraft Team,
Is it possible to publish the KX3 phase noise measurements on this link:
http://www.elecraft.com/K2_perf.htm#Main%20RX%20Table
Thanks in advance. Regards,
Nikolay / LZ1NRD
-
Mail.BG: Безплатен e-mail адрес. Най-добрите характеристики на
I'm far behind on e-mail, so apologies for being late on this comment. Also, I
notice that when I use a slashed zero in my call, a ? is substituted.
FWIW,
Yes, true in part as was the experience from the old analog data days, but the
'self-cleaning' action was usually due to a wiping action
Nikolay,
That data is not yet available. The chart is a compilation of
independent testing by ARRL and by Sherwood. Neither have completed
testing ot the KX3.
You can look at the KX3 specifications to get an idea of the
performance, but phase noise is not in the listed specification
I recently got a mini keyboard that works with the P3/SVGA/Latest Firmware. I
got it from a company in Houston, Texas called Directron
(www.directron.com/akb110b.html). It is a Adesso AKB-110B for $23.99. It is
an 87 Windows Key layout, nice and small (11.75 X 6 X 1 in.) with a 6 ft.
USB cable.
An UPS story:
Some years ago, I sent my TS-940 transceiver to the
Kenwood repair facillity in California (from here in
western Washington). Kenwood repaired it in a timely
fashion. It was shipped back to me via UPS. UPS dropped
it, smashing in the left rear corner about 1 1/2 inches
as it is
The KX3's phase noise is quite low based on our measurements. We're
waiting for corroboration by two other testing organizations before we
post numbers. Probably in a couple of weeks.
73,
Wayne
N6KR
On Jul 27, 2012, at 2:15 PM, picmas...@mail.bg wrote:
Dear Elecraft Team,
Is it possible
Thanks Wayne,
I'm not in hurry at all, just wondered what are the measurements of
the youngest Elecraft family member (not that I listen at measurements
from my speaker, but just of pure curiosity).
(And guys, don't smile/laugh - everyone of us is just looking for a good
excuse to say ...OK,
I'm still waiting for my box of clothes!
73,
Rick Dettinger K7MW
On Jul 27, 2012, at 1:15 PM, stan levandowski wrote:
This thread caused me to check up on my own expected shipment of a new
LNRPrecision (PAREndFez) 40/20/10 dipole I've been waiting for.
I went to the tracking website
On 7/27/2012 1:51 PM, Vic K2VCO wrote:
Here's a similar story about FedEx, with a happier ending.
I instantly called their 800 number and got a human! She called the driver
and he actually
appeared in about 10 minutes. He apologized, saying that he had been on the
next block.
Since
Adrian,
I am looking at this as an rfi issue first and foremost. I am going to clean up
a little bit inside the shack. That particular K3 has been suffering with
unusual noise with my new SteppIR three element that was put up less than a
month ago.
To answer your question, the K3 was in
One final story before Eric lowers the boom:
Many years ago I bought a special hand-drawn cartoon as a present for a
good friend who was retiring. I had it professionally framed, packed,
and sent via UPS. The friend reported that the glass in the frame had a
crack when it was received. Back to
My K1 is sold. Thank you to those that responded to my add.
Tony Castellano W1ZMB
tcaste...@optonline.net
Hopewell Junction, NY
RV-6
N401TC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Just be glad you weren't with that box at the time, Stan!
73, Ron AC7AC
On Jul 27, 2012, at 1:15 PM, stan levandowski wrote:
This thread caused me to check up on my own expected shipment of a new
LNRPrecision (PAREndFez) 40/20/10 dipole I've been waiting for.
I went to the tracking
Keith, OK on that. I have had a similar experience;
Clamp ferrites on the mic line are beneficial, about 6 or so(wrap the core
as much as possible, allowing to shut).
# A series rf choke and 0.1uF bypass(to gnd) at the amp end keyline is
beneficial also.
Clamp ferrites also on the keyline help
I am implementing these suggestions. I have a balun design 1:1 current choke
that I plan to put at the entrance of the shack. I loaned it out but just asked
for it back. I will ferrite up the key line to the Quadra amp. I have added
some ferrites to the microphone.
Thanks for the suggestions!
It has become increasingly common to do jack sensing and provide
MIC/LINEIN on the same input. Check your laptop specs to see if it's
offered.
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I'm not saying/thinking that at all. I love my new KX3. I do know it will
not be last radio, however. Thankfully, so does my wife...
73,
Bruce, N1RX
(And guys, don't smile/laugh - everyone of us is just looking for a good
excuse to say ...OK, this really will be my last radio, I promise!)
Yeah well I wonder what's up. I got a roofing filter too many in my
shipment from Elecraft so they sent me a SASE envelope with tracking number
to send it back. I put the filter in the envelope and mailed it (USPS). and
to my surprise received is back in the mail 2 days later. Ok, I admit, the
Holger,
Laptops, which are very popular, may have only 2 jacks, headphone and mic/line
in. My Toshiba is set up that way . The input can be either mic or line in; I
can't have both.
73,
Barry
K3NDM
- Original Message -
From: Holger Schurig holgerschu...@gmail.com
To: Joe Subich,
Joe,
The SignaLink uses the radio's PTT on the mic connector to switch from rx to
tx. That is all that is really required. However, it does have a built in sound
card that does work better than the one in my laptop. All power is taken from
the USB connection to the computer. It's a complete,
The SignaLink uses the radio's PTT on the mic connector to switch
from rx to tx.
The PTT is nothing more than a diode, capacitor and NPN transistor
that forms a crude VOX circuit and can be added to the $9.99 USB
audio dongle for about $2.00 by any competent amateur.
That PTT does nothing
While I agree with Don about desktop space, I have a tower machine and a wall
mounted 23 inch monitor that take up no space on my operating desk, I have zero
serial ports. I have 8 USB ports with my K3, KPA500' my SteppIR controller, a
USB headset for Skype, a receiver for my weather station, a
Gosh. I'd need a 60 monitor on the wall to be able to read anything!
A 20 monitor 27 away is almost too far away.
73 de Brian/K3KO
On 7/28/2012 00:44, John's email wrote:
While I agree with Don about desktop space, I have a tower machine and a wall
mounted 23 inch monitor that take up no
As usual, Joe is RIGHT ON THE MONEY! If I had a dime for every EMEe'r who was
had
troubles created by trying to use a Signalink, I would be sending this email
from the
beach in the Carib! I NEVER recommend them to anyone who is serious about
running
any kind of power on digital modes
I was waiting for a VHF/UHF all mode rig and the tracking page said there was a
delivery exception. Calling them they said there was a labor action at the
delivery address and their drivers will not cross a picket line. I informed
them it was a private residence and ask if it was my cat
I got a buddy of mine to get on 6m this evening to try out the mic on SSB. He
said I sounded just fine. I did not adjust any settings, I had it on full
mic gain and compression the whole time. I was able to get 10-12 watts out
(off the meter on the rig, didn't hook it to an external meter/monitor)
On 7/27/2012 6:03 PM, Lance Collister, W7GJ wrote:
If I had a dime for every EMEe'r who was had
troubles created by trying to use a Signalink,
In addition to the deficiencies Joe and Lance have noted, the Signalink
also has Pin One problems, which are a well known cause of RFI, hum, and
buzz.
Just a bit of feedback on keyboards, it seems simpler is better.
I purchased a flash new Dell SK-8135 keyboard and it it would not work.
Dismayed I remembered getting my son a simple rubberised (rollup)
keyboard some time back .
This is real tough and would be good for field use and
54 matches
Mail list logo