So how many of you received your T1 today? I did.
--
John K7SVV
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
___
Elecraft mailing list
Post
It won't take you 9 months to build it but you may experience a desire
for pickles while you are soldering.
John K7SVV
On Apr 7, 2005 12:40 PM, Yves Dussault [EMAIL PROTECTED] wrote:
Unbeliveable!
K2 4875 just came in!
3 day delivery to my door, after I ordered it!
I hope I will not need 9
, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
is so , Eric, if you will
whisper it in my ear, I promise not to tell anyone.
John [K7SVV]
On 5/15/05, Ward Willats [EMAIL PROTECTED] wrote:
Well, look what was in the morning paper...
http://www.santacruzsentinel.com/archive/2005/May/15/biz/stories/01biz.htm
Ken,
Is it sending dits, dahs, or a continuous signal?
John
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
and the version # but the tag on the KFL1-2's PIC chip
states K1 I\O which sounds suspiciously like a wrong part. Could any
of you take a peek at your KFL1-2 and let me know what its tag says?
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft
You can become accoustomed to either but I prefer the narrow range.
The knob is much more sensitive on the wide range.
John [K7SVV]
On 5/31/05, ta2ah-2 [EMAIL PROTECTED] wrote:
Hi all,
I will get my K1 with KFL1-4 to build. I want to know your opinions, which
VFO range I have to select
that it is much quieter.
John [K7SVV]
On 8/10/05, ROBERT CARROLL [EMAIL PROTECTED] wrote:
I have recently moved to a new QTH and am slowly getting things in shape to
get back on the air. I ran into a lot of nasty RFI problems. The previous
owner had installed smart house wall switches throughout
of software replacing all of its predecessor's and be worth
a hoot but I was wrong. HRD is a marvellous program. I am using it
on my VR5000, K2, IC-756PRO, and IC-703. Thanks again.
John [K7SVV]
On 8/23/05, Simon Brown (HB9DRV) [EMAIL PROTECTED] wrote:
- Original Message -
From
in the 40 meter band.
John[K7SVV]
- Original Message -
From: Mike Scott [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Wednesday, March 19, 2008 4:52 AM
Subject: [Elecraft] What happened to AM mode?
After uploading new firmware 1.77 and 1.58, AM mode has highly distorted
audio
to pay better
attention I guess.
John[K7SVV]
- Original Message -
From: David Ferrington, M0XDF [EMAIL PROTECTED]
To: John [K7SVV] [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; Elecraft@mailman.qth.net
Sent: Thursday, March 20, 2008 1:33 AM
Subject: Re: [Elecraft] What happened to AM mode
James,
Great idea. I am going to have to build me one of those.
John[K7SVV]
- Original Message -
From: James Duffey [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Cc: James Duffey [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, March 21, 2008 6:21 PM
Subject: [Elecraft
Clark,
If you have already plugged an RS-232 cable into the KIO2 make sure
it was the modified Elecraft cable and not a standard cable that may have
been laying around the shack. Doing this will damage the KIO2 but I don't
know if it will cause it to overheat.
John[K7SVV
I worked on the F-106 for 4 years and never saw a connection on a connector
that wasn't soldered.
John[K7SVV]
- Original Message -
From: Jeremiah McCarthy [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, April 02, 2008 8:47 AM
Subject: [Elecraft] Crimped connectors
don't agree but this is what works best for me. To me the APP's are a pain
to assemble and they are not reliable because they come apart too easy even
though they snap together properly. I had to get these remarks in before
Eric pulls the plug which should be any day now.
John[K7SVV
others had to have every flat cable replaced. Each machine had a LOT of
cables, I can't even guess how many. It took teams of 5 people working
around the clock 2 days to recable a Model 50. Them were the good old days.
The Model 50 made me a lot of money over the years. 73
John[K7SVV
It sounds like the natives are getting restless again.
John[K7SVV]
- Original Message -
From: JIM DAVIS [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Tuesday, May 20, 2008 3:06 PM
Subject: [Elecraft] Elecraft Honchos!!!
I'm very interested in purchasing one of your NEW
sure like to
see that feature added to the K3 along with a menu item that would be used
to turn ACS on and off. As a matter of fact I would like to see the same
thing in the K1 and K2 too.
John[K7SVV]
___
Elecraft mailing list
Post to: Elecraft
I now want the upgraded 2.8 8 pole SSB filter for the additional $41 !
Interesting. Where did you come across the $41 price? I am replacing the
2.7K with the 2.8K but they are charging me the full $120 for the 2.8K but
they are giving me a $30 rebate for removing the 2.7K.
John
Simon,
Thank you for letting us hear your rig. I was pleased with what I
heard but I did hear a slight click when the filters were switched which was
distracting. I uninstalled McAfee from my M1330 and it is much faster now.
Thank you. Still waiting for my K3. 73
John [K7SVV
I should have mine tomorrow and I will let you know the s/n as soon as it
arrives. It is currently on the road between Las Angeles and Phoenix.
John [K7SVV]
- Original Message -
From: DOUGLAS ZWIEBEL [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, December 10, 2007 6
Hi Everyone,
s/n 148 arrived here in Tucson a few minutes ago (12/11/07). It was
ordered on May 2 on invoice #47490.
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
configuration
with a resistor between pins 1 and 6.
John [K7SVV]
- Original Message -
From: Barry Simpson [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, December 14, 2007 6:23 PM
Subject: [Elecraft] Microphones
Is it possible to use an ICOM SM20 with the K3 ?
Looking
Scott,
Congratulations on the current K1. I too enjoy building Elecraft
Kits (1 K1, 2 K2's, 2 KX1's and now a K3)
John [K7SVV]
- Original Message -
From: B. Scott Andersen [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Wednesday, December 19, 2007 11:35 AM
Subject
Ross,
Did you ask the same question on the Flex forum?
John[K7SVV]
- Original Message -
From: Ross Stenberg [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Saturday, December 22, 2007 11:11 AM
Subject: [Elecraft] K3 or SDR-5000?
I realize that this is like asking
Why buy a new xtal when you can get a Softrock 40 with the correct xtal for
only $11.00?
http://www.softrockradio.org/node/49
John[K7SVV]
- Original Message -
From: Dave Martin [EMAIL PROTECTED]
To: George Cortez Jr [EMAIL PROTECTED]
Cc: Elecraft@mailman.qth.net
Sent: Sunday
And I thought that it meant Lord Save Me From Truman but that was a long
time ago.
John[K7SVV]
- Original Message -
From: Larry K1UO [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, December 29, 2007 11:48 AM
Subject: Re: [Elecraft] K3 operating tip: RTTY operation
Oh yeah, I remember the DX-100 article. Boy, was I ever impressed with his
work.
John[K7SVV]
- Original Message -
From: Ken Kopp [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, December 30, 2007 11:35 AM
Subject: [Elecraft] About the DZ kit
DZKit About Us
To: Ken
the
manual XMIT mode but I find it distracting when I do.
John[K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
I should have mentioned that this happens in CW mode and not SSB mode.
John[K7SVV]
- Original Message -
From: John [K7SVV] [EMAIL PROTECTED]
To: Elecraft Mail List elecraft@mailman.qth.net
Sent: Friday, January 11, 2008 1:41 PM
Subject: [Elecraft] K3: CW delay is used when exiting
You've got a point there. My 756Pro would get me from one place to another
real quick if I turned the knob faster. It had a drawback or two but I do
prefer it over constantly pressing those buttons on the K3. Hey Wayne, can
this go on the things-to-do list too?
John[K7SVV
through the bands. At
one point I had 3 80m bands and no 60m and 40m when I cycled through the
bands. Until Wayne gets it fixed, be careful to not have different bands in
VFO A and B.
John[K7SVV]
- Original Message -
From: Ed K1EP [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent
signal on the
AM broadcast band. I would expect each of these signals to much louder when
the AGC is switched off but I hear no change at all. Strange, it is like
the AGC is not being turned off. How about the rest of you fellows, what do
you hear?
John[K7SVV
entry, press FREQ ENT, using the keypad enter a 40m frequency, press
the AFX/ENTER button, and the press AB. Your band sequence should now be
correct). No big deal repairing the damage.
John[K7SVV]
- Original Message -
From: John [K7SVV] [EMAIL PROTECTED]
To: [EMAIL PROTECTED
I think some of you have taught Wayne a lesson. It is a lot less painful to
keep them in the dark than it is to keep them informed. Damned if you do
and damned if you don't.
John[K7SVV]
- Original Message -
From: Steve Sacco NN4X [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Don,
Thank you for the really neato URL.
John[K7SVV]
G4WPW has compiled a lot of good information about many, many
microphones which can be found at http://www.qsl.net/g4wpw/date.html, or
use
___
Elecraft mailing list
Post to: Elecraft
to it did not have any
affect on its performance but we will never know. I hope you will like your
#149 as much as I like my #148.
John[K7SVV]
- Original Message -
From: Charlie, W0YG [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Monday, February 18, 2008 3:08 PM
Subject: [Elecraft
attached to 8'
ground rods. My only problem is choosing the spdt relays. May I ask what
type and brand of relays are you using?
John [K7SVV]
- Original Message -
From: Don Wilhelm [EMAIL PROTECTED]
To: eKotz [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent
I would like to rewire an old IC-SM6 desk mic so that I can use it on my K2
and K3. The K2 is currently jumpered for the MD2 so I don't want to change
the jumpers. So would any of you fine people out there have a schematic
that you could scan for me?
John [K7SVV
I have stayed quiet until now but I now I need to ask a question. How is
Elecraft handling the unpaid balance from those of us that paid the 50% down
payment? Has anyone paid theirs yet?
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft
My vote would go to the portapaddle key with the base at
http://americanmorse.com/portapaddle.htm. I have one and I love it. I also
have a Brass Racer, BY-1, and a K8RA and I love them too but the portapaddle
is dear to my heart.
John [K7SVV]
- Original Message -
From: Rob Lundahl
Did any of you see the ARRL bulletin about Motorola buying Vertex? It has
been a long time since I have seen a U.S. company buying a foreign company.
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Good grief! You people over there must really love Elecrafts.
John [K7SVV]
- Original Message -
From: David Ferrington, M0XDF [EMAIL PROTECTED]
To: Bryan [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Tuesday, November 06, 2007 4:07 AM
Subject: Re: [Elecraft]K3 missing serial
filter. They
said they would email a copy of my invoice so that I would be certain what
was included in my original order and I haven't seen or heard from them
since then. The Flex 5000 is looking better all the time.
John [K7SVV]
- Original Message -
From: [EMAIL PROTECTED
I am not familiar with any of these programs but I just can't imagine them
being as good as Ham Radio Deluxe. Before spending any money, first try
HRD. You will love it and it is free.
http://hrd.ham-radio.ch/downloads/downloads.htm
John [K7SVV]
- Original Message -
From: Art
Dave,
Buy a ticket to Switzerland and go play with Simon's.
John [K7SVV]
P.S. It was nice seeing you at the office last night.
P.P.S. The KX1 arrived today.
- Original Message -
From: David Yarnes [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, November 13
Barry,
Would you let us know how it fits after you get your K3?
John [K7SVV]
- Original Message -
From: Barry McWilliams [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, November 15, 2007 2:42 PM
Subject: [Elecraft] K3 Covers
I just received a K3 cover I
Hi Simon,
Thank you for the beautiful images. Did you name one your of your
dogs K9?
John [K7SVV]
- Original Message -
From: Simon Brown (HB9DRV) [EMAIL PROTECTED]
To: 'Elecraft' elecraft@mailman.qth.net
Sent: Saturday, November 17, 2007 9:41 AM
Subject: Re: [Elecraft] K3
to ship.
John [K7SVV]
- Original Message -
From: [EMAIL PROTECTED]
To: Elecraft@mailman.qth.net
Sent: Thursday, November 22, 2007 3:54 AM
Subject: Re: [Elecraft] 100 K3's shipped
Guys ( Gals),
My K3 will ship Monday, it was ordered 4th of May
and it looks
I'll second the TH-F6a. It's a great HT but so is the VX-2 except for that
darn PTT button. Hard as the dickens to push.
John [K7SVV]
- Original Message -
From: Leigh L Klotz, Jr. [EMAIL PROTECTED]
To: Fred (FL) [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Saturday, June 09
.
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Your Application Note is great. Even I can understand it. Thank you.
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
When I built my second K2, I had the same experience as Tom. The adhesive
came off when I peeled off the paper. Scott sent me a couple more pads but
they behaved the same way so I put a drop of rubber cement on them and glued
them on.
John [K7SVV]
I found that (for both pads) I'd managed
I find it VERY difficult to judge the quality of my signal on another local
receiver. Rely on what others say rather than on what your ears hear.
John [K7SVV]
- Original Message -
From: Chris Kantarjiev [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Tuesday, May 29, 2007 3:29
You will find us Elecraft owners to be a pretty close nit group. Welcome.
John [K7SVV]
- Original Message -
From: Don Rasmussen [EMAIL PROTECTED]
To: Elecraft List elecraft@mailman.qth.net
Sent: Tuesday, May 29, 2007 6:12 PM
Subject: [Elecraft] K3 - Annoying (followup)
Hey guys
and then
execute a CALL to address 0004 and away you went. PCDOS 2.0 change all of
that.
John [K7SVV]
- Original Message -
From: Brian Lloyd [EMAIL PROTECTED]
To: Fred (FL) [EMAIL PROTECTED]
Cc: elecraft@mailman.qth.net
Sent: Sunday, June 03, 2007 10:44 AM
Subject: Re: [Elecraft] Spilling
A couple of nice changes to the iron from Circuit Specialists is the
addition of a power-on light and they moved the on/off switch to the front.
I have the Hakko and find it a pain to have the switch on the side.
John [K7SVV]
- Original Message -
From: Bill Tippett [EMAIL PROTECTED
Deni,
If you should end up with a Hakko 936, be sure to check out the
Power/On LED modification at
http://www.n0ss.net/hakko_936_on-off_led_mod_v3.pdf. It is a simple mod
that is well worth your time.
John [K7SVV]
- Original Message -
From: Deni, F5VJC [EMAIL PROTECTED
mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
John
Elecraft web page: http://www.elecraft.com
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
Bob, AA7EQ, has asked me to post this message for him. He can be contacted
at [EMAIL PROTECTED]
--
FS KX1 with 30M, tuner, paddles, and lithium AAs--$375 delivered to
your front door in the lower 48. In as new condition and works
Has anyone located the QST article yet. I thumbed through all of the 2005
QST's that I could locate without any luck.
John [K7SVV]
On 12/17/05, Gil Stacy [EMAIL PROTECTED] wrote:
There was an article in one of this year's QSTs describing how to make
tweezers out of copperclad board
@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
John [K7SVV
://www.action-electronics.com/desolder.htm#Heated. Take a look. If
your needs are limited such as mine, you will be very happy with it.
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
the
AGC's effect? The current AGC setting has little or no effect on the noise
when, with an antenna connected and no signal, I turn the AGC off and on but
it has a large effect on moderate and strong signals.
--
John [K7SVV]
___
Elecraft mailing list
. Built by me. Will sell
for $700.00 via US Mail Money Order and I pay
UPS shipping. Please respond off list.
John [K7SVV]
J.W.MCCLAIN at GMAIL dot COM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
FOR SALE KX1 with
KXAT1 Internal Antenna Tuner
KXB30 30 Meter Adaptor
Padded carrying case with belt loop
Asking $335.00 and I pay shipping.
US Postal Money Order or PayPal only.
US only.
--
John [K7SVV]
___
Elecraft mailing list
Post
The KX1 I advertised a while ago has been sold.
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
936 when I am working with surface mount devices. I will be using the
WTCP next week when the K2 I ordered this morning arrives. I just can't be
without a K2.
John [K7SVV]
On 4/15/06, Jeremiah McCarthy [EMAIL PROTECTED] wrote:
Once again I read about having to change the tip in the Weller
board. It mentions that the earlier version of the documentation had
you connect the Tuning Indicator's power lead to the wrong side of the
KX-1's on/off switch.
John [K7SVV]
On 4/16/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
While making some baseline measurements on my KX1
Go for the FT-100 knob. Some think it is too small but I love it. I
removed mine before selling the K2 and saved it for my next K2.
John [K7SVV]
On 4/17/06, Darwin, Keith [EMAIL PROTECTED] wrote:
I'm familiar with a few options to make the K2 nicer by changing the VFO
knob (FT-100 knob
. The instructions say that I
can adjust the range up and down by tweaking L30 but it has no affect on any
band except 80M. The frequency at TP1 is 6828.xx and it does not change
when the VFO knob is changed. CAL PLL results in an INFO 232 message. Does
anyone have any idea where I should start?
--
John
tables).
John [K7SVV]
On 4/30/06, Don Wilhelm [EMAIL PROTECTED] wrote:
Carel,
You8 did not specify, so I must ask -- did you alos do CAL FIL before you
checked the result. It is necessary that you do both CAL PLL and CAL FIL
(for each BFO) after adjusting the refcerence oscillator.
73,
Don
Don,
Well, I'll be a monkey's uncle. You hit it right on the head. C73 is
a marked as a 471. Thank you!
John [K7SVV]
On 4/30/06, Don Wilhelm [EMAIL PROTECTED] wrote:
John,
All bands look OK except 40, 30 and 15 meters. So the PLL is working, and
the VCO is working.
That would
on the
heatsink or do I remove it?
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
to death that there will be an announcement at Dayton that will replace the
K2 but, what the heck, I'll get one of those too. 73
--
John [K7SVV]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
76 matches
Mail list logo
