Re: [Elecraft] K3+KPA500+Steppir or K3+Expert KFA+ Steppir ?

Yes the SteppIR will follow the radio. I don't have a KPA500 so cannot answer that one. 73, Mike NF4L On Nov 22, 2014, at 5:58 AM, Anton Koval, MW0EDX via Elecraft elecraft@mailman.qth.net wrote: GM/GA/GE, The K3 question in connection with Steppir yagi(s). Will Steppir yagi follow K3

Re: [Elecraft] The Mighty KX3+KXPA100 Into a Hi-Power Linear

Well, the K3 IS a very sensitive rig. 73, Mike NF4L On Nov 24, 2014, at 3:37 AM, Eric Norris norrislawfi...@gmail.com wrote: I have run KX3-KXPA100-KPA500-KAT500 and it was seamless QSK on CW. A beautiful thing to behold--until I saw what looked like a tear forming on the lower right

Re: [Elecraft] Is the KX3 a good choice for a new General?

I tend to try to save a few bux by buying used older gear. My XYL always tells me that's false economy because at some point I'll want newer/better and won't get much out of the dented scratched boat-anchors. She's SO wise. 73, Mike NF4L On Dec 6, 2014, at 10:08 AM, Al Gulseth

Re: [Elecraft] P3 Ubdate

If that is Toyota's business model, the yes, of course. It is Elecraft's model, so it's not unreasonable to expect it. It was a big part of my buying decision. 73, Mike NF4L On Dec 7, 2014, at 9:04 AM, W2BLC w2...@nycap.rr.com wrote: I have a three year old Toyota RAV - it is a reasonably

Re: [Elecraft] PR6 Preamp - control connection

Joe - My ACCY plug (which I'm almost sure came from Elecraft) has two Phillips head screws on one side for taking the shell apart. They're black, and easily overlooked. GL 73, Mike NF4L On Dec 26, 2014, at 8:34 PM, Joseph Carter j...@case.edu wrote: My wonderful XYL gave me the PR6 for

[Elecraft] K3 - Err BPF2

When I power up the K3, it shows ERR BPF2. Pushing any button causes the message to go away. The manual says to *De Install the KBPF3. I don't want to get rid of my KBPF3. What does the asterisk refer to? 73, Mike NF4L __ Elecraft

Re: [Elecraft] K3 - Err BPF2

Nobody knows the cure for ERR BPF2? Mike NF4L On Dec 29, 2014, at 3:57 PM, Mike Reublin NF4L n...@comcast.net wrote: When I power up the K3, it shows ERR BPF2. Pushing any button causes the message to go away. The manual says to *De Install the KBPF3. I don't want to get rid of my

Re: [Elecraft] K3 - Err BPF2

OK, so how about ERR BP2? Mike On Dec 30, 2014, at 10:38 AM, Mike Reublin NF4L n...@comcast.net wrote: Nobody knows the cure for ERR BPF2? Mike NF4L On Dec 29, 2014, at 3:57 PM, Mike Reublin NF4L n...@comcast.net wrote: When I power up the K3, it shows ERR BPF2. Pushing any button

Re: [Elecraft] K3 front panel encoders

It cost $63.34 to ship my K3 from Florida to California and $56.00 to ship it back. UPS + insurance. 73, Mike NF4L On Jan 1, 2015, at 7:44 AM, Poul Erik Karlshøj (PKA) p...@telepost.gl wrote: For a Danish ham warranty repair shipping would be repair in Italy 5kg parcel (K3) 2*46 = 92 USD

[Elecraft] K3 Odd behavior

This morning I noticed something strange with #3539. On 80 160, tune only put out 10W. The level is set for 44W. Full output is 44W, power set to 100W. SWR with the AT in bypass is 1.3 on 80M, 1.2 on 160M. All this on ANT1. Power out on 40M up is as expected. I connected a dummy load to

Re: [Elecraft] K3 Odd behavior

I did a poor job on describing the noise level jump. If I switch to ANT2, the 2nd rec. level goes WAAAY up. 73, Mike NF4L On Feb 2, 2015, at 7:38 AM, Mike Reublin NF4L n...@comcast.net wrote: This morning I noticed something strange with #3539. On 80 160, tune only put out 10W. The level

Re: [Elecraft] K3 Odd behavior

A TX cal seems to have taken care of the power issue. Mike NF4L On Feb 2, 2015, at 8:09 AM, Mike Reublin NF4L n...@comcast.net wrote: I did a poor job on describing the noise level jump. If I switch to ANT2, the 2nd rec. level goes WAAAY up. 73, Mike NF4L On Feb 2, 2015, at 7:38 AM

Re: [Elecraft] K3 Keyer to use with Tascam interface

I asked a long time ago for separating SSB VOX from everything else. I found a workaround for my needs, but I;d still like it. It's supposedly on the list. 73, Mike NF4L On Jan 20, 2015, at 1:36 PM, Brian Hunt huntin...@coastside.net wrote: Further the VOX GAIN setting is the same for DATA

[Elecraft] WSJT-X

For those of you with a Mac, there is now a working version of WSJT-X, thanks to John G4KLA and some unknown behind-the-scenes elves. Their dedication and determination to resolve the problems is... well..Elecraft like!

Re: [Elecraft] A way to show both SPLIT and NON-SPLIT warnings

. I'm not going to stop vigorously supporting Elecraft. On Feb 18, 2015, at 11:26 AM, Wayne Burdick n...@elecraft.com wrote: On Feb 18, 2015, at 8:18 AM, Mike Reublin NF4L n...@comcast.net wrote: If it's an option, OK, but I am convinced that if an op misses the existing two indicators

Re: [Elecraft] While talking Split, Why do you have to turn Off to Change Modes.

YES! Now that's something to work on 73, Mike NF4L On Feb 18, 2015, at 2:35 PM, Doug Welborn k...@sc.rr.com wrote: Why is it necessary to have split off when changing modes to digital from CW/SSB or in digital going to CW or SSB? I guess there is some reason for this, but it is

Re: [Elecraft] Sharing a KX3 to multiple application on Mac OS 10.10

I'm curious. Why? 73, Mike NF4L On Feb 16, 2015, at 10:48 AM, Joshua Gould jg.k8...@gmail.com wrote: Any one know of a way to do it? I would like to be able to share the serial port among at least the KX3 utility and RUMLog (Which after reading the manual I have a much better

Re: [Elecraft] K3 Beta 5r10 and LINK

I really do. 73, Mike NF4L On Feb 15, 2015, at 9:55 AM, brian als...@nc.rr.com wrote: Question: does anybody really use XFIL? Perhaps relocation of diversity there makes more sense. 73 de Brian/K3KO On 2/15/2015 14:48 PM, Arie Kleingeld PA3A wrote: Wayne, Please do not take out

[Elecraft] [K3]Split

Someone made what I thought was a really good suggestion. I think it got lost in the noise. I wish I could remember who made it. Fix not being able to change modes while in split. How about it Wayne? 73, Mike NF4L __ Elecraft mailing

Re: [Elecraft] A way to show both SPLIT and NON-SPLIT warnings

If it's an option, OK, but I am convinced that if an op misses the existing two indicators on the LCD display, and the Δf yellow LED, then more indicators aren't gonna help. And I am unanimous in my opinion. I'd much rather see the effort go into separating VOX for data from VOX for SSB. 73,

Re: [Elecraft] Split operation - display of Transmit frequency on keydown

G! No! If someone, looking at the display, doesn't notice the SPLT, or the down arrow, then I don't think another indicator is gonna do any good. I think the problem lies in NOT looking at the radio in the passion of the chase. If the radio is in split, and the VFO's are equal, then

Re: [Elecraft] mcu verification failed

Don - There are instructions in the K3Utility help file.Make sure you have the latest version. 73, Mike NF4L On Jan 29, 2015, at 9:34 AM, haircut...@verizon.net wrote: Hello Folks, trying to load software to my K3. port ok and downloaded latest version. but keep getting a message that

Re: [Elecraft] [K3] WSJT-X settings for K3

Yep. There is a known K2/K3 problem. They're working on a solution. The program uses HamLib to interface with the radio and it apparently is the problem. I can't imagine what the problem is, and they won't tell me. The K3 (and I suspect all the Elecraft line) has a very straightforward

Re: [Elecraft] Upgraded K3 synthesizer module now available: The KSYN3A

Barry - From Wayne's post... See feature list below. Ordering and installation instructions can be found here: http://www.elecraft.com/order_form_parts.htm#K3%20Parts 773, Mike NF4L On Feb 13, 2015, at 7:52 AM, Barry w...@comcast.net wrote: Wat is involved, technically in performing the

Re: [Elecraft] KSYN3A - installation question

I tried the cat method. He objected to the ground probe. When my arms heal, I'll try with a clip lead. 73, Mike NF4L On Feb 15, 2015, at 6:04 PM, Walter Underwood wun...@wunderwood.org wrote: With no cat, I would recommend Sleater-Kinney. wunder K6WRU CM87wj

Re: [Elecraft] Subject: Re: Clock chip

I'm still puzzled as to why there's a clock at all. Everything I do that requires time is picked up from the computer. 73, Mike NF4L On Feb 15, 2015, at 6:28 PM, Rick WA6NHC happymooseph...@gmail.com wrote: I don't care about seeing the clock and also reset it when I think of it. All

Re: [Elecraft] K3 DATA A vs USB for JT65/JT9

Per page 31 of the K3 owners manual sez DATA A can be used for all audio-shift transmission modes, including AFSK and PSK-31. VFO A shows the transmit suppressed carrier frequency and USB is normal for DATA A. Compression is automatically set to 0 to reduce transmitted signal distortion.

Re: [Elecraft] Where do Old Synths Go?

Ted - unless Tech Mode is łON˛ in Config. Since it is recommended that Tech Md be normally off When I first discovered TechMode, I turned it on and it's been on for years now. Who recommended it be off and why? 73, Mike NF4L __

[Elecraft] K3 antenna bleed thru

I was helping a friend with his remote setup. We were on 20M CW, and I copied him about an S5. He couldn't hear me at all (both 100W). Later I realized I was on ANT 2. Why was I able to hear him so well? Do I have a problem? 73, Mike NF4L

Re: [Elecraft] K3 antenna bleed thru

There is nothing connected to ANT 2. On Mar 13, 2015, at 09:17, Mike Reublin NF4L n...@comcast.net wrote: I was helping a friend with his remote setup. We were on 20M CW, and I copied him about an S5. He couldn't hear me at all (both 100W). Later I realized I was on ANT 2. Why was I

Re: [Elecraft] K3 TX Gain failure

The 5W TX cal fails also, but no error message on the K3. On Mar 24, 2015, at 11:41, Mike Reublin NF4L n...@comcast.net wrote: I just loaded 5.14 firmware, and ran the 50W TX gain calibration. It fails, the K3 displays ERR TXG. The book says band-pass or low-pass filters out of whack

[Elecraft] K3 TX Gain failure

I just loaded 5.14 firmware, and ran the 50W TX gain calibration. It fails, the K3 displays ERR TXG. The book says band-pass or low-pass filters out of whack. What's my remedy? 73, Mike NF4L __ Elecraft mailing list Home:

Re: [Elecraft] Fw: Don't have a 50W dummy load

That will cause the owl to blink, thus losing orientation to True North. Mike NF4L On Mar 25, 2015, at 14:25, Bob Gibson via Elecraft elecraft@mailman.qth.net wrote: HOW ABOUT A LAMP WITH 100 WATT BLUB, THATS ALL US OLD GUYS HAD! 73s Bob W5RG

Re: [Elecraft] Nifty Ham Accessories Plus Opt booklet

I bought the CD and went to Orifice Depot and had it printed, spiral bound. If you get the CD, you can load the .pdf and search it. 73, Mike NF4L On Mar 2, 2015, at 15:44, Fred Jensen k6...@foothill.net wrote: I have Fred's K3 book which also includes information on the P3. I bought the

Re: [Elecraft] [Bulk] A way to show both SPLIT and NON-SPLIT warnings

I agree Bill, it's a real nuisance. Maybe Wayne can tack this onto his main bill as a rider. It's a real life, almost-every-day irritant. No amount of additional split warning will help, it's still too many button pushes, and inconsistent behavior by mode. 73, Mike NF4L On Mar 3, 2015, at

[Elecraft] K3/0 Mini remote

I have a friend (a new Elecrafter) who has a K3/0 Mini, and is connected to the RemoteHamRadio service. How is the connection to his logging program done? A USB to serial cable to the COM1 connector on the RemoteRig box doesn't do it. 73, Mike NF4L

[Elecraft] K3 logging, digital software

My favorite logger (for Mac) has a new version, RUMLogNG. It has a control screen for the K3/KX3 and one for the P3/PX3. Tom DL2RUM is still working on it, but it's very nice. It uses Fldigi for digital modes, and transfers data using an Applescript. With a lot of help, I put together a web

Re: [Elecraft] K3 and FLDigi

in the archives. DavidK0LUM On Feb 24, 2015, at 12:09 PM, Mike Reublin NF4L n...@comcast.net wrote: I've been using CocoaModem, but since Chen isn't supporting it anymore, I feel the need to move on. I'm trying to get fldigi working, hopefully with RUMLogNG. It decodes CW

Re: [Elecraft] K3 and FLDigi

under the frequency display. Set that and it changes the mode on the K3, so I choose RTTY. The DATA sub-mode on the K3 is AFSK A. Any further info welcome! 73, Mike NF4L On Feb 24, 2015, at 13:09, Mike Reublin NF4L n...@comcast.net wrote: I've been using CocoaModem, but since Chen isn't

[Elecraft] RemoteRig

I'm trying to help a friend get his new K3/0 mini and RR box connected. He's using Win8 and Xfinity. The RR box isn't talking to the Xfinity modem/router. The LED on the RR box is solid green, the LED on the modem is blinking amber. Looking in the modem settings, the RR box doesn't show up in

[Elecraft] K3 and FLDigi

I've been using CocoaModem, but since Chen isn't supporting it anymore, I feel the need to move on. I'm trying to get fldigi working, hopefully with RUMLogNG. It decodes CW but not RTTY, and doesn't transmit either. I suspect off-line would be best. 73, Mike NF4L

Re: [Elecraft] K3 SYNTH

Fred http://www.elecraft.com/order_form_parts.htm#K3%20Parts 73, Mike NF4L On Feb 24, 2015, at 1:28 PM, Fred Jensen k6...@foothill.net wrote: Can someone point me to the new K3 synthesizer option on the order page on the web site? I can't find it. 73, Fred K6DGW - Northern

Re: [Elecraft] K3: Sherwood Receiver Test Data question

I seem to remember an Intel processor where they were 73, Mike NF4L On Mar 8, 2015, at 12:56, David Gilbert xda...@cis-broadband.com wrote: Because numbers are so subjective? On 3/8/2015 6:23 AM, Barry wrote: All this talk about better numbers is great, but has anyone done a side

Re: [Elecraft] KSYN3A

problem. 73 Arie PA3A Mike Reublin NF4L schreef op 3-5-2015 om 20:03: What could I expect to actually hear differently (not lab measurements) after the installation of the new synths? I have no interest in freqs below 1.8MHz, I'm not a high-speed CW guy. I chase DX (SSB, CW, RTTY

Re: [Elecraft] Introduction

Ken - I agree that you'll most likely relegate the Eagle to second status. If you hook the K3 up to the Centurion, be sure to follow the instructions for the K3. It's different. Fred Cady's (KE7X) book on the K3 is well worth having also. I bought it on CD so I can search it, and I took the

[Elecraft] K3 no power

My K3 puts out no power in any mode, either on the SteppIR or into a dummy load. It's not in test or split. TX INH is off. Holding tune results in the LCD displaying 0 W, and the VFO A area changes to 2 dashes on the right, no digits. Tune power is set to 50W, Power to 100W. A 50W TX Gain

Re: [Elecraft] 'tude

Yes! And the two fingers I use are fully extended thumb and pinky. 73, Mike NF4L On May 20, 2015, at 1:53 PM, GRANT YOUNGMAN n...@tx.rr.com wrote: On May 20, 2015, at 12:46 PM, Mike Reublin NF4L n...@comcast.net wrote: Is it just me, or has it been a tad testy here since

Re: [Elecraft] KXV3B install - no problems

Not a lot of info.. http://www.elecraft.com/elecraft_prod_list.htm#k3 73, Mike NF4L On Jun 20, 2015, at 9:11 AM, Mike Sanders k...@centurytel.net wrote: So where does one find the KXV3B info/pricing etc. on the Elecraft web site? I have looked by no luck so far. 73, Mike

Re: [Elecraft] K3S config file

I'm confused. I was with Harlan, that a config file from another serial number wouldn't load. Has something changed with the K3S? How about K3 to K3? 73, Mike NF4L On Jun 21, 2015, at 2:56 PM, Wayne Burdick n...@elecraft.com wrote: Yes. However, on restore of the configuration file to the

Re: [Elecraft] SMT handling tip

The dab of beeswax on a toothpick that someone else posted looked good to me. 73, Mike NF4L On Jun 26, 2015, at 11:48 AM, George via Elecraft elecraft@mailman.qth.net wrote: Wow, are they available anywhere in the USA? 72 George/W2BPI -- View this message in context:

Re: [Elecraft] K3S config file

Over On Jun 22, 2015, at 3:01 PM, Mike Reublin NF4L n...@comcast.net wrote: I'm confused. I was with Harlan, that a config file from another serial number wouldn't load. Has something changed with the K3S? How about K3 to K3? 73, Mike NF4L On Jun 21, 2015, at 2:56 PM, Wayne

Re: [Elecraft] K3S config file

, 2015, at 4:31 PM, Mike Reublin NF4L n...@comcast.net wrote: I found this on Nabble. Wayne? No. Some of what is saved is rig-specific VCO calibration data Dick, K6KR 73, Mike NF4L On Jun 22, 2015, at 3:01 PM, Mike Reublin NF4L n...@comcast.net wrote: I'm confused. I

Re: [Elecraft] K3S config file

I found this on Nabble. Wayne? No. Some of what is saved is rig-specific VCO calibration data Dick, K6KR 73, Mike NF4L On Jun 22, 2015, at 3:01 PM, Mike Reublin NF4L n...@comcast.net wrote: I'm confused. I was with Harlan, that a config file from another serial number wouldn't load

[Elecraft] KRC2

My Ameritron RCS-12 automagic antenna switch is sulking, and not switching the remote RCS-10. I'm thinking of replacing it with a KRC2 pre-built. Is anyone using it with a K3 and the Ameritron remote box? How difficult to configure it to work from the K3 ACC with the RCS-10? The manual has

Re: [Elecraft] KRC2

, or other things. It really is pretty simple. The large majority of users don’t even need to use the KRC2 utility to remap the output pins. Just hook things up and operate. 73! - Jack B, W6FB On Jun 11, 2015, at 10:41 AM, Mike Reublin NF4L n...@comcast.net mailto:n...@comcast.net

Re: [Elecraft] KRC2

. If you happen to have the KRC2ACC hardware, you can negate the changes for the announciator functions by loading the non-ACC version of the KRC2 firmware and it will function as the standard one. 73, Don W3FPR On 6/11/2015 3:03 PM, Mike Reublin NF4L wrote: Thanks, Jack, sounds doable

Re: [Elecraft] PX3 and KX3 tuning noise

On my K3/P3, I get a rise when the cursor crosses a screen boundary. Lasts a second or so. 73, Mike NF4L On Jun 16, 2015, at 11:54 AM, GDR k...@charter.net wrote: While tuning the KX3 I've noticed the noise floor jump up on the PX3. Seems to do it on all bands. Is this normal? Anyone have

Re: [Elecraft] Microphone Qusestion

The K3S has so much audio tailoring built in, pretty much any mic, when properly set up, will garner good audio reports. There's no need to spend cubic dollars on microphones. 73, Mike NF4L On Jul 5, 2015, at 7:59 AM, Bob McGraw - K4TAX rmcg...@blomand.net wrote: New to the Reflector and

Re: [Elecraft] K3 VOX by mode only?

Been chasing the same enhancement for a long time. I don't think it's gonna happen. The workaround is that fldigi and Cocoamodem can key the rig. Dunno about Win programs. 73, Mike NF4L On Aug 2, 2015, at 2:41 PM, Dan Atchison via Elecraft elecraft@mailman.qth.net wrote: I'd like to use

Re: [Elecraft] Rig Insurance

ARRL affiliated insurance. Wouldn't be without it. 73, Mike NF4L On Aug 7, 2015, at 11:13 AM, ae...@carolinaheli.com ae...@carolinaheli.com wrote: I'm wondering with such a large investment in gear if anyone has special insurance just for their station? I'm pretty OCD about disconnecting

Re: [Elecraft] Grrrrr!

Please be aware that Murphy's Law was NOT written by Murphy, but by another guy with the same name. 73, Mike NF4L > On Nov 7, 2015, at 12:09 PM, Dauer, Edward wrote: > > Is it a necessary corollary of Murphy’s Law that a multi-band Vee that has > been flying just fine for

[Elecraft] Mac & fldigi

Would anyone using a Mac, iMic and fldigi contact me off list? 73, Mike NF4L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] sound card, microphone and k3

Do you have MENU:MIC+Lin ON? 73, Mike NF4L > On Oct 20, 2015, at 4:20 PM, NE9U - Jasper wrote: > > i am trying to get sound card audio to feed my k3 for the ssb contest this > weekend and also use my Heil headset. > > if i feed the line out from the computer to line in of

Re: [Elecraft] MacOSX Logging Software

After trying several Mac logging programs when switching from Windoze, RUMLog is the clear winner for me. Focus on what meets your logging needs, they all support Th K-series as far as control goes. RUMLog ties in well with fldigi for digital modes, has a really good interface to LoTW and

[Elecraft] [P3] Can I?

Span is set at 10. When chasing DX split, is it possible to position the VFO A cursor at the left edge of the display and have the right 5 kHz expanded over the (almost) full screen? In trying to achieve this, I got it so that when in tracking mode the A VFO moves the magenta cursor as well as

Re: [Elecraft] Grounding the Elecraft

I can't think of a transceiver that doesn't have a grounding lug. 73, Mike NF4L > On Nov 18, 2015, at 3:45 PM, Frank wrote: > > I am a firm believer in a good ground for ANY transceiver, but need advice: > Where would be the best location (internal OR external ) to install a

Re: [Elecraft] Mic gain goes to zero using N1MM

Well said! 73, Mike NF4L > On Sep 9, 2015, at 5:32 PM, Guy Olinger K2AV wrote: > > On Wed, Sep 9, 2015 at 11:29 AM, K8TE wrote: >> >> In my case, the Mic gain is normally set to 8-9 (CM500 headset). The >> anomaly decreases the Mic Gain to zero.

Re: [Elecraft] Elecraft SP3 External Speaker details

Not even at half that. Maybe it's a misplaced decimal punkt. . . . . . 73, Mike NF4L > On Sep 14, 2015, at 7:24 PM, mfsj wrote: > > OMG OM cheap at twice the price 8>) > > Fred/N0AZZ __ Elecraft mailing

Re: [Elecraft] K3 - rig control using Linux

Bill - There's always that really good version of Linux that makes it easier. OS X on a Mac. . . . and run RUMLogNG. 73, Mike NF4L > On Sep 11, 2015, at 3:36 PM, Bill wrote: > > I have gotten most everything moved from Windows over to Linux (Mint 17) - > even a very

Re: [Elecraft] Elecraft SP3 External Speaker details

I can't imagine what makes it cost that much. Too rich for my anemic blood. 73, Mike NF4L > On Sep 14, 2015, at 4:24 PM, Cliff Frescura wrote: > > Didn't ask. But the web site lists the SP3 at $179 __ Elecraft

Re: [Elecraft] Station setup

Unless there's a real space issue, forego the wheels ans just put the desk a couple of feet from the wall. KISS 8-{o}. 73, Mike NF4L > On Sep 16, 2015, at 1:15 PM, Jim Brown wrote: > > On Wed,9/16/2015 7:50 AM, Dennis wrote: >> This desk will go in a room

Re: [Elecraft] K3S Build Progress: 1st power-on

Ah yes. The lemming washers. 73, Mike NF4L > On Sep 17, 2015, at 8:42 AM, Rick Robinson wrote: > > Also using a bath towel under your work helps grab those little parts that > amazingly grow legs and wander or jump off.

Re: [Elecraft] Grounding

Jim - The discussions are not a burden at all. I enjoy them immensely, and consider them a valuable resource for my education. Please dont be annoyed. 73, Mike NF4L > On Sep 28, 2015, at 12:37 PM, Jim Brown wrote: > > And this question remains. When I spend MONTHS

Re: [Elecraft] What crystal filter do you use the most?

The filters you guys are discussing are roofing filters. The filtering you're thinking about is done digitally, and is continuously variable. The K3s isn't your Dad's analog rig. Here's an Elecraft article explaining roofing filters. http://www.elecraft.com/K3/Roofing_Filters.htm 73, Mike

Re: [Elecraft] Elecraft K3 Utility problem

Ken - I can duplicate your problem on my Win10 Pro setup. Elecraft support is supp...@elecraft.com. 73, Mike NF4L > On Dec 7, 2015, at 9:05 AM, Kenneth Christiansen wrote: > > Hi to the group > > I was helping a friend get on PSK31 and discovered I have a problem with the >

Re: [Elecraft] Elecraft K3 Utility problem

OK, it's way too early to be at work. 73, Mike NF4L > On Dec 7, 2015, at 10:11 AM, Dick Dievendorff <d...@elecraft.com> wrote: > > I'm looking into it now. > > Dick, K6KR > > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth

Re: [Elecraft] Elecraft K3 Utility problem

it will see wide testing followed by release within a few >> days. >> >> Not to toot our own horn, but outstanding job, sir! >> >> Jack, W6FB >> >> >>> On Dec 7, 2015, at 7:33 AM, Mike Reublin NF4L <n...@comcast.net> wrote: >>> >>&g

Re: [Elecraft] Elecraft website now accessable through FIOS in NY

Eric. 73, Mike NF4L > On Jan 4, 2016, at 4:47 PM, Barry N1EU wrote: > > Yes, but who ever said it was a DNS issue? > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] [K3 powers off]

I got a new K3 feature for Christmas. Today just sitting here with the K3 on, I heard some relay chatter and the rig turned off. I turned it back on, and after about an hour, a repeat performance. I wasn't doing any transmitting. 73, Mike NF4L

Re: [Elecraft] [K3 powers off]

> 73, > > Fred K6DGW > - Northern California Contest Club > - CU in the Cal QSO Party 1-2 Oct 2016 > - www.cqp.org > > On 12/21/2015 10:48 AM, Mike Reublin NF4L wrote: >> I got a new K3 feature for Christmas. Today just sitting here with >> the K3 on, I heard some

Re: [Elecraft] [K3 powers off]

se a three transistor, solar-powered receiver. > > You've been warned that the biggest threat to this country is global > warm...sorry...climate change and you must do your part. So NSA and it's > Chinese partners saw that you were only listening and shut you down. > > &g

Re: [Elecraft] [K3 powers off]

Maybe. 73, Mike NF4L > On Dec 21, 2015, at 9:29 PM, Harry Yingst <hlyin...@yahoo.com> wrote: > > Did the power supply hiccup? > > > > > > From: Don Wilhelm <w3...@embarqmail.com> > To: Mike Reublin NF4L <n...@comcast.net>; Elecraft Li

[Elecraft] [K All]

ear 73, Mike NF4L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

Re: [Elecraft] Microphone/Headset for K3S

the front panel jack for the headphones. Using > it makes it easy to switch to the internal speaker when you want to. (Just > unplug the 1/4 inch adapter.) > > 73 Bill AE6JV > > On 12/18/15 at 1:02 PM, n...@comcast.net (Mike Reublin NF4L) wrote: > >> Hi Juliean - >> >

Re: [Elecraft] Microphone/Headset for K3S

Hi Juliean - Welcome to the hobby. You're starting off with the best. Yes, you can use your computer headset. The K3s has an 8-band equalizer for both receive and transmit, so with a bit of tinkering, you can get excellent sound. My headset came with 1/8 plugs for both mic and phones. I plug

Re: [Elecraft] Crackling in Headphones

Has anyone contacted Elecraft support? This one seems to sorta fall into the same category as the harsh/noisy receiver issue a few years back. AFAIR, that one never was solved officially. 73, Mike NF4L > On Dec 1, 2015, at 9:44 AM, j...@kk9a.com wrote: > > My AGC is on fast and I have also

Re: [Elecraft] [P3] Can I?

11/19/2015 10:17 AM, Mike Reublin NF4L wrote: >> >> So is there a way to have that almost full screen from the A cursor >> on the left edge to the right side of the screen cover 5 KHz? It sure >> would make it easier to find the sweet spot in the pileup. > > In

Re: [Elecraft] [P3] Can I?

equency, it will continue to do so. > > Alan > > > On 11/18/2015 12:36 PM, Mike Reublin NF4L wrote: >> Span is set at 10. When chasing DX split, is it possible to position >> the VFO A cursor at the left edge of the display and have the right 5 >> kHz expanded over the

Re: [Elecraft] [P3] Can I?

ursor is at the far left. It > will stay put as long as you don't move VFO-A on the K3. The VFO-B (magenta) > cursor (and the split red cursor) will move as you tune the VFO-B knob on > the K3. If you also want to use the A and B markers they will follow the > select knob on the P3. > >

Re: [Elecraft] [P3] Can I?

clicking the left portion of the VFO A window puts > the cursor where you want it. > > I have come to really miss that control screen if I happen to be using > another Logging/Control program. > > Rick > K6LE > > On Wed, Nov 18, 2015 at 12:36 PM, Mike Reublin NF4L <

Re: [Elecraft] [P3] Can I?

Over 73, Mike NF4L > On Nov 20, 2015, at 7:35 AM, Mike Reublin NF4L <n...@comcast.net> wrote: > > I'm not doing a a good job of explaining I think. > > The rig is at 3.524. I double-tap the Split button to equalize the VFOs, then > hold Split. > The P3 is s

Re: [Elecraft] [P3] Can I?

> On Nov 21, 2015, at 11:12 PM, Alan wrote: > >> What I'm looking for is that when I tune either the B VFO or the B >> marker up band, it reaches the far right edge of the screen when I >> get to 3.529, instead of reaching 3.529 when it gets just to the >> right of the screen

Re: [Elecraft] Stereo Speaker for K3

I have WMR amplified speakers, and I get really bad sound if the volume is up too far. 73, Mike NF4L > On Nov 23, 2015, at 11:15 AM, Steve Ellington wrote: > > Am I missing something? Why would one want to use an amplified speaker on a > K3 since the radio already has an

Re: [Elecraft] K3 KIO3

ason. > > P-T > LA7NO > > > On 24 November 2015 at 13:54, Mike Reublin NF4L <n...@comcast.net > <mailto:n...@comcast.net>> wrote: > I'm writing a Windows program for the K3. It connects at 38400 only. In > trying to figure out what's wrong, I set my P3 a

[Elecraft] K3 KIO3

I'm writing a Windows program for the K3. It connects at 38400 only. In trying to figure out what's wrong, I set my P3 and K3 to 9600 and used the K3 Utility. It will not connect. If I set the K3 to 38400 and leave the P3 at 9600, the utility connects, but reports it's connected at 9600.

Re: [Elecraft] K3 KIO3

s talking to the K3 at 9600. > Cheers and 73, > Fred KE7X > > For all KE7X Elecraft books see www.ke7x.com > > > From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Per-Tore > Aasestrand <p...@ieee.org> >

Re: [Elecraft] MAC logging software

RUMLogNG has about 75 pre-defined contests. I think RUMPed is sorta deprecated. 73, Mike NF4L > On Jun 8, 2016, at 11:06 PM, Scott Manthe wrote: > > You'll get recommendations for MacLoggerDX, and it is nice software, but it's > also $95. I recommend RUMLog, which does just

Re: [Elecraft] Soldering Station recommendation

I like my Aoyue 937. Amazon has 'em for $59.95. 73, Mike NF4L > On Jun 13, 2016, at 1:00 PM, Eddy Avila wrote: > > Greetings Elecraft afficiados, I'm looking for a recommendation for a > soldering station, my Weller temperature-controled station of 20 years is > dying an

Re: [Elecraft] Headset

Amazon lists the SB-45 at 1/2 the price of the CM500. 73, Mike NF4L > On May 26, 2016, at 12:06 PM, John wrote: > > I use the KOSS SB45, it has the same electret element as in the Yamaha. In > fact > it is almost identical to the Yamaha, but uses silver ear cups. I

Re: [Elecraft] K3 and Signallink next the Microham

Why would you use two interfaces for digital? 73, Mike NF4L > On May 29, 2016, at 6:54 PM, Ross wrote: > > Thanks for all the comments about the signal link. > I found the problem when checking Airlink express, I had the volume and tx > levels set to almost zero, in

  1   2   >