to available club radios with N1MM and network running.
soon to add one for linking a repeater. probably an old dell running
linux.
David Moes
VE3DVY, VE3SD
On 3/11/2015 14:12, Edward R Cole wrote:
Hmm, another survey?
I have had up to four computers in the shack, but run two (mainly). I
Dell
13.8 RX
12.2 TX
voltage at distribution box drops to 13.3 on TX key down CW with 2 ft
10awg PSU to dc distribution box with fuses. 3ft 12AWG to K3still
well within specs and definitly still better IMD that any other rig I
have in the shack I am sure. so no worries here.
David Moes
however because of some license issue with Microsoft if you have
64 bit OS you have to pay for it. for 32 bit OS it is free.
http://www.eterlogic.com/Products.VSPE.html
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 2/18/2015 14:33, Shel Sherman wrote
can go on and on.For me I
feel it was money well spent. I certainly get more use out of it than
I had hoped for.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 1/26/2015 22:57, Mark Tellez wrote:
Hello all,
I would like to know what people think
/eFN20vG.jpg
Flatten off http://i.imgur.com/cpQoPEX.jpg
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 1/23/2015 23:51, Edouard Lafargue wrote:
I tried JT65 for the first time today (there is a first for everything,
right?), and to my surprise, I
Thanks Rich
your advice was perfect
also found the link I was looking for
http://www.n3me.net/pdf%20files/N1MM%20-%20Elecraft%20K3%20Setup%20Notes.pdf
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 1/1/2015 22:02, Richard Ferch wrote:
Re mode
Someone posted some links to setting up MMTTY or MMvari for rtty and
I lost them.
I am struggling with a few problems.
I am using MMTTY with AFSK within N1MM I will build an adapter for
FSK I am hunting some parts now, but for now I will use AFSK and hope
to for the RTTY roundup
I set
everything someting I dont want to have to do every time I start N1MM
Any advice or If anyone has those Links I would appreciate it.
--
David Moes
VE3DVY, VE3SD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
were the actual high, nominal, and low voltages.
just a guess would be the rigs spec High, 13.8, and spec minimum.
Also I wonder if I could get the authors permission to use this in a
presentation at a club meeting.
David Moes
dm...@nexicom.net
VE3DVY, VE3SD
On 12/23/2014 02:24, Jim Brown
12 volts
(transmit) really an issue?
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 12/22/2014 11:31, Jim Brown wrote:
On Mon,12/22/2014 7:05 AM, Greg Troxel wrote:
Jim Brown j...@audiosystemsgroup.com writes:
I run a contesting station with two
but not essential list but for SP in a
contest or hunting DX it has been a wonderfull tool and therefore has
now been upgraded to an essential piece of my station. Any
improvement would be icing on a superb cake, and I love icing!
David Moes
VE3SD
On 12/5/2014 08:45, ANDY NEHAN wrote
I recieved a new la Crosse clock about two months ago In the
instructions it stated that it would only sync a a specific time at
night.And now I know why.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 11/28/2014 18:40, Hisashi T Fujinaka wrote
for comfort.
David Moes
VE3SD
On 11/28/2014 17:28, Jim Lowman wrote:
What are some of you using?
73 de Jim - AD6CW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
There are many internal cards The creative sound blaster Audigy FX
PCIe will do 24 bit / 196 stereo so that will be fine for LP-Pan it
can be had for under $40.I have the PCI version. seems quite both
in and out. works well for digital including JT65
David Moes
President
.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 11/24/2014 11:31, Joe Subich, W4TV wrote:
On 2014-11-24 11:14 AM, Bob NW8L wrote:
Fldigi has a TX level *attenuator* control on the status bar (to the
left of the AFC button) that can be used to trim the TX
and converter is medium
interpolation. and corrections all 0 and
third tab right channel all buttons are clear unchecked.
David Moes
VE3DVY, VE3SD
On 11/22/2014 17:15, James Bennett wrote:
I’ve been using cocoaModem on my iMac for PSK31 QSO’s. Also, I use WSJT-X for
JT65 and JT9. Recently
with other
programs although I cant remember if that setting is linked to the
windows levels or not
I don't believe that WSJT-X has this though.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 11/23/2014 18:06, James Bennett wrote:
John - thanks
the advantage.
David Moes
VE3SD
On 11/17/2014 13:22, David Ahrendts wrote:
Experimented yesterday for a few minutes with ESSB (carefully avoiding weekend
contesters), and it raised a fundamental question: As bandwidth is broadened,
is effective radiated power diluted? In other words, will 500 watts
.with a flashlight and very fine long needle nose pliers I was
able to grab it and pull it out. no damage done.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 11/17/2014 16:56, Oli, DL1OLI wrote:
Hello,
a friend of mine, also a Ham, bought his new K3 some
the others calling I will go
right down to as low as 100 hz even 50hz the K3 will go that narrow
without too much ringing something I have not been able to do with
other radios.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/31/2014 02:02, K6ST
of one channel with perhaps a speaker with a
mono plug? and if so is it something I can fix or do I have to send it
in. (I'm good with a soldering iron)
David Moes
VE3DVY, VE3SD
On 10/26/2014 06:14, Stewart wrote:
Very sad news, a real loss to Amateur Radio.
Operating in CQWW I am
Thanks Lyle that was it.
I feel a whole lot better now. Thats why I like this list so
much To bad I put up with it for the CQWWSSB I do prefer the AFX with
that weird sort of aural effect seems to help me discern voices in a
busy band
David Moes
President: Peterborough Amateur
power on AM and CW than the K3 and it warms the shack in the
winter. Its not all DX and contests sometimes its fun to get out the
old and tinker. next up is 1930 era two tube push pull UX-245 40m
transmitter now were talking chirp!.
David Moes
President: Peterborough Amateur Radio Club
.
David Moes
VE3DVY, VE3SD
On 10/23/2014 20:44, Don Wilhelm wrote:
Re: Heath TX1 power --
The Heath TX1 used a pair of 6146 output tubes, those normally run 180
watts *input* power.
Modern transceivers (K3 included) are rated fort power output.
If one assumes a 67% efficiency (realistic
You say a 1:1 balun.What type is it and should it not be preventing
common mode currents? If not Id consider one that will rather than
adding a choke. I bought a commercial 1:1 Balun opened it up and found
it to be just a length of RG8X looped once inside the casing with half a
dozen
what ever it was in the balun I purchased and took apart so Im not sure.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/21/2014 09:49, Michael Walker wrote:
David
What mix of ferrites are you using?
Mike va3mw
On Tue, Oct 21, 2014 at 8:29 AM
FLdigi with logger32 and both communicate at
the same time just fine even K3 utility will run with it and K3-EZ all
concurrently.32 bit version is free 64 bit you have to pay for
since they have to pay some licence fee to Microsoft for components used
in the 64bit version.
David Moes
one. The other option I looked at
were Tattoo foot switches.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/16/2014 14:18, Guy Olinger K2AV wrote:
QLF?
73, Guy
On Wed, Oct 15, 2014 at 2:18 PM, Fred Jensen k6...@foothill.net wrote:
A J-38
.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/3/2014 05:24, Ken Chandler wrote:
I'll agree with that Ian, set it a 3KHz, then let the user define his own split
offset once split is activated.
Ken.. G0ORH
Sent from my iPad
On 3 Oct 2014, at 09
tempted to use Data-A and tuning with the mouse
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/2/2014 06:32, David Cole wrote:
Why only tune the radio, and not use the Waterfall?
__
Elecraft
.
--
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
dont like tuning with the mouse.
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
On 10/1/2014 22:31, Don Wilhelm wrote:
David,
Actually, MMTTY and data sub-mode AFSK-A on the K3 will give you the
best transmitter IMD. With MMTTY, you would tune
was happening so I wasn't doing
the same thing to others. I didn't add the line feed Ill revisit that
before next contest.
All good advice
Thanks
David Moes
President: Peterborough Amateur Radio Club.
dm...@nexicom.net
VE3DVY, VE3SD
add me into the per mode group.and auto reference level would be cool
--
David Moes
dm...@nexicom.net
VE3DVY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
with MMSSTV's level of capability. adding more comprehensive
RTTY/psk function or perhaps JT65/9 or even a simple logger so I don't
need to drag the the PC when outside the shack would be nice.just
pie in the sky thing there.
--
David Moes
VE3DVY
of a provincial park but have to lug the
K3 I so wish I had something I could toss into the backpack or canoe.
--
David Moes
dm...@nexicom.net
VE3DVY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
David Moes
dm...@nexicom.net
VE3DVY
On 7/2/2013 18:42, Joel Black wrote:
Fred,
Thanks for this, but I still cannot find what I'm looking for.
Sometimes, when I hit ATU, I get a short beep. Sometimes it's a bit
longer (at least 2x if not 3x longer). I cannot find anything on the
length
. or whatever page it was on.
My mistake and it seems you did it correct is I will need to do a
presentation next year.
David Moes
dm...@nexicom.net
VE3DVY
On 6/28/2013 09:01, John Fritze wrote:
I gave my presentation on the Friday prior to Field Day. I had a couple of
questions
Jim:
Wish I had read some of these articles you have many years ago would
have saved a lot of hair on my head.
Thanks!
David Moes
dm...@nexicom.net
VE3DVY
On 6/27/2013 12:28, Jim Brown wrote:
On 6/27/2013 8:33 AM, WM3M wrote:
Could you please give me more info on the pin 1 RFI problem
10 Lbs? Ive used APP for years and I am quite satisfied the whole shack
is done that way. however Ive never had one set strong enough that I
think could dangle the weight of the K3 let alone a full 10lbswhat
am I doing wrong?
David Moes
dm...@nexicom.net
VE3DVY
On 6/24/2013 08:42, Don
is the file available elsewhere? it seems and I have no idea why but I
am no longer a member of the yahoogroup.
David Moes
dm...@nexicom.net
VE3DVY
On 6/14/2013 09:03, John Fritze wrote:
As promised I have uploaded to the Yahoo group (Elecraft K3) the Field Day
guide I made up for the K3
For the fine wires, before crimping I slide a short length about half
to 3/4 inch length of shrink tubing with a diameter just big enough to
fit over the crimped end on each leadthen I slide another piece of
shrink tubing over both wires about 2 inches long and slide it out of
the way for
that Mercedes Benz soldered plenty including pins for the
connectors. I'm sure that is changed in the last 3 decades due to
manufacturing cost.
David Moes
dm...@nexicom.net
VE3DVY
On 5/2/2013 21:42, EricJ wrote:
{Directed at no one in particular. Don't take it personally, anyone}
I think someone
I needed one some time ago for a similar use to dampen a knob on another
rig.I simply raided my XYLs sewing supplies found some felt and a
pair of scissors it wasn't perfect but did the job just fine and
since its hidden behind the knob who cares that I cant cut a perfect
circle.
most
stuff in QEX but I keep reading anyway.
In Canada we have less restrictions regarding the band plans and Digital
Voice is allowed here as well.
David Moes
dm...@nexicom.net
VE3DVY
On 4/5/2013 1:17 PM, Richard Fjeld wrote:
I have thought about this also.
Some data modes use carrier
is it will have many options that you may never use, but it will
be there as your interests change.
David Moes
dm...@nexicom.net
VE3DVY
On 4/4/2013 11:54 AM, Tom Branton wrote:
Good morning everyone,
I am looking for my forever ham rig and have a concern. Most of the questions
and issues
to decode well. nice and quite when you are receiving
no hiss etc. definitely not for DX but fine for rag chew or a round
table where all the signals are strong.
David Moes
dm...@nexicom.net
VE3DVY
On 4/2/2013 8:29 PM, Mike Heitmann wrote:
Hi Eric,
I've used it with my KX3 and used DATA A mode
17m 12m and 30m are not used in contests
David Moes
dm...@nexicom.net
VE3DVY
On 3/21/2013 11:18 AM, Phil Hystad wrote:
Isn't 17 meters left alone during contests? Also, if I remember, 30 meters is
left out too. And, 30 meters is one of my favorite bands.
73, phil, K7PEH
On Mar 21, 2013
to K3 is working. also shut down
LPbridge and try using the port directly with only K3 utilities using
that port. I am not totally familiar with LP bridge so I am not sure
if there is extra configuration if using the P3.
73
David Moes
dm...@nexicom.net
VE3DVY
terminal etc with the K3 Utilities.
On 3/16/2013 08:49, Don Wilhelm wrote:
The K3 and P3 Utility programs should not be run through LP Bridge.
LP-Bridge does not transfer everything used by the Utilities.
73,
Don W3FPR
On 3/16/2013 8:38 AM, david Moes wrote:
You should be able to run one
I had a similar problem some time ago.had me baffled for a while
If your computer is connected to line in and out try disconnecting
them. If the problem disappears then check that the sound card used
for the K3 audio by opening recording devices, then select the device
you are using
Glad to hear it Wayne
I cant say that there is much more I want in a radio that the K3 or the
K line can't offer now. Mind you if there are some cool toys coming
for the K3... well new toys are always fun!
David Moes
dm...@nexicom.net
VE3DVY
On 3/13/2013 9:49 AM, Wayne Burdick wrote
. They
replied thanking me stating that there was already an ongoing
investigation in similar matters. after some of my own investigation
turned out he was in Nigeria.never heard more after that.
David Moes
dm...@nexicom.net
VE3DVY
On 3/11/2013 9:46 PM, Chris Wagner wrote:
Hello Seller
screen over night it disapears and
doesnt seem to come back for another several months so the burn in seems
to not be permanent. on the P3 I doubt this will ever be an issue.
David Moes
dm...@nexicom.net
VE3DVY
On 3/11/2013 6:39 PM, Ralph Parker wrote:
No. The only possible issue
I currently have the 1.8 filter. and it works fine for me. however
don't expect miracles I am not sure it its really all that needed.
If you are in a location that you get a lot of very strong signals in a
contest the filter will help more when adjacent strong signals start
AGC acting
worked the same band as him.This year there will be
no FT101. I wish we could have all K3s
David Moes
dm...@nexicom.net
VE3DVY
On 2/28/2013 10:46 PM, Sam Morgan wrote:
I have a couple of hams living .7miles and 1.3 miles from me.
On my P3 they both appear 6-8+ kc wide when viewed using
73
David Moes
dm...@nexicom.net
VE3DVY
On 3/1/2013 5:16 PM, Benson Wills wrote:
I'm hoping to get my mic wired for the contest tomorrow. I have an XLR mic
(AKG D5) which has:
Pin 1: ground
Pin 2: hot
Pin 3: return
Just got back from RadioShack after waiting in line 15 minutes while the
iPod
Thumb drives are definitely not created equal. other than download
speeds there are other timing issues. the combination of the OS on a
desktop or laptop computer and the firmware on the motherboard seems to
deal with poor quality thumb drives. but just about any dedicated
hardware that
I gave Lp Bridge a try Got it to work fine but its not really what I
am looking for.
I want a totaly hands off option as was the VSPE application.It
started at boot up and sat quietly in the systray.did not need K3 on
to launch didn't have to think about order of launching and
Spent the Big bucks and registered VSPE seems to be the best option
I know it works
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
so I have upgraded into the new age and purchased a fancy new new
computer. with windows7 64 bit.
everything works fine except for one minor problemI was using
eterlogic VSPE so that I can share one port with a bunch of programs
but because of a Microsoft money grab they don't
that were mainly targeting the gamers
with mega fast busses and designed around overclocking etc that
didn't. no mucking around with USB to Serial
Thanks Dave VE3DVY
On 2/17/2013 1:06 PM, david Moes wrote:
so I have upgraded into the new age and purchased a fancy new new
computer
Have a look at Lowepro backpacks. They have a huge selection of padded
backpacks for photo. I have a large one for all my camera gear it
even has a slot for a laptop. its one of the larger padded backpacks
with padded dividers. I can rearrange the padded dividers and fit key,
headset,
I have a rig that has many similarities to the Collins KWM-2. The
KW2000b made by KW Electronics in Great Britain is often compared to the
Collins as it shares many similarities in design.It too has a
mechanical filter and very similar audio amp. Is the best sounding
SSB rig I have
On 1/17/2013 2:32 PM, W4SK wrote:
But are they fun?
Dare I askWill it Blend? http://www.willitblend.com/ok this
should only be tested in a virtual test environment whit no real
Elecraft products, that would be a crime.
Ok seriously nowI am weighing my options for the next
Hmm new projects needing a home. winkeyer lite a Raspberry pi for
running digital modes, and another tied in doing the logging and perhaps
some program to enable added function keys.add a pair of high
quality super small speakers and an amp for audio.oh what else. You
could
Just to take this one even further of topic Ive always been fascinated
by strange sounds and signals on the HF bands in and out of the amateur
bandsI wonder if there is a website that has audio samples with some
sort of explanation of what they are.sometimes there are
descriptions in
Check the continuity from the connector to the paddle tip to the dit
contact on the paddle ring to the dash contact and the sleeve to
ground. in your case I am suspicious that ground may not be made.
On 1/8/2013 10:55 PM, Mark Kopec wrote:
I have been unable to get my new BY-4 paddle
try K6TD and K6TU this is now produced and marketed for Flex radio
http://www.southgatearc.org/news/april2011/flexcontrol.htm
On 1/6/2013 9:06 AM, Bill Clarke wrote:
I did a search for the suggested callsign and the term K3 (as well as
other terms) and found very little information. Seems
just to add my two pennies, I am what I would call a casual CW
contester. I got the 250Hz 8 polenow I often think that was not the
best decidion and should have used the 400Hz filter in rare cases the
250hz pay off in tight situation. Most often the 400hz would have
probably done
Im just wonderingwhat would the advantage be to using ethernet over
serial other than perhaps for remote operation. for me this would be
an nice feature.
I did here a comment today while scanning the bands a wish for an XYL
roofing filter. (-:
On 1/5/2013 1:38 PM, Dr. William J.
Two thoughts.
First for PSK you should be using Data-A This bypasses RX and TX EQ,
any compression settings and also disables the mic.
On the EQ thing.You can set eq settings with a program called K3EZ
I use it with different settings for rag-chew and net and another for
The clock on my K3 loose time quite fast. at least a few seconds a day.
On 12/28/2012 1:50 PM, Jon Stromsland wrote:
This is a subject I have not seen before on the net.
I have noticed that the clock on my K3 loses a few seconds every day. Is this
normal and has anyone else noticed this?
You only hear of the failures here, thats what the forum is about. If
you think of the thousands of K3 and the many upgrades that have been
done on each the failures posted here are a small fraction of a
percentage compared to the successfull upgrades. Those that have
problems get it
Similar function with logger32 works fine on the K3.The mode will
change according to mode definitions in the bands and modes table and
sets mode when I click on a spot. HRD uses a similar setup. Is there
possibly an error in the HRD band layout definitions as set in the
band manager?
I agree that the K3 is an amazing QRP rig. Ran the K3 at 5W on ssb
sweepstakes with great results. Think I had a few non believers that I
was really QRP. No regrets geting the KPA3 for full power but still
enjoy QRP on a regular basis and for this the K3 rocks. I really enjoy
the ability to
The other day as I went to sit down after a short break I too saw a
flickering TX light and thought Oh Oh then while I settled in my
chair my foot tapped the foot switch and it stopped. issue here with
the foot switch.
Since its keying CW do you have a straight key or bug installed? a
Interesting ideaI did that in a speaker mic that I used on an HT
using a speaker element from a dead blackberry. it sounded much better
than the original.My only worry is the original speaker used and its
magnetic shielding may be important.If I replaced it would I be
creating
This is true in many cases. however in many small devices like phones
and such put decent modern drivers in that will sound pretty good
without all the electronic wizardry that the device uses to make it even
better my speaker mic was proof of that.Its amazing how the fine
points of
I use serial cable only as well using RTS DTR for keying from N1mm and
logger 32. originally I had some issues with some messed up keying
using the USB- serial adapter. I discovered that the Mother board did
have RS232 it just wasn't on the back of the computer. I just needed
an
Thankyou!
I spent way to much time the other day searching my hard drives and
sundry thumbdrivers for the installer and never found it. And now
thanks to you I have it. Thanks!
73
__
Elecraft mailing list
Home:
What do I do to enable fldigi to read the frequency from the K3?
In FLDigi select Configure and choose rig control. Then select the
Hamlib tabIn that window check the use Hamlib button, then in the
rig menu box select the Elecraft K3 (beta). The Device should be the
com port that
Here is my limited input on digital and Digipan. and in my
experience the K3 caters very well to this type of digital operation
using AFSK. The best when compared to any other rig I have tried or
owned.
On 11/21/2012 1:50 PM, Larry Royster wrote:
Hi from Julie KT4JR, writing from the
On 11/11/2012 11:09 AM, Pierfrancesco Caci wrote:
Mike == Mike Greenway k...@bellsouth.net writes:
Mike I quite often use a spot on my packet spots to just change
Mike band/modes. Often there is nothing in the spot window to get
Mike me to the band mode I desired so I was
Hi Jim
I dont believe that there is a menu item for separate level control for
the headphones relative to the speaker volume.
to adjust the transmit monitor level for sending either CW or phone
hold in the power control knob for half a second and it will now adjust
monitor level tap it
On 10/6/2012 5:15 PM, gold...@charter.net wrote:
I believe that I have an RF problem with the power setup. I have put
chokes in the power leads to the equipment but at certain times I can
hear the ferrites buzzing with either the digital code being sent of
matching my voice with SSB.
That
The temp starts at 35c and as I run it slowly creeps up to 55-57c and kicks
out with the error message of Pwr In High.
does it read 35 degrees C when the amp is cold? and is it that hot in
your shack?if this is the reading from a cold start I am guessing
the temp sensor is not
Yes there is a difference. But according to Amphenol spec sheet, Two
distinct types of 75 Ω BNC's are available, and both mate with each
other and with 50 Ω BNC's. the difference is in the dielectric
This I doubt will be an issue at IF frequency.
This is also backed up in the highly reliable
Congratulations good work.
You definitely have more patience than me.I have tried to resist
the temptation of cranking the power and usually fail. I find that
after some time calling QRP my fingers find their way to the power knob
and its back to full power. I will take your good
How about remote
I am going on a business trip in the near future for a solid week of
boardom, so I plan to leave my K3 at home and run it remotely using a
laptop and the internet provided in the hotel. Just not sure how to do
that yet.
On 9/13/2012 2:55 AM, John Lally wrote:
Horrid
H Mark
I play a fair bit if SSTV both using analogue and digital. for
analogue (Martin, Scottie etc. DM780 does just fine. I cant really
advise on how to implement switching mode for DM780 but Data A would be
the best choice. personally I am using MMSSTV and manually change rig
Is your speaker CONFIG:SPKRS set to 1 or 2. try setting to 2. as
noted in Freds book even with SPKRS set to 1 you will hear main and sub
on left and right but wont give you both ears with just the main and
wont allow AFX.
On 9/2/2012 9:55 AM, Mike K2MK wrote:
Hi Gordon,
It should
Hi
Ok setting the Bias for the mic is easy
Tap the menu button and rotate the VFO b until it displays mic select.
rotate VFO A to select the mic you are setting either FP or RP
pressing the 1 (also labeled A/B), the number is in red, button will
toggle between High and Low (H)igh
Anyone tried posting to the K3 yahoo group? it seems to be broken. it
says I have a virus or ISP issues. so tried it on work computer with a
different ISP and same issue. Please someone tell me its really not
just me.
__
Elecraft
This dongle looks identical to many being sold for less that $2.00 free
shipping that advertize as 7.1 with only stereo connections.If
anyone orders this Id be curious if its opened up as to what chip is
really in it.
On 8/23/2012 3:45 PM, Clint wrote:
I found an adaptor based on the
to recieveI
the MD command defines upper or lower sidband . so I need two different
sets of commands for 40m and down and 20 and up I wish there was a
way to set the K3 back to SSB to what ever sideband it was in before.
On 8/10/2012 8:57 PM, david Moes wrote:
I have a question for any
I have a question for any EasyPal users out there
I am using my K3 to send digital images with EasyPal with great success
but Id like to simplify my world
since many EasyPal users talk about the images being sent between
pictures I
find that I have to manually change between DIGI-A and SSB
Power Line TelecommunicationsPLT isnt an exclusive term to the RSGB
ARRL often refers to as PLT/BPL (broadband over Power Line in many
articles and communications to the FCC.FCC tightend the rules in US
but it is still a potential problem here and around the world.
On 7/31/2012
also become a bad habit.
David Moes
VE3DVY
On Monday 23/07/2012 at 9:43 am, Guy Olinger K2AV wrote:
In the later years, since the no-code decision in USA licensing
particularly, I have noted an increase of contest QSO's where the
other end
obviously copies 25 WPM somehow and only sends 8
Not sure what you are using but I can tell you that this is normal on
the K3since you are monitoring the output from the DSP that applies
EQ compression etc you are hearing the monitor with a slight delay that
is a perceived echo the advantage here is that you are hearing what
is
1 - 100 of 144 matches
Mail list logo
